Botao, Amit: Here are the builds we'll be looking at for the 12.07 android
release. Please boot test them as soon as possible, and respond with the
results. Once they are good, David will tag and rebuild them in the
-release branch, and respond with the new URLs. We'll then need to pick up
the new builds from those URLs and do the rest of the testing on them.
Please take this opportunity to also double-check the gcc version that was
used to build the kernel and make sure it's the 12.07 release of gcc.
Panda:
https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-til…
- Boot test on both 4430 and 4460
Snowball:
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-…
- Please check glmark2, it failed in the lava tests, but looks like it
was due to a networking glitch with linaro-android-test not detecting the
network in time. If this looks bad in the boot test, revert to build 369
and boot test it.
Origen:
https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-sa…
- Please check glmark2 on this one too. If this one doesn't look good,
revert to build 88
Vexpress-a9:
https://android-build.linaro.org/builds/~linaro-android/vexpress-ics-gcc47-…
Ryan/Tixy are testing the vexpress-tc2 release. Could one of you please
respond with the build URL? I couldn't seem to locate it. Also, after boot
testing, Zach may want it to be rebuilt in a -release branch. I'll defer
to him on that.
Thanks,
Paul Larson
Hello all:
Mathieu, Jayeeta and I just had a call and decided on the following:
1. Build 339 (https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-…)
will be used for the Linaro 12.06 cycle. The build has a WLAN and BT
regression that will be captured in a bug (sent later).
The build will contain
* Kernel 3.4
* Android 4.04 with MM acceleration working
* GCC 4.6 was used for building the kernel, Android and Binaries
This build will *not* be released on the igloocommunity.org due to regression.
2. Jayeeta's team will be investigating a solution to the WLAN and BT
regression including trying out a new set of binaries (vendor.tgz).
Once the issues are fixed, Jayeeta's team will issue a new build, test
it and release it on the Igloocommunity.org portal. At that point,
Linaro will release the same build as 12.06.1. No other changes are
expected.
Thanks,
Anmar
(including release team so they know what will be coming from the TI LT)
On Thu, Jun 21, 2012 at 12:56 PM, Ricardo Salveti
<ricardo.salveti(a)linaro.org> wrote:
> On Thu, Jun 21, 2012 at 12:28 PM, Andy Green <andy(a)warmcat.com> wrote:
>> Hi -
>>
>> Yes there'll be a tilt-3.4 tomorrow, we'll continue to work on it
>> history-style for as long as TI are interested in it. It should be in quite
>> good shape, we are hoping we finally identified and nailed the dss hdmi
>> problems with certain tvs/monitors. (in contrast, 3.5 is likely to go
>> downhill in terms of features, by TI decision).
>>
>> For once it might even suspend and resume, well, if sgx plays along.
>
> Cool, sounds good then.
>
> We should have packages for 3.4 and 3.5 then, but will be mostly using
> 3.4 for the LEB images.
>
> Thanks,
> --
> Ricardo Salveti de Araujo
--
Ricardo Salveti de Araujo
Hello All,
Linaro Image Tools source tar ball for the cycle 12.06 has been released
and is available at https://launchpad.net/linaro-image-tools/trunk/2012.06.
This release features:
* Improved linaro-media-create arguments validation to see if --hwpack
provided is a real file
* Improvements on FastModel support.
* Support in linaro-media-create to install missing packages on host system
with user consent
* Correction in the dependency python-testtools information
* Lot of Pep8 fixes
Fixed bugs:
727776 linaro-media-create doesn't check if --hwpack is a real file
1004199 Fast Model images must be a multiple of 1 MB
704029 linaro-media-create should not install packages on host system
without user consent
1015544 linaro-image-tools specifies incorrect dependency on
python-testtools
--
Thanks and Regards,
Deepti
Infrastructure Team Member, Linaro Platform Teams
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
Adding back in linaro-release just in case anyone else knows. If by "we"
you mean the QA team - no, we have brought all the boards we have available
(and even acquired a new vexpress board) but we do not have any mx6 boards
on the team. Sounds like we should order some though if we are going to
continue down this route. I'll followup with joey on that.
On Thu, May 31, 2012 at 9:27 AM, Fathi Boudra <fathi.boudra(a)linaro.org>wrote:
> On 31 May 2012 03:45, Paul Larson wrote:
> > Fathi, just to clarify, for the freescale android release we are going to
> > use
> > MX5:
> >
> https://android-build.linaro.org/builds/~linaro-android/imx53-ics-gcc47-fre…
> > MX6:
> > ???
>
> The main question is: do we? have i.MX6 board to run QA testing?
>
> > I see that the last tested according to [1] was
> >
> https://android-build.linaro.org/builds/~linaro-android/imx6-ics-gcc47-free…
> > but that is not one of the "release" builds. The previous one is also
> > ambiguous because it does not include the build number
> > (
> https://android-build.linaro.org/builds/~linaro-android/imx6-ics-gcc47-free…
> )
> > Bero: could you clarify which builds those were?
> >
> > Do either of these need to be rebuilt and retested? I'm thinking since
> the
> > mx5 one is already a -release one, it's good, but not sure what needs to
> be
> > done for mx6.
> > Thanks,
> > Paul Larson
> >
> > [1]
> >
> https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDE1M…
>
Adding Zach, linaro-release, and linaro-android.
Thanks for testing Botao.
Full results at
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV…
it looks like these are the ones that would most likely affect the
demo:
* https://bugs.launchpad.net/linaro-android/+bug/1004351 - No Google
Hangout notification shows up on Origen Android image.
- I'm assuming you just force the connect by opening the magic url though?
* https://bugs.launchpad.net/linaro-android/+bug/1004362 - Video can't be
played on Origen Android Google Hangout release.
- This doesn't affect hangout video it seems though?
* https://bugs.launchpad.net/linaro-android/+bug/1004411 - The USB works
unstable on Origen Android Google Hangout image.
Additionally, there is a problem with getting input from the mic. Botao,
is there a bug for that? I don't see it here but I could be just missing
it. If there is no fix available for that, then it looks like the demo may
have to be video only, and likely you'll want to set it up one time and not
disconnect/reconnect.
Thanks,
Paul Larson
On Fri, May 25, 2012 at 5:38 AM, Botao Sun <botao.sun(a)linaro.org> wrote:
> Hi Paul,
>
> Origen 12.05 Android Google Hangout release build test has been done,
> refer to this link to get the test result:
>
>
> https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV…
>
> Because my microphone never work on Origen board, then I didn't test the
> speech recorder feature; I also didn't test the BT headset since I don't
> have it. Android build scripts & Connectivity Manager didn't get tested as
> usual.
>
> Also, after first successfully working with Google Hangout, the standard
> sized USB port on my board stops to work, so I can't test the USB camera
> and USB host. However, the Mini USB port is still working, then I can use
> the ADB to install & test the Angry Bird.
>
> Bluetooth works well on this build, I can successfully send and receive
> files.
>
> For all the others, refer to that test result sheet to get more details.
>
> Thank you.
>
>
> BR
> Botao Sun
>
>
> On Fri, May 25, 2012 at 5:27 PM, Botao Sun <botao.sun(a)linaro.org> wrote:
>
>> Hi Paul,
>>
>> On build:
>>
>>
>> https://android-build.linaro.org/builds/~linaro-android/origen-hangout-demo…
>>
>> Here is summary for Google Hangout test:
>>
>> The hangout session can be established successfully between 2 Gmail
>> accounts. On host side (my laptop), both video & audio work well; on target
>> side (Origen board), video works well with my USB camera, but for audio, I
>> can hear the sound comes from my laptop, but I can't speak out. I tried to
>> connect my microphone to that J13 port (blue one), but whatever I did to
>> microphone, I hear nothing on my laptop side. I tried both ports - J12
>> (green one) & J13, but doesn't work. The microphone works well on my
>> laptop. My microphone never works with Origen board, so I
>> think probably the fault is caused by itself. If anyone can test the
>> microphone on Origen board on his / her side, that will be good.
>>
>> Another thing is about the hangout invitation notice. After I sent
>> invitation from laptop, there is no notice came out on Origen board. I need
>> to go into the Google Plus app, then enter "Stream", then the catch the
>> hangout session.
>>
>> FYI.
>>
>> Thanks.
>>
>>
>> BR
>> Botao Sun
>>
>> On Thu, May 24, 2012 at 12:04 AM, Fathi Boudra <fathi.boudra(a)linaro.org>wrote:
>>
>>> Hi Botao,
>>>
>>> the hangout build is a special releasd. Matt Waddel has updated
>>> Android QA test cases:
>>> https://wiki.linaro.org/Platform/QA/TestCases/Android#Google_Hangouts
>>>
>>> Feel free to contact him directly for any question related to this build.
>>>
>>> On 23 May 2012 15:01, Botao Sun <botao.sun(a)linaro.org> wrote:
>>> > Hi Fathi,
>>> >
>>> > Here is some additional information about the Samsung Origen hangout
>>> build:
>>> >
>>> > After enter the guild selection screen, if choose the first one -
>>> > "com.android.provision.DefaultActivity", the board then can enter the
>>> main
>>> > screen and everything works well. However, if choosing the second one
>>> "Setup
>>> > Wizard", then the problem I mentioned in previous email will come out.
>>> >
>>> > Another issue is once the board entered suspend mode, it can't be
>>> waked up
>>> > except power off & power on.
>>> >
>>> > Also, these 3 commands must be run before you plug the SD card to
>>> board.
>>> > Once a SD card booted up before, then an error about "mnt/app" already
>>> > exists will be occurred.
>>> >
>>> > wget http://people.linaro.org/~vishalbhoj/install-hangout.sh
>>> > chmod a+x install-hangout.sh
>>> > ./install-hangout.sh
>>> >
>>> > FYI.
>>> >
>>> > Thanks.
>>> >
>>> >
>>> > BR
>>> > Botao Sun
>>> >
>>> >
>>> > On Wed, May 23, 2012 at 9:43 PM, Botao Sun <botao.sun(a)linaro.org>
>>> wrote:
>>> >>
>>> >> Hi Fathi,
>>> >>
>>> >> For Samsung Origen builds:
>>> >>
>>> >> 1.
>>> >>
>>> https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-sa…
>>> :
>>> >> Boot works well.
>>> >>
>>> >> 2.
>>> >>
>>> https://android-build.linaro.org/builds/~linaro-android/origen-hangout-demo…
>>> :
>>> >> Serial console works well, but after walk through the guide, the LCD
>>> turned
>>> >> to black and finally entered to the suspend mode, can't wake it up. I
>>> tried
>>> >> twice, and same problem occurred. You can find the serial log in
>>> attachment.
>>> >>
>>> >> Also, for the hangout build, it can't install the vendor package,
>>> >> otherwise there would be no any display after press power button.
>>> >>
>>> >> Thanks.
>>> >>
>>> >>
>>> >> BR
>>> >> Botao Sun
>>> >>
>>> >> On Wed, May 23, 2012 at 8:14 PM, Abhishek Paliwal
>>> >> <abhishek.paliwal(a)linaro.org> wrote:
>>> >>>
>>> >>>
>>> >>>
>>> >>> On 23 May 2012 12:10, Fathi Boudra <fathi.boudra(a)linaro.org> wrote:
>>> >>>>
>>> >>>> http://review.android.git.linaro.org/#change,2165
>>> >>>>
>>> >>>>
>>> >>>>
>>> https://android-build.linaro.org/builds/~linaro-android/origen-hangout-demo…
>>> >>>>
>>> >>>>
>>> https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-sa…
>>> >>>
>>> >>>
>>> >>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-…
>>> >>>
>>> >>> Boots up fine , Booted from eMMC using new linaro-uboot , emmc image
>>> >>> created using lamc from mathieu's branch -
>>> >>> $ bzr branch
>>> lp:~mathieu.poirier/linaro-image-tools/linaro-image-tools
>>> >>>
>>> >>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> https://android-build.linaro.org/builds/~linaro-android/vexpress-ics-gcc47-…
>>> >>>
>>> >>> Boots up fine
>>> >>>
>>> >>>>
>>> >>>>
>>> https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-ics-g…
>>> >>>
>>> >>> Boots up fine
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> At the moment, only PandBoard build is missing.
>>> >>>
>>> >>>
>>> >>
>>> >
>>>
>>>
>>>
>>> --
>>> Fathi Boudra
>>> Linaro Release Manager | Validation Project Manager
>>> Linaro.org | Open source software for ARM SoCs
>>>
>>
>>
>
You've probably seen my partial results already before the release was cut,
but I've now finalised the results for vexpress here:
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFNmV…
I had a delay because RhythmBox was not playing MP3s due to plugins not
being installed. I believe this was a network problem rather than a
RhythmBox problem, so I haven't raised a defect.
Regards,
Ryan.
