CoreSight

coresight@lists.linaro.org

6 participants
2350 discussions

Start a nNew thread

comfortable sitting

by Lucas Mccarty

3 years, 11 months

#Invitation to bid

by Albert Bourla

3 years, 11 months

lists.linaro.org WARNING: The email account "coresight@lists.linaro.org" storage is almost full.

by cPanel on lists.linaro.org

The email account " coresight(a)lists.linaro.org " is almost full. The email account currently uses 91.68% (229.19 MB / 250 MB) of its capacity. You should remove some emails from the mailbox as soon as possible in order to prevent the loss of any future email. Use the Email Disk Usage tool at https://lists.linaro.org:2096/?goto_app=Email_DiskUsage , or ask the system administrator to upgrade your account to a larger quota. The system generated this warning on Friday, September 21, 2018 at 6:27:01 (UTC). You can disable the “Quota :: MailboxWarning” notice type through the cPanel interface: https://lists.linaro.org:2083/?goto_app=ContactInfo_Change Do not reply to this automated message.

3 years, 11 months

アカウント凍結通知

by ヨドバシ・ドット・コム

ヨドバシ.comについて重要なお知らせわが国にはさっていた。逃げた有望な医療産業があり、もともとはワクチン大国でした。コロナ禍で対応が遅れたのは、近年、政府のサポートが弱かったためであることを考えると、大きな前ているが、発送時進と言えます。コロナは足元で変異しており、さらにインフルエンザのように定着していくとみられるなか、ワクチン開発には第二幕、第三幕が必ずあります。今回の支援を基に日新型コロナウイルス感染症の国産ワクているが、発送時チン開発の遅れを教訓に、政府がまとめるワクチン開発・生産体制強化の新戦略の骨格が13日、明らかになった。国産ワクチンの開発を「長期、継続的にさっていた。逃げた取り組む国家戦略」と位置づけ、新たな技術によるワクチン開発を後押しするための研究開発拠点の形成や資金支援、治験環境の整備、薬事承認制度の見直しなどを盛り込む。製薬企業がリスクを恐れず開発を進められるよう、開発したワクチンの国による買い上げも担保する方針だ。

3 years, 11 months

CoreSight trace sometimes containing BAD_DECODE_PKT and INCOMPLETE_EOT

by Dominik Huber

Hello, I've successfully written a program that generates trace via sysFS, passes it to the decoder, and uses a callback function to utilize it afterward. When testing it by tracing a small test program over and over again I noticed that occasionally I get a CSD_ERR_BAD_DECODE_PKT-error message. In the few instances I was able to reproduce it the produced OCSD_GEN_TRC_ELEM_INSTR_RANGE packets were always correct and the error always occurred at the end in combination with an I_INCOMPLETE_EOT packet. Therefore, and because the error is very rare, I could just disable the error logger and my program would work, but if possible I would like to avoid that. Does anyone have an idea where the error might come from, whether I am doing something wrong, or where I could look for the cause? I've saved the binary trace data and decoded it using trc_pkt lister, and the output is almost the same, but the broken trace has a few additional lines and is missing one OCSD_GEN_TRC_ELEM_EO_TRACE-element: [equal trace data] + Idx:364; ID:10; [0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 ]; I_ASYNC : Alignment Synchronisation. + Idx:377; ID:10; [0x01 0x01 0x00 ]; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 } + Idx:380; ID:10; [0x9d 0x70 0x6a 0x0d 0x10 0x00 0x80 0xff 0xff ]; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0xFFFF8000100DD5C0; [equal trace only having varying Idx] + Idx:506; ID:10; [0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 ]; I_ASYNC : Alignment Synchronisation. + Idx:519; ID:10; [0x01 0x01 0x00 ]; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 } + Idx:522; ID:10; [0x9d 0x60 0x57 0xd1 0x10 ]; I_INCOMPLETE_EOT : Incomplete packet at end of trace.[I_ADDR_L_64IS0] + DCD_ETMV4_0016 : 0x0019 (OCSD_ERR_BAD_DECODE_PKT) [Reserved or unknown packet in decoder.]; TrcIdx=522; CS ID=10; Unknown packet type.Idx:522; ID:10; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) - Idx:471; ID:10; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) [Equal EOT trace: ] ID:10 END OF TRACE DATA Idx:0; ID:12; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:12 END OF TRACE DATA Idx:0; ID:14; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:14 END OF TRACE DATA Idx:0; ID:16; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:16 END OF TRACE DATA Idx:0; ID:17; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:17 END OF TRACE DATA Idx:0; ID:18; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:18 END OF TRACE DATA Idx:0; ID:1a; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:1a END OF TRACE DATA Idx:0; ID:1c; OCSD_GEN_TRC_ELEM_EO_TRACE( [end-of-trace]) ID:1c END OF TRACE DATA Trace Packet Lister : Trace buffer done, processed 5xx bytes. I've attached the full decoded traces as well. I don't know if it matters, but my trace very often contains a 0x0e Exceptions (apparently syscalls) but not in this run. Any insight on this would be appreciated. Thanks and regards, Dominik

3 years, 11 months

[RFC PATCH v3] perf cs-etm: Split Coresight decode by aux records

by James Clark

Populate the auxtrace queues using AUX records rather than whole auxtrace buffers. This is similar to the auxtrace_queues__process_index() -> auxtrace_queues__add_indexed_event() flow where perf_session__peek_event() is used to read AUXTRACE events out of random positions in the file based on the auxtrace index. Now there is a second pass using perf_session__peek_events() which loops over all PERF_RECORD_AUX events, finds the corresponding auxtrace buffer, and adds a fragment of that buffer to the auxtrace queues, rather than the whole buffer. This is a completely new implementation compared to v1 and v2 of the patchset where significant modifications were made to the decoding flow, including saving all of the AUX records, and changing the point where decoding started. These changes had effects on the outcome of decoding, but with this implementation, the output of decoding is identical to perf/core, except in the case where decoding failed due to the issue that this change addresses. No changes to decoding were made, apart from populating the auxtrace queues. Because the decoder is already reset between each auxtrace buffer, populating the queues with fragments of whole buffers based on AUX records has the same affect as resetting the decoder on the AUX record bounds during decode. But this approach only requires a change to one part of the whole flow, rather than many parts. There is still one TODO about how buffers are found. Currently there is a plain loop as a search, but this could be improved with a binary search or keeping a record of which buffers have already been added and starting the search from the last used place. AUX records and buffers will come in similar orders in the file so the latter would be simpler and probably be good enough. But I'm looking for feedback about the approach as a whole before ironing out all of the details. Other issues that were fixed by the previous patchsets such as fixing the case where the first aux record comes before the first MMAP record can now be fixed as completely independent issues. Testing ======= Testing was done with the following script, to diff the decoding results between the patched and un-patched versions of perf: #!/bin/bash set -ex $1 script -i $3 $4 > split.script $2 script -i $3 $4 > default.script diff split.script default.script | head -n 20 And it was run like this, with various itrace options depending on the quantity of synthesised events: compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns No changes in output were observed in the following scenarios: * Simple per-cpu perf record -e cs_etm/@tmc_etr0/u top * Per-thread, single thread perf record -e cs_etm/@tmc_etr0/u --per-thread ./threads_C * Per-thread multiple threads (but only one thread collected data): perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597 * Per-thread multiple threads (both threads collected data): perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597 * Per-cpu explicit threads: perf record -e cs_etm/@tmc_etr0/u --pid 853,854 * System-wide (per-cpu): perf record -e cs_etm/@tmc_etr0/u -a * No data collected (no aux buffers) Can happen with any command when run for a short period * Containing truncated records Can happen with any command * Containing aux records with 0 size Can happen with any command Snapshot mode still needs to be tested. Signed-off-by: James Clark <james.clark(a)arm.com> --- tools/perf/util/cs-etm.c | 151 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 148 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 64536a6ed10a..5d6c03488187 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -2679,6 +2679,153 @@ static u64 *cs_etm__create_meta_blk(u64 *buff_in, int *buff_in_offset, return metadata; } +/** + * Puts a fragment of an auxtrace buffer into the auxtrace queues based + * on the bounds of aux_event, if it matches with the buffer that's at + * file_offset. + * + * Normally, whole auxtrace buffers would be added to the queue. But we + * want to reset the decoder for every PERF_RECORD_AUX event, and the decoder + * is reset across each buffer, so splitting the buffers up in advance has + * the same effect. + */ +static int cs_etm__queue_aux_fragment(struct perf_session *session, + off_t file_offset, size_t sz, + struct perf_record_aux *aux_event, + struct perf_sample *sample) +{ + int err; + char buf[PERF_SAMPLE_MAX_SIZE]; + union perf_event *auxtrace_event_union; + struct perf_record_auxtrace *auxtrace_event; + union perf_event auxtrace_fragment; + bool matchesCpuPid; + struct cs_etm_auxtrace *etm = container_of(session->auxtrace, + struct cs_etm_auxtrace, + auxtrace); + + /* + * There should be a PERF_RECORD_AUXTRACE event at the file_offset that we got + * from looping through the auxtrace index. + */ + err = perf_session__peek_event(session, file_offset, buf, + PERF_SAMPLE_MAX_SIZE, &auxtrace_event_union, NULL); + if (err) + return err; + auxtrace_event = &auxtrace_event_union->auxtrace; + if (auxtrace_event->header.type != PERF_RECORD_AUXTRACE) + return -EINVAL; + + if (auxtrace_event->header.size < sizeof(struct perf_record_auxtrace) || + auxtrace_event->header.size != sz) { + return -EINVAL; + } + + /* + * In per-thread mode, CPU is set to -1, but TID will be set instead. + * See auxtrace_mmap_params__set_idx() + */ + if (auxtrace_event->cpu == (__u32) -1) + matchesCpuPid = auxtrace_event->tid == sample->tid; + else + matchesCpuPid = auxtrace_event->cpu == sample->cpu; + + if (matchesCpuPid && + aux_event->aux_offset >= auxtrace_event->offset && + aux_event->aux_offset + aux_event->aux_size <= + auxtrace_event->offset + auxtrace_event->size) { + /* + * If this AUX event was inside this buffer somewhere, create a new auxtrace event + * based on the sizes of the aux event, and queue that fragment. + */ + auxtrace_fragment.auxtrace = *auxtrace_event; + auxtrace_fragment.auxtrace.size = aux_event->aux_size; + auxtrace_fragment.auxtrace.offset = aux_event->aux_offset; + file_offset += aux_event->aux_offset - auxtrace_event->offset + + auxtrace_event->header.size; + return auxtrace_queues__add_event(&etm->queues, + session, + &auxtrace_fragment, + file_offset, + NULL); + } + + /* Wasn't inside this buffer, but there were no parse errors. 1 == 'not found' */ + return 1; +} + +static int cs_etm__queue_aux_records_cb(struct perf_session *session, + union perf_event *event, u64 offset __maybe_unused, + void *data __maybe_unused) +{ + struct perf_sample sample; + int ret; + struct auxtrace_index_entry *ent; + struct auxtrace_index *auxtrace_index; + struct evsel *evsel; + size_t i; + struct cs_etm_auxtrace *etm = container_of(session->auxtrace, + struct cs_etm_auxtrace, + auxtrace); + + /* Don't care about any other events, we're only queuing buffers for AUX events */ + if (event->header.type != PERF_RECORD_AUX) + return 0; + + if (event->header.size < sizeof(struct perf_record_aux)) + return -EINVAL; + + /* Truncated Aux records can have 0 size and shouldn't result in anything being queued. */ + if (!event->aux.aux_size) + return 0; + + /* + * Parse the sample, we need the sample_id_all data that comes after the event so that the + * CPU or PID can be matched to an AUXTRACE buffer's CPU or PID. + */ + evsel = evlist__event2evsel(session->evlist, event); + evsel__parse_sample(evsel, event, &sample); + + /* + * Loop throuch the auxtrace index to find the buffer that matches up with this + * aux event. + * TODO: binary search? + */ + list_for_each_entry(auxtrace_index, &session->auxtrace_index, list) { + for (i = 0; i < auxtrace_index->nr; i++) { + ent = &auxtrace_index->entries[i]; + ret = cs_etm__queue_aux_fragment(session, ent->file_offset, + ent->sz, &event->aux, &sample); + if (!ret) { + etm->data_queued = true; + return 0; + } else if (ret < 0) { + /* + * Anything other than 1 is an error. Positive values are 'not + * found' we just want to go onto the next one in that case. + */ + return ret; + } + } + } + + /* + * We would get here if there are no entries in the index (either no auxtrace buffers or + * no index). Fail silently as there is the possibility of queueing them in + * cs_etm__process_auxtrace_event() if etm->data_queued is still false; + * + * In that scenario, buffers will not be split by AUX records. + */ + return 0; +} + +static int cs_etm__queue_aux_records(struct perf_session *session) +{ + return perf_session__peek_events(session, session->header.data_offset, + session->header.data_size, + cs_etm__queue_aux_records_cb, NULL); +} + int cs_etm__process_auxtrace_info(union perf_event *event, struct perf_session *session) { @@ -2879,12 +3026,10 @@ int cs_etm__process_auxtrace_info(union perf_event *event, if (err) goto err_delete_thread; - err = auxtrace_queues__process_index(&etm->queues, session); + err = cs_etm__queue_aux_records(session); if (err) goto err_delete_thread; - etm->data_queued = etm->queues.populated; - return 0; err_delete_thread: -- 2.28.0

3 years, 11 months

[PATCH] coresight: Constify static attribute_group struct

by Shaokun Zhang

Make 'coresight_conns_group' const to allow the compiler to put it in read-only memory. Cc: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Suzuki K Poulose <suzuki.poulose(a)arm.com> Cc: Mike Leach <mike.leach(a)linaro.org> Cc: Leo Yan <leo.yan(a)linaro.org> Signed-off-by: Shaokun Zhang <zhangshaokun(a)hisilicon.com> --- drivers/hwtracing/coresight/coresight-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c index 34d2a2d31d00..34e944efc357 100644 --- a/drivers/hwtracing/coresight/coresight-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-sysfs.c @@ -28,7 +28,7 @@ static struct attribute *coresight_conns_attrs[] = { NULL, }; -static struct attribute_group coresight_conns_group = { +static const struct attribute_group coresight_conns_group = { .attrs = coresight_conns_attrs, .name = "connections", }; -- 2.7.4

3 years, 11 months

咨询物流报价

by 咨询物流报价

  你好   现有一批布匹，从广东东莞，运输到香港葵涌四号码头，85卷   2550kg 4CBM,请问具体怎么收费？ Best regards, Gack

3 years, 11 months

[PATCH 0/4] coresight: Add ETR-PERF polling.

by Daniel Kiss

This series adds a feature to ETR-PERF that sync the ETR buffer to perf periodically. This is really handy when the system wide trace is used because in this case the perf won't sync during the trace. In a per-thread setup the traced program might not go to the kernel frequvently enought to collect trace. Polling helps in both usecases. Can be used with strobing. Tuning polling period is challanging, I'm working on an additional patch that adds some metrics to help tune the polling period. Daniel Kiss (4): coresight: tmc-etr: Advance buffer pointer in sync buffer. coresight: tmc-etr: Track perf handler. coresight: etm-perf: Export etm_event_cpu_path. coresight: Add ETR-PERF polling. .../testing/sysfs-bus-coresight-devices-tmc | 8 + drivers/hwtracing/coresight/Makefile | 2 +- .../hwtracing/coresight/coresight-etm-perf.c | 10 +- .../hwtracing/coresight/coresight-etm-perf.h | 1 + .../coresight/coresight-etr-perf-polling.c | 316 ++++++++++++++++++ .../coresight/coresight-etr-perf-polling.h | 42 +++ .../hwtracing/coresight/coresight-tmc-core.c | 2 + .../hwtracing/coresight/coresight-tmc-etr.c | 22 +- drivers/hwtracing/coresight/coresight-tmc.h | 2 + 9 files changed, 401 insertions(+), 4 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-etr-perf-polling.c create mode 100644 drivers/hwtracing/coresight/coresight-etr-perf-polling.h -- 2.25.1

3 years, 11 months

邮件群发软件---不限制群发额度

by 邮件群发软件---不限制群发� ��度

  无任何限制，急速提升群发效率，让您发到爽，客户电话从此响不停！软件自动一秒钟发送一封，可以指定发件箱，客户看不到群发免费测试请联系： Q    Q ：3351665625 E-mail：bengpao6666(a)hotmail.com

3 years, 11 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight