March 2025 - Linux-stable-mirror

[PATCH v3 3/5] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v3: - collected tags Changes in v2: - collected tags drivers/phy/renesas/phy-rcar-gen3-usb2.c | 49 +++++++++++++----------- 1 file changed, 26 insertions(+), 23 deletions(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index aa9f301b5acb..39c73399b039 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops); -- 2.43.0

4 weeks, 1 day

1
0
0 0

[PATCH v3 1/5] phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v3: - collected tags Changes in v2: - collected tags drivers/phy/renesas/phy-rcar-gen3-usb2.c | 33 ++++++++++-------------- 1 file changed, 14 insertions(+), 19 deletions(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 775f4f973a6c..46afba2fe0dc 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -107,7 +107,6 @@ struct rcar_gen3_phy { struct rcar_gen3_chan *ch; u32 int_enable_bits; bool initialized; - bool otg_initialized; bool powered; }; @@ -320,16 +319,15 @@ static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch) return false; } -static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch) +static bool rcar_gen3_is_any_otg_rphy_initialized(struct rcar_gen3_chan *ch) { - int i; - - for (i = 0; i < NUM_OF_PHYS; i++) { - if (ch->rphys[i].otg_initialized) - return false; + for (enum rcar_gen3_phy_index i = PHY_INDEX_BOTH_HC; i <= PHY_INDEX_EHCI; + i++) { + if (ch->rphys[i].initialized) + return true; } - return true; + return false; } static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch) @@ -351,7 +349,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; - if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; if (sysfs_streq(buf, "host")) @@ -389,7 +387,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr, { struct rcar_gen3_chan *ch = dev_get_drvdata(dev); - if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" : @@ -402,6 +400,9 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) void __iomem *usb2_base = ch->base; u32 val; + if (!ch->is_otg_channel || rcar_gen3_is_any_otg_rphy_initialized(ch)) + return; + /* Should not use functions of read-modify-write a register */ val = readl(usb2_base + USB2_LINECTRL1); val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN | @@ -465,12 +466,9 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); - /* Initialize otg part */ - if (channel->is_otg_channel) { - if (rcar_gen3_needs_init_otg(channel)) - rcar_gen3_init_otg(channel); - rphy->otg_initialized = true; - } + /* Initialize otg part (only if we initialize a PHY with IRQs). */ + if (rphy->int_enable_bits) + rcar_gen3_init_otg(channel); rphy->initialized = true; @@ -486,9 +484,6 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) rphy->initialized = false; - if (channel->is_otg_channel) - rphy->otg_initialized = false; - val = readl(usb2_base + USB2_INT_ENABLE); val &= ~rphy->int_enable_bits; if (!rcar_gen3_is_any_rphy_initialized(channel)) -- 2.43.0

4 weeks, 1 day

1
0
0 0

[PATCH v2 6/7] media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval

by Mathis Foerst

Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval() and mt9m114_ifp_set_frame_interval(). [1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129 [2] Documentation/driver-api/media/v4l2-subdev.rst Fixes: 24d756e914fc ("media: i2c: Add driver for onsemi MT9M114 camera sensor") Cc: stable(a)vger.kernel.org Signed-off-by: Mathis Foerst <mathis.foerst(a)mt.com> --- drivers/media/i2c/mt9m114.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c index 18419de6491d..9ab1147a9aaf 100644 --- a/drivers/media/i2c/mt9m114.c +++ b/drivers/media/i2c/mt9m114.c @@ -1644,13 +1644,9 @@ static int mt9m114_ifp_get_frame_interval(struct v4l2_subdev *sd, if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; - mutex_lock(sensor->ifp.hdl.lock); - ival->numerator = 1; ival->denominator = sensor->ifp.frame_rate; - mutex_unlock(sensor->ifp.hdl.lock); - return 0; } @@ -1669,8 +1665,6 @@ static int mt9m114_ifp_set_frame_interval(struct v4l2_subdev *sd, if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; - mutex_lock(sensor->ifp.hdl.lock); - if (ival->numerator != 0 && ival->denominator != 0) sensor->ifp.frame_rate = min_t(unsigned int, ival->denominator / ival->numerator, @@ -1684,8 +1678,6 @@ static int mt9m114_ifp_set_frame_interval(struct v4l2_subdev *sd, if (sensor->streaming) ret = mt9m114_set_frame_rate(sensor); - mutex_unlock(sensor->ifp.hdl.lock); - return ret; } -- 2.34.1

4 weeks, 1 day

1
0
0 0

[PATCH 1/2] USB: serial: option: add Telit Cinterion FE990B compositions

by Fabio Porcedda

Add the following Telit Cinterion FE990B40 compositions: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable(a)vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda(a)gmail.com> --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 58bd54e8c483..8660f7a89b01 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1388,6 +1388,22 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x60) }, /* Telit FE990B (rmnet) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x30), + .driver_info = NCTRL(5) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x60) }, /* Telit FE990B (MBIM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x60) }, /* Telit FE990B (RNDIS) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x60) }, /* Telit FE990B (ECM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x30), + .driver_info = NCTRL(6) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ -- 2.48.1

4 weeks, 1 day

2
2
0 0

[tip: x86/urgent] x86/cacheinfo: Validate CPUID leaf 0x2 EDX output

by tip-bot2 for Ahmed S. Darwish

The following commit has been merged into the x86/urgent branch of tip: Commit-ID: 8177c6bedb7013cf736137da586cf783922309dd Gitweb: https://git.kernel.org/tip/8177c6bedb7013cf736137da586cf783922309dd Author: Ahmed S. Darwish <darwi(a)linutronix.de> AuthorDate: Tue, 04 Mar 2025 09:51:12 +01:00 Committer: Ingo Molnar <mingo(a)kernel.org> CommitterDate: Tue, 04 Mar 2025 09:59:14 +01:00 x86/cacheinfo: Validate CPUID leaf 0x2 EDX output CPUID leaf 0x2 emits one-byte descriptors in its four output registers EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most significant bit (MSB) of each register must be clear. The historical Git commit: 019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...") introduced leaf 0x2 output parsing. It only validated the MSBs of EAX, EBX, and ECX, but left EDX unchecked. Validate EDX's most-significant bit. Signed-off-by: Ahmed S. Darwish <darwi(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Cc: stable(a)vger.kernel.org Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de --- arch/x86/kernel/cpu/cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c index e6fa03e..a6c6bcc 100644 --- a/arch/x86/kernel/cpu/cacheinfo.c +++ b/arch/x86/kernel/cpu/cacheinfo.c @@ -808,7 +808,7 @@ void init_intel_cacheinfo(struct cpuinfo_x86 *c) cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]); /* If bit 31 is set, this is an unknown format */ - for (j = 0 ; j < 3 ; j++) + for (j = 0 ; j < 4 ; j++) if (regs[j] & (1 << 31)) regs[j] = 0;

4 weeks, 1 day

1
0
0 0

[PATCH V2 2/2] USB: serial: option: fix Telit Cinterion FE990A name

by Fabio Porcedda

The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Cc: stable(a)vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda(a)gmail.com> --- drivers/usb/serial/option.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8660f7a89b01..c52d6a2146ff 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1368,13 +1368,13 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, -- 2.48.1

4 weeks, 1 day

1
0
0 0

[PATCH v3 0/3] leds: rgb: leds-qcom-lpg: PWM fixes

by Abel Vesa

The PWM allow configuring the PWM resolution from 8 bits PWM values up to 15 bits values, for the Hi-Res PWMs, and then either 6-bit or 9-bit for the normal PWMs. The current implementation loops through all possible resolutions (PWM sizes), for the PWM subtype, on top of the already existing process of determining the prediv, exponent and refclk. The first and second issues are related to capping the computed PWM value. The third issue is that it uses the wrong maximum possible PWM value for determining the best matched period. Fix all of them. Signed-off-by: Abel Vesa <abel.vesa(a)linaro.org> --- Changes in v3: - Added a new patch that fixes the normal PWMs, since they now support 6-bit resolution as well. Added it as first patch. - Re-worded the second patch. Included Bjorn's suggestion and R-b tag. - Link to v2: https://lore.kernel.org/r/20250226-leds-qcom-lpg-fix-max-pwm-on-hi-res-v2-0… Changes in v2: - Re-worded the commit to drop the details that are not important w.r.t. what the patch is fixing. - Added another patch which fixes the resolution used for determining best matched period and PWM config. - Link to v1: https://lore.kernel.org/r/20250220-leds-qcom-lpg-fix-max-pwm-on-hi-res-v1-1… --- Abel Vesa (3): leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs drivers/leds/rgb/leds-qcom-lpg.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- base-commit: cd3215bbcb9d4321def93fea6cfad4d5b42b9d1d change-id: 20250220-leds-qcom-lpg-fix-max-pwm-on-hi-res-067e8782a79b Best regards, -- Abel Vesa <abel.vesa(a)linaro.org>

4 weeks, 1 day

3
6
0 0

[PATCH net 1/2] net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errata

by Andrei Botila

The most recent sillicon versions of TJA1120 and TJA1121 can achieve full silicon performance by putting the PHY in managed mode. It is necessary to apply these PHY writes before link gets established. Application of this fix is required after restart of device and wakeup from sleep. Cc: stable(a)vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila <andrei.botila(a)oss.nxp.com> --- drivers/net/phy/nxp-c45-tja11xx.c | 52 +++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c index 34231b5b9175..e083b1a714fd 100644 --- a/drivers/net/phy/nxp-c45-tja11xx.c +++ b/drivers/net/phy/nxp-c45-tja11xx.c @@ -22,6 +22,11 @@ #define PHY_ID_TJA_1103 0x001BB010 #define PHY_ID_TJA_1120 0x001BB031 +#define VEND1_DEVICE_ID3 0x0004 +#define TJA1120_DEV_ID3_SILICON_VERSION GENMASK(15, 12) +#define TJA1120_DEV_ID3_SAMPLE_TYPE GENMASK(11, 8) +#define DEVICE_ID3_SAMPLE_TYPE_R 0x9 + #define VEND1_DEVICE_CONTROL 0x0040 #define DEVICE_CONTROL_RESET BIT(15) #define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14) @@ -1593,6 +1598,50 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev) return 0; } +/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */ +static void nxp_c45_tja1120_errata(struct phy_device *phydev) +{ + int silicon_version, sample_type; + bool macsec_ability; + int phy_abilities; + int ret = 0; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_ID3); + if (ret < 0) + return; + + sample_type = FIELD_GET(TJA1120_DEV_ID3_SAMPLE_TYPE, ret); + if (sample_type != DEVICE_ID3_SAMPLE_TYPE_R) + return; + + silicon_version = FIELD_GET(TJA1120_DEV_ID3_SILICON_VERSION, ret); + + phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1, + VEND1_PORT_ABILITIES); + macsec_ability = !!(phy_abilities & MACSEC_ABILITY); + if ((!macsec_ability && silicon_version == 2) || + (macsec_ability && silicon_version == 1)) { + /* TJA1120/TJA1121 PHY configuration errata workaround. + * Apply PHY writes sequence before link up. + */ + if (!macsec_ability) { + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x4b95); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0xf3cd); + } else { + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x89c7); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0893); + } + + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x0476, 0x58a0); + + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x8921, 0xa3a); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x89F1, 0x16c1); + + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0); + } +} + static int nxp_c45_config_init(struct phy_device *phydev) { int ret; @@ -1609,6 +1658,9 @@ static int nxp_c45_config_init(struct phy_device *phydev) phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 1); phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 2); + if (phydev->drv->phy_id == PHY_ID_TJA_1120) + nxp_c45_tja1120_errata(phydev); + phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG, PHY_CONFIG_AUTO); -- 2.48.1

4 weeks, 1 day

1
1
0 0

[PATCH] reset: rzg2l-usbphy-ctrl: Correct reset status check

by Prabhakar

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Ensure the reset status check explicitly evaluates whether all bits in `port_mask` are set. Replace the double negation (`!!`) with an equality check to prevent incorrect interpretation of partial bit matches as an asserted reset. Fixes: bee08559701f ("reset: renesas: Add RZ/G2L usbphy control driver") Cc: stable(a)vger.kernel.org Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> --- drivers/reset/reset-rzg2l-usbphy-ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c index 8a7f167e405e..6451f621e862 100644 --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c @@ -88,7 +88,7 @@ static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; - return !!(readl(priv->base + RESET) & port_mask); + return (readl(priv->base + RESET) & port_mask) == port_mask; } static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { -- 2.43.0

4 weeks, 1 day

3
2
0 0

[PATCH v8] arm64: mm: Populate vmemmap at the page level if not section aligned

by Zhenhua Huang

On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set to 27, making one section 128M. The related page struct which vmemmap points to is 2M then. Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the vmemmap to populate at the PMD section level which was suitable initially since hot plug granule is always one section(128M). However, commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the existing arm64 assumptions. The first problem is that if start or end is not aligned to a section boundary, such as when a subsection is hot added, populating the entire section is wasteful. The next problem is if we hotplug something that spans part of 128 MiB section (subsections, let's call it memblock1), and then hotplug something that spans another part of a 128 MiB section(subsections, let's call it memblock2), and subsequently unplug memblock1, vmemmap_free() will clear the entire PMD entry which also supports memblock2 even though memblock2 is still active. Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the fix similar to x86-64: populate to pages levels if start/end is not aligned with section boundary. Cc: <stable(a)vger.kernel.org> # v5.4+ Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Signed-off-by: Zhenhua Huang <quic_zhenhuah(a)quicinc.com> --- Hi Catalin and David, Following our latest discussion, I've updated the patch for your review. I also removed Catalin's review tag since I've made significant modifications. arch/arm64/mm/mmu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index b4df5bc5b1b8..de05ccf47f21 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -1177,8 +1177,11 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, struct vmem_altmap *altmap) { WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); + /* [start, end] should be within one section */ + WARN_ON(end - start > PAGES_PER_SECTION * sizeof(struct page)); - if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES)) + if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES) || + (end - start < PAGES_PER_SECTION * sizeof(struct page))) return vmemmap_populate_basepages(start, end, node, altmap); else return vmemmap_populate_hugepages(start, end, node, altmap); -- 2.25.1

4 weeks, 1 day

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025