March 2025 - Linux-stable-mirror

[PATCH] ASoC: tegra: Fix ADX S24_LE audio format

by Thorsten Blum

Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") added support for the S24_LE audio format, but duplicated S16_LE in OUT_DAI() for ADX instead. Fix this by adding support for the S24_LE audio format. Compile-tested only. Cc: stable(a)vger.kernel.org Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- sound/soc/tegra/tegra210_adx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra210_adx.c b/sound/soc/tegra/tegra210_adx.c index 3e6e8f51f380..0aa93b948378 100644 --- a/sound/soc/tegra/tegra210_adx.c +++ b/sound/soc/tegra/tegra210_adx.c @@ -264,7 +264,7 @@ static const struct snd_soc_dai_ops tegra210_adx_out_dai_ops = { .rates = SNDRV_PCM_RATE_8000_192000, \ .formats = SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ - SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE, \ }, \ .capture = { \ @@ -274,7 +274,7 @@ static const struct snd_soc_dai_ops tegra210_adx_out_dai_ops = { .rates = SNDRV_PCM_RATE_8000_192000, \ .formats = SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ - SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE, \ }, \ .ops = &tegra210_adx_out_dai_ops, \ -- 2.48.1

4 weeks, 1 day

2
1
0 0

[PATCH v3 00/19] media: i2c: ds90ub9xx: Error handling, UB9702 improvements

by Jai Luthra

Hi, This series has two main parts: 1) add error handling all around, and 2) update the drivers according to latest (mostly non-public) information from TI. Signed-off-by: Jai Luthra <jai.luthra(a)ideasonboard.com> --- Changes in v3: - Now that this series is closer to being merged, squash "Remove old ub9702 RX port init code (SQUASH)" and "Update UB9702 init sequences" as they were only split to ease review. - Drop SSCG bindings and driver changes. - Fix Sakari's minor review comments on "Speed-up I2C watchdog timer". - Link to v2: https://lore.kernel.org/r/20250124-ub9xx-improvements-v2-0-f7075c99ea20@ide… --- Jai Luthra (4): media: i2c: ds90ub953: Speed-up I2C watchdog timer media: dt-bindings: ti,ds90ub960: Allow setting serializer address media: i2c: ds90ub960: Configure serializer using back-channel media: i2c: ds90ub9xx: Set serializer temperature ramp Tomi Valkeinen (15): media: i2c: ds90ub953: Fix error prints media: i2c: ds90ub913: Fix returned fmt from .set_fmt() media: i2c: ds90ub913: Align ub913_read() with other similar functions media: i2c: ds90ub9xx: Add err parameter to read/write funcs media: i2c: ds90ub960: Add error handling to multiple places media: i2c: ds90ub953: Add error handling to ub953_log_status() media: i2c: ds90ub913: Add error handling to ub913_log_status() media: i2c: ds90ub960: Move UB9702 registers to a separate section media: i2c: ds90ub960: Add UB9702 specific registers media: i2c: ds90ub960: Split ub960_init_tx_ports() media: i2c: ds90ub960: Refresh ub960_init_tx_ports_ub9702() media: i2c: ds90ub960: Add RX port iteration support media: i2c: ds90ub960: Move all RX port init code into ub960_init_rx_ports() media: i2c: ds90ub960: Update UB9702 init sequences media: i2c: ds90ub953: Move reg defines to a header file .../bindings/media/i2c/ti,ds90ub953.yaml | 77 +- .../bindings/media/i2c/ti,ds90ub960.yaml | 16 +- drivers/media/i2c/ds90ub913.c | 82 +- drivers/media/i2c/ds90ub953.c | 242 ++- drivers/media/i2c/ds90ub953.h | 104 + drivers/media/i2c/ds90ub960.c | 2166 +++++++++++++++----- 6 files changed, 1966 insertions(+), 721 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250303-b4-ub9xx-err-handling-57a89508ea5e Best regards, -- Jai Luthra <jai.luthra(a)ideasonboard.com>

4 weeks, 1 day

3
21
0 0

[PATCH v3 4/6] wifi: mt76: mt7925: remove unused acpi function for clc

by Mingyen Hsieh

From: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> The code for handling ACPI configuration in CLC was copied from the mt7921 driver but is not utilized in the mt7925 implementation. So removes the unused functionality to clean up the codebase. Cc: stable(a)vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> --- v2-v3: no change --- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c index 53c67364fac6..03b516db68da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c @@ -3421,7 +3421,6 @@ __mt7925_mcu_set_clc(struct mt792x_dev *dev, u8 *alpha2, .idx = idx, .env = env_cap, - .acpi_conf = mt792x_acpi_get_flags(&dev->phy), }; int ret, valid_cnt = 0; u8 *pos, *last_pos; -- 2.34.1

4 weeks, 1 day

1
0
0 0

[PATCH 1/1] usb: xhci: Fix host controllers "dying" after suspend and resume

by Mathias Nyman

From: Michal Pecio <michal.pecio(a)gmail.com> A recent cleanup went a bit too far and dropped clearing the cycle bit of link TRBs, so it stays different from the rest of the ring half of the time. Then a race occurs: if the xHC reaches such link TRB before more commands are queued, the link's cycle bit unintentionally matches the xHC's cycle so it follows the link and waits for further commands. If more commands are queued before the xHC gets there, inc_enq() flips the bit so the xHC later sees a mismatch and stops executing commands. This function is called before suspend and 50% of times after resuming the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint command fails to complete in 5 seconds and this shows up xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:10.0: HC died; cleaning up followed by loss of all USB decives on the affected bus. That's if you are lucky, because if Set Deq gets stuck instead, the failure is silent. Likely responsible for kernel bug 219824. I found this while searching for possible causes of that regression and reproduced it locally before hearing back from the reporter. To repro, simply wait for link cycle to become set (debugfs), then suspend, resume and wait. To accelerate the failure I used a script which repeatedly starts and stops a UVC camera. Some HCs get fully reinitialized on resume and they are not affected. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824 Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()") Cc: stable(a)vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 45653114ccd7..1a90ebc8a30e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -780,8 +780,12 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) struct xhci_segment *seg; ring = xhci->cmd_ring; - xhci_for_each_ring_seg(ring->first_seg, seg) + xhci_for_each_ring_seg(ring->first_seg, seg) { + /* erase all TRBs before the link */ memset(seg->trbs, 0, sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); + /* clear link cycle bit */ + seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= cpu_to_le32(~TRB_CYCLE); + } xhci_initialize_ring_info(ring); /* -- 2.43.0

4 weeks, 1 day

1
0
0 0

[PATCH] qlcnic: fix a memory leak in qlcnic_sriov_set_guest_vlan_mode()

by Haoxiang Li

Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index f9dd50152b1e..2c01a9ad444f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -454,8 +454,10 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter, num_vlans = sriov->num_allowed_vlans; sriov->allowed_vlans = kcalloc(num_vlans, sizeof(u16), GFP_KERNEL); - if (!sriov->allowed_vlans) + if (!sriov->allowed_vlans) { + qlcnic_sriov_free_vlans(adapter); return -ENOMEM; + } vlans = (u16 *)&cmd->rsp.arg[3]; for (i = 0; i < num_vlans; i++) -- 2.25.1

4 weeks, 1 day

2
1
0 0

[PATCH 2/3] drm/xe/hmm: Don't dereference struct page pointers without notifier lock

by Thomas Hellström

The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr") Cc: Oak Zeng <oak.zeng(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.10+ Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/gpu/drm/xe/xe_hmm.c | 115 ++++++++++++++++++++++++++---------- 1 file changed, 85 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_hmm.c b/drivers/gpu/drm/xe/xe_hmm.c index c56738fa713b..d3b5551496d0 100644 --- a/drivers/gpu/drm/xe/xe_hmm.c +++ b/drivers/gpu/drm/xe/xe_hmm.c @@ -42,6 +42,36 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) } } +static int xe_alloc_sg(struct sg_table *st, struct hmm_range *range, + struct rw_semaphore *notifier_sem) +{ + unsigned long i, npages, hmm_pfn; + unsigned long num_chunks = 0; + int ret; + + /* HMM docs says this is needed. */ + ret = down_read_interruptible(notifier_sem); + if (ret) + return ret; + + if (mmu_interval_read_retry(range->notifier, range->notifier_seq)) + return -EAGAIN; + + npages = xe_npages_in_range(range->start, range->end); + for (i = 0; i < npages;) { + hmm_pfn = range->hmm_pfns[i]; + if (!(hmm_pfn & HMM_PFN_VALID)) { + up_read(notifier_sem); + return -EFAULT; + } + num_chunks++; + i += 1UL << hmm_pfn_to_map_order(hmm_pfn); + } + up_read(notifier_sem); + + return sg_alloc_table(st, num_chunks, GFP_KERNEL); +} + /** * xe_build_sg() - build a scatter gather table for all the physical pages/pfn * in a hmm_range. dma-map pages if necessary. dma-address is save in sg table @@ -50,6 +80,7 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) * @range: the hmm range that we build the sg table from. range->hmm_pfns[] * has the pfn numbers of pages that back up this hmm address range. * @st: pointer to the sg table. + * @notifier_sem: The xe notifier lock. * @write: whether we write to this range. This decides dma map direction * for system pages. If write we map it bi-diretional; otherwise * DMA_TO_DEVICE @@ -76,38 +107,33 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) * Returns 0 if successful; -ENOMEM if fails to allocate memory */ static int xe_build_sg(struct xe_device *xe, struct hmm_range *range, - struct sg_table *st, bool write) + struct sg_table *st, + struct rw_semaphore *notifier_sem, + bool write) { struct device *dev = xe->drm.dev; - struct page **pages; - u64 i, npages; - int ret; - - npages = xe_npages_in_range(range->start, range->end); - pages = kvmalloc_array(npages, sizeof(*pages), GFP_KERNEL); - if (!pages) - return -ENOMEM; - - for (i = 0; i < npages; i++) { - pages[i] = hmm_pfn_to_page(range->hmm_pfns[i]); - xe_assert(xe, !is_device_private_page(pages[i])); - } - - ret = sg_alloc_table_from_pages_segment(st, pages, npages, 0, npages << PAGE_SHIFT, - xe_sg_segment_size(dev), GFP_KERNEL); - if (ret) - goto free_pages; - - ret = dma_map_sgtable(dev, st, write ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE, - DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_NO_KERNEL_MAPPING); - if (ret) { - sg_free_table(st); - st = NULL; + unsigned long hmm_pfn, size; + struct scatterlist *sgl; + struct page *page; + unsigned long i, j; + + lockdep_assert_held(notifier_sem); + + i = 0; + for_each_sg(st->sgl, sgl, st->nents, j) { + hmm_pfn = range->hmm_pfns[i]; + page = hmm_pfn_to_page(hmm_pfn); + xe_assert(xe, !is_device_private_page(page)); + size = 1UL << hmm_pfn_to_map_order(hmm_pfn); + sg_set_page(sgl, page, size << PAGE_SHIFT, 0); + if (unlikely(j == st->nents - 1)) + sg_mark_end(sgl); + i += size; } + xe_assert(xe, i == xe_npages_in_range(range->start, range->end)); -free_pages: - kvfree(pages); - return ret; + return dma_map_sgtable(dev, st, write ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE, + DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_NO_KERNEL_MAPPING); } /** @@ -235,16 +261,45 @@ int xe_hmm_userptr_populate_range(struct xe_userptr_vma *uvma, if (ret) goto free_pfns; - ret = xe_build_sg(vm->xe, &hmm_range, &userptr->sgt, write); + if (unlikely(userptr->sg)) { + ret = down_write_killable(&vm->userptr.notifier_lock); + if (ret) + goto free_pfns; + + xe_hmm_userptr_free_sg(uvma); + up_write(&vm->userptr.notifier_lock); + } + + ret = xe_alloc_sg(&userptr->sgt, &hmm_range, &vm->userptr.notifier_lock); if (ret) goto free_pfns; + ret = down_read_interruptible(&vm->userptr.notifier_lock); + if (ret) + goto free_st; + + if (mmu_interval_read_retry(hmm_range.notifier, hmm_range.notifier_seq)) { + ret = -EAGAIN; + goto out_unlock; + } + + ret = xe_build_sg(vm->xe, &hmm_range, &userptr->sgt, + &vm->userptr.notifier_lock, write); + if (ret) + goto out_unlock; + xe_mark_range_accessed(&hmm_range, write); userptr->sg = &userptr->sgt; userptr->notifier_seq = hmm_range.notifier_seq; + up_read(&vm->userptr.notifier_lock); + kvfree(pfns); + return 0; +out_unlock: + up_read(&vm->userptr.notifier_lock); +free_st: + sg_free_table(&userptr->sgt); free_pfns: kvfree(pfns); return ret; } - -- 2.48.1

4 weeks, 1 day

2
4
0 0

[PATCH 6.1 0/2] erofs: handle overlapped pclusters out of crafted images properly

by Alexey Panov

Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") fixes CVE-2024-47736 [1] but brings another problem [2]. So commit 1a2180f6859c ("erofs: fix PSI memstall accounting") should be backported too. [1] https://nvd.nist.gov/vuln/detail/CVE-2024-47736 [2] https://lore.kernel.org/all/CAKPOu+8tvSowiJADW2RuKyofL_CSkm_SuyZA7ME5vMLWmL… Gao Xiang (2): erofs: handle overlapped pclusters out of crafted images properly erofs: fix PSI memstall accounting fs/erofs/zdata.c | 66 +++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 32 deletions(-) -- 2.39.5

4 weeks, 1 day

5
12
0 0

[PATCH v2 6.1 0/2] erofs: handle overlapped pclusters out of crafted images properly

by Alexey Panov

Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") fixes CVE-2024-47736 [1] but brings another problem [2]. So commit 1a2180f6859c ("erofs: fix PSI memstall accounting") should be backported too. The backport follows linux 6.6.y conflict resolution changes of struct folio -> struct page from 1bf7e414cac3 ("erofs: handle overlapped pclusters out of crafted images properly"). --- v2: Corrected patch comment about a minor fix. I mistakenly assessed the significance of the changes relative to the backport from 6.6.y. [1] https://nvd.nist.gov/vuln/detail/CVE-2024-47736 [2] https://lore.kernel.org/all/CAKPOu+8tvSowiJADW2RuKyofL_CSkm_SuyZA7ME5vMLWmL… Gao Xiang (2): erofs: handle overlapped pclusters out of crafted images properly erofs: fix PSI memstall accounting fs/erofs/zdata.c | 66 +++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 32 deletions(-) -- 2.39.5

4 weeks, 1 day

1
2
0 0

[PATCH v3 5/5] phy: renesas: rcar-gen3-usb2: Set timing registers only once

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v3: - collected tags Changes in v2: - collected tags drivers/phy/renesas/phy-rcar-gen3-usb2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index c663910d6163..617962a51e81 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -467,8 +467,11 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; writel(val, usb2_base + USB2_INT_ENABLE); - writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); - writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); + + if (!rcar_gen3_is_any_rphy_initialized(channel)) { + writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); + writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); + } /* Initialize otg part (only if we initialize a PHY with IRQs). */ if (rphy->int_enable_bits) -- 2.43.0

4 weeks, 1 day

1
0
0 0

[PATCH v3 4/5] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v3: - collected tags Changes in v2: - collected tags - add an empty line after definition of val to get rid of the checkpatch.pl warning drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 39c73399b039..c663910d6163 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus); -- 2.43.0

4 weeks, 1 day

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025