- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next] selftests: net: vxlan: Fix selftest after changes in iproute2.

by Vladimir Nikishkin

1. Make test_vxlan_nolocalbypass.sh uses ip -j JSON output. 2. Make sure that vxlan nolocalbypass tests pass with the upstream iproute2. Signed-off-by: Vladimir Nikishkin <vladimir(a)nikishkin.pw> --- This is version 0. As suggested in the mailing list, fix tests after the change to iproute2 is accepted. tools/testing/selftests/net/test_vxlan_nolocalbypass.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh index 46067db53068..1189842c188b 100755 --- a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh +++ b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh @@ -130,7 +130,7 @@ nolocalbypass() run_cmd "tc -n ns1 qdisc add dev lo clsact" run_cmd "tc -n ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop" - run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'" log_test $? 0 "localbypass enabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" @@ -140,7 +140,7 @@ nolocalbypass() run_cmd "ip -n ns1 link set dev vx0 type vxlan nolocalbypass" - run_cmd "ip -n ns1 -d link show dev vx0 | grep 'nolocalbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == false'" log_test $? 0 "localbypass disabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" @@ -150,7 +150,7 @@ nolocalbypass() run_cmd "ip -n ns1 link set dev vx0 type vxlan localbypass" - run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'" log_test $? 0 "localbypass enabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" -- 2.35.8 -- Fastmail.

2 years, 4 months

2
1
0 0

[PATCH v3] selftests/input: Introduce basic tests for evdev ioctls

by Enric Balletbo i Serra

This provides a basic infrastructure for the creation of tests for the evdev interface. Most of this code is adapted from the libevdev wrapper library. While most of evdev ioctls are covered and tested using libevdev tests there are some evdev ioctls that aren't because are not supported (and will not be supported) by libevdev [1]. So, adding, at least those tests, would make sense. The test creates an uinput device (and an evdev device) so you can call the wanted ioctl from userspace. So, to run those tests you need to have support for uinput and evdev as well. [1] For example, libevdev doesn't support setting EV_REP because it's inherently racy - one libevdev context to set those values via the ioctl would cause all other libevdev contexts on the same device to be out of sync. Since we do not get notifications when the values changed, libevdev's buffered values for EV_REP will remain whatever they were initially. Signed-off-by: Enric Balletbo i Serra <eballetbo(a)kernel.org> Acked-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Test output: TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.eviocgname_get_device_name ... # OK global.eviocgname_get_device_name ok 1 global.eviocgname_get_device_name # RUN global.eviocgrep_get_repeat_settings ... # OK global.eviocgrep_get_repeat_settings ok 2 global.eviocgrep_get_repeat_settings # RUN global.eviocsrep_set_repeat_settings ... # OK global.eviocsrep_set_repeat_settings ok 3 global.eviocsrep_set_repeat_settings # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Changes since v1: - As UI_GET_SYSNAME has been around 3.15 remove the fallback code that pre-dates that ioctl. - Fix a bug in the va-args handling in selftest_uinput_create_device calls. - Fix typo s/an/and - Implement a test case for EVIOCSREP. Changes since v2: - Fix a buf left in the va-args handling in selftest_uinput_create_device calls. - Replace fetch_syspath_and_devnode() function to open_devnode() function that return the openend file descriptor, so we can reduce the code. tools/testing/selftests/Makefile | 1 + tools/testing/selftests/input/.gitignore | 2 + tools/testing/selftests/input/Makefile | 5 + tools/testing/selftests/input/config | 3 + tools/testing/selftests/input/evioc-test.c | 237 +++++++++++++++++++++ 5 files changed, 248 insertions(+) create mode 100644 tools/testing/selftests/input/.gitignore create mode 100644 tools/testing/selftests/input/Makefile create mode 100644 tools/testing/selftests/input/config create mode 100644 tools/testing/selftests/input/evioc-test.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 90a62cf75008..29fc77168aa7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += futex TARGETS += gpio TARGETS += hid TARGETS += intel_pstate +TARGETS += input TARGETS += iommu TARGETS += ipc TARGETS += ir diff --git a/tools/testing/selftests/input/.gitignore b/tools/testing/selftests/input/.gitignore new file mode 100644 index 000000000000..37f5dff3255b --- /dev/null +++ b/tools/testing/selftests/input/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +evioc-test diff --git a/tools/testing/selftests/input/Makefile b/tools/testing/selftests/input/Makefile new file mode 100644 index 000000000000..031729be0628 --- /dev/null +++ b/tools/testing/selftests/input/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS += -D_GNU_SOURCE -std=gnu99 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES) + +TEST_GEN_PROGS := evioc-test +include ../lib.mk diff --git a/tools/testing/selftests/input/config b/tools/testing/selftests/input/config new file mode 100644 index 000000000000..b7512f3e6d8d --- /dev/null +++ b/tools/testing/selftests/input/config @@ -0,0 +1,3 @@ +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_UINPUT=m diff --git a/tools/testing/selftests/input/evioc-test.c b/tools/testing/selftests/input/evioc-test.c new file mode 100644 index 000000000000..ad7b93fe39cf --- /dev/null +++ b/tools/testing/selftests/input/evioc-test.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2023 Red Hat, Inc. + * + * Part of the code in this file is inspired and copied from the libevdev wrapper library + * for evdev devices written by Peter Hutterer. + */ + +#include <dirent.h> +#include <errno.h> +#include <fcntl.h> +#include <linux/uinput.h> +#include <poll.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/stat.h> +#include <time.h> +#include <unistd.h> + +#include "../kselftest_harness.h" + +#define TEST_DEVICE_NAME "selftest input device" + +struct selftest_uinput { + int uinput_fd; /** file descriptor to uinput */ + int evdev_fd; /** file descriptor to evdev */ +}; + +static int is_event_device(const struct dirent *dent) +{ + return strncmp("event", dent->d_name, 5) == 0; +} + +static int open_devnode(struct selftest_uinput *uidev) +{ +#define SYS_INPUT_DIR "/sys/devices/virtual/input/" + char buf[sizeof(SYS_INPUT_DIR) + 64] = SYS_INPUT_DIR; + struct dirent **namelist; + char *devnode = NULL; + int ndev, i; + int rc; + + rc = ioctl(uidev->uinput_fd, + UI_GET_SYSNAME(sizeof(buf) - strlen(SYS_INPUT_DIR)), + &buf[strlen(SYS_INPUT_DIR)]); + if (rc == -1) { + fprintf(stderr, "cannot get the sysfs name of the uinput device (%d)\n", rc); + return rc; + } + + ndev = scandir(buf, &namelist, is_event_device, alphasort); + if (ndev <= 0) + return -1; + + /* ndev should only ever be 1 */ + + for (i = 0; i < ndev; i++) { + if (!devnode && asprintf(&devnode, "/dev/input/%s", + namelist[i]->d_name) == -1) + devnode = NULL; + free(namelist[i]); + } + + free(namelist); + + return open(devnode, O_RDONLY); +#undef SYS_INPUT_DIR +} + +static void selftest_uinput_destroy(struct selftest_uinput *uidev) +{ + if (!uidev) + return; + + if (uidev->uinput_fd >= 0) + ioctl(uidev->uinput_fd, UI_DEV_DESTROY, NULL); + + close(uidev->evdev_fd); + close(uidev->uinput_fd); + + free(uidev); +} + +static int selftest_uinput_create_device(struct selftest_uinput **uidev, ...) +{ + struct selftest_uinput *new_device; + struct uinput_setup setup; + va_list args; + int rc, fd; + int type; + + new_device = calloc(1, sizeof(struct selftest_uinput)); + if (!new_device) + return -ENOMEM; + + memset(&setup, 0, sizeof(setup)); + strncpy(setup.name, TEST_DEVICE_NAME, UINPUT_MAX_NAME_SIZE - 1); + setup.id.vendor = 0x1234; /* sample vendor */ + setup.id.product = 0x5678; /* sample product */ + setup.id.bustype = BUS_USB; + + fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK); + if (fd < 0) { + fprintf(stderr, "cannot open uinput (%d): %m\n", errno); + goto error; + } + + va_start(args, uidev); + rc = 0; + do { + type = va_arg(args, int); + if (type == -1) + break; + rc = ioctl(fd, UI_SET_EVBIT, type); + } while (rc == 0); + va_end(args); + + rc = ioctl(fd, UI_DEV_SETUP, &setup); + if (rc == -1) + goto error; + + rc = ioctl(fd, UI_DEV_CREATE, NULL); + if (rc == -1) + goto error; + + new_device->uinput_fd = fd; + + fd = open_devnode(new_device); + if (fd < 0) { + fprintf(stderr, "cannot open event device node (%d): %m\n", errno); + goto error; + } + + new_device->evdev_fd = fd; + *uidev = new_device; + + return 0; + +error: + rc = -errno; + selftest_uinput_destroy(new_device); + return rc; +} + +TEST(eviocgname_get_device_name) +{ + struct selftest_uinput *uidev; + char buf[256]; + int rc; + + rc = selftest_uinput_create_device(&uidev); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + memset(buf, 0, sizeof(buf)); + /* ioctl to get the name */ + rc = ioctl(uidev->evdev_fd, EVIOCGNAME(sizeof(buf) - 1), buf); + ASSERT_GE(rc, 0); + ASSERT_STREQ(TEST_DEVICE_NAME, buf); + + selftest_uinput_destroy(uidev); +} + +TEST(eviocgrep_get_repeat_settings) +{ + struct selftest_uinput *uidev; + int rep_values[2]; + int rc; + + memset(rep_values, 0, sizeof(rep_values)); + + rc = selftest_uinput_create_device(&uidev, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + /* should fail because EV_REP is not set */ + ASSERT_EQ(-1, rc); + + selftest_uinput_destroy(uidev); + + rc = selftest_uinput_create_device(&uidev, EV_REP, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + ASSERT_EQ(0, rc); + /* should get the default delay and period values set by the kernel */ + ASSERT_EQ(rep_values[0], 250); + ASSERT_EQ(rep_values[1], 33); + + selftest_uinput_destroy(uidev); +} + +TEST(eviocsrep_set_repeat_settings) +{ + struct selftest_uinput *uidev; + int rep_values[2]; + int rc; + + memset(rep_values, 0, sizeof(rep_values)); + + rc = selftest_uinput_create_device(&uidev, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to set the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values); + /* should fail because EV_REP is not set */ + ASSERT_EQ(-1, rc); + + selftest_uinput_destroy(uidev); + + rc = selftest_uinput_create_device(&uidev, EV_REP, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to set the repeat rates values */ + rep_values[0] = 500; + rep_values[1] = 200; + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values); + ASSERT_EQ(0, rc); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + ASSERT_EQ(0, rc); + /* should get the delay and period values set previously */ + ASSERT_EQ(rep_values[0], 500); + ASSERT_EQ(rep_values[1], 200); + + selftest_uinput_destroy(uidev); +} + +TEST_HARNESS_MAIN -- 2.40.1

2 years, 4 months

1
0
0 0

[PATCH 0/4] selftests/nolibc: fix up and improve test report

by Zhangjin Wu

Hi, Willy Thanks very much for your merge of the v3 generic part1 of rv32, just tested your latest 20230604-nolibc-rv32+stkp6 branch, everything work well except a trivial test report regression on the 'run' target. Besides the fixup, a standalone test-report target added to share them among run, run-user and re-run and allow independent test report check via direct 'make test-report'. Best regards, Zhangjin --- Zhangjin Wu (4): selftests/nolibc: add a test-report target selftests/nolibc: allow run test-report directly selftests/nolibc: always print the log file selftests/nolibc: fix up test-report for run target tools/testing/selftests/nolibc/Makefile | 30 ++++++++++++------------- 1 file changed, 15 insertions(+), 15 deletions(-) -- 2.25.1

2 years, 4 months

2
15
0 0

[PATCH v3 0/4] tracing/user_events: Add empty arguments events

by sunliming

This series patches fix the incorrect trace record for empty arguments events and add correspondent selftests. V3: Improve modification descriptions to maintain consistent formatting v2: Change "i->count" to "i->count !=0 " to prevent compiler optimization Add correspondent selftests sunliming (4): tracing/user_events: Fix the incorrect trace record for empty arguments events selftests/user_events: Add ftrace self-test for empty arguments events selftests/user_events: Clear the events after perf self-test selftests/user_events: Add perf self-test for empty arguments events kernel/trace/trace_events_user.c | 4 +- .../selftests/user_events/ftrace_test.c | 33 ++++++++ .../testing/selftests/user_events/perf_test.c | 82 +++++++++++++++++++ 3 files changed, 117 insertions(+), 2 deletions(-) -- 2.25.1

2 years, 4 months

3
6
0 0

[PATCH v4 1/3] docs: sound: add 'pcmtest' driver documentation

by Ivan Orlov

Add documentation for the new Virtual PCM Test Driver. It covers all possible usage cases: errors and delay injections, random and pattern-based data generation, playback and ioctl redefinition functionalities testing. We have a lot of different virtual media drivers, which can be used for testing of the userspace applications and media subsystem middle layer. However, all of them are aimed at testing the video functionality and simulating the video devices. For audio devices we have only snd-dummy module, which is good in simulating the correct behavior of an ALSA device. I decided to write a tool, which would help to test the userspace ALSA programs (and the PCM middle layer as well) under unusual circumstances to figure out how they would behave. So I came up with this Virtual PCM Test Driver. This new Virtual PCM Test Driver has several features which can be useful during the userspace ALSA applications testing/fuzzing, or testing/fuzzing of the PCM middle layer. Not all of them can be implemented using the existing virtual drivers (like dummy or loopback). Here is what can this driver do: - Simulate both capture and playback processes - Check the playback stream for containing the looped pattern - Generate random or pattern-based capture data - Inject delays into the playback and capturing processes - Inject errors during the PCM callbacks Also, this driver can check the playback stream for containing the predefined pattern, which is used in the corresponding selftest to check the PCM middle layer data transferring functionality. Additionally, this driver redefines the default RESET ioctl, and the selftest covers this PCM API functionality as well. The driver supports both interleaved and non-interleaved access modes, and have separate pattern buffers for each channel. The driver supports up to 4 channels and up to 8 substreams. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> --- V1 -> V2: - Rename the driver from from 'valsa' to 'pcmtest'. - Implement support for interleaved and non-interleaved access modes - Add support for 8 substreams and 4 channels - Extend supported formats - Extend and rewrite in C the selftest for the driver V2 -> V3: - Add separate pattern buffers for each channel - Speed up the capture data generation when using interleaved access mode - Extend the corresponding selftest to cover the multiple channels capturing and playback functionalities when using interleaved access mode. - Fix documentation issues V3 -> V4: - Fix issue in the selftest: there was a typo in the fscanf argument. Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/pcmtest.rst | 120 ++++++++++++++++++++++++++ 2 files changed, 121 insertions(+) create mode 100644 Documentation/sound/cards/pcmtest.rst diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index c016f8c3b88b..49c1f2f688f8 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -17,3 +17,4 @@ Card-Specific Information hdspm serial-u16550 img-spdif-in + pcmtest diff --git a/Documentation/sound/cards/pcmtest.rst b/Documentation/sound/cards/pcmtest.rst new file mode 100644 index 000000000000..e163522f3205 --- /dev/null +++ b/Documentation/sound/cards/pcmtest.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Virtual PCM Test Driver +=========================== + +The Virtual PCM Test Driver emulates a generic PCM device, and can be used for +testing/fuzzing of the userspace ALSA applications, as well as for testing/fuzzing of +the PCM middle layer. Additionally, it can be used for simulating hard to reproduce +problems with PCM devices. + +What can this driver do? +~~~~~~~~~~~~~~~~~~~~~~~~ + +At this moment the driver can do the following things: + * Simulate both capture and playback processes + * Generate random or pattern-based capturing data + * Inject delays into the playback and capturing processes + * Inject errors during the PCM callbacks + +It supports up to 8 substreams and 4 channels. Also it supports both interleaved and +non-interleaved access modes. + +Also, this driver can check the playback stream for containing the predefined pattern, +which is used in the corresponding selftest (alsa/pcmtest-test.sh) to check the PCM middle +layer data transferring functionality. Additionally, this driver redefines the default +RESET ioctl, and the selftest covers this PCM API functionality as well. + +Configuration +------------- + +The driver has several parameters besides the common ALSA module parameters: + + * fill_mode (bool) - Buffer fill mode (see below) + * inject_delay (int) + * inject_hwpars_err (bool) + * inject_prepare_err (bool) + * inject_trigger_err (bool) + + +Capture Data Generation +----------------------- + +The driver has two modes of data generation: the first (0 in the fill_mode parameter) +means random data generation, the second (1 in the fill_mode) - pattern-based +data generation. Let's look at the second mode. + +First of all, you may want to specify the pattern for data generation. You can do it +by writing the pattern to the debugfs file. There are pattern buffer debugfs entries +for each channel, as well as entries which contain the pattern buffer length. + + * /sys/kernel/debug/pcmtest/fill_pattern[0-3] + * /sys/kernel/debug/pcmtest/fill_pattern[0-3]_len + +To set the pattern for the channel 0 you can execute the following command: + +.. code-block:: bash + + echo -n mycoolpattern > /sys/kernel/debug/pcmtest/fill_pattern0 + +Then, after every capture action performed on the 'pcmtest' device the buffer for the +channel 0 will contain 'mycoolpatternmycoolpatternmycoolpatternmy...'. + +The pattern itself can be up to 4096 bytes long. + +Delay injection +--------------- + +The driver has 'inject_delay' parameter, which has very self-descriptive name and +can be used for time delay/speedup simulations. The parameter has integer type, and +it means the delay added between module's internal timer ticks. + +If the 'inject_delay' value is positive, the buffer will be filled slower, if it is +negative - faster. You can try it yourself by starting a recording in any +audiorecording application (like Audacity) and selecting the 'pcmtest' device as a +source. + +This parameter can be also used for generating a huge amount of sound data in a very +short period of time (with the negative 'inject_delay' value). + +Errors injection +---------------- + +This module can be used for injecting errors into the PCM communication process. This +action can help you to figure out how the userspace ALSA program behaves under unusual +circumstances. + +For example, you can make all 'hw_params' PCM callback calls return EBUSY error by +writing '1' to the 'inject_hwpars_err' module parameter: + +.. code-block:: bash + + echo 1 > /sys/module/snd_pcmtest/parameters/inject_hwpars_err + +Errors can be injected into the following PCM callbacks: + + * hw_params (EBUSY) + * prepare (EINVAL) + * trigger (EINVAL) + +Playback test +------------- + +This driver can be also used for the playback functionality testing - every time you +write the playback data to the 'pcmtest' PCM device and close it, the driver checks the +buffer for containing the looped pattern (which is specified in the fill_pattern +debugfs file for each channel). If the playback buffer content represents the looped +pattern, 'pc_test' debugfs entry is set into '1'. Otherwise, the driver sets it to '0'. + +ioctl redefinition test +----------------------- + +The driver redefines the 'reset' ioctl, which is default for all PCM devices. To test +this functionality, we can trigger the reset ioctl and check the 'ioctl_test' debugfs +entry: + +.. code-block:: bash + + cat /sys/kernel/debug/pcmtest/ioctl_test + +If the ioctl is triggered successfully, this file will contain '1', and '0' otherwise. -- 2.34.1

2 years, 4 months

2
3
0 0

[PATCH v3 0/3] nolibc: add part2 of support for rv32

by Zhangjin Wu

Hi, Willy This is the v3 part2 of support for rv32, differs from the v2 part2 [1], we only fix up compile issues in this patchset. With the v3 generic part1 [2] and this patchset, we can compile nolibc for rv32 now. This is based on the idea of suggestions from Arnd [3], instead of '#error' on the unsupported syscall on a target platform, a 'return -ENOSYS' allow us to compile it at first and then allow we fix up the test failures reported by nolibc-test one by one. The first two patches fix up all of the compile failures with '-ENOSYS' (and '#ifdef' if required): tools/nolibc: fix up #error compile failures with -ENOSYS tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYS The last one enables rv32 compile support: selftests/nolibc: riscv: customize makefile for rv32 The above compile support patch here is only for test currently, as Thomas suggested, for a full rv32 support, it should wait for the left parts. Welcome your feedbacks, will wait for enough discussion on this patchset and then send the left parts one by one to fix up the test failures about waitid, llseek and time64 syscalls: ppoll_time64, clock_gettime64, pselect6_time64. So, I do recommend to apply this patchset, it allows us to send the left parts independently, otherwise, all of them should be sent out for review together. with this patchset, the rv32 users may be able to use nolibc although some syscalls still missing :-) Or at least we apply the first two, so, I can manually cherry-pick the compile support patch to do my local test, and the other platform developer may also benefit from them. I'm cleaning up the left parts, but still require some time, I plan to split them to such parts: * part3: waitid, prepared, will send out later * part4: llseek, prepared, will send out later * part5: time64 syscalls, ppoll_time64 ok, will finish them next week (It is a little hard to split them) Best regards, Zhangjin --- [1]: https://lore.kernel.org/linux-riscv/cover.1685387484.git.falcon@tinylab.org… [2]: https://lore.kernel.org/linux-riscv/cover.1685777982.git.falcon@tinylab.org… [3]: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@ap… Zhangjin Wu (3): tools/nolibc: fix up #error compile failures with -ENOSYS tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYS selftests/nolibc: riscv: customize makefile for rv32 tools/include/nolibc/sys.h | 38 ++++++++++++++++--------- tools/testing/selftests/nolibc/Makefile | 11 +++++-- 2 files changed, 34 insertions(+), 15 deletions(-) -- 2.25.1

2 years, 4 months

3
23
0 0

[PATCH v4 0/3] nolibc: add part2 of support for rv32

by Zhangjin Wu

Hi, Willy This is the v4 part2 of support for rv32 (v3 [1]), it applied the suggestions from Thomas, Arnd [2] and you [3]. now, the rv32 compile support almost aligned with x86 except the extra KARCH to make kernel happy, thanks very much for your nice review! Since the 'override' method mentioned in [4] split the whole Makefile context to two parts, it may make the code not that easy to maintain, so, this patchset goes back to the KARCH (suggested from Willy, before, I used something like _ARCH) passing method, as suggested by Willy, we also aligned the KARCH assignment with the other variables. Changes from v3 -> v4: * No new changes in the first two except a new Reviewed-by line from Arnd * selftests/nolibc: riscv: customize makefile for rv32 Do it like the other architectures, especially like x86. The difference from x86 is, the top-level kernel Makefile doesn't accept riscv32 and riscv64, it only accept riscv, to make kernel happy, a KARCH variable is added for riscv32 and riscv64, and then passed to kernel with ARCH=$(KARCH). Since tools/include/nolibc/Makefile shares arch-riscv.h between riscv32 and riscv64 and there is a headers_standalone target who called kernel headers and headers_install, so, pass ARCH=$(KARCH) to it too. Did compile test for aarch64, rv32 and rv64, include run-user and run. Note, this is required with the default config from the 20230606-nolibc-rv32+stkp7a branch of [5]: diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index ce02bb09651b..72bd8fe0cad6 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -1934,11 +1934,13 @@ void show_rcu_tasks_gp_kthreads(void) } #endif /* #ifndef CONFIG_TINY_RCU */ +#ifdef CONFIG_TASKS_RCU struct task_struct *get_rcu_tasks_gp_kthread(void) { return rcu_tasks.kthread_ptr; } EXPORT_SYMBOL_GPL(get_rcu_tasks_gp_kthread); +#endif #ifdef CONFIG_PROVE_RCU struct rcu_tasks_test_desc { Best regards, Zhangjin --- [1]: https://lore.kernel.org/linux-riscv/cover.1685780412.git.falcon@tinylab.org/ [2]: https://lore.kernel.org/linux-riscv/d1c83340-af4c-4780-a101-b9d22b47379c@ap… [3]: https://lore.kernel.org/lkml/ZIAywHvr6UB1J4of@1wt.eu/ [4]: https://lore.kernel.org/lkml/20230607063314.671429-1-falcon@tinylab.org/ [5]: https://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc.git Zhangjin Wu (3): tools/nolibc: fix up #error compile failures with -ENOSYS tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYS selftests/nolibc: riscv: customize makefile for rv32 tools/include/nolibc/sys.h | 38 ++++++++++++++++--------- tools/testing/selftests/nolibc/Makefile | 20 +++++++++++-- 2 files changed, 42 insertions(+), 16 deletions(-) -- 2.25.1

2 years, 4 months

1
3
0 0

[PATCH 0/8] Remove child from struct ctl_table

by Joel Granados

Resending as the first set got mangled with smtp error. This is part of the effort to remove the empty element of the ctl_table structures (used to calculate size) and replace it with an ARRAY_SIZE call. By replacing the child element in struct ctl_table with a flags element we make sure that there are no forward recursions on child nodes and therefore set ourselves up for just using an ARRAY_SIZE. We also added some self tests to make sure that we do not break anything. Patchset is separated in 4: parport fixes, selftests fixes, selftests additions and replacement of child element. Tested everything with sysctl self tests and everything seems "ok". 1. parport fixes: @mcgrof: this is related to my previous series and it plugs a sysct table leak in the parport driver. Please tell me if you want me to repost the parport series with this one stiched in. 2. Selftests fixes: Remove the prefixed zeros when passing a awk field to the awk print command because it was causing $0009 to be interpreted as $0. Replaced continue with return in sysctl.sh(test_case) so the test actually gets skipped. The skip decision is now in sysctl.sh(skip_test). 3. Selftest additions: New test to confirm that unregister actually removes targets. New test to confirm that permanently empty targets are indeed created and that no other targets can be created "on top". 4. Replaced the child pointer in struct ctl_table with a u8 flag. The flag is used to differentiate between permanently empty targets and non-empty ones. Comments/feedback greatly appreciated Best Joel Joel Granados (8): parport: plug a sysctl register leak test_sysctl: Fix test metadata getters test_sysctl: Group node sysctl test under one func test_sysctl: Add an unregister sysctl test test_sysctl: Add an option to prevent test skip test_sysclt: Test for registering a mount point sysctl: Remove debugging dump_stack sysctl: replace child with a flags var drivers/parport/procfs.c | 23 ++--- fs/proc/proc_sysctl.c | 82 ++++------------ include/linux/sysctl.h | 4 +- lib/test_sysctl.c | 91 ++++++++++++++++-- tools/testing/selftests/sysctl/sysctl.sh | 115 +++++++++++++++++------ 5 files changed, 204 insertions(+), 111 deletions(-) -- 2.30.2

2 years, 4 months

2
10
0 0

[PATCH bpf v3 0/2] Fix BPF verifier bypass on scalar spill

by Maxim Mikityanskiy

From: Maxim Mikityanskiy <maxim(a)isovalent.com> See the details in the commit message (TL/DR: under CAP_BPF, the verifier can be fooled to think that a scalar is zero while in fact it's your predefined number.) v1 and v2 were sent off-list. v2 changes: Added more tests, migrated them to inline asm, started using bpf_get_prandom_u32, switched to a more bulletproof dead branch check and modified the failing spill test scenarios so that an unauthorized access attempt is performed in both branches. v3 changes: Dropped an improvement not necessary for the fix, changed the Fixes tag. Maxim Mikityanskiy (2): bpf: Fix verifier tracking scalars on spill selftests/bpf: Add test cases to assert proper ID tracking on spill kernel/bpf/verifier.c | 7 + .../selftests/bpf/progs/verifier_spill_fill.c | 198 ++++++++++++++++++ 2 files changed, 205 insertions(+) -- 2.40.1

2 years, 4 months

3
6
0 0

[PATCH v1 0/3] selftests/mm: new test for FOLL_LONGTERM on file mappings

by David Hildenbrand

Let's add some selftests to make sure that: * R/O long-term pinning always works of file mappings * R/W long-term pinning always works in MAP_PRIVATE file mappings * R/W long-term pinning only works in MAP_SHARED mappings with special filesystems (shmem, hugetlb) and fails with other filesystems (ext4, btrfs, xfs). The tests make use of the gup_test kernel module to trigger ordinary GUP and GUP-fast, and liburing (similar to our COW selftests). Test with memfd, memfd hugetlb, tmpfile() and mkstemp(). The latter usually gives us a "real" filesystem (ext4, btrfs, xfs) where long-term pinning is expected to fail. Note that these selftests don't contain any actual reproducers for data corruptions in case R/W long-term pinning on problematic filesystems "would" work. Maybe we can later come up with a racy !FOLL_LONGTERM reproducer that can reuse an existing interface to trigger short-term pinning (I'll look into that next). On current mm/mm-unstable: # ./gup_longterm # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB TAP version 13 1..50 # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd ok 1 Should have worked # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with tmpfile ok 2 Should have worked # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile ok 3 Should have failed # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB) ok 4 Should have worked # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB) ok 5 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd ok 6 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile ok 7 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile ok 8 Should have failed # [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB) ok 9 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB) ok 10 Should have worked # [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd ok 11 Should have worked # [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with tmpfile ok 12 Should have worked # [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile ok 13 Should have worked # [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB) ok 14 Should have worked # [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB) ok 15 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd ok 16 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile ok 17 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile ok 18 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB) ok 19 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB) ok 20 Should have worked # [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd ok 21 Should have worked # [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile ok 22 Should have worked # [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile ok 23 Should have worked # [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB) ok 24 Should have worked # [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB) ok 25 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd ok 26 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile ok 27 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile ok 28 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB) ok 29 Should have worked # [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB) ok 30 Should have worked # [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd ok 31 Should have worked # [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile ok 32 Should have worked # [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile ok 33 Should have worked # [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB) ok 34 Should have worked # [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB) ok 35 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd ok 36 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile ok 37 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile ok 38 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB) ok 39 Should have worked # [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB) ok 40 Should have worked # [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd ok 41 Should have worked # [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with tmpfile ok 42 Should have worked # [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with local tmpfile ok 43 Should have failed # [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (2048 kB) ok 44 Should have worked # [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB) ok 45 Should have worked # [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd ok 46 Should have worked # [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with tmpfile ok 47 Should have worked # [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with local tmpfile ok 48 Should have worked # [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB) ok 49 Should have worked # [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB) ok 50 Should have worked # Totals: pass:50 fail:0 xfail:0 xpass:0 skip:0 error:0 Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Lorenzo Stoakes <lstoakes(a)gmail.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Peter Xu <peterx(a)redhat.com> Cc: Jason Gunthorpe <jgg(a)nvidia.com> Cc: John Hubbard <jhubbard(a)nvidia.com> Cc: Jan Kara <jack(a)suse.cz> David Hildenbrand (3): selftests/mm: factor out detection of hugetlb page sizes into vm_util selftests/mm: gup_longterm: new functional test for FOLL_LONGTERM selftests/mm: gup_longterm: add liburing tests tools/testing/selftests/mm/Makefile | 3 + tools/testing/selftests/mm/cow.c | 29 +- tools/testing/selftests/mm/gup_longterm.c | 459 ++++++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 +- tools/testing/selftests/mm/vm_util.c | 27 ++ tools/testing/selftests/mm/vm_util.h | 1 + 6 files changed, 495 insertions(+), 28 deletions(-) create mode 100644 tools/testing/selftests/mm/gup_longterm.c -- 2.40.1

2 years, 4 months

4
12
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror