August 2025 - Linux-kselftest-mirror

[PATCH 0/2] Documentation: ktap: formatting cleanup

by Bagas Sanjaya

Hi, Just a little formatting cleanup for ktap docs (actually only bullet list items fix in [2/2]; the first patch is trivial spelling fix). Enjoy! Bagas Sanjaya (2): Documentation: ktap: Correct "its" spelling Documentation: ktap: Separate first bullet list items Documentation/dev-tools/ktap.rst | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) base-commit: 0bbc2548ea85e6bda835a08c6d47d46435945cda -- An old man doll... just what I always wanted! - Clara

2 weeks, 5 days

3
7
0 0

[PATCH v4 0/5] Better split_huge_page_test result check

by Zi Yan

This patchset uses kpageflags to get after-split folio orders for a better split_huge_page_test result check[1]. The added gather_after_split_folio_orders() scans through a VPN range and collects the numbers of folios at different orders. check_after_split_folio_orders() compares the result of gather_after_split_folio_orders() to a given list of numbers of different orders. This patchset also added new order and in folio offset to the split huge page debugfs's pr_debug()s; Changelog === From V3[4]: 1. Renamed {gather,check}_folio_orders() to {gather,check}_after_split_folio_orders() and moved them to split_huge_page_test.c, since both functions are not general enough for arbitrary folio order checks in any virtual address range. Comments are added to clarify the purpose of these functions. 2. Fixed file descriptor error check. 3. Removed unnecessary statements. 4. Fixed is_backed_by_folio() tail PFN off-by-one check issue. 5. Added a check in is_backed_by_folio() to detect if the order of the backing large folio is larger than the given order. 6. Moved misplaced comments in is_backed_by_folio(). 7. Added a comment and a commit message to clarify why the split range of folio_split() tests is changed. From V2[3]: 1. Added two missing free()s in check_folio_orders(). 2. Reimplemented is_backed_by_thp() to use kpageflags to get precise folio order information and renamed it to is_backed_by_folio() in new Patch 3. 3. Renamed *_file to *_fd in Patch 2. 4. Indentation fixes. 5. Fixed vaddr stepping issue in gather_folio_orders() when a compound tail page is encountered. 6. Used pmd_order in place of max_order in split_huge_page_test.c. 7. Documented gather_folio_orders(). From V1[2]: 1. Dropped split_huge_pages_pid() for loop step change to avoid messing up with PTE-mapped THP handling. split_huge_page_test.c is changed to perform split at [addr, addr + pagesize) range to limit one folio_split() per folio. 2. Moved pr_debug changes in Patch 2 to Patch 1. 3. Moved KPF_* to vm_util.h and used PAGEMAP_PFN instead of local PFN_MASK. 4. Used pagemap_get_pfn() helper. 5. Used char *vaddr and size_t len as inputs to gather_folio_orders() and check_folio_orders() instead of vpn and nr_pages. 6. Removed variable length variables and used malloc instead. [1] https://lore.kernel.org/linux-mm/e2f32bdb-e4a4-447c-867c-31405cbba151@redha… [2] https://lore.kernel.org/linux-mm/20250806022045.342824-1-ziy@nvidia.com/ [3] https://lore.kernel.org/linux-mm/20250808190144.797076-1-ziy@nvidia.com/ [4] https://lore.kernel.org/linux-mm/20250812155512.926011-1-ziy@nvidia.com/ Zi Yan (5): mm/huge_memory: add new_order and offset to split_huge_pages*() pr_debug. selftests/mm: mark all functions static in split_huge_page_test.c selftests/mm: reimplement is_backed_by_thp() with more precise check selftests/mm: add check_after_split_folio_orders() helper. selftests/mm: check after-split folio orders in split_huge_page_test. mm/huge_memory.c | 8 +- .../selftests/mm/split_huge_page_test.c | 345 +++++++++++++++--- tools/testing/selftests/mm/vm_util.c | 13 + tools/testing/selftests/mm/vm_util.h | 4 + 4 files changed, 311 insertions(+), 59 deletions(-) -- 2.50.1

2 weeks, 5 days

5
14
0 0

[PATCH] sud_test.c: Spelling correction 'usigned' changed to 'unsigned'

by Sidharth Seela

Signed-off-by: Sidharth Seela <sidharthseela(a)gmail.com> diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c index 2eb2c06303f2..6b846f5c1fa6 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -140,7 +140,7 @@ TEST(bad_prctl_param) prctl_invalid(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, 1, -1L, &sel, EINVAL); /* - * Allowed range overflows usigned long + * Allowed range overflows unsigned long */ prctl_invalid(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, -1L, 0x1, &sel, EINVAL); -- 2.39.5

2 weeks, 5 days

1
0
0 0

[PATCH 0/6] Kselftests: fix spelling mistakes

by Soham Metha

Used codespell to detect spelling mistakes across multiple tests and fixed various simple typos found. --- found/fixed the following typos: > didnt't -> didn't in `tools/testing/selftests/filesystems/statmount/statmount_test.c` > add add -> add > cannnot -> cannot > fowarded -> forwarded in `tools/testing/selftests/net/netfilter/nft_nat.sh` > faile -> failed in `tools/testing/selftests/ublk/test_common.sh` > indicies -> indices > requrired -> required > guranteed -> guaranteed in `tools/testing/selftests/kvm/riscv/sbi_pmu_test.c` > avaialable -> available in `tools/testing/selftests/kvm/s390/cpumodel_subfuncs_test.c` > requries -> requires in `tools/testing/selftests/safesetid/safesetid-test.c` Soham Metha (6): selftests: filesystems: statmout: fix spelling mistake in output setftests: net: netfilter: fix spelling mistakes in output selftests: ublk: fixed spelling mistake in output selftests: kvm: riscv: fix spelling mistakes in comments selftests: kvm: s390: fixed spelling mistake in output selftests: net: tcp_ao: fix spelling mistake in comments .../filesystems/statmount/statmount_test.c | 2 +- .../testing/selftests/kvm/riscv/sbi_pmu_test.c | 10 +++++----- .../kvm/s390/cpumodel_subfuncs_test.c | 2 +- .../testing/selftests/net/netfilter/nft_nat.sh | 18 +++++++++--------- .../selftests/safesetid/safesetid-test.c | 2 +- tools/testing/selftests/ublk/test_common.sh | 2 +- 6 files changed, 18 insertions(+), 18 deletions(-) -- 2.34.1

2 weeks, 5 days

4
9
0 0

[PATCHv3 iproute2-next] iplink: bond_slave: add support for actor_port_prio

by Hangbin Liu

Add support for the actor_port_prio option for bond slaves. This per-port priority can be used by the bonding driver in ad_select to choose the higher-priority aggregator during failover. Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v3: rename ad_actor_port_prio to actor_port_prio v2: no update --- ip/iplink_bond.c | 1 + ip/iplink_bond_slave.c | 18 ++++++++++++++++-- man/man8/ip-link.8.in | 6 ++++++ 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/ip/iplink_bond.c b/ip/iplink_bond.c index d6960f6d9b03..1a2c1b3042a0 100644 --- a/ip/iplink_bond.c +++ b/ip/iplink_bond.c @@ -91,6 +91,7 @@ static const char *ad_select_tbl[] = { "stable", "bandwidth", "count", + "prio", NULL, }; diff --git a/ip/iplink_bond_slave.c b/ip/iplink_bond_slave.c index ad6875006950..c88100e248dd 100644 --- a/ip/iplink_bond_slave.c +++ b/ip/iplink_bond_slave.c @@ -15,7 +15,9 @@ static void print_explain(FILE *f) { - fprintf(f, "Usage: ... bond_slave [ queue_id ID ] [ prio PRIORITY ]\n"); + fprintf(f, "Usage: ... bond_slave [ queue_id ID ] [ prio PRIORITY ]\n" + " [ actor_port_prio PRIORITY ]\n" + ); } static void explain(void) @@ -145,12 +147,18 @@ static void bond_slave_print_opt(struct link_util *lu, FILE *f, struct rtattr *t state); print_slave_oper_state(f, "ad_partner_oper_port_state_str", state); } + + if (tb[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO]) + print_int(PRINT_ANY, + "actor_port_prio", + "actor_port_prio %d ", + rta_getattr_u16(tb[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO])); } static int bond_slave_parse_opt(struct link_util *lu, int argc, char **argv, struct nlmsghdr *n) { - __u16 queue_id; + __u16 queue_id, actor_port_prio; int prio; while (argc > 0) { @@ -164,6 +172,12 @@ static int bond_slave_parse_opt(struct link_util *lu, int argc, char **argv, if (get_s32(&prio, *argv, 0)) invarg("prio is invalid", *argv); addattr32(n, 1024, IFLA_BOND_SLAVE_PRIO, prio); + } else if (strcmp(*argv, "actor_port_prio") == 0) { + NEXT_ARG(); + if (get_u16(&actor_port_prio, *argv, 0)) + invarg("actor prio is invalid", *argv); + addattr16(n, 1024, IFLA_BOND_SLAVE_ACTOR_PORT_PRIO, + actor_port_prio); } else { if (matches(*argv, "help") != 0) fprintf(stderr, diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in index e3297c577152..7995943ab11f 100644 --- a/man/man8/ip-link.8.in +++ b/man/man8/ip-link.8.in @@ -2846,6 +2846,12 @@ the following additional arguments are supported: (a 32bit signed value). This option only valid for active-backup(1), balance-tlb (5) and balance-alb (6) mode. +.sp +.BI actor_port_prio " PRIORITY" +- set the slave's ad actor port priority for 802.3ad aggregation selection +logic during failover (a 16bit unsigned value). This option only valid for +802.3ad (4) mode. + .in -8 .TP -- 2.50.1

2 weeks, 5 days

1
0
0 0

[Patch v2 0/2] Add kselftest harness selftest with variant

by Wei Yang

We already have a selftest for harness, while there is not usage of FIXTURE_VARIANT. Patch 2 add FIXTURE_VARIANT usage in the selftest. Patch 1 is a typo fix. v2: * drop patch 2 in v1 * adjust patch 2 based on Thomas comment Wei Yang (2): selftests: harness: correct typo of __constructor_order_forward in comment selftests: harness: Add kselftest harness selftest with variant tools/testing/selftests/kselftest_harness.h | 2 +- .../kselftest_harness/harness-selftest.c | 30 +++++++++++++++++++ .../harness-selftest.expected | 20 ++++++++++--- 3 files changed, 47 insertions(+), 5 deletions(-) -- 2.34.1

2 weeks, 5 days

3
7
0 0

[PATCHv2 net-next 0/3] bonding: support aggregator selection based on port priority

by Hangbin Liu

This patchset introduces a new per-port bonding option: `ad_actor_port_prio`. It allows users to configure the actor's port priority, which can then be used by the bonding driver for aggregator selection based on port priority. This provides finer control over LACP aggregator choice, especially in setups with multiple eligible aggregators over 2 switches. v2: a) set default bond option value for port priority (Nikolay Aleksandrov) b) fix __agg_ports_priority coding style (Nikolay Aleksandrov) c) fix shellcheck warns Hangbin Liu (3): bonding: add support for per-port LACP actor priority bonding: support aggregator selection based on port priority selftests: bonding: add test for LACP actor port priority Documentation/networking/bonding.rst | 18 +++- drivers/net/bonding/bond_3ad.c | 29 ++++++ drivers/net/bonding/bond_netlink.c | 16 ++++ drivers/net/bonding/bond_options.c | 37 ++++++++ include/net/bond_3ad.h | 2 + include/net/bond_options.h | 1 + include/uapi/linux/if_link.h | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_lacp_prio.sh | 93 +++++++++++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 24 ----- tools/testing/selftests/net/lib.sh | 24 +++++ 11 files changed, 222 insertions(+), 26 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh -- 2.50.1

2 weeks, 5 days

3
8
0 0

[PATCH bpf-next v10 0/3] libbpf: fix USDT SIB argument handling causing unrecognized register error

by Jiawei Zhao

When using GCC on x86-64 to compile an usdt prog with -O1 or higher optimization, the compiler will generate SIB addressing mode for global array and PC-relative addressing mode for global variable, e.g. "1@-96(%rbp,%rax,8)" and "-1@4+t1(%rip)". The current USDT implementation in libbpf cannot parse these two formats, causing `bpf_program__attach_usdt()` to fail with -ENOENT (unrecognized register). This patch series adds support for SIB addressing mode in USDT probes. The main changes include: - add correct handling logic for SIB-addressed arguments in `parse_usdt_arg`. - add an usdt_o2 test case to cover SIB addressing mode. Testing shows that the SIB probe correctly generates 8@(%rcx,%rax,8) argument spec and passes all validation checks. The modification history of this patch series: Change since v1: - refactor the code to make it more readable - modify the commit message to explain why and how Change since v2: - fix the `scale` uninitialized error Change since v3: - force -O2 optimization for usdt.test.o to generate SIB addressing usdt and pass all test cases. Change since v4: - split the patch into two parts, one for the fix and the other for the test Change since v5: - Only enable optimization for x86 architecture to generate SIB addressing usdt argument spec. Change since v6: - Add an usdt_o2 test case to cover SIB addressing mode. - Reinstate the usdt.c test case. Change since v7: - Refactor modifications to __bpf_usdt_arg_spec to avoid increasing its size, achieving better compatibility - Fix some minor code style issues - Refactor the usdt_o2 test case, removing semaphore and adding GCC attribute to force -O2 optimization Change since v8: - Refactor the usdt_o2 test case, using assembly to force SIB addressing mode. Change since v9: - Only enable the usdt_o2 test case on x86_64 and i386 architectures since the SIB addressing mode is only supported on x86_64 and i386. Jiawei Zhao (3): libbpf: fix USDT SIB argument handling causing unrecognized register error selftests/bpf: Add an usdt_o2 test case in selftests to cover SIB handling logic selftests/bpf: make usdt_o2 reliably generate SIB USDT arg spec tools/lib/bpf/usdt.bpf.h | 54 ++++++++++++- tools/lib/bpf/usdt.c | 61 ++++++++++++-- tools/testing/selftests/bpf/Makefile | 1 + .../selftests/bpf/prog_tests/usdt_o2.c | 79 +++++++++++++++++++ .../selftests/bpf/progs/test_usdt_o2.c | 37 +++++++++ 5 files changed, 225 insertions(+), 7 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/usdt_o2.c create mode 100644 tools/testing/selftests/bpf/progs/test_usdt_o2.c -- 2.43.0

2 weeks, 5 days

3
6
0 0

[Patch v3 0/2] assert rmap behaves as expected

by Wei Yang

As David suggested, currently we don't have a high level test case to verify the behavior of rmap. This patch set introduce the verification on rmap by migration. Patch 1 is a preparation to move ksm related operations into vm_util. Patch 2 is the new test case for rmap. Currently it covers following four scenarios: * anonymous page * shmem page * pagecache page * ksm page v2->v3: * handle ksm error return in worker * rebase on current mm-unstable v1->v2: * do check on file opening in init_global_file_handlers() * factor out ksm_merge() and ksm_unmerge() instead of partial of it * align the return value of helpers: 0 on success, -errno on error * skip instead of assert if numa not available * check ksm sys file before continue * use private anonymous map instead of shared map * check pfn instead of content * retry migrate * fault in region for each process by FORCE_READ() RFC->v1: * open file in function itself instead of pass fd as parameter * fault in the region by accessing it instead of print content Wei Yang (2): selftests/mm: put general ksm operation into vm_util selftests/mm: assert rmap behave as expected MAINTAINERS | 1 + tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 3 + .../selftests/mm/ksm_functional_tests.c | 134 +----- tools/testing/selftests/mm/rmap.c | 433 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 + tools/testing/selftests/mm/vm_util.c | 123 +++++ tools/testing/selftests/mm/vm_util.h | 7 + 8 files changed, 595 insertions(+), 111 deletions(-) create mode 100644 tools/testing/selftests/mm/rmap.c -- 2.34.1

2 weeks, 5 days

2
4
0 0

Re: [PATCH v4 4/7] mm/selftests: Fix split_huge_page_test failure on systems with 64KB page size

by David Hildenbrand

> >>diff --git a/tools/testing/selftests/mm/split_huge_page_test.c b/ > tools/testing/selftests/mm/split_huge_page_test.c > >>index eadbeb820d71..7cbeaebc9d71 100644 > >>--- a/tools/testing/selftests/mm/split_huge_page_test.c > >>+++ b/tools/testing/selftests/mm/split_huge_page_test.c > >>@@ -523,6 +523,9 @@ int main(int argc, char **argv) > >> const char *fs_loc; > >> bool created_tmp; > >> int offset; > >>+ unsigned int max_order; > >>+ unsigned int nr_pages; > >>+ unsigned int tests; > >> > >> ksft_print_header(); > >> > >>@@ -534,35 +537,38 @@ int main(int argc, char **argv) > >> if (argc > 1) > >> optional_xfs_path = argv[1]; > >> > >>- ksft_set_plan(1+8+1+9+9+8*4+2); > >>- > >> pagesize = getpagesize(); > >> pageshift = ffs(pagesize) - 1; > >> pmd_pagesize = read_pmd_pagesize(); > >> if (!pmd_pagesize) > >> ksft_exit_fail_msg("Reading PMD pagesize failed\n"); > >> > >>+ nr_pages = pmd_pagesize / pagesize; > >>+ max_order = sz2ord(pmd_pagesize); > > ^ > > extra space here > > > >>+ tests = 2 + (max_order - 1) + (2 * max_order) + (max_order - > 1) * 4 + 2; > > Is it possible to have some defines here instead plain numbers? > Thanks I assume we should look into using kselftest_harness as a separate effort, so we can avoid this manual test calculation completely. I'm afraid even using defines will not make this significntly more readable. -- Cheers David / dhildenb

2 weeks, 6 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2025