August 2025 - Linux-kselftest-mirror

[PATCH bpf-next 0/3] selftests/bpf: benchmark all symbols for kprobe-multi

by Menglong Dong

Add the benchmark testcase "kprobe-multi-all", which will hook all the kernel functions during the testing. This series is separated out from [1]. Link: https://lore.kernel.org/bpf/20250817024607.296117-1-dongml2@chinatelecom.cn/ [1] Menglong Dong (3): selftests/bpf: move get_ksyms and get_addrs to trace_helpers.c selftests/bpf: skip recursive functions for kprobe_multi selftests/bpf: add benchmark testing for kprobe-multi-all tools/testing/selftests/bpf/bench.c | 4 + .../selftests/bpf/benchs/bench_trigger.c | 54 ++++ .../selftests/bpf/benchs/run_bench_trigger.sh | 4 +- .../bpf/prog_tests/kprobe_multi_test.c | 220 +---------------- .../selftests/bpf/progs/trigger_bench.c | 12 + tools/testing/selftests/bpf/trace_helpers.c | 233 ++++++++++++++++++ tools/testing/selftests/bpf/trace_helpers.h | 3 + 7 files changed, 311 insertions(+), 219 deletions(-) -- 2.50.1

3 months

2
7
0 0

[PATCH v5 0/5] Better split_huge_page_test result check

by Zi Yan

This patchset uses kpageflags to get after-split folio orders for a better split_huge_page_test result check[1]. The added gather_after_split_folio_orders() scans through a VPN range and collects the numbers of folios at different orders. check_after_split_folio_orders() compares the result of gather_after_split_folio_orders() to a given list of numbers of different orders. This patchset also added new order and in folio offset to the split huge page debugfs's pr_debug()s; Changelog === From V4[5]: 1. Rebased on mm-new. 2. Changed is_backed_by_folio() type to bool. 3. Renamed get_pfn_flags() to pageflags_get(). 4. Removed file descriptor checked in is_backed_by_folio(). 5. Renamed get_page_flags() to vaddr_pageflags_get() to clarify its use. From V3[4]: 1. Renamed {gather,check}_folio_orders() to {gather,check}_after_split_folio_orders() and moved them to split_huge_page_test.c, since both functions are not general enough for arbitrary folio order checks in any virtual address range. Comments are added to clarify the purpose of these functions. 2. Fixed file descriptor error check. 3. Removed unnecessary statements. 4. Fixed is_backed_by_folio() tail PFN off-by-one check issue. 5. Added a check in is_backed_by_folio() to detect if the order of the backing large folio is larger than the given order. 6. Moved misplaced comments in is_backed_by_folio(). 7. Added a comment and a commit message to clarify why the split range of folio_split() tests is changed. From V2[3]: 1. Added two missing free()s in check_folio_orders(). 2. Reimplemented is_backed_by_thp() to use kpageflags to get precise folio order information and renamed it to is_backed_by_folio() in new Patch 3. 3. Renamed *_file to *_fd in Patch 2. 4. Indentation fixes. 5. Fixed vaddr stepping issue in gather_folio_orders() when a compound tail page is encountered. 6. Used pmd_order in place of max_order in split_huge_page_test.c. 7. Documented gather_folio_orders(). From V1[2]: 1. Dropped split_huge_pages_pid() for loop step change to avoid messing up with PTE-mapped THP handling. split_huge_page_test.c is changed to perform split at [addr, addr + pagesize) range to limit one folio_split() per folio. 2. Moved pr_debug changes in Patch 2 to Patch 1. 3. Moved KPF_* to vm_util.h and used PAGEMAP_PFN instead of local PFN_MASK. 4. Used pagemap_get_pfn() helper. 5. Used char *vaddr and size_t len as inputs to gather_folio_orders() and check_folio_orders() instead of vpn and nr_pages. 6. Removed variable length variables and used malloc instead. Link: https://lore.kernel.org/linux-mm/e2f32bdb-e4a4-447c-867c-31405cbba151@redha… [1] Link: https://lore.kernel.org/linux-mm/20250806022045.342824-1-ziy@nvidia.com/ [2] Link: https://lore.kernel.org/linux-mm/20250808190144.797076-1-ziy@nvidia.com/ [3] Link: https://lore.kernel.org/linux-mm/20250812155512.926011-1-ziy@nvidia.com/ [4] Link: https://lore.kernel.org/linux-mm/20250815023915.1394655-1-ziy@nvidia.com/ [5] Zi Yan (5): mm/huge_memory: add new_order and offset to split_huge_pages*() pr_debug. selftests/mm: mark all functions static in split_huge_page_test.c selftests/mm: reimplement is_backed_by_thp() with more precise check selftests/mm: add check_after_split_folio_orders() helper. selftests/mm: check after-split folio orders in split_huge_page_test. mm/huge_memory.c | 8 +- .../selftests/mm/split_huge_page_test.c | 342 +++++++++++++++--- tools/testing/selftests/mm/vm_util.c | 13 + tools/testing/selftests/mm/vm_util.h | 4 + 4 files changed, 308 insertions(+), 59 deletions(-) -- 2.50.1

3 months

3
11
0 0

[PATCH bpf-next v11 0/3] libbpf: fix USDT SIB argument handling causing unrecognized register error

by Jiawei Zhao

When using GCC on x86-64 to compile an usdt prog with -O1 or higher optimization, the compiler will generate SIB addressing mode for global array and PC-relative addressing mode for global variable, e.g. "1@-96(%rbp,%rax,8)" and "-1@4+t1(%rip)". The current USDT implementation in libbpf cannot parse these two formats, causing `bpf_program__attach_usdt()` to fail with -ENOENT (unrecognized register). This patch series adds support for SIB addressing mode in USDT probes. The main changes include: - add correct handling logic for SIB-addressed arguments in `parse_usdt_arg`. - add an usdt_o2 test case to cover SIB addressing mode. Testing shows that the SIB probe correctly generates 8@(%rcx,%rax,8) argument spec and passes all validation checks. The modification history of this patch series: Change since v1: - refactor the code to make it more readable - modify the commit message to explain why and how Change since v2: - fix the `scale` uninitialized error Change since v3: - force -O2 optimization for usdt.test.o to generate SIB addressing usdt and pass all test cases. Change since v4: - split the patch into two parts, one for the fix and the other for the test Change since v5: - Only enable optimization for x86 architecture to generate SIB addressing usdt argument spec. Change since v6: - Add an usdt_o2 test case to cover SIB addressing mode. - Reinstate the usdt.c test case. Change since v7: - Refactor modifications to __bpf_usdt_arg_spec to avoid increasing its size, achieving better compatibility - Fix some minor code style issues - Refactor the usdt_o2 test case, removing semaphore and adding GCC attribute to force -O2 optimization Change since v8: - Refactor the usdt_o2 test case, using assembly to force SIB addressing mode. Change since v9: - Only enable the usdt_o2 test case on x86_64 and i386 architectures since the SIB addressing mode is only supported on x86_64 and i386. Change since v10: - Replace `__attribute__((optimize("O2")))` with `#pragma GCC optimize("O1")` to fix the issue where the optimized compilation condition works improperly. - Renamed test case usdt_o2 and relevant files name to usdt_o1 in that O1 level optimization is enough to generate SIB addressing usdt argument spec. Jiawei Zhao (3): libbpf: fix USDT SIB argument handling causing unrecognized register error selftests/bpf: Add an usdt_o1 test case in selftests to cover SIB handling logic selftests/bpf: make usdt_o1 reliably generate SIB USDT arg spec tools/lib/bpf/usdt.bpf.h | 54 +++++++++++- tools/lib/bpf/usdt.c | 61 ++++++++++++-- .../selftests/bpf/prog_tests/usdt_o1.c | 82 +++++++++++++++++++ .../selftests/bpf/progs/test_usdt_o1.c | 37 +++++++++ 4 files changed, 227 insertions(+), 7 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/usdt_o1.c create mode 100644 tools/testing/selftests/bpf/progs/test_usdt_o1.c -- 2.43.0

3 months

2
6
0 0

[PATCH] rseq/selftests: Use weak symbol reference, not definition, to link with glibc

by Sean Christopherson

Add "extern" to the glibc-defined weak rseq symbols to convert the rseq selftest's usage from weak symbol definitions to weak symbol _references_. Effectively re-defining the glibc symbols wreaks havoc when building with -fno-common, e.g. generates segfaults when running multi-threaded programs, as dynamically linked applications end up with multiple versions of the symbols. Building with -fcommon, which until recently has the been the default for GCC and clang, papers over the bug by allowing the linker to resolve the weak/tentative definition to glibc's "real" definition. Note, the symbol itself (or rather its address), not the value of the symbol, is set to 0/NULL for unresolved weak symbol references, as the symbol doesn't exist and thus can't have a value. Check for a NULL rseq size pointer to handle the scenario where the test is statically linked against a libc that doesn't support rseq in any capacity. Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Cc: stable(a)vger.kernel.org Suggested-by: Florian Weimer <fweimer(a)redhat.com> Reported-by: Thomas Gleixner <tglx(a)linutronix.de> Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx Signed-off-by: Sean Christopherson <seanjc(a)google.com> --- tools/testing/selftests/rseq/rseq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 663a9cef1952..dcac5cbe7933 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -40,9 +40,9 @@ * Define weak versions to play nice with binaries that are statically linked * against a libc that doesn't support registering its own rseq. */ -__weak ptrdiff_t __rseq_offset; -__weak unsigned int __rseq_size; -__weak unsigned int __rseq_flags; +extern __weak ptrdiff_t __rseq_offset; +extern __weak unsigned int __rseq_size; +extern __weak unsigned int __rseq_flags; static const ptrdiff_t *libc_rseq_offset_p = &__rseq_offset; static const unsigned int *libc_rseq_size_p = &__rseq_size; @@ -209,7 +209,7 @@ void rseq_init(void) * libc not having registered a restartable sequence. Try to find the * symbols if that's the case. */ - if (!*libc_rseq_size_p) { + if (!libc_rseq_size_p || !*libc_rseq_size_p) { libc_rseq_offset_p = dlsym(RTLD_NEXT, "__rseq_offset"); libc_rseq_size_p = dlsym(RTLD_NEXT, "__rseq_size"); libc_rseq_flags_p = dlsym(RTLD_NEXT, "__rseq_flags"); base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9 -- 2.51.0.rc1.167.g924127e9c0-goog

3 months

3
3
0 0

[PATCH] selftests/powerpc/pmu/tm: fix typos in tm-trap

by Moktar SELLAMI

Fix spelling mistakes: tmp_trap.c:94 te -> the tmp_trap.c:96 tread -> treated reported by: codespell Signed-off-by: Moktar SELLAMI <smokthar925(a)gmail.com> --- tools/testing/selftests/powerpc/tm/tm-trap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/powerpc/tm/tm-trap.c b/tools/testing/selftests/powerpc/tm/tm-trap.c index 97cb74768e30..298bd09c55bb 100644 --- a/tools/testing/selftests/powerpc/tm/tm-trap.c +++ b/tools/testing/selftests/powerpc/tm/tm-trap.c @@ -91,9 +91,9 @@ void trap_signal_handler(int signo, siginfo_t *si, void *uc) * LE endianness does in effect nothing, instruction (2) * is then executed again as 'trap', generating a second * trap event (note that in that case 'trap' is caught - * not in transacional mode). On te other hand, if after + * not in transacional mode). On the other hand, if after * the return from the signal handler the endianness in- - * advertently flipped, instruction (1) is tread as a + * advertently flipped, instruction (1) is treated as a * branch instruction, i.e. b .+8, hence instruction (3) * and (4) are executed (tbegin.; trap;) and we get sim- * ilaly on the trap signal handler, but now in TM mode. -- 2.34.1

3 months

1
0
0 0

[PATCH] selftests/proc: Fix spelling in comments and improve error message

by Sunday Adelodun

This patch corrects minor spelling mistake and adjusts comment style, such as capitalizing the first letter for consistency. In addition, "error: failed to find available memory address for mapping\n" message replaces a not-quite-suitable one:"error: mmap doesn't like you\n". No functional changes are introduced Signed-off-by: Sunday Adelodun <adelodunolaoluwa(a)yahoo.com> --- tools/testing/selftests/proc/fd-001-lookup.c | 4 ++-- tools/testing/selftests/proc/proc-maps-race.c | 22 +++++++++---------- .../selftests/proc/proc-self-map-files-002.c | 2 +- tools/testing/selftests/proc/read.c | 2 +- tools/testing/selftests/proc/setns-dcache.c | 2 +- tools/testing/selftests/proc/setns-sysvipc.c | 2 +- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/tools/testing/selftests/proc/fd-001-lookup.c b/tools/testing/selftests/proc/fd-001-lookup.c index 60d7948e7124..2f5949593ad4 100644 --- a/tools/testing/selftests/proc/fd-001-lookup.c +++ b/tools/testing/selftests/proc/fd-001-lookup.c @@ -60,7 +60,7 @@ static void test_lookup(unsigned int fd) snprintf(buf, sizeof(buf), "/proc/self/fd/%u", fd); test_lookup_pass(buf); - /* leading junk */ + /* Leading junk */ for (c = 1; c <= 255; c++) { if (c == '/') continue; @@ -68,7 +68,7 @@ static void test_lookup(unsigned int fd) test_lookup_fail(buf); } - /* trailing junk */ + /* Trailing junk */ for (c = 1; c <= 255; c++) { if (c == '/') continue; diff --git a/tools/testing/selftests/proc/proc-maps-race.c b/tools/testing/selftests/proc/proc-maps-race.c index 94bba4553130..2e730b70b171 100644 --- a/tools/testing/selftests/proc/proc-maps-race.c +++ b/tools/testing/selftests/proc/proc-maps-race.c @@ -138,10 +138,10 @@ static void copy_last_line(struct page_content *page, char *last_line) { /* Get the last line in the first page */ const char *end = page->data + page->size - 1; - /* skip last newline */ + /* Skip last newline */ const char *pos = end - 1; - /* search previous newline */ + /* Search previous newline */ while (pos[-1] != '\n') pos--; strncpy(last_line, pos, end - pos); @@ -412,7 +412,7 @@ FIXTURE_SETUP(proc_maps_race) self->vma_count = self->page_size / 32 + 1; self->shared_mem_size = sizeof(struct vma_modifier_info) + self->vma_count * sizeof(void *); - /* map shared memory for communication with the child process */ + /* Map shared memory for communication with the child process */ self->mod_info = (struct vma_modifier_info *)mmap(NULL, self->shared_mem_size, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); ASSERT_NE(self->mod_info, MAP_FAILED); @@ -439,7 +439,7 @@ FIXTURE_SETUP(proc_maps_race) mod_info->child_mapped_addr[i] = mmap(NULL, self->page_size * 3, prot, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ASSERT_NE(mod_info->child_mapped_addr[i], MAP_FAILED); - /* change protection in adjacent maps to prevent merging */ + /* Change protection in adjacent maps to prevent merging */ prot ^= PROT_WRITE; } signal_state(mod_info, CHILD_READY); @@ -536,7 +536,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_split) wait_for_state(mod_info, SETUP_READY); - /* re-read the file to avoid using stale data from previous test */ + /* Re-read the file to avoid using stale data from previous test */ ASSERT_TRUE(read_boundary_lines(self, &self->last_line, &self->first_line)); mod_info->vma_modify = split_vma; @@ -600,7 +600,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_split) } while (end_ts.tv_sec - start_ts.tv_sec < self->duration_sec); end_test_loop(self->verbose); - /* Signal the modifyer thread to stop and wait until it exits */ + /* Signal the modifier thread to stop and wait until it exits */ signal_state(mod_info, TEST_DONE); } @@ -615,7 +615,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_resize) wait_for_state(mod_info, SETUP_READY); - /* re-read the file to avoid using stale data from previous test */ + /* Re-read the file to avoid using stale data from previous test */ ASSERT_TRUE(read_boundary_lines(self, &self->last_line, &self->first_line)); mod_info->vma_modify = shrink_vma; @@ -653,7 +653,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_resize) strcmp(new_first_line.text, restored_last_line.text), "Shrink result invalid", self)); } else { - /* The vmas should be consistent with the original/resored state */ + /* The vmas should be consistent with the original/restored state */ ASSERT_FALSE(print_boundaries_on( strcmp(new_last_line.text, restored_last_line.text), "Expand result invalid", self)); @@ -667,7 +667,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_resize) } while (end_ts.tv_sec - start_ts.tv_sec < self->duration_sec); end_test_loop(self->verbose); - /* Signal the modifyer thread to stop and wait until it exits */ + /* Signal the modifier thread to stop and wait until it exits */ signal_state(mod_info, TEST_DONE); } @@ -682,7 +682,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_remap) wait_for_state(mod_info, SETUP_READY); - /* re-read the file to avoid using stale data from previous test */ + /* Re-read the file to avoid using stale data from previous test */ ASSERT_TRUE(read_boundary_lines(self, &self->last_line, &self->first_line)); mod_info->vma_modify = remap_vma; @@ -734,7 +734,7 @@ TEST_F(proc_maps_race, test_maps_tearing_from_remap) } while (end_ts.tv_sec - start_ts.tv_sec < self->duration_sec); end_test_loop(self->verbose); - /* Signal the modifyer thread to stop and wait until it exits */ + /* Signal the modifier thread to stop and wait until it exits */ signal_state(mod_info, TEST_DONE); } diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c index e6aa00a183bc..ac05b0b127cd 100644 --- a/tools/testing/selftests/proc/proc-self-map-files-002.c +++ b/tools/testing/selftests/proc/proc-self-map-files-002.c @@ -67,7 +67,7 @@ int main(void) break; } if (va == va_max) { - fprintf(stderr, "error: mmap doesn't like you\n"); + fprintf(stderr, "error: failed to find available memory address for mapping\n"); return 1; } diff --git a/tools/testing/selftests/proc/read.c b/tools/testing/selftests/proc/read.c index 35ee78dff144..84f6f2e01150 100644 --- a/tools/testing/selftests/proc/read.c +++ b/tools/testing/selftests/proc/read.c @@ -41,7 +41,7 @@ static void f_reg(DIR *d, const char *filename) int fd; ssize_t rv; - /* read from /proc/kmsg can block */ + /* Read from /proc/kmsg can block */ fd = openat(dirfd(d), filename, O_RDONLY|O_NONBLOCK); if (fd == -1) return; diff --git a/tools/testing/selftests/proc/setns-dcache.c b/tools/testing/selftests/proc/setns-dcache.c index 60ab197a73fc..70389832dd22 100644 --- a/tools/testing/selftests/proc/setns-dcache.c +++ b/tools/testing/selftests/proc/setns-dcache.c @@ -50,7 +50,7 @@ int main(void) atexit(f); - /* Check for priviledges and syscall availability straight away. */ + /* Check for privileges and syscall availability straight away. */ if (unshare(CLONE_NEWNET) == -1) { if (errno == ENOSYS || errno == EPERM) { return 4; diff --git a/tools/testing/selftests/proc/setns-sysvipc.c b/tools/testing/selftests/proc/setns-sysvipc.c index 903890c5e587..d03aa4838f0f 100644 --- a/tools/testing/selftests/proc/setns-sysvipc.c +++ b/tools/testing/selftests/proc/setns-sysvipc.c @@ -49,7 +49,7 @@ int main(void) atexit(f); - /* Check for priviledges and syscall availability straight away. */ + /* Check for privileges and syscall availability straight away. */ if (unshare(CLONE_NEWIPC) == -1) { if (errno == ENOSYS || errno == EPERM) { return 4; -- 2.43.0

3 months

1
0
0 0

[PATCH 1/2] drm/xe/tests: Fix some additional gen_params signatures

by David Gow

In 444be9072fca ("kunit: Pass parameterized test context to generate_params()") prototype used for gen_params functions was changed to add a struct kunit parameter. However, a few of these used in xe were not updated. Update these so that the xe_pci tests build and run again. Fixes: 444be9072fca ("kunit: Pass parameterized test context to generate_params()") Signed-off-by: David Gow <davidgow(a)google.com> --- This should fix the issues found with the linux-next merge: https://lore.kernel.org/linux-next/20250818120846.347d64b1@canb.auug.org.au/ The following should reproduce them: ./tools/testing/kunit/kunit.py run --arch x86_64 --kunitconfig drivers/gpu/drm/xe Ideally, these should be squashed into the corresponding commits: let me know if you'd like me to re-send out the whole series with these fixes applied. Cheers, -- David --- drivers/gpu/drm/xe/tests/xe_pci.c | 12 ++++++------ drivers/gpu/drm/xe/tests/xe_pci_test.h | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/xe/tests/xe_pci.c b/drivers/gpu/drm/xe/tests/xe_pci.c index a65705814b9a..f707e0a54295 100644 --- a/drivers/gpu/drm/xe/tests/xe_pci.c +++ b/drivers/gpu/drm/xe/tests/xe_pci.c @@ -44,9 +44,9 @@ KUNIT_ARRAY_PARAM(pci_id, pciidlist, xe_pci_id_kunit_desc); * * Return: pointer to the next parameter or NULL if no more parameters */ -const void *xe_pci_graphics_ip_gen_param(const void *prev, char *desc) +const void *xe_pci_graphics_ip_gen_param(struct kunit *test, const void *prev, char *desc) { - return graphics_ip_gen_params(prev, desc); + return graphics_ip_gen_params(test, prev, desc); } EXPORT_SYMBOL_IF_KUNIT(xe_pci_graphics_ip_gen_param); @@ -61,9 +61,9 @@ EXPORT_SYMBOL_IF_KUNIT(xe_pci_graphics_ip_gen_param); * * Return: pointer to the next parameter or NULL if no more parameters */ -const void *xe_pci_media_ip_gen_param(const void *prev, char *desc) +const void *xe_pci_media_ip_gen_param(struct kunit *test, const void *prev, char *desc) { - return media_ip_gen_params(prev, desc); + return media_ip_gen_params(test, prev, desc); } EXPORT_SYMBOL_IF_KUNIT(xe_pci_media_ip_gen_param); @@ -78,9 +78,9 @@ EXPORT_SYMBOL_IF_KUNIT(xe_pci_media_ip_gen_param); * * Return: pointer to the next parameter or NULL if no more parameters */ -const void *xe_pci_id_gen_param(const void *prev, char *desc) +const void *xe_pci_id_gen_param(struct kunit *test, const void *prev, char *desc) { - const struct pci_device_id *pci = pci_id_gen_params(prev, desc); + const struct pci_device_id *pci = pci_id_gen_params(test, prev, desc); return pci->driver_data ? pci : NULL; } diff --git a/drivers/gpu/drm/xe/tests/xe_pci_test.h b/drivers/gpu/drm/xe/tests/xe_pci_test.h index ce4d2b86b778..690b36e6500c 100644 --- a/drivers/gpu/drm/xe/tests/xe_pci_test.h +++ b/drivers/gpu/drm/xe/tests/xe_pci_test.h @@ -25,9 +25,9 @@ struct xe_pci_fake_data { int xe_pci_fake_device_init(struct xe_device *xe); -const void *xe_pci_graphics_ip_gen_param(const void *prev, char *desc); -const void *xe_pci_media_ip_gen_param(const void *prev, char *desc); -const void *xe_pci_id_gen_param(const void *prev, char *desc); -const void *xe_pci_live_device_gen_param(const void *prev, char *desc); +const void *xe_pci_graphics_ip_gen_param(struct kunit *test, const void *prev, char *desc); +const void *xe_pci_media_ip_gen_param(struct kunit *test, const void *prev, char *desc); +const void *xe_pci_id_gen_param(struct kunit *test, const void *prev, char *desc); +const void *xe_pci_live_device_gen_param(struct kunit *test, const void *prev, char *desc); #endif -- 2.51.0.rc1.167.g924127e9c0-goog

3 months

2
2
0 0

[PATCH] selftests/bpf: fix typo in comment

by Kathara Sasikumar

Correct spelling of 'occurrence' in uretprobe_stack.c comment. This patch fixes a minor typo in the BPF selftest. Signed-off-by: Kathara Sasikumar <katharasasikumar007(a)gmail.com> --- tools/testing/selftests/bpf/progs/uretprobe_stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/progs/uretprobe_stack.c b/tools/testing/selftests/bpf/progs/uretprobe_stack.c index 9fdcf396b8f4..cbc428a80744 100644 --- a/tools/testing/selftests/bpf/progs/uretprobe_stack.c +++ b/tools/testing/selftests/bpf/progs/uretprobe_stack.c @@ -27,7 +27,7 @@ SEC("uprobe//proc/self/exe:target_1") int BPF_UPROBE(uprobe_1) { /* target_1 is recursive wit depth of 2, so we capture two separate - * stack traces, depending on which occurence it is + * stack traces, depending on which occurrence it is */ static bool recur = false; -- 2.47.2

3 months

1
0
0 0

[PATCH] selftests/netfilter: fix typo in comment

by Kathara Sasikumar

Correct spelling of address in conntrack_icmp_related.sh comment. This patch fixes a minor typo in the selftest script for netfilter. Signed-off-by: Kathara Sasikumar <katharasasikumar007(a)gmail.com> --- tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh index c63d840ead61..f63b7f12b36a 100755 --- a/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh +++ b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh @@ -171,7 +171,7 @@ table inet filter { } EOF -# make sure NAT core rewrites adress of icmp error if nat is used according to +# make sure NAT core rewrites address of icmp error if nat is used according to # conntrack nat information (icmp error will be directed at nsrouter1 address, # but it needs to be routed to nsclient1 address). ip netns exec "$nsrouter1" nft -f - <<EOF -- 2.47.2

3 months

1
0
0 0

[PATCH] selftests: harness: Rework is_signed_type() to avoid collision with overflow.h

by Sean Christopherson

Rename is_signed_type() to is_signed_var() to avoid colliding with a macro of the same name defined by linux/overflow.h. Note, overflow.h's version takes a type as the input, whereas the harness's version takes a variable! This fixes warnings (and presumably potential test failures) in tests that utilize the selftests harness and happen to (indirectly) include overflow.h. In file included from tools/include/linux/bits.h:34, from tools/include/linux/bitops.h:14, from tools/include/linux/hashtable.h:13, from include/kvm_util.h:11, from x86/userspace_msr_exit_test.c:11: tools/include/linux/overflow.h:31:9: error: "is_signed_type" redefined [-Werror] 31 | #define is_signed_type(type) (((type)(-1)) < (type)1) | ^~~~~~~~~~~~~~ In file included from include/kvm_test_harness.h:11, from x86/userspace_msr_exit_test.c:9: ../kselftest_harness.h:754:9: note: this is the location of the previous definition 754 | #define is_signed_type(var) (!!(((__typeof__(var))(-1)) < (__typeof__(var))1)) | ^~~~~~~~~~~~~~ Opportunistically use is_signed_type() to implement is_signed_var() so that the relationship and differences are obvious. Fixes: fc92099902fb ("tools headers: Synchronize linux/bits.h with the kernel sources") Cc: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Cc: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sean Christopherson <seanjc(a)google.com> --- This is probably compile-tested only, I don't think any of the KVM selftests utilize the harness's EXPECT macros. tools/testing/selftests/kselftest_harness.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 2925e47db995..f3e7a46345db 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -56,6 +56,7 @@ #include <asm/types.h> #include <ctype.h> #include <errno.h> +#include <linux/overflow.h> #include <linux/unistd.h> #include <poll.h> #include <stdbool.h> @@ -751,7 +752,7 @@ for (; _metadata->trigger; _metadata->trigger = \ __bail(_assert, _metadata)) -#define is_signed_type(var) (!!(((__typeof__(var))(-1)) < (__typeof__(var))1)) +#define is_signed_var(var) is_signed_type(__typeof__(var)) #define __EXPECT(_expected, _expected_str, _seen, _seen_str, _t, _assert) do { \ /* Avoid multiple evaluation of the cases */ \ @@ -759,7 +760,7 @@ __typeof__(_seen) __seen = (_seen); \ if (!(__exp _t __seen)) { \ /* Report with actual signedness to avoid weird output. */ \ - switch (is_signed_type(__exp) * 2 + is_signed_type(__seen)) { \ + switch (is_signed_var(__exp) * 2 + is_signed_var(__seen)) { \ case 0: { \ uintmax_t __exp_print = (uintmax_t)__exp; \ uintmax_t __seen_print = (uintmax_t)__seen; \ base-commit: 78f4e737a53e1163ded2687a922fce138aee73f5 -- 2.50.0.714.g196bf9f422-goog

3 months

4
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2025