Extend the CPU PM flow to control the path: disable from source up to the node before the sink, then re-enable the same range on restore. To avoid latency, control it up to the node before the sink.
Track per-CPU PM restore failures using percpu_pm_failed. Once a CPU hits a restore failure, set the percpu_pm_failed and return NOTIFY_BAD on subsequent notifications to avoid repeating half-completed transitions.
Setting percpu_pm_failed permanently blocks CPU PM on that CPU. Such failures are typically seen during development; disabling PM operations simplifies the implementation, and a warning highlights the issue.
Reviewed-by: James Clark james.clark@linaro.org Tested-by: Jie Gan jie.gan@oss.qualcomm.com Reviewed-by: Yeoreum Yun yeoreum.yun@arm.com Tested-by: James Clark james.clark@linaro.org Signed-off-by: Leo Yan leo.yan@arm.com --- drivers/hwtracing/coresight/coresight-core.c | 90 +++++++++++++++++++++++----- 1 file changed, 75 insertions(+), 15 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index f07f6f28b9162911cdc673a454702f3ac4dc29ad..674fc375ff44e732405563af7be9dc8fae118e41 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -38,6 +38,7 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_sink);
static DEFINE_RAW_SPINLOCK(coresight_dev_lock); static DEFINE_PER_CPU(struct coresight_device *, csdev_source); +static DEFINE_PER_CPU(bool, percpu_pm_failed);
/** * struct coresight_node - elements of a path, from source to sink @@ -1840,7 +1841,7 @@ static void coresight_release_device_list(void) } }
-static struct coresight_device *coresight_cpu_get_active_source(void) +static struct coresight_path *coresight_cpu_get_active_path(void) { struct coresight_device *source; bool is_active = false; @@ -1856,22 +1857,32 @@ static struct coresight_device *coresight_cpu_get_active_source(void)
/* * It is expected to run in atomic context, so it cannot be preempted - * to disable the source. Here returns the active source pointer - * without concern that its state may change. Since the build path has - * taken a reference on the component, the source can be safely used - * by the caller. + * to disable the path. Here returns the active path pointer without + * concern that its state may change. Since the build path has taken + * a reference on the component, the path can be safely used by the + * caller. */ - return is_active ? source : NULL; + return is_active ? source->path : NULL; }
-static int coresight_pm_is_needed(struct coresight_device *csdev) +/* Return: 1 if PM is required, 0 if skip, or a negative error */ +static int coresight_pm_is_needed(struct coresight_path *path) { - if (!csdev) + struct coresight_device *source; + + if (this_cpu_read(percpu_pm_failed)) + return -EIO; + + if (!path) + return 0; + + source = coresight_get_source(path); + if (!source) return 0;
/* pm_save_disable() and pm_restore_enable() must be paired */ - if (coresight_ops(csdev)->pm_save_disable && - coresight_ops(csdev)->pm_restore_enable) + if (coresight_ops(source)->pm_save_disable && + coresight_ops(source)->pm_restore_enable) return 1;
return 0; @@ -1887,22 +1898,71 @@ static void coresight_pm_device_restore(struct coresight_device *csdev) coresight_ops(csdev)->pm_restore_enable(csdev); }
+static int coresight_pm_save(struct coresight_path *path) +{ + struct coresight_device *source = coresight_get_source(path); + struct coresight_node *from, *to; + int ret; + + ret = coresight_pm_device_save(source); + if (ret) + return ret; + + from = coresight_path_first_node(path); + /* Disable up to the node before sink */ + to = list_prev_entry(coresight_path_last_node(path), link); + coresight_disable_path_from_to(path, from, to); + + return 0; +} + +static void coresight_pm_restore(struct coresight_path *path) +{ + struct coresight_device *source = coresight_get_source(path); + struct coresight_node *from, *to; + int ret; + + from = coresight_path_first_node(path); + /* Enable up to the node before sink */ + to = list_prev_entry(coresight_path_last_node(path), link); + ret = coresight_enable_path_from_to(path, coresight_get_mode(source), + from, to); + if (ret) + goto path_failed; + + coresight_pm_device_restore(source); + return; + +path_failed: + pr_err("Failed in coresight PM restore on CPU%d: %d\n", + smp_processor_id(), ret); + + /* + * Once PM fails on a CPU, set percpu_pm_failed and leave it set until + * reboot. This prevents repeated partial transitions during idle + * entry and exit. + */ + this_cpu_write(percpu_pm_failed, true); +} + static int coresight_cpu_pm_notify(struct notifier_block *nb, unsigned long cmd, void *v) { - struct coresight_device *csdev = coresight_cpu_get_active_source(); + struct coresight_path *path = coresight_cpu_get_active_path(); + int ret;
- if (!coresight_pm_is_needed(csdev)) - return NOTIFY_DONE; + ret = coresight_pm_is_needed(path); + if (ret <= 0) + return ret ? NOTIFY_BAD : NOTIFY_DONE;
switch (cmd) { case CPU_PM_ENTER: - if (coresight_pm_device_save(csdev)) + if (coresight_pm_save(path)) return NOTIFY_BAD; break; case CPU_PM_EXIT: case CPU_PM_ENTER_FAILED: - coresight_pm_device_restore(csdev); + coresight_pm_restore(path); break; default: return NOTIFY_DONE;