CoreSight

coresight@lists.linaro.org

2 participants
2791 discussions

[PATCH 0/4] coresight: Do not call smp_processor_id from preemptible contexts

by Suzuki K Poulose

We have a few places where we call smp_processor_id() from preemptible contexts during the perf buffer handling. We do this to figure out the numa node for the allocation in case the event is not CPU bound. Use numa_node_id() instead in such cases to avoid a splat. Suzuki K Poulose (4): coresight: tmc-etr: Do not call smp_processor_id() from preemptible coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible coresight: tmc-etf: Do not call smp_processor_id from preemptible coresight: etb10: Do not call smp_processor_id from preemptible drivers/hwtracing/coresight/coresight-etb10.c | 6 ++---- drivers/hwtracing/coresight/coresight-tmc-etf.c | 6 ++---- drivers/hwtracing/coresight/coresight-tmc-etr.c | 13 ++++--------- 3 files changed, 8 insertions(+), 17 deletions(-) -- 2.7.4

7 years, 1 month

[RFC PATCH 0/1] Timestamp perf samples

by Wojciech Żmuda

From: Wojciech Zmuda <wzmuda(a)n7space.com> Hello, After our discussion in [1] I came up with this proposal solution on how to timestamp perf samples, so we can tell in trace post-processing, how long does it take to execute traced blocks of code. I'll be grateful if you find some time to take a look at it. The patch itself is 37 lines of additions, so it shouldn't consume a lot of your time. I also have some ideas to further improve this patch I'm not quite sure about, so I'd like to ask you for your input. The simplest verification is visibility of the time field in 'perf script' output: root@zynq:~# perf script --ns -F comm,cpu,event,time | head Frame deformatter: Found 4 FSYNCS singlethread-at [001] 4572.697372400: branches:u: singlethread-at [001] 4572.697372404: branches:u: singlethread-at [001] 4572.697372408: branches:u: singlethread-at [001] 4572.697372412: branches:u: singlethread-at [001] 4572.697372416: branches:u: The step above works only if trace has been collected in CPU-wide mode. I have an idea on how to improve this, but I'd like to get some more information first. I elaborated in the last paragraph. Another way to access these values is using the script engine, which I used for validation of sanity of timestamp values. Using python script I checked if timestamps in subsequent samples are monotonically increasing and it seems they are. The only exception are discontinuities in trace. From my understanding, we can't timestamp discontinuities reasonably, since after decoder synchronizes back after trace loss, it needs to wait for another timestamp packet. from __future__ import print_function import os import sys sys.path.append(os.environ['PERF_EXEC_PATH'] + \ '/scripts/python/Perf-Trace-Util/lib/Perf/Trace') from perf_trace_context import * prev_sample = 0 cnt = 0; def process_event(s): global prev_sample global cnt sample = s['sample'] if not prev_sample: prev_sample = sample; cnt = cnt+1 return if sample['time'] < prev_sample['time']: print('Sample %d has higher timestamp than sample %d' % (cnt-1, cnt)) cnt = cnt+1 By subtracting timestamps of two samples, we can approximately tell, how long did it take (in timestamp units) to execute instructions between these two points. Now, (basing on Al's response in [1]) knowing the timestamp generator clock frequency, we can tell how long did it take in proper time units. The frequency is known (we have it in DT) and can be saved to and retrieved from TSGEN register. This is not done at this moment (the register is empty), but the idea is, if it was, it might then be saved in perf.data headers (similarly as TRCIDR are saved now), and later programmatically retrieved to calculate timestamp differences into actual time. I didn't experiment with it yet - I'd like to learn your opinion on it. I've also tried to access the time field with 'perf script -F time' and while it's possible for traces recorded in CPU-wide mode, it's not possible in per-thread mode due to PERF_SAMPLE_TIME not being set in that mode (cs_etm__synth_events()). I tried to analyze that code, but I can't understand relation between this flag and ETM's timeless_decoding property. It looks to me that timeless decoding was equal to per-thread mode, where timestamps were not really utilized, while in CPU-wide mode they were used to inter-queue correlation. Would it be a good direction to have a separate property of TSGEN being on/off and to set PERF_SAMPLE_TIME based on this, rather than on etm->timeless_decoding? I see an obstacle in the cs_etm__is_timeless_decoding() function, that sets etm->timeless_decoding basing on events having this SAMPLE_TIME flag or not - could the criterion here be the tracing mode (CPU-wide/per-thread) instead? Thank you, Wojciech [1] https://lists.linaro.org/pipermail/coresight/2019-May/002577.html Wojciech Zmuda (1): perf cs-etm: Set time value for samples tools/perf/util/cs-etm.c | 36 ++++++++++++++++++++++++++++++++++++ tools/perf/util/cs-etm.h | 1 + 2 files changed, 37 insertions(+) -- 2.11.0

7 years, 1 month

[PATCH V2 0/6] coresight: Fix snapshot mode

by Mathieu Poirier

This is the second revision of a set that fix miscellaneous problems preventing snapshot mode from working properly when CoreSight events are used. It applies cleanly on the coresight next branch[1] and will be posted again when 5.2-rc1 comes out. Best regards, Mathieu [1]. https://git.linaro.org/kernel/coresight.git/ branch next Changes for V2: * Drop requirement to make the perf AUX buffer the same size as the sink buffers. * Re-worked the user space algorithm to find '*head' and '*old". * Fixed typo in changelogs (Leo). Mathieu Poirier (6): coresight: etb10: Properly set AUX buffer head in snapshot mode coresight: tmc-etr: Properly set AUX buffer head in snapshot mode coresight: tmc-etf: Properly set AUX buffer head in snapshot mode coresight: tmc-etf: Fix snapshot mode update function coresight: perf: Don't set the truncated flag in snapshot mode perf tools: Properly set the value of 'old' and 'head' in snapshot mode drivers/hwtracing/coresight/coresight-etb10.c | 21 ++- .../hwtracing/coresight/coresight-tmc-etf.c | 28 ++-- .../hwtracing/coresight/coresight-tmc-etr.c | 19 ++- tools/perf/arch/arm/util/cs-etm.c | 124 +++++++++++++++++- 4 files changed, 165 insertions(+), 27 deletions(-) -- 2.17.1

7 years, 1 month

[RFC PATCH v2 0/2] perf test: Support Arm CoreSight testing

by Leo Yan

This patch set tries to add support Arm CoreSight testing with perf tool. Since the testings might be very diverse according to different requirements, to keep the testing as simple as possible from the start point, I'd like to define the testings to fulfil below duties: - Sanity testing for integration perf tool with CoreSight tracing; - Trace source oriented testing, it needs to test for every source and iterate the paths from the source to its possible sinks; - Test with 'perf script' for branch samples; - Test with 'perf report' for branch samples and synthesized instruction samples. Before started this work, we need a reliable and simple method to help us to analysis every possible path from one specific source to its output sinks. Suzuki has one the patch [1] which creates sysfs in/out nodes in CoreSight device folders, based on this it's convenient to use depth-first search (DFS) to traverse the paths from ETM to its connected sink devices. Patch 0001 introduces shell script, which based on sysfs in/out nodes to find every feasible path from one CPU to one sink, then we can specify the sink in perf record command and use taskset command to bind task to the target CPU. Use this way it can very if the target CPU can generate trace data and output to the specific sink successfully or not, below is the iteration flow in Juno board: Recording trace with path: CPU0 => 20010000.etf Recording trace with path: CPU0 => 20070000.etr Recording trace with path: CPU1 => 20010000.etf Recording trace with path: CPU1 => 20070000.etr Recording trace with path: CPU2 => 20010000.etf Recording trace with path: CPU2 => 20070000.etr Recording trace with path: CPU3 => 20010000.etf Recording trace with path: CPU3 => 20070000.etr Recording trace with path: CPU4 => 20010000.etf Recording trace with path: CPU4 => 20070000.etr Recording trace with path: CPU5 => 20010000.etf Recording trace with path: CPU5 => 20070000.etr Patch 0002 adds two testings for 'perf report', one is the general testing and the second is testing with option '-itrace'. I verified this patch set on Juno board, the code is based on CoreSight next branch, and applied Suzuki's the patch set 'coresight: Support for ACPI bindings' (have applied the total 36 patches) [2]. [1] https://archive.armlinux.org.uk/lurker/message/20190415.160419.bed67191.en.… [2] https://archive.armlinux.org.uk/lurker/message/20190415.160343.cdd208bb.en.… Leo Yan (2): perf test: Introduce script for Arm CoreSight testing perf test: Add 'perf report' testing for Arm CoreSight .../shell/record+script+report_arm_cs_etm.sh | 95 +++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100755 tools/perf/tests/shell/record+script+report_arm_cs_etm.sh -- 2.17.1

7 years, 1 month

[PATCH v3 00/30] coresight: Support for ACPI bindings

by Suzuki K Poulose

This series adds the support for CoreSight devices on ACPI based platforms. The device connections are encoded as _DSD graph property[0], with CoreSight specific extensions to indicate the direction of data flow as described in [1]. Components attached to CPUs are listed as child devices of the corresponding CPU, removing explicit links to the CPU like we do in the DT. The majority of the series cleans up the driver and prepares the subsystem for platform agnostic firwmare probing, naming scheme, searching etc. We introduce platform independent helpers to parse the platform supplied information. Thus we rename the platform handling code from: of_coresight.c => coresight-platform.c The CoreSight driver creates shadow devices that appear on the Coresight bus, in addition to the real devices (e.g, AMBA bus devices). The name of these devices match the real device. This makes the device name a bit cryptic for ACPI platform. So this series also introduces a generic platform agnostic device naming scheme for the shadow Coresight devices. Towards this we also make changes to the way we lookup devices to resolve the connections, as we can't use the names to identify the devices. So, we use the "fwnode_handle" of the real device for the device lookups. Towards that we clean up the drivers to keep track of the "CoreSight" device rather than the "real" device. However, all real operations, like DMA allocation, Power management etc. must be performed on the real device which is the parent of the shadow device. Finally we add the support for parsing the ACPI platform data. The power management support is missing in the ACPI (and this is not specific to CoreSight). The firmware must ensure that the respective power domains are turned on. Applies on Mathieu's coresight/next tree. Tested on a Juno-r0 board with ACPI bindings patch (Patch 31/30) added on top of [2]. You would need to make sure that the debug power domain is turned on before the Linux kernel boots. (e.g, connect the DS-5 to the Juno board while at UEFI). arm32 code is only compile tested. [0] ACPI Device Graphs using _DSD (Not available online yet, approved but awaiting publish and eventually should be linked at). https://uefi.org/sites/default/files/resources/_DSD-implementation-guide-to… [1] https://developer.arm.com/docs/den0067/latest/acpi-for-coresighttm-10-platf… [2] https://github.com/tianocore/edk2-platforms.git Changes since v2: - Fix the symlink name for ETM devices under cs_etm PMU (Patch by Mathieu) - Drop patches merged already in the tree. - Add the tags from Mathieu - More documentation with examples of ACPI graph in ACPI bindings support. - Fix ETM4 error return path (Mathieu) - Drop the patches exposing device links via sysfs, to be posted as separate series. - Drop the generic helper for device search by fwnode for a better cleanup later. - Split the ACPI bindings support patch for AMBA and platform devices. - Return integer error for <platform>_get_platform_data() helpers. - Fix comment about the return code for acpi_get_coresight_cpu(). - Ensure we don't have devices part of multiple graphs (Mathieu). Changes since v1: [ http://lists.infradead.org/pipermail/linux-arm-kernel/2019-March/639963.html ] - Dropped the replicator driver merge changes as they were pulled already. - Cleanups for Power management in the drivers. - Reuse platform description for connection information. Also introduce routines to clean up the platform description to make sure we drop the references (fwnode_handle). - Add RFC patches for exposing the device-links via sysfs. - Drop tracking the device in favour of coresight_device. - Name etb10 as "etb" - Fix other comments in v1. - Use a generic helper for searching with fwnode_handle rather than adding one for CoreSight. Mathieu Poirier (1): coresight: Use coresight device names for sinks in PMU attribute Suzuki K Poulose (29): coresight: funnel: Clean up device book keeping coresight: replicator: Cleanup device tracking coresight: tmc: Clean up device specific data coresight: catu: Cleanup device specific data coresight: tpiu: Clean up device specific data coresight: stm: Cleanup device specific data coresight: etm: Clean up device specific data coresight: etb10: Clean up device specific data coresight: Rename of_coresight to coresight-platform coresight: etm3x: Rearrange cp14 access detection coresight: stm: Rearrange probing the stimulus area coresight: tmc-etr: Rearrange probing default buffer size coresight: platform: Make memory allocation helper generic coresight: Make sure device uses DT for obsolete compatible check coresight: Introduce generic platform data helper coresight: Make device to CPU mapping generic coresight: Remove cpu field from platform data coresight: Remove name from platform description coresight: Cleanup coresight_remove_conns coresight: Reuse platform data structure for connection tracking coresight: Rearrange platform data probing coresight: Add support for releasing platform specific data coresight: platform: Use fwnode handle for device search coresight: Use fwnode handle instead of device names coresight: Use platform agnostic names coresight: stm: ACPI support for parsing stimulus base coresight: Support for ACPI bindings coresight: acpi: Support for AMBA components coresight: acpi: Support for platform devices drivers/acpi/acpi_amba.c | 9 + drivers/hwtracing/coresight/Makefile | 3 +- drivers/hwtracing/coresight/coresight-catu.c | 40 +- drivers/hwtracing/coresight/coresight-catu.h | 1 - drivers/hwtracing/coresight/coresight-cpu-debug.c | 3 +- drivers/hwtracing/coresight/coresight-etb10.c | 51 +- drivers/hwtracing/coresight/coresight-etm-perf.c | 8 +- drivers/hwtracing/coresight/coresight-etm.h | 6 +- .../hwtracing/coresight/coresight-etm3x-sysfs.c | 12 +- drivers/hwtracing/coresight/coresight-etm3x.c | 45 +- drivers/hwtracing/coresight/coresight-etm4x.c | 37 +- drivers/hwtracing/coresight/coresight-etm4x.h | 2 - drivers/hwtracing/coresight/coresight-funnel.c | 35 +- drivers/hwtracing/coresight/coresight-platform.c | 810 +++++++++++++++++++++ drivers/hwtracing/coresight/coresight-priv.h | 4 + drivers/hwtracing/coresight/coresight-replicator.c | 42 +- drivers/hwtracing/coresight/coresight-stm.c | 118 ++- drivers/hwtracing/coresight/coresight-tmc-etf.c | 9 +- drivers/hwtracing/coresight/coresight-tmc-etr.c | 44 +- drivers/hwtracing/coresight/coresight-tmc.c | 96 +-- drivers/hwtracing/coresight/coresight-tmc.h | 2 - drivers/hwtracing/coresight/coresight-tpiu.c | 24 +- drivers/hwtracing/coresight/coresight.c | 164 ++++- drivers/hwtracing/coresight/of_coresight.c | 297 -------- include/linux/coresight.h | 61 +- 25 files changed, 1332 insertions(+), 591 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-platform.c delete mode 100644 drivers/hwtracing/coresight/of_coresight.c ACPI bindings for Juno-r0 (applies on [2] above) Suzuki K Poulose (1): edk2-platform: juno: Update ACPI CoreSight Bindings Platform/ARM/JunoPkg/AcpiTables/Dsdt.asl | 241 +++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) -- 2.7.4

7 years, 1 month

[PATCH 0/5] coresight: Fix snapshot mode

by Mathieu Poirier

This set fix miscellaneous problems that prevented perf's snapshot mode from working properly when CoreSight events are used. Given the late state in the cycle, it is sent out for reviewing purposes and is not intended for the coming merge window. Applies cleanly to coresight next[1]. Regards, Mathieu [1]. https://git.linaro.org/kernel/coresight.git/log/?h=next Mathieu Poirier (5): coresight: Fix buffer size in snapshot mode coresight: tmc-etf: Fix snapshot mode update function coresight: perf: Don't set the truncated flag in snapshot mode perf tools: Properly set the value of 'old' in snapshot mode docs: coresight: Document snapshot mode Documentation/trace/coresight.txt | 41 ++++++++++++++++++- drivers/hwtracing/coresight/coresight-etb10.c | 31 +++++++++++++- .../hwtracing/coresight/coresight-tmc-etf.c | 34 +++++++++++++-- .../hwtracing/coresight/coresight-tmc-etr.c | 16 ++++++-- tools/perf/arch/arm/util/cs-etm.c | 12 +++++- 5 files changed, 124 insertions(+), 10 deletions(-) -- 2.17.1

7 years, 1 month

[PATCH 1/2] coresight: Do not call smp_processor_id() from preemptible

by Suzuki K Poulose

Instead of using smp_processor_id() to figure out the node, use the numa_node_id() for the current CPU node to avoid splats like : BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743 caller is alloc_etr_buf.isra.6+0x80/0xa0 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 Call trace: dump_backtrace+0x0/0x150 show_stack+0x14/0x20 dump_stack+0x9c/0xc4 debug_smp_processor_id+0x10c/0x110 alloc_etr_buf.isra.6+0x80/0xa0 tmc_alloc_etr_buffer+0x12c/0x1f0 etm_setup_aux+0x1c4/0x230 rb_alloc_aux+0x1b8/0x2b8 perf_mmap+0x35c/0x478 mmap_region+0x34c/0x4f0 do_mmap+0x2d8/0x418 vm_mmap_pgoff+0xd0/0xf8 ksys_mmap_pgoff+0x88/0xf8 __arm64_sys_mmap+0x28/0x38 el0_svc_handler+0xd8/0x138 el0_svc+0x8/0xc Fixes: 855ab61c16bf70b646 ("coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()") Cc: Mathieu Poirier <mathieu.poirier(a)linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- drivers/hwtracing/coresight/coresight-tmc-etr.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 793639f..74578bd 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1323,13 +1323,11 @@ static struct etr_perf_buffer * tmc_etr_setup_perf_buf(struct tmc_drvdata *drvdata, struct perf_event *event, int nr_pages, void **pages, bool snapshot) { - int node, cpu = event->cpu; + int node; struct etr_buf *etr_buf; struct etr_perf_buffer *etr_perf; - if (cpu == -1) - cpu = smp_processor_id(); - node = cpu_to_node(cpu); + node = (event->cpu == -1)? numa_node_id() : cpu_to_node(event->cpu); etr_perf = kzalloc_node(sizeof(*etr_perf), GFP_KERNEL, node); if (!etr_perf) -- 2.7.4

7 years, 1 month

[RFC] Trace-based execution time profiling (timestamp in perf-script?)

by Wojciech Żmuda

Hello, I'm trying to design a solution to use CoreSight for measuring application execution time, with granularity of specific ranges of instructions. I have some idea how this may be achieved and I'd like to know your opinion. Great inspiration comes from this patch set by Leo Yan, especially from the disassembly script: https://lists.linaro.org/pipermail/coresight/2018-May/001325.html Analyzing this, I learned that perf-script is capable of understanding perf.data AUXTRACE section and parsing some of the trace elements to branch samples, which illustrate how the IP moved around. These pieces of information are available for the built-in python interpreter, so we can script it to get assembly from the program image. If I understand perf-script in its current shape correctly, it ignores all the non-branching events (so everything that's not an ATOM, EXCEPTION or TRACE_ON packet) - specifically, timestamping is lost during the process. I'd like to modify perf-script to generate samples on such timing events, so later I can have them in between assembly instructions to calculate deltas and be able to tell either: - how much time and/or CPU cycles have been spent between two arbitrary instructions (ideally), or - what instructions have been executed between timestamp T and T+1 (this seems to be more in-line with how timestamping in CS works, I think) Brief analysis of tools/perf/util.cs-etm.c and cs-etm-decoder/cs-etm-decoder.c suggests that timestamp events are not turned into packets, but merely recorded as a packet queue parameter (I'm not sure why this is needed, though). The cycacc event is not processed further at all, beside being later decoded to plaintext by OpenCSD. I think it may be worth to give them both a dedicated `enum cs_etm_sample_type` value and packet generator functions. Then, I think, it should be possible to generate samples (not sure what type though, perhaps not 'branch' this time) for timestamp/cycacc packets, analogically to what has been done for TRACE_ON https://lists.linaro.org/pipermail/coresight/2018-May/001327.html and then expose it in the python interface. I'd be grateful for any opinion about this idea, especially about usefulness of such feature for the general audience, as well as any possible compatibility issues. If you are aware of another approach to achieve timestamp correlation with branch samples, it would also be very welcome. I hope the idea is not completely pointless. I'm still making my way through the perf subsystem, so I might have missed some crucial details. Thank you for your time, Wojciech

7 years, 1 month

[PATCH v2 00/36] coresight: Support for ACPI bindings

by Suzuki K Poulose

This series adds the support for CoreSight devices on ACPI based platforms. The device connections are encoded as _DSD graph property[0], with CoreSight specific extensions to indicate the direction of data flow as described in [1]. Components attached to CPUs are listed as child devices of the corresponding CPU, removing explicit links to the CPU like we do in the DT. The majority of the series cleans up the driver and prepares the subsystem for platform agnostic firwmare probing, naming scheme, searching etc. We introduce platform independent helpers to parse the platform supplied information. Thus we rename the platform handling code from: of_coresight.c => coresight-platform.c The CoreSight driver creates shadow devices that appear on the Coresight bus, in addition to the real devices (e.g, AMBA bus devices). The name of these devices match the real device. This makes the device name a bit cryptic for ACPI platform. So this series also introduces a generic platform agnostic device naming scheme for the shadow Coresight devices. Towards this we also make changes to the way we lookup devices to resolve the connections, as we can't use the names to identify the devices. So, we use the "fwnode_handle" of the real device for the device lookups. Towards that we clean up the drivers to keep track of the "CoreSight" device rather than the "real" device. However, all real operations, like DMA allocation, Power management etc. must be performed on the real device which is the parent of the shadow device. Finally we add the support for parsing the ACPI platform data. The power management support is missing in the ACPI (and this is not specific to CoreSight). The firmware must ensure that the respective power domains are turned on. The last 3 patches in the series also exposes the device connections via sysfs by symlinks to indicate the trace data paths. Patches 01 - 05 : General cleanups and a fix. Patches 06 - 13 : Cleanup the drivers for tracking the CoreSight device instead of the parent device. Patches 14 - 20 : Introduce platform agnostic APIs for firmware data probing. Patches 21 - 26 : Prepare for reusing and freeing up the platform data description for device connections and references. Patches 27 - 30 : Use fwnode handles and introduce generic naming scheme. Patches 31 - 33 : Introduce ACPI bindings support Patches 34 - 36 : RFC - expose device connections via sysfs Applies on Mathieu's coresight/next tree. Tested on a Juno-r0 board with ACPI bindings patch (Patch 37/36) added on top of [2]. You would need to make sure that the debug power domain is turned on before the Linux kernel boots. (e.g, connect the DS-5 to the Juno board while at UEFI). arm32 code is only compile tested. [0] ACPI Device Graphs using _DSD (Not available online yet, approved but awaiting publish and eventually should be linked at). https://uefi.org/sites/default/files/resources/_DSD-implementation-guide-to… [1] https://developer.arm.com/docs/den0067/latest/acpi-for-coresighttm-10-platf… [2] https://github.com/tianocore/edk2-platforms.git Changes since v1: [ http://lists.infradead.org/pipermail/linux-arm-kernel/2019-March/639963.html ] - Dropped the replicator driver merge changes as they were pulled already. - Cleanups for Power management in the drivers. - Reuse platform description for connection information. Also introduce routines to clean up the platform description to make sure we drop the references (fwnode_handle). - Add RFC patches for exposing the device-links via sysfs. - Drop tracking the device in favour of coresight_device. - Name etb10 as "etb" - Fix other comments in v1. - Use a generic helper for searching with fwnode_handle rather than adding one for CoreSight. Suzuki K Poulose (36): coresight: Fix freeing up the coresight connections coresight: etb10: Cleanup power management coresight: tpiu: Cleanup power management coresight: catu: Cleanup power management coresight: tmc: Cleanup power management coresight: funnel: Clean up device book keeping coresight: replicator: Cleanup device tracking coresight: tmc: Clean up device specific data coresight: catu: Cleanup device specific data coresight: tpiu: Clean up device specific data coresight: stm: Cleanup device specific data coresight: etm: Clean up device specific data coresight: etb10: Clean up device specific data coresight: Rename of_coresight to coresight-platform coresight: etm3x: Rearrange cp14 access detection coresight: stm: Rearrange probing the stimulus area coresight: tmc-etr: Rearrange probing default buffer size coresight: platform: Make memory allocation helper generic coresight: Introduce generic platform data helper coresight: Make device to CPU mapping generic coresight: Remove cpu field from platform data coresight: Remove name from platform description coresight: Cleanup coresight_remove_conns coresight: Reuse platform data structure for connection tracking coresight: Rearrange platform data probing coresight: Add support for releasing platform specific data drivers: Add a generic helper to match device by fwnode handle coresight: platform: Use fwnode handle for device search coresight: Use fwnode handle instead of device names coresight: Use platform agnostic names coresight: stm: ACPI support for parsing stimulus base coresight: Support for ACPI bindings coresight: acpi: Support for components [RFC] coresight: Pass coresight_device for coresight_release_platform_data [RFC] coresight: add return value for fixup connections [RFC] coresight: Expose device connections via sysfs drivers/acpi/acpi_amba.c | 9 + drivers/base/devcon.c | 5 - drivers/base/property.c | 6 + drivers/hwtracing/coresight/Makefile | 3 +- drivers/hwtracing/coresight/coresight-catu.c | 43 +- drivers/hwtracing/coresight/coresight-catu.h | 1 - drivers/hwtracing/coresight/coresight-cpu-debug.c | 3 +- drivers/hwtracing/coresight/coresight-etb10.c | 65 +- drivers/hwtracing/coresight/coresight-etm.h | 6 +- .../hwtracing/coresight/coresight-etm3x-sysfs.c | 12 +- drivers/hwtracing/coresight/coresight-etm3x.c | 45 +- drivers/hwtracing/coresight/coresight-etm4x.c | 36 +- drivers/hwtracing/coresight/coresight-etm4x.h | 2 - drivers/hwtracing/coresight/coresight-funnel.c | 27 +- drivers/hwtracing/coresight/coresight-platform.c | 740 +++++++++++++++++++++ drivers/hwtracing/coresight/coresight-priv.h | 3 + drivers/hwtracing/coresight/coresight-replicator.c | 37 +- drivers/hwtracing/coresight/coresight-stm.c | 110 ++- drivers/hwtracing/coresight/coresight-tmc-etf.c | 9 +- drivers/hwtracing/coresight/coresight-tmc-etr.c | 44 +- drivers/hwtracing/coresight/coresight-tmc.c | 100 +-- drivers/hwtracing/coresight/coresight-tmc.h | 1 - drivers/hwtracing/coresight/coresight-tpiu.c | 30 +- drivers/hwtracing/coresight/coresight.c | 291 ++++++-- drivers/hwtracing/coresight/of_coresight.c | 297 --------- include/linux/coresight.h | 65 +- include/linux/property.h | 1 + 27 files changed, 1378 insertions(+), 613 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-platform.c delete mode 100644 drivers/hwtracing/coresight/of_coresight.c ACPI bindings for Juno-r0 (applies on [2] above) Suzuki K Poulose (1): edk2-platform: juno: Update ACPI CoreSight Bindings Platform/ARM/JunoPkg/AcpiTables/Dsdt.asl | 241 +++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) -- 2.7.4

7 years, 2 months

Re: [PATCH 0/5] coresight: Fix snapshot mode

by Wojciech Żmuda

Hello Mathieu, Does this patch set have impact on other modes as well? I’m thinking --switch-output – it works kind of similar to --snapshot, i.e. may write into perf.data on SIGUSR2 (or on other triggers). What was the high-level reason for these changes? I can see that you adjust perf ring buffer to match sink hardware buffer. Does this mismatch cause some visible trace loss? Thanks, Wojciech

7 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight