- Linux-stable-mirror - lists.linaro.org

[PATCH] batman-adv: batman-adv: handle tvlv unicast send errors

by Wentao Liang

In batadv_tvlv_unicast_send(), the return value of batadv_send_skb_to_orig() is ignored. This could silently drop send failures, making it difficult to detect connectivity issues. Add error checking for batadv_send_skb_to_orig() and log failures via batadv_dbg() to improve error visibility. Fixes: 1ad5bcb2a032 ("batman-adv: Consume skb in batadv_send_skb_to_orig") Cc: stable(a)vger.kernel.org # 4.10+ Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- net/batman-adv/tvlv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/tvlv.c b/net/batman-adv/tvlv.c index 2a583215d439..f081136cc5b7 100644 --- a/net/batman-adv/tvlv.c +++ b/net/batman-adv/tvlv.c @@ -625,6 +625,7 @@ void batadv_tvlv_unicast_send(struct batadv_priv *bat_priv, const u8 *src, unsigned char *tvlv_buff; unsigned int tvlv_len; ssize_t hdr_len = sizeof(*unicast_tvlv_packet); + int r; orig_node = batadv_orig_hash_find(bat_priv, dst); if (!orig_node) @@ -657,7 +658,10 @@ void batadv_tvlv_unicast_send(struct batadv_priv *bat_priv, const u8 *src, tvlv_buff += sizeof(*tvlv_hdr); memcpy(tvlv_buff, tvlv_value, tvlv_value_len); - batadv_send_skb_to_orig(skb, orig_node, NULL); + r = batadv_send_skb_to_orig(skb, orig_node, NULL); + if (r != NET_XMIT_SUCCESS) + batadv_dbg(BATADV_DBG_TP_METER, bat_priv, + "Fail to send the ack."); out: batadv_orig_node_put(orig_node); } -- 2.42.0.windows.2

3 months

2
1
0 0

[PATCH] drm/i915/gvt: fix unterminated-string-initialization warning

by Jani Nikula

Initializing const char opregion_signature[16] = OPREGION_SIGNATURE (which is "IntelGraphicsMem") drops the NUL termination of the string. This is intentional, but the compiler doesn't know this. Switch to initializing header->signature directly from the string litaral, with sizeof destination rather than source. We don't treat the signature as a string other than for initialization; it's really just a blob of binary data. Add a static assert for good measure to cross-check the sizes. Reported-by: Kees Cook <kees(a)kernel.org> Closes: https://lore.kernel.org/r/20250310222355.work.417-kees@kernel.org Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13934 Tested-by: Nicolas Chauvet <kwizart(a)gmail.com> Tested-by: Damian Tometzki <damian(a)riscv-rocks.de> Cc: stable(a)vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> --- drivers/gpu/drm/i915/gvt/opregion.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/opregion.c b/drivers/gpu/drm/i915/gvt/opregion.c index 509f9ccae3a9..dbad4d853d3a 100644 --- a/drivers/gpu/drm/i915/gvt/opregion.c +++ b/drivers/gpu/drm/i915/gvt/opregion.c @@ -222,7 +222,6 @@ int intel_vgpu_init_opregion(struct intel_vgpu *vgpu) u8 *buf; struct opregion_header *header; struct vbt v; - const char opregion_signature[16] = OPREGION_SIGNATURE; gvt_dbg_core("init vgpu%d opregion\n", vgpu->id); vgpu_opregion(vgpu)->va = (void *)__get_free_pages(GFP_KERNEL | @@ -236,8 +235,10 @@ int intel_vgpu_init_opregion(struct intel_vgpu *vgpu) /* emulated opregion with VBT mailbox only */ buf = (u8 *)vgpu_opregion(vgpu)->va; header = (struct opregion_header *)buf; - memcpy(header->signature, opregion_signature, - sizeof(opregion_signature)); + + static_assert(sizeof(header->signature) == sizeof(OPREGION_SIGNATURE) - 1); + memcpy(header->signature, OPREGION_SIGNATURE, sizeof(header->signature)); + header->size = 0x8; header->opregion_ver = 0x02000000; header->mboxes = MBOX_VBT; -- 2.39.5

3 months

2
2
0 0

[PATCH] drm/imagination: fix firmware memory leaks

by Brendan King via B4 Relay

From: Brendan King <Brendan.King(a)imgtec.com> Free the memory used to hold the results of firmware image processing when the module is unloaded. Fix the related issue of the same memory being leaked if processing of the firmware image fails during module load. Ensure all firmware GEM objects are destroyed if firmware image processing fails. Fixes memory leaks on powervr module unload detected by Kmemleak: unreferenced object 0xffff000042e20000 (size 94208): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..<[...EE. d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H. backtrace (crc dd329dec): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xaa4/0x1f50 [powervr] unreferenced object 0xffff000042d20000 (size 20480): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................ 00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................ backtrace (crc 395b02e3): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xb0c/0x1f50 [powervr] Cc: stable(a)vger.kernel.org Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support") Signed-off-by: Brendan King <brendan.king(a)imgtec.com> --- drivers/gpu/drm/imagination/pvr_fw.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_fw.c b/drivers/gpu/drm/imagination/pvr_fw.c index 3debc9870a82ae7de9b2dc173df84c466c137bb3..d09c4c68411627714c14dee5ed4e61b07baca1ba 100644 --- a/drivers/gpu/drm/imagination/pvr_fw.c +++ b/drivers/gpu/drm/imagination/pvr_fw.c @@ -732,7 +732,7 @@ pvr_fw_process(struct pvr_device *pvr_dev) fw_mem->core_data, fw_mem->core_code_alloc_size); if (err) - goto err_free_fw_core_data_obj; + goto err_free_kdata; memcpy(fw_code_ptr, fw_mem->code, fw_mem->code_alloc_size); memcpy(fw_data_ptr, fw_mem->data, fw_mem->data_alloc_size); @@ -742,10 +742,14 @@ pvr_fw_process(struct pvr_device *pvr_dev) memcpy(fw_core_data_ptr, fw_mem->core_data, fw_mem->core_data_alloc_size); /* We're finished with the firmware section memory on the CPU, unmap. */ - if (fw_core_data_ptr) + if (fw_core_data_ptr) { pvr_fw_object_vunmap(fw_mem->core_data_obj); - if (fw_core_code_ptr) + fw_core_data_ptr = NULL; + } + if (fw_core_code_ptr) { pvr_fw_object_vunmap(fw_mem->core_code_obj); + fw_core_code_ptr = NULL; + } pvr_fw_object_vunmap(fw_mem->data_obj); fw_data_ptr = NULL; pvr_fw_object_vunmap(fw_mem->code_obj); @@ -753,7 +757,7 @@ pvr_fw_process(struct pvr_device *pvr_dev) err = pvr_fw_create_fwif_connection_ctl(pvr_dev); if (err) - goto err_free_fw_core_data_obj; + goto err_free_kdata; return 0; @@ -763,13 +767,16 @@ pvr_fw_process(struct pvr_device *pvr_dev) kfree(fw_mem->data); kfree(fw_mem->code); -err_free_fw_core_data_obj: if (fw_core_data_ptr) - pvr_fw_object_unmap_and_destroy(fw_mem->core_data_obj); + pvr_fw_object_vunmap(fw_mem->core_data_obj); + if (fw_mem->core_data_obj) + pvr_fw_object_destroy(fw_mem->core_data_obj); err_free_fw_core_code_obj: if (fw_core_code_ptr) - pvr_fw_object_unmap_and_destroy(fw_mem->core_code_obj); + pvr_fw_object_vunmap(fw_mem->core_code_obj); + if (fw_mem->core_code_obj) + pvr_fw_object_destroy(fw_mem->core_code_obj); err_free_fw_data_obj: if (fw_data_ptr) @@ -836,6 +843,12 @@ pvr_fw_cleanup(struct pvr_device *pvr_dev) struct pvr_fw_mem *fw_mem = &pvr_dev->fw_dev.mem; pvr_fw_fini_fwif_connection_ctl(pvr_dev); + + kfree(fw_mem->core_data); + kfree(fw_mem->core_code); + kfree(fw_mem->data); + kfree(fw_mem->code); + if (fw_mem->core_code_obj) pvr_fw_object_destroy(fw_mem->core_code_obj); if (fw_mem->core_data_obj) --- base-commit: 96c85e428ebaeacd2c640eba075479ab92072ccd change-id: 20250318-ddkopsrc-1339-firmware-related-memory-leak-on-module-unload-c18a9a4fd0db Best regards, -- Brendan King <Brendan.King(a)imgtec.com>

3 months

3
2
0 0

[PATCH] drm/imagination: take paired job reference

by Brendan King via B4 Relay

From: Brendan King <Brendan.King(a)imgtec.com> For paired jobs, have the fragment job take a reference on the geometry job, so that the geometry job cannot be freed until the fragment job has finished with it. The geometry job structure is accessed when the fragment job is being prepared by the GPU scheduler. Taking the reference prevents the geometry job being freed until the fragment job no longer requires it. Fixes a use after free bug detected by KASAN: [ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr] [ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63 Cc: stable(a)vger.kernel.org Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling") Signed-off-by: Brendan King <brendan.king(a)imgtec.com> --- drivers/gpu/drm/imagination/pvr_job.c | 7 +++++++ drivers/gpu/drm/imagination/pvr_queue.c | 4 ++++ 2 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/imagination/pvr_job.c b/drivers/gpu/drm/imagination/pvr_job.c index 1cdb3cfd058d7db573337a2b4f6895ee4922f9a9..59b334d094fa826f26668d98561e956ec9c51428 100644 --- a/drivers/gpu/drm/imagination/pvr_job.c +++ b/drivers/gpu/drm/imagination/pvr_job.c @@ -671,6 +671,13 @@ pvr_jobs_link_geom_frag(struct pvr_job_data *job_data, u32 *job_count) geom_job->paired_job = frag_job; frag_job->paired_job = geom_job; + /* The geometry job pvr_job structure is used when the fragment + * job is being prepared by the GPU scheduler. Have the fragment + * job hold a reference on the geometry job to prevent it being + * freed until the fragment job has finished with it. + */ + pvr_job_get(geom_job); + /* Skip the fragment job we just paired to the geometry job. */ i++; } diff --git a/drivers/gpu/drm/imagination/pvr_queue.c b/drivers/gpu/drm/imagination/pvr_queue.c index 21c185d18bb2e0569bd6e12832a74e38137bd48a..6431f6b654a2e60b86a46bd8571eb9f8133c4b53 100644 --- a/drivers/gpu/drm/imagination/pvr_queue.c +++ b/drivers/gpu/drm/imagination/pvr_queue.c @@ -856,6 +856,10 @@ static void pvr_queue_free_job(struct drm_sched_job *sched_job) struct pvr_job *job = container_of(sched_job, struct pvr_job, base); drm_sched_job_cleanup(sched_job); + + if (job->type == DRM_PVR_JOB_TYPE_FRAGMENT && job->paired_job) + pvr_job_put(job->paired_job); + job->paired_job = NULL; pvr_job_put(job); } --- base-commit: 96c85e428ebaeacd2c640eba075479ab92072ccd change-id: 20250318-ddkopsrc-1337-use-after-free-in-pvr_queue_prepare_job-16fbc74b0c20 Best regards, -- Brendan King <Brendan.King(a)imgtec.com>

3 months

3
2
0 0

[PATCH v1 1/1] x86/fred: Fix system hang during S4 resume with FRED enabled

by Xin Li (Intel)

During an S4 resume, the system first performs a cold power-on. The kernel image is initially loaded to a random linear address, and the FRED MSRs are initialized. Subsequently, the S4 image is loaded, and the kernel image is relocated to its original address from before the S4 suspend. Due to changes in the kernel text and data mappings, the FRED MSRs must be reinitialized. Reported-by: Xi Pardee <xi.pardee(a)intel.com> Reported-and-Tested-by: Todd Brandt <todd.e.brandt(a)intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Cc: stable(a)kernel.org # 6.9+ --- arch/x86/power/cpu.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 63230ff8cf4f..ef3c152c319c 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -27,6 +27,7 @@ #include <asm/mmu_context.h> #include <asm/cpu_device_id.h> #include <asm/microcode.h> +#include <asm/fred.h> #ifdef CONFIG_X86_32 __visible unsigned long saved_context_ebx; @@ -231,6 +232,21 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) */ #ifdef CONFIG_X86_64 wrmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base); + + /* + * Restore FRED configs. + * + * FRED configs are completely derived from current kernel text and + * data mappings, thus nothing needs to be saved and restored. + * + * As such, simply re-initialize FRED to restore FRED configs. + * + * Note, FRED RSPs setup needs to access percpu data structures. + */ + if (ctxt->cr4 & X86_CR4_FRED) { + cpu_init_fred_exceptions(); + cpu_init_fred_rsps(); + } #else loadsegment(fs, __KERNEL_PERCPU); #endif -- 2.48.1

3 months

6
7
0 0

[PATCH 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking

by Wayne Chang

The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. Cc: stable(a)vger.kernel.org Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Wayne Chang <waynec(a)nvidia.com> --- drivers/phy/tegra/xusb-tegra186.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index fae6242aa730..77bb27a34738 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -237,6 +237,8 @@ #define DATA0_VAL_PD BIT(1) #define USE_XUSB_AO BIT(4) +#define TEGRA_UTMI_PAD_MAX 4 + #define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \ { \ .name = _name, \ @@ -269,7 +271,7 @@ struct tegra186_xusb_padctl { /* UTMI bias and tracking */ struct clk *usb2_trk_clk; - unsigned int bias_pad_enable; + DECLARE_BITMAP(utmi_pad_enabled, TEGRA_UTMI_PAD_MAX); /* padctl context */ struct tegra186_xusb_padctl_context context; @@ -605,7 +607,7 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) mutex_lock(&padctl->lock); - if (priv->bias_pad_enable++ > 0) { + if (!bitmap_empty(priv->utmi_pad_enabled, TEGRA_UTMI_PAD_MAX)) { mutex_unlock(&padctl->lock); return; } @@ -669,12 +671,7 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) mutex_lock(&padctl->lock); - if (WARN_ON(priv->bias_pad_enable == 0)) { - mutex_unlock(&padctl->lock); - return; - } - - if (--priv->bias_pad_enable > 0) { + if (!bitmap_empty(priv->utmi_pad_enabled, TEGRA_UTMI_PAD_MAX)) { mutex_unlock(&padctl->lock); return; } @@ -697,6 +694,7 @@ static void tegra186_utmi_pad_power_on(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); struct tegra_xusb_usb2_port *port; struct device *dev = padctl->dev; unsigned int index = lane->index; @@ -705,6 +703,9 @@ static void tegra186_utmi_pad_power_on(struct phy *phy) if (!phy) return; + if (test_bit(index, priv->utmi_pad_enabled)) + return; + port = tegra_xusb_find_usb2_port(padctl, index); if (!port) { dev_err(dev, "no port found for USB2 lane %u\n", index); @@ -724,18 +725,24 @@ static void tegra186_utmi_pad_power_on(struct phy *phy) value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); value &= ~USB2_OTG_PD_DR; padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + + set_bit(index, priv->utmi_pad_enabled); } static void tegra186_utmi_pad_power_down(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); unsigned int index = lane->index; u32 value; if (!phy) return; + if (!test_bit(index, priv->utmi_pad_enabled)) + return; + dev_dbg(padctl->dev, "power down UTMI pad %u\n", index); value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); @@ -748,6 +755,8 @@ static void tegra186_utmi_pad_power_down(struct phy *phy) udelay(2); + clear_bit(index, priv->utmi_pad_enabled); + tegra186_utmi_bias_pad_power_off(padctl); } -- 2.25.1

3 months

3
3
0 0

Re: [PATCH 6.1.y 0/7] Backported patches to fix selftest tpdir2

by gregkh＠linuxfoundation.org

On Tue, Apr 01, 2025 at 03:01:19AM +0000, Kang, Wenlin wrote: > Ping ...... Context-less pings in html format for a change you sent a week ago during the middle of the merge window is not going to get you very far, sorry.

3 months

1
0
0 0

[PATCH v2] media: dvb: Add error checking for bcm3510_writeB()

by Wentao Liang

In bcm3510_bert_reset(), the function performed multiple writes without checking the return value of bcm3510_writeB(). This could result in silent failures if the writes failed, leaving the BER counter in an undefined state. Add error checking for each bcm3510_writeB call and propagate any errors immediately. This ensures proper error handling and prevents silent failures during BER counter initialization. Fixes: 55f51efdb696 ("[PATCH] dvb: flexcop: add BCM3510 ATSC frontend support for Air2PC card") Cc: stable(a)vger.kernel.org Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/media/dvb-frontends/bcm3510.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c index d935fb10e620..9e60020a8fea 100644 --- a/drivers/media/dvb-frontends/bcm3510.c +++ b/drivers/media/dvb-frontends/bcm3510.c @@ -270,10 +270,22 @@ static int bcm3510_bert_reset(struct bcm3510_state *st) if ((ret = bcm3510_readB(st,0xfa,&b)) < 0) return ret; - b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 0; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.RESYNC = 1; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.RESYNC = 0; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; /* clear residual bit counter TODO */ return 0; -- 2.42.0.windows.2

3 months

1
0
0 0

[PATCH v5] usb: xhci: quirk for data loss in ISOC transfers

by Raju Rangoju

During the High-Speed Isochronous Audio transfers, xHCI controller on certain AMD platforms experiences momentary data loss. This results in Missed Service Errors (MSE) being generated by the xHCI. The root cause of the MSE is attributed to the ISOC OUT endpoint being omitted from scheduling. This can happen when an IN endpoint with a 64ms service interval either is pre-scheduled prior to the ISOC OUT endpoint or the interval of the ISOC OUT endpoint is shorter than that of the IN endpoint. Consequently, the OUT service is neglected when an IN endpoint with a service interval exceeding 32ms is scheduled concurrently (every 64ms in this scenario). This issue is particularly seen on certain older AMD platforms. To mitigate this problem, it is recommended to adjust the service interval of the IN endpoint to not exceed 32ms (interval 8). This adjustment ensures that the OUT endpoint will not be bypassed, even if a smaller interval value is utilized. Cc: stable(a)vger.kernel.org Signed-off-by: Raju Rangoju <Raju.Rangoju(a)amd.com> --- Changes since v4: - reword the commit message. - handle the potential corner case with ISOC IN ep with 64ms ESIT Changes since v3: - Bump up the enum number XHCI_LIMIT_ENDPOINT_INTERVAL_9 Changes since v2: - added stable tag to backport to all stable kernels Changes since v1: - replaced hex values with pci device names - corrected the commit message --- drivers/usb/host/xhci-mem.c | 4 ++++ drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 30 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fdf0c1008225..364b5a9e7c3e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1420,6 +1420,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Periodic endpoint bInterval limit quirk */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) && + interval >= 9) { + interval = 8; + } if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && udev->speed >= USB_SPEED_HIGH && interval >= 7) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 54460d11f7ee..6c15b4158f06 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -71,12 +71,22 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee +#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4 +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5 +#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0 +#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1 +#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316 + #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 @@ -280,6 +290,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI)) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + + if (pdev->vendor == PCI_VENDOR_ID_ATI && + pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 779b01dee068..6de1164e2e53 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1637,6 +1637,7 @@ struct xhci_hcd { #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) #define XHCI_ETRON_HOST BIT_ULL(49) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) unsigned int num_active_eps; unsigned int limit_active_eps; -- 2.34.1

3 months

1
0
0 0

[PATCH v2] net: mdio: mux-meson-gxl: set 28th bit in eth_reg2

by Christian Hewitt

From: Da Xue <da(a)libre.computer> This bit is necessary to enable packets on the interface. Without this bit set, ethernet behaves as if it is working, but no activity occurs. The vendor SDK sets this bit along with the PHY_ID bits. U-boot also sets this bit, but if u-boot is not compiled with networking support the interface will not work. Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support"); Signed-off-by: Da Xue <da(a)libre.computer> Signed-off-by: Christian Hewitt <christianshewitt(a)gmail.com> --- Resending on behalf of Da Xue who has email sending issues. Changes since v1 [0]: - Remove blank line between Fixes and SoB tags - Submit without mail server mangling the patch - Minor tweaks to subject line and commit message - CC to stable(a)vger.kernel.org [0] https://patchwork.kernel.org/project/linux-amlogic/patch/CACqvRUbx-KsrMwCHY… drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-mux-meson-gxl.c b/drivers/net/mdio/mdio-mux-meson-gxl.c index 00c66240136b..fc5883387718 100644 --- a/drivers/net/mdio/mdio-mux-meson-gxl.c +++ b/drivers/net/mdio/mdio-mux-meson-gxl.c @@ -17,6 +17,7 @@ #define REG2_LEDACT GENMASK(23, 22) #define REG2_LEDLINK GENMASK(25, 24) #define REG2_DIV4SEL BIT(27) +#define REG2_RESERVED_28 BIT(28) #define REG2_ADCBYPASS BIT(30) #define REG2_CLKINSEL BIT(31) #define ETH_REG3 0x4 @@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv) * The only constraint is that it must match the one in * drivers/net/phy/meson-gxl.c to properly match the PHY. */ - writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), + writel(REG2_RESERVED_28 | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), priv->regs + ETH_REG2); /* Enable the internal phy */ -- 2.34.1

3 months

6
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror