This is a note to let you know that I've just added the patch titled
drm/nouveau/kms: Increase max retries in scanout position queries.
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
drm-nouveau-kms-increase-max-retries-in-scanout-position-queries.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Mario Kleiner <mario.kleiner.de(a)gmail.com>
Date: Mon, 24 Apr 2017 01:59:34 +0200
Subject: drm/nouveau/kms: Increase max retries in scanout position queries.
From: Mario Kleiner <mario.kleiner.de(a)gmail.com>
[ Upstream commit 60b95d709525e3ce1c51e1fc93175dcd1755d345 ]
So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.
Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank stuff, e.g.,
desktop compositors.
Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.
As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.
Signed-off-by: Mario Kleiner <mario.kleiner.de(a)gmail.com>
Signed-off-by: Ben Skeggs <bskeggs(a)redhat.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -104,7 +104,7 @@ nouveau_display_scanoutpos_head(struct d
};
struct nouveau_display *disp = nouveau_display(crtc->dev);
struct drm_vblank_crtc *vblank = &crtc->dev->vblank[drm_crtc_index(crtc)];
- int ret, retry = 1;
+ int ret, retry = 20;
do {
ret = nvif_mthd(&disp->disp, 0, &args, sizeof(args));
Patches currently in stable-queue which might be from mario.kleiner.de(a)gmail.com are
queue-4.4/drm-nouveau-kms-increase-max-retries-in-scanout-position-queries.patch
This is a note to let you know that I've just added the patch titled
drm/msm: fix leak in failed get_pages
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
drm-msm-fix-leak-in-failed-get_pages.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Prakash Kamliya <pkamliya(a)codeaurora.org>
Date: Mon, 4 Dec 2017 19:10:15 +0530
Subject: drm/msm: fix leak in failed get_pages
From: Prakash Kamliya <pkamliya(a)codeaurora.org>
[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]
get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.
Signed-off-by: Prakash Kamliya <pkamliya(a)codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty(a)codeaurora.org>
Signed-off-by: Rob Clark <robdclark(a)gmail.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/gpu/drm/msm/msm_gem.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -89,14 +89,17 @@ static struct page **get_pages(struct dr
return p;
}
+ msm_obj->pages = p;
+
msm_obj->sgt = drm_prime_pages_to_sg(p, npages);
if (IS_ERR(msm_obj->sgt)) {
+ void *ptr = ERR_CAST(msm_obj->sgt);
+
dev_err(dev->dev, "failed to allocate sgt\n");
- return ERR_CAST(msm_obj->sgt);
+ msm_obj->sgt = NULL;
+ return ptr;
}
- msm_obj->pages = p;
-
/* For non-cached buffers, ensure the new pages are clean
* because display controller, GPU, etc. are not coherent:
*/
@@ -119,7 +122,10 @@ static void put_pages(struct drm_gem_obj
if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl,
msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
- sg_free_table(msm_obj->sgt);
+
+ if (msm_obj->sgt)
+ sg_free_table(msm_obj->sgt);
+
kfree(msm_obj->sgt);
if (use_pages(obj))
Patches currently in stable-queue which might be from pkamliya(a)codeaurora.org are
queue-4.4/drm-msm-fix-leak-in-failed-get_pages.patch
This is a note to let you know that I've just added the patch titled
cpufreq/sh: Replace racy task affinity logic
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
cpufreq-sh-replace-racy-task-affinity-logic.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Thomas Gleixner <tglx(a)linutronix.de>
Date: Wed, 12 Apr 2017 22:07:36 +0200
Subject: cpufreq/sh: Replace racy task affinity logic
From: Thomas Gleixner <tglx(a)linutronix.de>
[ Upstream commit 205dcc1ecbc566cbc20acf246e68de3b080b3ecf ]
The target() callback must run on the affected cpu. This is achieved by
temporarily setting the affinity of the calling thread to the requested CPU
and reset it to the original affinity afterwards.
That's racy vs. concurrent affinity settings for that thread resulting in
code executing on the wrong CPU.
Replace it by work_on_cpu(). All call pathes which invoke the callbacks are
already protected against CPU hotplug.
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar(a)linaro.org>
Cc: Fenghua Yu <fenghua.yu(a)intel.com>
Cc: Tony Luck <tony.luck(a)intel.com>
Cc: Herbert Xu <herbert(a)gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net>
Cc: Peter Zijlstra <peterz(a)infradead.org>
Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy(a)linutronix.de>
Cc: linux-pm(a)vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai(a)gmail.com>
Cc: Michael Ellerman <mpe(a)ellerman.id.au>
Cc: Tejun Heo <tj(a)kernel.org>
Cc: "David S. Miller" <davem(a)davemloft.net>
Cc: Len Brown <lenb(a)kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.958216363@linutronix.de
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/cpufreq/sh-cpufreq.c | 45 +++++++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 18 deletions(-)
--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -30,54 +30,63 @@
static DEFINE_PER_CPU(struct clk, sh_cpuclk);
+struct cpufreq_target {
+ struct cpufreq_policy *policy;
+ unsigned int freq;
+};
+
static unsigned int sh_cpufreq_get(unsigned int cpu)
{
return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
}
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+static long __sh_cpufreq_target(void *arg)
{
- unsigned int cpu = policy->cpu;
+ struct cpufreq_target *target = arg;
+ struct cpufreq_policy *policy = target->policy;
+ int cpu = policy->cpu;
struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- cpumask_t cpus_allowed;
struct cpufreq_freqs freqs;
struct device *dev;
long freq;
- cpus_allowed = current->cpus_allowed;
- set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
- BUG_ON(smp_processor_id() != cpu);
+ if (smp_processor_id() != cpu)
+ return -ENODEV;
dev = get_cpu_device(cpu);
/* Convert target_freq from kHz to Hz */
- freq = clk_round_rate(cpuclk, target_freq * 1000);
+ freq = clk_round_rate(cpuclk, target->freq * 1000);
if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
return -EINVAL;
- dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
+ dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
freqs.old = sh_cpufreq_get(cpu);
freqs.new = (freq + 500) / 1000;
freqs.flags = 0;
- cpufreq_freq_transition_begin(policy, &freqs);
- set_cpus_allowed_ptr(current, &cpus_allowed);
+ cpufreq_freq_transition_begin(target->policy, &freqs);
clk_set_rate(cpuclk, freq);
- cpufreq_freq_transition_end(policy, &freqs, 0);
+ cpufreq_freq_transition_end(target->policy, &freqs, 0);
dev_dbg(dev, "set frequency %lu Hz\n", freq);
-
return 0;
}
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int sh_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_target data = { .policy = policy, .freq = target_freq };
+
+ return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
+}
+
static int sh_cpufreq_verify(struct cpufreq_policy *policy)
{
struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
Patches currently in stable-queue which might be from tglx(a)linutronix.de are
queue-4.4/acpi-processor-fix-error-handling-in-__acpi_processor_start.patch
queue-4.4/acpi-processor-replace-racy-task-affinity-logic.patch
queue-4.4/time-change-posix-clocks-ops-interfaces-to-use-timespec64.patch
queue-4.4/genirq-use-irqd_get_trigger_type-to-compare-the-trigger-type-for-shared-irqs.patch
queue-4.4/cpufreq-sh-replace-racy-task-affinity-logic.patch
This is a note to let you know that I've just added the patch titled
cros_ec: fix nul-termination for firmware build info
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
cros_ec-fix-nul-termination-for-firmware-build-info.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Mon, 4 Dec 2017 15:49:48 +0100
Subject: cros_ec: fix nul-termination for firmware build info
From: Arnd Bergmann <arnd(a)arndb.de>
[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ]
As gcc-8 reports, we zero out the wrong byte:
drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version':
drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds]
This changes the code back to what it did before changing to a
zero-length array structure.
Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Benson Leung <bleung(a)chromium.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/platform/chrome/cros_ec_sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -187,7 +187,7 @@ static ssize_t show_ec_version(struct de
count += scnprintf(buf + count, PAGE_SIZE - count,
"Build info: EC error %d\n", msg->result);
else {
- msg->data[sizeof(msg->data) - 1] = '\0';
+ msg->data[EC_HOST_PARAM_SIZE - 1] = '\0';
count += scnprintf(buf + count, PAGE_SIZE - count,
"Build info: %s\n", msg->data);
}
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.4/time-change-posix-clocks-ops-interfaces-to-use-timespec64.patch
queue-4.4/cros_ec-fix-nul-termination-for-firmware-build-info.patch
This is a note to let you know that I've just added the patch titled
dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
dmaengine-ti-dma-crossbar-fix-event-mapping-for-tpcc_evt_mux_60_63.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:33 CET 2018
From: Vignesh R <vigneshr(a)ti.com>
Date: Tue, 19 Dec 2017 12:51:16 +0200
Subject: dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
From: Vignesh R <vigneshr(a)ti.com>
[ Upstream commit d087f15786021a9605b20f4c678312510be4cac1 ]
Register layout of a typical TPCC_EVT_MUX_M_N register is such that the
lowest numbered event is at the lowest byte address and highest numbered
event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is
different, in that the lowest numbered event is at the highest address
and highest numbered event is at the lowest address. Therefore, modify
ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register
accordingly.
Signed-off-by: Vignesh R <vigneshr(a)ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com>
Signed-off-by: Vinod Koul <vinod.koul(a)intel.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/dma/ti-dma-crossbar.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -51,7 +51,15 @@ struct ti_am335x_xbar_map {
static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
{
- writeb_relaxed(val, iomem + event);
+ /*
+ * TPCC_EVT_MUX_60_63 register layout is different than the
+ * rest, in the sense, that event 63 is mapped to lowest byte
+ * and event 60 is mapped to highest, handle it separately.
+ */
+ if (event >= 60 && event <= 63)
+ writeb_relaxed(val, iomem + (63 - event % 4));
+ else
+ writeb_relaxed(val, iomem + event);
}
static void ti_am335x_xbar_free(struct device *dev, void *route_data)
Patches currently in stable-queue which might be from vigneshr(a)ti.com are
queue-4.4/dmaengine-ti-dma-crossbar-fix-event-mapping-for-tpcc_evt_mux_60_63.patch
This is a note to let you know that I've just added the patch titled
coresight: Fix disabling of CoreSight TPIU
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
coresight-fix-disabling-of-coresight-tpiu.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:33 CET 2018
From: Robert Walker <robert.walker(a)arm.com>
Date: Mon, 18 Dec 2017 11:05:44 -0700
Subject: coresight: Fix disabling of CoreSight TPIU
From: Robert Walker <robert.walker(a)arm.com>
[ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ]
The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.
This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.
Signed-off-by: Robert Walker <robert.walker(a)arm.com>
Tested-by: Mike Leach <mike.leach(a)linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier(a)linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/hwtracing/coresight/coresight-tpiu.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -45,8 +45,11 @@
#define TPIU_ITATBCTR0 0xef8
/** register definition **/
+/* FFSR - 0x300 */
+#define FFSR_FT_STOPPED BIT(1)
/* FFCR - 0x304 */
#define FFCR_FON_MAN BIT(6)
+#define FFCR_STOP_FI BIT(12)
/**
* @base: memory mapped base address for this component.
@@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_
{
CS_UNLOCK(drvdata->base);
- /* Clear formatter controle reg. */
- writel_relaxed(0x0, drvdata->base + TPIU_FFCR);
+ /* Clear formatter and stop on flush */
+ writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR);
/* Generate manual flush */
- writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+ writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+ /* Wait for flush to complete */
+ coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+ /* Wait for formatter to stop */
+ coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
CS_LOCK(drvdata->base);
}
Patches currently in stable-queue which might be from robert.walker(a)arm.com are
queue-4.4/coresight-fix-disabling-of-coresight-tpiu.patch
This is a note to let you know that I've just added the patch titled
clk: ns2: Correct SDIO bits
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
clk-ns2-correct-sdio-bits.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com>
Date: Mon, 20 Mar 2017 18:12:14 -0400
Subject: clk: ns2: Correct SDIO bits
From: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com>
[ Upstream commit 8973aa4aecac223548366ca81818309a0f0efa6d ]
Corrected the bits for power and iso.
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com>
Signed-off-by: Jon Mason <jon.mason(a)broadcom.com>
Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC")
Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/clk/bcm/clk-ns2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/bcm/clk-ns2.c
+++ b/drivers/clk/bcm/clk-ns2.c
@@ -103,7 +103,7 @@ CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm
static const struct iproc_pll_ctrl genpll_sw = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
- .aon = AON_VAL(0x0, 2, 9, 8),
+ .aon = AON_VAL(0x0, 1, 11, 10),
.reset = RESET_VAL(0x4, 2, 1),
.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
.ndiv_int = REG_VAL(0x8, 4, 10),
Patches currently in stable-queue which might be from bharat.gooty(a)broadcom.com are
queue-4.4/clk-ns2-correct-sdio-bits.patch
This is a note to let you know that I've just added the patch titled
clk: si5351: Rename internal plls to avoid name collisions
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
clk-si5351-rename-internal-plls-to-avoid-name-collisions.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:33 CET 2018
From: Sergej Sawazki <sergej(a)taudac.com>
Date: Tue, 25 Jul 2017 23:21:02 +0200
Subject: clk: si5351: Rename internal plls to avoid name collisions
From: Sergej Sawazki <sergej(a)taudac.com>
[ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ]
This drivers probe fails due to a clock name collision if a clock named
'plla' or 'pllb' is already registered when registering this drivers
internal plls.
Fix it by renaming internal plls to avoid name collisions.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth(a)gmail.com>
Cc: Rabeeh Khoury <rabeeh(a)solid-run.com>
Signed-off-by: Sergej Sawazki <sergej(a)taudac.com>
Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/clk/clk-si5351.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -72,7 +72,7 @@ static const char * const si5351_input_n
"xtal", "clkin"
};
static const char * const si5351_pll_names[] = {
- "plla", "pllb", "vxco"
+ "si5351_plla", "si5351_pllb", "si5351_vxco"
};
static const char * const si5351_msynth_names[] = {
"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
Patches currently in stable-queue which might be from sergej(a)taudac.com are
queue-4.4/clk-si5351-rename-internal-plls-to-avoid-name-collisions.patch
This is a note to let you know that I've just added the patch titled
Btrfs: send, fix file hole not being preserved due to inline extent
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
btrfs-send-fix-file-hole-not-being-preserved-due-to-inline-extent.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Filipe Manana <fdmanana(a)suse.com>
Date: Tue, 4 Apr 2017 20:31:00 +0100
Subject: Btrfs: send, fix file hole not being preserved due to inline extent
From: Filipe Manana <fdmanana(a)suse.com>
[ Upstream commit e1cbfd7bf6dabdac561c75d08357571f44040a45 ]
Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
$ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar
In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7bf6
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.
So teach the incremental send code to deal with this particular case.
The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).
Signed-off-by: Filipe Manana <fdmanana(a)suse.com>
Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/btrfs/send.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5008,13 +5008,19 @@ static int is_extent_unchanged(struct se
while (key.offset < ekey->offset + left_len) {
ei = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
right_type = btrfs_file_extent_type(eb, ei);
- if (right_type != BTRFS_FILE_EXTENT_REG) {
+ if (right_type != BTRFS_FILE_EXTENT_REG &&
+ right_type != BTRFS_FILE_EXTENT_INLINE) {
ret = 0;
goto out;
}
right_disknr = btrfs_file_extent_disk_bytenr(eb, ei);
- right_len = btrfs_file_extent_num_bytes(eb, ei);
+ if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+ right_len = btrfs_file_extent_inline_len(eb, slot, ei);
+ right_len = PAGE_ALIGN(right_len);
+ } else {
+ right_len = btrfs_file_extent_num_bytes(eb, ei);
+ }
right_offset = btrfs_file_extent_offset(eb, ei);
right_gen = btrfs_file_extent_generation(eb, ei);
@@ -5028,6 +5034,19 @@ static int is_extent_unchanged(struct se
goto out;
}
+ /*
+ * We just wanted to see if when we have an inline extent, what
+ * follows it is a regular extent (wanted to check the above
+ * condition for inline extents too). This should normally not
+ * happen but it's possible for example when we have an inline
+ * compressed extent representing data with a size matching
+ * the page size (currently the same as sector size).
+ */
+ if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+ ret = 0;
+ goto out;
+ }
+
left_offset_fixed = left_offset;
if (key.offset < ekey->offset) {
/* Fix the right offset for 2a and 7. */
Patches currently in stable-queue which might be from fdmanana(a)suse.com are
queue-4.4/btrfs-send-fix-file-hole-not-being-preserved-due-to-inline-extent.patch
This is a note to let you know that I've just added the patch titled
cifs: small underflow in cnvrtDosUnixTm()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
cifs-small-underflow-in-cnvrtdosunixtm.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Dan Carpenter <dan.carpenter(a)oracle.com>
Date: Mon, 1 May 2017 21:43:43 +0300
Subject: cifs: small underflow in cnvrtDosUnixTm()
From: Dan Carpenter <dan.carpenter(a)oracle.com>
[ Upstream commit 564277eceeca01e02b1ef3e141cfb939184601b4 ]
January is month 1. There is no zero-th month. If someone passes a
zero month then it means we read from one space before the start of the
total_days_of_prev_months[] array.
We may as well also be strict about days as well.
Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1")
Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com>
Signed-off-by: Steve French <smfrench(a)gmail.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/cifs/netmisc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -980,10 +980,10 @@ struct timespec cnvrtDosUnixTm(__le16 le
cifs_dbg(VFS, "illegal hours %d\n", st->Hours);
days = sd->Day;
month = sd->Month;
- if ((days > 31) || (month > 12)) {
+ if (days < 1 || days > 31 || month < 1 || month > 12) {
cifs_dbg(VFS, "illegal date, month %d day: %d\n", month, days);
- if (month > 12)
- month = 12;
+ days = clamp(days, 1, 31);
+ month = clamp(month, 1, 12);
}
month -= 1;
days += total_days_of_prev_months[month];
Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are
queue-4.4/asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch
queue-4.4/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch
queue-4.4/hsi-ssi_protocol-double-free-in-ssip_pn_xmit.patch
queue-4.4/cifs-small-underflow-in-cnvrtdosunixtm.patch