- Linux-stable-mirror - lists.linaro.org

Patch "net: arc_emac: fix arc_emac_rx() error paths" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: arc_emac: fix arc_emac_rx() error paths to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-arc_emac-fix-arc_emac_rx-error-paths.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Alexander Kochetkov <al.kochet(a)gmail.com> Date: Fri, 15 Dec 2017 20:20:06 +0300 Subject: net: arc_emac: fix arc_emac_rx() error paths From: Alexander Kochetkov <al.kochet(a)gmail.com> [ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ] arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-) --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -250,39 +250,48 @@ static int arc_emac_rx(struct net_device continue; } - pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; } - /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); Patches currently in stable-queue which might be from al.kochet(a)gmail.com are queue-3.18/net-arc_emac-fix-arc_emac_rx-error-paths.patch

7 years, 4 months

1
0
0 0

Patch "net: gianfar_ptp: move set_fipers() to spinlock protecting area" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: gianfar_ptp: move set_fipers() to spinlock protecting area to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Yangbo Lu <yangbo.lu(a)nxp.com> Date: Tue, 9 Jan 2018 11:02:33 +0800 Subject: net: gianfar_ptp: move set_fipers() to spinlock protecting area From: Yangbo Lu <yangbo.lu(a)nxp.com> [ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu(a)nxp.com> Acked-by: Richard Cochran <richardcochran(a)gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -314,11 +314,10 @@ static int ptp_gianfar_adjtime(struct pt now = tmr_cnt_read(etsects); now += delta; tmr_cnt_write(etsects, now); + set_fipers(etsects); spin_unlock_irqrestore(&etsects->lock, flags); - set_fipers(etsects); - return 0; } Patches currently in stable-queue which might be from yangbo.lu(a)nxp.com are queue-3.18/net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch

7 years, 4 months

1
0
0 0

Patch "mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-gpmi-fix-failure-when-a-erased-page-has-a-bitflip-at-bbm.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Sascha Hauer <s.hauer(a)pengutronix.de> Date: Tue, 5 Dec 2017 11:51:40 +0100 Subject: mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM From: Sascha Hauer <s.hauer(a)pengutronix.de> [ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ] When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by: Sascha Hauer <s.hauer(a)pengutronix.de> Reviewed-by: Richard Weinberger <richard(a)nod.at> Acked-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1025,9 +1025,6 @@ static int gpmi_ecc_read_page(struct mtd return ret; } - /* handle the block mark swapping */ - block_mark_swapping(this, payload_virt, auxiliary_virt); - /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset; @@ -1043,6 +1040,9 @@ static int gpmi_ecc_read_page(struct mtd max_bitflips = max_t(unsigned int, max_bitflips, *status); } + /* handle the block mark swapping */ + block_mark_swapping(this, buf, auxiliary_virt); + if (oob_required) { /* * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() Patches currently in stable-queue which might be from s.hauer(a)pengutronix.de are queue-3.18/mtd-nand-gpmi-fix-failure-when-a-erased-page-has-a-bitflip-at-bbm.patch

7 years, 4 months

1
0
0 0

Patch "led: core: Fix brightness setting when setting delay_off=0" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled led: core: Fix brightness setting when setting delay_off=0 to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: led-core-fix-brightness-setting-when-setting-delay_off-0.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Matthieu CASTET <matthieu.castet(a)parrot.com> Date: Tue, 12 Dec 2017 11:10:44 +0100 Subject: led: core: Fix brightness setting when setting delay_off=0 From: Matthieu CASTET <matthieu.castet(a)parrot.com> [ Upstream commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c ] With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set --- drivers/leds/led-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -76,7 +76,7 @@ void led_blink_set(struct led_classdev * unsigned long *delay_on, unsigned long *delay_off) { - del_timer_sync(&led_cdev->blink_timer); + led_stop_software_blink(led_cdev); led_cdev->flags &= ~LED_BLINK_ONESHOT; led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP; Patches currently in stable-queue which might be from matthieu.castet(a)parrot.com are queue-3.18/led-core-fix-brightness-setting-when-setting-delay_off-0.patch

7 years, 4 months

1
0
0 0

Patch "mdio-sun4i: Fix a memory leak" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mdio-sun4i: Fix a memory leak to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mdio-sun4i-fix-a-memory-leak.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sat, 6 Jan 2018 09:00:09 +0100 Subject: mdio-sun4i: Fix a memory leak From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ] If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/mdio-sun4i.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -128,8 +128,10 @@ static int sun4i_mdio_probe(struct platf data->regulator = devm_regulator_get(&pdev->dev, "phy"); if (IS_ERR(data->regulator)) { - if (PTR_ERR(data->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(data->regulator) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_out_free_mdiobus; + } dev_info(&pdev->dev, "no regulator found\n"); } else { Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-3.18/mdio-sun4i-fix-a-memory-leak.patch

7 years, 4 months

1
0
0 0

Patch "ipv6: icmp6: Allow icmp messages to be looped back" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipv6: icmp6: Allow icmp messages to be looped back to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipv6-icmp6-allow-icmp-messages-to-be-looped-back.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Brendan McGrath <redmcg(a)redmandi.dyndns.org> Date: Wed, 13 Dec 2017 22:14:57 +1100 Subject: ipv6: icmp6: Allow icmp messages to be looped back From: Brendan McGrath <redmcg(a)redmandi.dyndns.org> [ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg(a)redmandi.dyndns.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1367,6 +1367,7 @@ struct dst_entry *icmp6_dst_alloc(struct } rt->dst.flags |= DST_HOST; + rt->dst.input = ip6_input; rt->dst.output = ip6_output; atomic_set(&rt->dst.__refcnt, 1); rt->rt6i_gateway = fl6->daddr; Patches currently in stable-queue which might be from redmcg(a)redmandi.dyndns.org are queue-3.18/ipv6-icmp6-allow-icmp-messages-to-be-looped-back.patch

7 years, 4 months

1
0
0 0

Patch "e1000: fix disabling already-disabled warning" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled e1000: fix disabling already-disabled warning to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: e1000-fix-disabling-already-disabled-warning.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Tushar Dave <tushar.n.dave(a)oracle.com> Date: Wed, 6 Dec 2017 02:26:29 +0530 Subject: e1000: fix disabling already-disabled warning From: Tushar Dave <tushar.n.dave(a)oracle.com> [ Upstream commit 0b76aae741abb9d16d2c0e67f8b1e766576f897d ] This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave <tushar.n.dave(a)oracle.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/e1000/e1000.h | 3 +- drivers/net/ethernet/intel/e1000/e1000_main.c | 27 +++++++++++++++++++++----- 2 files changed, 24 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -328,7 +328,8 @@ struct e1000_adapter { enum e1000_state_t { __E1000_TESTING, __E1000_RESETTING, - __E1000_DOWN + __E1000_DOWN, + __E1000_DISABLED }; #undef pr_fmt --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -940,7 +940,7 @@ static int e1000_init_hw_struct(struct e static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; - struct e1000_adapter *adapter; + struct e1000_adapter *adapter = NULL; struct e1000_hw *hw; static int cards_found = 0; @@ -950,6 +950,7 @@ static int e1000_probe(struct pci_dev *p u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; + bool disable_dev = false; /* do not allocate ioport bars when not needed */ need_ioport = e1000_is_need_ioport(pdev); @@ -1250,11 +1251,13 @@ err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: - pci_disable_device(pdev); + if (!adapter || disable_dev) + pci_disable_device(pdev); return err; } @@ -1272,6 +1275,7 @@ static void e1000_remove(struct pci_dev struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + bool disable_dev; e1000_down_and_stop(adapter); e1000_release_manageability(adapter); @@ -1290,9 +1294,11 @@ static void e1000_remove(struct pci_dev iounmap(hw->flash_address); pci_release_selected_regions(pdev, adapter->bars); + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); - pci_disable_device(pdev); + if (disable_dev) + pci_disable_device(pdev); } /** @@ -5137,7 +5143,8 @@ static int __e1000_shutdown(struct pci_d if (netif_running(netdev)) e1000_free_irq(adapter); - pci_disable_device(pdev); + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); return 0; } @@ -5181,6 +5188,10 @@ static int e1000_resume(struct pci_dev * pr_err("Cannot enable PCI device from suspend\n"); return err; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -5255,7 +5266,9 @@ static pci_ers_result_t e1000_io_error_d if (netif_running(netdev)) e1000_down(adapter); - pci_disable_device(pdev); + + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); /* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -5283,6 +5296,10 @@ static pci_ers_result_t e1000_io_slot_re pr_err("Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); Patches currently in stable-queue which might be from tushar.n.dave(a)oracle.com are queue-3.18/e1000-fix-disabling-already-disabled-warning.patch

7 years, 4 months

1
0
0 0

Patch "bnx2x: Improve reliability in case of nested PCI errors" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Improve reliability in case of nested PCI errors to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-improve-reliability-in-case-of-nested-pci-errors.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: "Guilherme G. Piccoli" <gpiccoli(a)linux.vnet.ibm.com> Date: Fri, 22 Dec 2017 13:01:39 -0200 Subject: bnx2x: Improve reliability in case of nested PCI errors From: "Guilherme G. Piccoli" <gpiccoli(a)linux.vnet.ibm.com> [ Upstream commit f7084059a9cb9e56a186e1677b1dcffd76c2cd24 ] While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem <abdhalee(a)linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli(a)linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2994,7 +2994,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i del_timer_sync(&bp->timer); - if (IS_PF(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* Set ALWAYS_ALIVE bit in shmem */ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; bnx2x_drv_pulse(bp); @@ -3076,7 +3076,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i bp->cnic_loaded = false; /* Clear driver version indication in shmem */ - if (IS_PF(bp)) + if (IS_PF(bp) && !BP_NOMCP(bp)) bnx2x_update_mng_version(bp); /* Check if there are pending parity attentions. If there are - set --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9472,6 +9472,15 @@ static int bnx2x_init_shmem(struct bnx2x do { bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + if (bp->common.shmem_base) { val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); if (val & SHR_MEM_VALIDITY_MB) @@ -13743,7 +13752,10 @@ static pci_ers_result_t bnx2x_io_slot_re BNX2X_ERR("IO slot reset --> driver unload\n"); /* MCP should have been reset; Need to wait for validity */ - bnx2x_init_shmem(bp); + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 v; Patches currently in stable-queue which might be from gpiccoli(a)linux.vnet.ibm.com are queue-3.18/bnx2x-improve-reliability-in-case-of-nested-pci-errors.patch

7 years, 4 months

1
0
0 0

Patch "drm/ttm: check the return value of kzalloc" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/ttm: check the return value of kzalloc to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-ttm-check-the-return-value-of-kzalloc.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:16:23 CET 2018 From: Xiongwei Song <sxwjean(a)gmail.com> Date: Tue, 2 Jan 2018 21:24:55 +0800 Subject: drm/ttm: check the return value of kzalloc From: Xiongwei Song <sxwjean(a)gmail.com> [ Upstream commit 19d859a7205bc59ffc38303eb25ae394f61d21dc ] In the function ttm_page_alloc_init, kzalloc call is made for variable _manager, we need to check its return value, it may return NULL. Signed-off-by: Xiongwei Song <sxwjean(a)gmail.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -818,6 +818,8 @@ int ttm_page_alloc_init(struct ttm_mem_g pr_info("Initializing pool allocator\n"); _manager = kzalloc(sizeof(*_manager), GFP_KERNEL); + if (!_manager) + return -ENOMEM; ttm_page_pool_init_locked(&_manager->wc_pool, GFP_HIGHUSER, "wc"); Patches currently in stable-queue which might be from sxwjean(a)gmail.com are queue-3.18/drm-ttm-check-the-return-value-of-kzalloc.patch

7 years, 4 months

1
0
0 0

Patch "xfs: quota: check result of register_shrinker()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfs: quota: check result of register_shrinker() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfs-quota-check-result-of-register_shrinker.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Aliaksei Karaliou <akaraliou.dev(a)gmail.com> Date: Thu, 21 Dec 2017 13:18:26 -0800 Subject: xfs: quota: check result of register_shrinker() From: Aliaksei Karaliou <akaraliou.dev(a)gmail.com> [ Upstream commit 3a3882ff26fbdbaf5f7e13f6a0bccfbf7121041d ] xfs_qm_init_quotainfo() does not check result of register_shrinker() which was tagged as __must_check recently, reported by sparse. Signed-off-by: Aliaksei Karaliou <akaraliou.dev(a)gmail.com> [darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos] Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/xfs/xfs_qm.c | 45 +++++++++++++++++++++++++++++---------------- 1 file changed, 29 insertions(+), 16 deletions(-) --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -47,7 +47,7 @@ STATIC int xfs_qm_init_quotainos(xfs_mount_t *); STATIC int xfs_qm_init_quotainfo(xfs_mount_t *); - +STATIC void xfs_qm_destroy_quotainos(xfs_quotainfo_t *qi); STATIC void xfs_qm_dqfree_one(struct xfs_dquot *dqp); /* * We use the batch lookup interface to iterate over the dquots as it @@ -694,9 +694,17 @@ xfs_qm_init_quotainfo( qinf->qi_shrinker.scan_objects = xfs_qm_shrink_scan; qinf->qi_shrinker.seeks = DEFAULT_SEEKS; qinf->qi_shrinker.flags = SHRINKER_NUMA_AWARE; - register_shrinker(&qinf->qi_shrinker); + + error = register_shrinker(&qinf->qi_shrinker); + if (error) + goto out_free_inos; + return 0; +out_free_inos: + mutex_destroy(&qinf->qi_quotaofflock); + mutex_destroy(&qinf->qi_tree_lock); + xfs_qm_destroy_quotainos(qinf); out_free_lru: list_lru_destroy(&qinf->qi_lru); out_free_qinf: @@ -705,7 +713,6 @@ out_free_qinf: return error; } - /* * Gets called when unmounting a filesystem or when all quotas get * turned off. @@ -722,19 +729,7 @@ xfs_qm_destroy_quotainfo( unregister_shrinker(&qi->qi_shrinker); list_lru_destroy(&qi->qi_lru); - - if (qi->qi_uquotaip) { - IRELE(qi->qi_uquotaip); - qi->qi_uquotaip = NULL; /* paranoia */ - } - if (qi->qi_gquotaip) { - IRELE(qi->qi_gquotaip); - qi->qi_gquotaip = NULL; - } - if (qi->qi_pquotaip) { - IRELE(qi->qi_pquotaip); - qi->qi_pquotaip = NULL; - } + xfs_qm_destroy_quotainos(qi); mutex_destroy(&qi->qi_tree_lock); mutex_destroy(&qi->qi_quotaofflock); kmem_free(qi); @@ -1621,6 +1616,24 @@ error_rele: } STATIC void +xfs_qm_destroy_quotainos( + xfs_quotainfo_t *qi) +{ + if (qi->qi_uquotaip) { + IRELE(qi->qi_uquotaip); + qi->qi_uquotaip = NULL; /* paranoia */ + } + if (qi->qi_gquotaip) { + IRELE(qi->qi_gquotaip); + qi->qi_gquotaip = NULL; + } + if (qi->qi_pquotaip) { + IRELE(qi->qi_pquotaip); + qi->qi_pquotaip = NULL; + } +} + +STATIC void xfs_qm_dqfree_one( struct xfs_dquot *dqp) { Patches currently in stable-queue which might be from akaraliou.dev(a)gmail.com are queue-4.9/xfs-quota-fix-missed-destroy-of-qi_tree_lock.patch queue-4.9/xfs-quota-check-result-of-register_shrinker.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror