- Linux-stable-mirror - lists.linaro.org

patch "iio: adc: rzg2l: Cleanup suspend/resume path" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: rzg2l: Cleanup suspend/resume path to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From a3c6eabe3bbd6b0e7124d68b2d3bc32fed17362e Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Sun, 10 Aug 2025 15:33:27 +0300 Subject: iio: adc: rzg2l: Cleanup suspend/resume path There is no need to manually track the runtime PM status in the driver. The pm_runtime_force_suspend() and pm_runtime_force_resume() functions already call pm_runtime_status_suspended() to check the runtime PM state. Additionally, avoid calling pm_runtime_put_autosuspend() during the suspend/resume path, as this would decrease the usage counter of a potential user that had the ADC open before the suspend/resume cycle. Fixes: 563cf94f9329 ("iio: adc: rzg2l_adc: Add suspend/resume support") Reviewed-by: Ulf Hansson <ulf.hansson(a)linaro.org> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://patch.msgid.link/20250810123328.800104-2-claudiu.beznea.uj@bp.renes… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/rzg2l_adc.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c index 9674d48074c9..0cb5a67fd497 100644 --- a/drivers/iio/adc/rzg2l_adc.c +++ b/drivers/iio/adc/rzg2l_adc.c @@ -89,7 +89,6 @@ struct rzg2l_adc { struct completion completion; struct mutex lock; u16 last_val[RZG2L_ADC_MAX_CHANNELS]; - bool was_rpm_active; }; /** @@ -541,14 +540,9 @@ static int rzg2l_adc_suspend(struct device *dev) }; int ret; - if (pm_runtime_suspended(dev)) { - adc->was_rpm_active = false; - } else { - ret = pm_runtime_force_suspend(dev); - if (ret) - return ret; - adc->was_rpm_active = true; - } + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; ret = reset_control_bulk_assert(ARRAY_SIZE(resets), resets); if (ret) @@ -557,9 +551,7 @@ static int rzg2l_adc_suspend(struct device *dev) return 0; rpm_restore: - if (adc->was_rpm_active) - pm_runtime_force_resume(dev); - + pm_runtime_force_resume(dev); return ret; } @@ -577,11 +569,9 @@ static int rzg2l_adc_resume(struct device *dev) if (ret) return ret; - if (adc->was_rpm_active) { - ret = pm_runtime_force_resume(dev); - if (ret) - goto resets_restore; - } + ret = pm_runtime_force_resume(dev); + if (ret) + goto resets_restore; ret = rzg2l_adc_hw_init(dev, adc); if (ret) @@ -590,10 +580,7 @@ static int rzg2l_adc_resume(struct device *dev) return 0; rpm_restore: - if (adc->was_rpm_active) { - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } + pm_runtime_force_suspend(dev); resets_restore: reset_control_bulk_assert(ARRAY_SIZE(resets), resets); return ret; -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: adc: rzg2l_adc: Set driver data before enabling runtime PM" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: rzg2l_adc: Set driver data before enabling runtime PM to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From c69e13965f26b8058f538ea8bdbd2d7718cf1fbe Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Sun, 10 Aug 2025 15:33:28 +0300 Subject: iio: adc: rzg2l_adc: Set driver data before enabling runtime PM When stress-testing the system by repeatedly unbinding and binding the ADC device in a loop, and the ADC is a supplier for another device (e.g., a thermal hardware block that reads temperature through the ADC), it may happen that the ADC device is runtime-resumed immediately after runtime PM is enabled, triggered by its consumer. At this point, since drvdata is not yet set and the driver's runtime PM callbacks rely on it, a crash can occur. To avoid this, set drvdata just after it was allocated. Fixes: 89ee8174e8c8 ("iio: adc: rzg2l_adc: Simplify the runtime PM code") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://patch.msgid.link/20250810123328.800104-3-claudiu.beznea.uj@bp.renes… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/rzg2l_adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c index 0cb5a67fd497..cadb0446bc29 100644 --- a/drivers/iio/adc/rzg2l_adc.c +++ b/drivers/iio/adc/rzg2l_adc.c @@ -427,6 +427,8 @@ static int rzg2l_adc_probe(struct platform_device *pdev) if (!indio_dev) return -ENOMEM; + platform_set_drvdata(pdev, indio_dev); + adc = iio_priv(indio_dev); adc->hw_params = device_get_match_data(dev); @@ -459,8 +461,6 @@ static int rzg2l_adc_probe(struct platform_device *pdev) if (ret) return ret; - platform_set_drvdata(pdev, indio_dev); - ret = rzg2l_adc_hw_init(dev, adc); if (ret) return dev_err_probe(&pdev->dev, ret, -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: adc: bd79124: Add GPIOLIB dependency" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: bd79124: Add GPIOLIB dependency to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 8a6ededaad2d2dcaac8e545bffee1073dca9db95 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen <mazziesaccount(a)gmail.com> Date: Wed, 13 Aug 2025 12:16:06 +0300 Subject: iio: adc: bd79124: Add GPIOLIB dependency The bd79124 has ADC inputs which can be muxed to be GPIOs. The driver supports this by registering a GPIO-chip for channels which aren't used as ADC. The Kconfig entry does not handle the dependency to GPIOLIB, which causes errors: ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/iio/adc/rohm-bd79124.ko] undefined! ERROR: modpost: "gpiochip_get_data" [drivers/iio/adc/rohm-bd79124.ko] undefined! at linking phase if GPIOLIB is not configured to be used. Fix this by adding dependency to the GPIOLIB. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202508131533.5sSkq80B-lkp@intel.com/ Fixes: 3f57a3b9ab74 ("iio: adc: Support ROHM BD79124 ADC") Signed-off-by: Matti Vaittinen <mazziesaccount(a)gmail.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Link: https://patch.msgid.link/6837249bddf358924e67566293944506206d2d62.175507636… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 6de2abad0197..24f2572c487e 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1300,7 +1300,7 @@ config RN5T618_ADC config ROHM_BD79124 tristate "Rohm BD79124 ADC driver" - depends on I2C + depends on I2C && GPIOLIB select REGMAP_I2C select IIO_ADC_HELPER help -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: adc: ad7124: fix channel lookup in syscalib functions" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7124: fix channel lookup in syscalib functions to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 197e299aae42ffa19028eaea92b2f30dd9fb8445 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Sat, 26 Jul 2025 11:28:48 -0500 Subject: iio: adc: ad7124: fix channel lookup in syscalib functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix possible incorrect channel lookup in the syscalib functions by using the correct channel address instead of the channel number. In the ad7124 driver, the channel field of struct iio_chan_spec is the input pin number of the positive input of the channel. This can be, but is not always the same as the index in the channels array. The correct index in the channels array is stored in the address field (and also scan_index). We use the address field to perform the correct lookup. Fixes: 47036a03a303 ("iio: adc: ad7124: Implement internal calibration at probe time") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Reviewed-by: Nuno Sá <nuno.sa(a)analog.com> Link: https://patch.msgid.link/20250726-iio-adc-ad7124-fix-channel-lookup-in-sysc… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/ad7124.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index 9808df2e9242..4d8c6bafd1c3 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -849,7 +849,7 @@ enum { static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan_spec *chan) { struct device *dev = &st->sd.spi->dev; - struct ad7124_channel *ch = &st->channels[chan->channel]; + struct ad7124_channel *ch = &st->channels[chan->address]; int ret; if (ch->syscalib_mode == AD7124_SYSCALIB_ZERO_SCALE) { @@ -865,8 +865,8 @@ static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan if (ret < 0) return ret; - dev_dbg(dev, "offset for channel %d after zero-scale calibration: 0x%x\n", - chan->channel, ch->cfg.calibration_offset); + dev_dbg(dev, "offset for channel %lu after zero-scale calibration: 0x%x\n", + chan->address, ch->cfg.calibration_offset); } else { ch->cfg.calibration_gain = st->gain_default; @@ -880,8 +880,8 @@ static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan if (ret < 0) return ret; - dev_dbg(dev, "gain for channel %d after full-scale calibration: 0x%x\n", - chan->channel, ch->cfg.calibration_gain); + dev_dbg(dev, "gain for channel %lu after full-scale calibration: 0x%x\n", + chan->address, ch->cfg.calibration_gain); } return 0; @@ -924,7 +924,7 @@ static int ad7124_set_syscalib_mode(struct iio_dev *indio_dev, { struct ad7124_state *st = iio_priv(indio_dev); - st->channels[chan->channel].syscalib_mode = mode; + st->channels[chan->address].syscalib_mode = mode; return 0; } @@ -934,7 +934,7 @@ static int ad7124_get_syscalib_mode(struct iio_dev *indio_dev, { struct ad7124_state *st = iio_priv(indio_dev); - return st->channels[chan->channel].syscalib_mode; + return st->channels[chan->address].syscalib_mode; } static const struct iio_enum ad7124_syscalib_mode_enum = { -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: temperature: maxim_thermocouple: use DMA-safe buffer for" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: temperature: maxim_thermocouple: use DMA-safe buffer for to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Mon, 21 Jul 2025 18:04:04 -0500 Subject: iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace using stack-allocated buffers with a DMA-safe buffer for use with spi_read(). This allows the driver to be safely used with DMA-enabled SPI controllers. The buffer array is also converted to a struct with a union to make the usage of the memory in the buffer more clear and ensure proper alignment. Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Reviewed-by: Nuno Sá <nuno.sa(a)analog.com> Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/temperature/maxim_thermocouple.c | 26 ++++++++++++-------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index cae8e84821d7..205939680fd4 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/spi/spi.h> +#include <linux/types.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> @@ -121,8 +122,15 @@ struct maxim_thermocouple_data { struct spi_device *spi; const struct maxim_thermocouple_chip *chip; char tc_type; - - u8 buffer[16] __aligned(IIO_DMA_MINALIGN); + /* Buffer for reading up to 2 hardware channels. */ + struct { + union { + __be16 raw16; + __be32 raw32; + __be16 raw[2]; + }; + aligned_s64 timestamp; + } buffer __aligned(IIO_DMA_MINALIGN); }; static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, @@ -130,18 +138,16 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, { unsigned int storage_bytes = data->chip->read_size; unsigned int shift = chan->scan_type.shift + (chan->address * 8); - __be16 buf16; - __be32 buf32; int ret; switch (storage_bytes) { case 2: - ret = spi_read(data->spi, (void *)&buf16, storage_bytes); - *val = be16_to_cpu(buf16); + ret = spi_read(data->spi, &data->buffer.raw16, storage_bytes); + *val = be16_to_cpu(data->buffer.raw16); break; case 4: - ret = spi_read(data->spi, (void *)&buf32, storage_bytes); - *val = be32_to_cpu(buf32); + ret = spi_read(data->spi, &data->buffer.raw32, storage_bytes); + *val = be32_to_cpu(data->buffer.raw32); break; default: ret = -EINVAL; @@ -166,9 +172,9 @@ static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private) struct maxim_thermocouple_data *data = iio_priv(indio_dev); int ret; - ret = spi_read(data->spi, data->buffer, data->chip->read_size); + ret = spi_read(data->spi, data->buffer.raw, data->chip->read_size); if (!ret) { - iio_push_to_buffers_with_ts(indio_dev, data->buffer, + iio_push_to_buffers_with_ts(indio_dev, &data->buffer, sizeof(data->buffer), iio_get_time_ns(indio_dev)); } -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: proximity: isl29501: fix buffered read on big-endian systems" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: proximity: isl29501: fix buffered read on big-endian systems to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From de18e978d0cda23e4c102e18092b63a5b0b3a800 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Tue, 22 Jul 2025 15:54:21 -0500 Subject: iio: proximity: isl29501: fix buffered read on big-endian systems Fix passing a u32 value as a u16 buffer scan item. This works on little- endian systems, but not on big-endian systems. A new local variable is introduced for getting the register value and the array is changed to a struct to make the data layout more explicit rather than just changing the type and having to recalculate the proper length needed for the timestamp. Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Link: https://patch.msgid.link/20250722-iio-use-more-iio_declare_buffer_with_ts-7… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/proximity/isl29501.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/iio/proximity/isl29501.c b/drivers/iio/proximity/isl29501.c index d1510fe24050..f69db6f2f380 100644 --- a/drivers/iio/proximity/isl29501.c +++ b/drivers/iio/proximity/isl29501.c @@ -938,12 +938,18 @@ static irqreturn_t isl29501_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct isl29501_private *isl29501 = iio_priv(indio_dev); const unsigned long *active_mask = indio_dev->active_scan_mask; - u32 buffer[4] __aligned(8) = {}; /* 1x16-bit + naturally aligned ts */ + u32 value; + struct { + u16 data; + aligned_s64 ts; + } scan = { }; - if (test_bit(ISL29501_DISTANCE_SCAN_INDEX, active_mask)) - isl29501_register_read(isl29501, REG_DISTANCE, buffer); + if (test_bit(ISL29501_DISTANCE_SCAN_INDEX, active_mask)) { + isl29501_register_read(isl29501, REG_DISTANCE, &value); + scan.data = value; + } - iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, &scan, pf->timestamp); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; -- 2.50.1

3 weeks, 3 days

1
0
0 0

patch "iio: adc: ad7173: prevent scan if too many setups requested" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7173: prevent scan if too many setups requested to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 1cfb22c277c7274f54babaa5b416dfbc00181e16 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Tue, 22 Jul 2025 14:20:07 -0500 Subject: iio: adc: ad7173: prevent scan if too many setups requested Add a check to ad7173_update_scan_mode() to ensure that we didn't exceed the maximum number of unique channel configurations. In the AD7173 family of chips, there are some chips that have 16 CHANNELx registers but only 8 setups (combination of CONFIGx, FILTERx, GAINx and OFFSETx registers). Since commit 92c247216918 ("iio: adc: ad7173: fix num_slots"), it is possible to have more than 8 channels enabled in a scan at the same time, so it is possible to get a bad configuration when more than 8 channels are using unique configurations. This happens because the algorithm to allocate the setup slots only takes into account which slot has been least recently used and doesn't know about the maximum number of slots available. Since the algorithm to allocate the setup slots is quite complex, it is simpler to check after the fact if the current state is valid or not. So this patch adds a check in ad7173_update_scan_mode() after setting up all of the configurations to make sure that the actual setup still matches the requested setup for each enabled channel. If not, we prevent the scan from being enabled and return an error. The setup comparison in ad7173_setup_equal() is refactored to a separate function since we need to call it in two places now. Fixes: 92c247216918 ("iio: adc: ad7173: fix num_slots") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Link: https://patch.msgid.link/20250722-iio-adc-ad7173-fix-setup-use-limits-v2-1-… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/ad7173.c | 87 ++++++++++++++++++++++++++++++++++------ 1 file changed, 75 insertions(+), 12 deletions(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 4413207be28f..683146e83ab2 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -200,7 +200,7 @@ struct ad7173_channel_config { /* * Following fields are used to compare equality. If you * make adaptations in it, you most likely also have to adapt - * ad7173_find_live_config(), too. + * ad7173_is_setup_equal(), too. */ struct_group(config_props, bool bipolar; @@ -561,12 +561,19 @@ static void ad7173_reset_usage_cnts(struct ad7173_state *st) st->config_usage_counter = 0; } -static struct ad7173_channel_config * -ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg) +/** + * ad7173_is_setup_equal - Compare two channel setups + * @cfg1: First channel configuration + * @cfg2: Second channel configuration + * + * Compares all configuration options that affect the registers connected to + * SETUP_SEL, namely CONFIGx, FILTERx, GAINx and OFFSETx. + * + * Returns: true if the setups are identical, false otherwise + */ +static bool ad7173_is_setup_equal(const struct ad7173_channel_config *cfg1, + const struct ad7173_channel_config *cfg2) { - struct ad7173_channel_config *cfg_aux; - int i; - /* * This is just to make sure that the comparison is adapted after * struct ad7173_channel_config was changed. @@ -579,14 +586,22 @@ ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *c u8 ref_sel; })); + return cfg1->bipolar == cfg2->bipolar && + cfg1->input_buf == cfg2->input_buf && + cfg1->odr == cfg2->odr && + cfg1->ref_sel == cfg2->ref_sel; +} + +static struct ad7173_channel_config * +ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg) +{ + struct ad7173_channel_config *cfg_aux; + int i; + for (i = 0; i < st->num_channels; i++) { cfg_aux = &st->channels[i].cfg; - if (cfg_aux->live && - cfg->bipolar == cfg_aux->bipolar && - cfg->input_buf == cfg_aux->input_buf && - cfg->odr == cfg_aux->odr && - cfg->ref_sel == cfg_aux->ref_sel) + if (cfg_aux->live && ad7173_is_setup_equal(cfg, cfg_aux)) return cfg_aux; } return NULL; @@ -1228,7 +1243,7 @@ static int ad7173_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { struct ad7173_state *st = iio_priv(indio_dev); - int i, ret; + int i, j, k, ret; for (i = 0; i < indio_dev->num_channels; i++) { if (test_bit(i, scan_mask)) @@ -1239,6 +1254,54 @@ static int ad7173_update_scan_mode(struct iio_dev *indio_dev, return ret; } + /* + * On some chips, there are more channels that setups, so if there were + * more unique setups requested than the number of available slots, + * ad7173_set_channel() will have written over some of the slots. We + * can detect this by making sure each assigned cfg_slot matches the + * requested configuration. If it doesn't, we know that the slot was + * overwritten by a different channel. + */ + for_each_set_bit(i, scan_mask, indio_dev->num_channels) { + const struct ad7173_channel_config *cfg1, *cfg2; + + cfg1 = &st->channels[i].cfg; + + for_each_set_bit(j, scan_mask, indio_dev->num_channels) { + cfg2 = &st->channels[j].cfg; + + /* + * Only compare configs that are assigned to the same + * SETUP_SEL slot and don't compare channel to itself. + */ + if (i == j || cfg1->cfg_slot != cfg2->cfg_slot) + continue; + + /* + * If we find two different configs trying to use the + * same SETUP_SEL slot, then we know that the that we + * have too many unique configurations requested for + * the available slots and at least one was overwritten. + */ + if (!ad7173_is_setup_equal(cfg1, cfg2)) { + /* + * At this point, there isn't a way to tell + * which setups are actually programmed in the + * ADC anymore, so we could read them back to + * see, but it is simpler to just turn off all + * of the live flags so that everything gets + * reprogramed on the next attempt read a sample. + */ + for (k = 0; k < st->num_channels; k++) + st->channels[k].cfg.live = false; + + dev_err(&st->sd.spi->dev, + "Too many unique channel configurations requested for scan\n"); + return -EINVAL; + } + } + } + return 0; } -- 2.50.1

3 weeks, 3 days

1
0
0 0

[PATCH v2] PCI: j721e: Fix programming sequence of "strap" settings

by Siddharth Vadapalli

The Cadence PCIe Controller integrated in the TI K3 SoCs supports both Root-Complex and Endpoint modes of operation. The Glue Layer allows "strapping" the mode of operation of the Controller, the Link Speed and the Link Width. This is enabled by programming the "PCIEn_CTRL" register (n corresponds to the PCIe instance) within the CTRL_MMR memory-mapped register space. In the PCIe Controller's register space, the same set of registers that correspond to the Root-Port configuration space when the Controller is configured for Root-Complex mode of operation, also correspond to the Physical Function configuration space when the Controller is configured for Endpoint mode of operation. As a result, the "reset-value" of these set of registers _should_ vary depending on the selected mode of operation. This is the expected behavior according to the description of the registers and their reset values in the Technical Reference Manual for the SoCs. However, it is observed that the "reset-value" seen in practice do not match the description. To be precise, when the Controller is configured for Root-Complex mode of operation, the "reset-value" of the Root-Port configuration space reflect the "reset-value" corresponding to the Physical Function configuration space. This can be attributed to the fact that the "strap" settings play a role in "switching" the "reset-value" of the registers to match the expected values as determined by the selected mode of operation. Since the "strap" settings are sampled the moment the PCIe Controller is powered ON, the "reset-value" of the registers are setup at that point in time. As a result, if the "strap" settings are programmed at a later point in time, it _will not_ update the "reset-value" of the registers. This will cause the Physical Function configuration space to be seen when the Root-Port configuration space is accessed after programming the PCIe Controller for Root-Complex mode of operation. Fix this by powering off the PCIe Controller before programming the "strap" settings and powering it on after that. This will ensure that the "strap" settings that have been sampled convey the intended mode of operation, thereby resulting in the "reset-value" of the registers being accurate. Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> --- Hello, This patch is based on commit be48bcf004f9 Merge tag 'for-6.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux of Mainline Linux. v1 of this patch is at: https://lore.kernel.org/r/20250716102851.121742-1-s-vadapalli@ti.com/ Changes since v1: - Rebased patch on latest Mainline Linux. Regards, Siddharth. drivers/pci/controller/cadence/pci-j721e.c | 82 ++++++++++++++-------- 1 file changed, 53 insertions(+), 29 deletions(-) diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 6c93f39d0288..d5e7cb7277dc 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pci.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> @@ -173,10 +174,9 @@ static const struct cdns_pcie_ops j721e_pcie_ops = { .link_up = j721e_pcie_link_up, }; -static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon, - unsigned int offset) +static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct device *dev, + struct regmap *syscon, unsigned int offset) { - struct device *dev = pcie->cdns_pcie->dev; u32 mask = J721E_MODE_RC; u32 mode = pcie->mode; u32 val = 0; @@ -193,9 +193,9 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon, } static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie, + struct device *dev, struct regmap *syscon, unsigned int offset) { - struct device *dev = pcie->cdns_pcie->dev; struct device_node *np = dev->of_node; int link_speed; u32 val = 0; @@ -214,9 +214,9 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie, } static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie, + struct device *dev, struct regmap *syscon, unsigned int offset) { - struct device *dev = pcie->cdns_pcie->dev; u32 lanes = pcie->num_lanes; u32 mask = BIT(8); u32 val = 0; @@ -234,9 +234,9 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie, } static int j721e_enable_acspcie_refclk(struct j721e_pcie *pcie, + struct device *dev, struct regmap *syscon) { - struct device *dev = pcie->cdns_pcie->dev; struct device_node *node = dev->of_node; u32 mask = ACSPCIE_PAD_DISABLE_MASK; struct of_phandle_args args; @@ -263,9 +263,8 @@ static int j721e_enable_acspcie_refclk(struct j721e_pcie *pcie, return 0; } -static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) +static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie, struct device *dev) { - struct device *dev = pcie->cdns_pcie->dev; struct device_node *node = dev->of_node; struct of_phandle_args args; unsigned int offset = 0; @@ -284,19 +283,19 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) if (!ret) offset = args.args[0]; - ret = j721e_pcie_set_mode(pcie, syscon, offset); + ret = j721e_pcie_set_mode(pcie, dev, syscon, offset); if (ret < 0) { dev_err(dev, "Failed to set pci mode\n"); return ret; } - ret = j721e_pcie_set_link_speed(pcie, syscon, offset); + ret = j721e_pcie_set_link_speed(pcie, dev, syscon, offset); if (ret < 0) { dev_err(dev, "Failed to set link speed\n"); return ret; } - ret = j721e_pcie_set_lane_count(pcie, syscon, offset); + ret = j721e_pcie_set_lane_count(pcie, dev, syscon, offset); if (ret < 0) { dev_err(dev, "Failed to set num-lanes\n"); return ret; @@ -308,7 +307,7 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) if (!syscon) return 0; - return j721e_enable_acspcie_refclk(pcie, syscon); + return j721e_enable_acspcie_refclk(pcie, dev, syscon); } static int cdns_ti_pcie_config_read(struct pci_bus *bus, unsigned int devfn, @@ -469,6 +468,47 @@ static int j721e_pcie_probe(struct platform_device *pdev) if (!pcie) return -ENOMEM; + pcie->mode = mode; + + ret = of_property_read_u32(node, "num-lanes", &num_lanes); + if (ret || num_lanes > data->max_lanes) { + dev_warn(dev, "num-lanes property not provided or invalid, setting num-lanes to 1\n"); + num_lanes = 1; + } + + pcie->num_lanes = num_lanes; + pcie->max_lanes = data->max_lanes; + + /* + * The PCIe Controller's registers have different "reset-values" depending + * on the "strap" settings programmed into the Controller's Glue Layer. + * This is because the same set of registers are used for representing the + * Physical Function configuration space in Endpoint mode and for + * representing the Root-Port configuration space in Root-Complex mode. + * + * The registers latch onto a "reset-value" based on the "strap" settings + * sampled after the Controller is powered on. Therefore, for the + * "reset-value" to be accurate, it is necessary to program the "strap" + * settings when the Controller is powered off, and power on the Controller + * after the "strap" settings have been programmed. + * + * The "strap" settings are programmed by "j721e_pcie_ctrl_init()". + * Therefore, power off the Controller before invoking "j721e_pcie_ctrl_init()", + * program the "strap" settings, and then power on the Controller. This ensures + * that the reset values are accurate and reflect the "strap" settings. + */ + dev_pm_domain_detach(dev, true); + + ret = j721e_pcie_ctrl_init(pcie, dev); + if (ret < 0) + return ret; + + ret = dev_pm_domain_attach(dev, true); + if (ret < 0) { + dev_err(dev, "failed to power on device\n"); + return ret; + } + switch (mode) { case PCI_MODE_RC: if (!IS_ENABLED(CONFIG_PCI_J721E_HOST)) @@ -510,7 +550,6 @@ static int j721e_pcie_probe(struct platform_device *pdev) return 0; } - pcie->mode = mode; pcie->linkdown_irq_regfield = data->linkdown_irq_regfield; base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg"); @@ -523,15 +562,6 @@ static int j721e_pcie_probe(struct platform_device *pdev) return PTR_ERR(base); pcie->user_cfg_base = base; - ret = of_property_read_u32(node, "num-lanes", &num_lanes); - if (ret || num_lanes > data->max_lanes) { - dev_warn(dev, "num-lanes property not provided or invalid, setting num-lanes to 1\n"); - num_lanes = 1; - } - - pcie->num_lanes = num_lanes; - pcie->max_lanes = data->max_lanes; - if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48))) return -EINVAL; @@ -547,12 +577,6 @@ static int j721e_pcie_probe(struct platform_device *pdev) goto err_get_sync; } - ret = j721e_pcie_ctrl_init(pcie); - if (ret < 0) { - dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n"); - goto err_get_sync; - } - ret = devm_request_irq(dev, irq, j721e_pcie_link_irq_handler, 0, "j721e-pcie-link-down-irq", pcie); if (ret < 0) { @@ -680,7 +704,7 @@ static int j721e_pcie_resume_noirq(struct device *dev) struct cdns_pcie *cdns_pcie = pcie->cdns_pcie; int ret; - ret = j721e_pcie_ctrl_init(pcie); + ret = j721e_pcie_ctrl_init(pcie, dev); if (ret < 0) return ret; -- 2.43.0

3 weeks, 3 days

2
2
0 0

[PATCH linux-stable 6.6] Bluetooth: hci_conn: avoid queue when deleting hci connection

by xu.xin16＠zte.com.cn

From: Chen Junlin <chen.junlin(a)zte.com.cn> Although the upstream commit 2b0f2fc9ed62 ("Bluetooth: hci_conn: Use disable_delayed_work_sync") has fixed the issue CVE-2024-56591, that patch depends on the implementaion of disable/enable_work() of workqueue [1], which are merged into 6.9/6.10 and so on. But for branch linux-6.6, there's no these feature of workqueue. To solve CVE-2024-56591 without backport too many feature patches about workqueue, we can set a new flag HCI_CONN_DELETE when hci_conn_dell() is called, and the subsequent queuing of work will be ignored. [1] https://lore.kernel.org/all/20240216180559.208276-1-tj@kernel.org/ Signed-off-by: Chen Junlin <chen.junlin(a)zte.com.cn> Signed-off-by: xu xin <xu.xin16(a)zte.com.cn> --- include/net/bluetooth/hci_core.h | 8 +++++++- net/bluetooth/hci_conn.c | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 4f067599e6e9..9a3ec55079a1 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -954,6 +954,7 @@ enum { HCI_CONN_BIG_SYNC_FAILED, HCI_CONN_PA_SYNC, HCI_CONN_PA_SYNC_FAILED, + HCI_CONN_DELETE, }; static inline bool hci_conn_ssp_enabled(struct hci_conn *conn) @@ -1575,7 +1576,12 @@ static inline void hci_conn_drop(struct hci_conn *conn) } cancel_delayed_work(&conn->disc_work); - queue_delayed_work(conn->hdev->workqueue, + /* + * When HCI_CONN_DELETE is set, the conn is goint to be freed. + * Don't queue the work to avoid noisy WARNing about refcnt < 0. + */ + if (!test_bit(HCI_CONN_DELETE, &conn->flags)) + queue_delayed_work(conn->hdev->workqueue, &conn->disc_work, timeo); } } diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 549ee9e87d63..67a6513bb01c 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -1112,6 +1112,7 @@ void hci_conn_del(struct hci_conn *conn) hci_conn_unlink(conn); + set_bit(HCI_CONN_DELETE, &conn->flags); cancel_delayed_work_sync(&conn->disc_work); cancel_delayed_work_sync(&conn->auto_accept_work); cancel_delayed_work_sync(&conn->idle_work); -- 2.15.2

3 weeks, 3 days

2
2
0 0

[merged mm-hotfixes-stable] mm-mremap-fix-warn-with-uffd-that-has-remap-events-disabled.patch removed from -mm tree

by Andrew Morton

The quilt patch titled Subject: mm/mremap: fix WARN with uffd that has remap events disabled has been removed from the -mm tree. Its filename was mm-mremap-fix-warn-with-uffd-that-has-remap-events-disabled.patch This patch was dropped because it was merged into the mm-hotfixes-stable branch of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm ------------------------------------------------------ From: David Hildenbrand <david(a)redhat.com> Subject: mm/mremap: fix WARN with uffd that has remap events disabled Date: Mon, 18 Aug 2025 19:53:58 +0200 Registering userfaultd on a VMA that spans at least one PMD and then mremap()'ing that VMA can trigger a WARN when recovering from a failed page table move due to a page table allocation error. The code ends up doing the right thing (recurse, avoiding moving actual page tables), but triggering that WARN is unpleasant: WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Modules linked in: CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline] RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline] RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Code: ... RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645 RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007 RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000 FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0 Call Trace: <TASK> copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f00d0b8ebe9 Code: ... RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019 RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9 RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000 RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 </TASK> The underlying issue is that we recurse during the original page table move, but not during the recovery move. Fix it by checking for both VMAs and performing the check before the pmd_none() sanity check. Add a new helper where we perform+document that check for the PMD and PUD level. Thanks to Harry for bisecting. Link: https://lkml.kernel.org/r/20250818175358.1184757-1-david@redhat.com Fixes: 0cef0bb836e3 ("mm: clear uffd-wp PTE/PMD state on mremap()") Signed-off-by: David Hildenbrand <david(a)redhat.com> Reported-by: syzbot+4d9a13f0797c46a29e42(a)syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/689bb893.050a0220.7f033.013a.GAE@google.com Tested-by: Harry Yoo <harry.yoo(a)oracle.com> Cc: "Liam R. Howlett" <Liam.Howlett(a)oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: Jann Horn <jannh(a)google.com> Cc: Pedro Falcato <pfalcato(a)suse.de> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/mremap.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) --- a/mm/mremap.c~mm-mremap-fix-warn-with-uffd-that-has-remap-events-disabled +++ a/mm/mremap.c @@ -323,6 +323,25 @@ static inline bool arch_supports_page_ta } #endif +static inline bool uffd_supports_page_table_move(struct pagetable_move_control *pmc) +{ + /* + * If we are moving a VMA that has uffd-wp registered but with + * remap events disabled (new VMA will not be registered with uffd), we + * need to ensure that the uffd-wp state is cleared from all pgtables. + * This means recursing into lower page tables in move_page_tables(). + * + * We might get called with VMAs reversed when recovering from a + * failed page table move. In that case, the + * "old"-but-actually-"originally new" VMA during recovery will not have + * a uffd context. Recursing into lower page tables during the original + * move but not during the recovery move will cause trouble, because we + * run into already-existing page tables. So check both VMAs. + */ + return !vma_has_uffd_without_event_remap(pmc->old) && + !vma_has_uffd_without_event_remap(pmc->new); +} + #ifdef CONFIG_HAVE_MOVE_PMD static bool move_normal_pmd(struct pagetable_move_control *pmc, pmd_t *old_pmd, pmd_t *new_pmd) @@ -335,6 +354,8 @@ static bool move_normal_pmd(struct paget if (!arch_supports_page_table_move()) return false; + if (!uffd_supports_page_table_move(pmc)) + return false; /* * The destination pmd shouldn't be established, free_pgtables() * should have released it. @@ -361,15 +382,6 @@ static bool move_normal_pmd(struct paget if (WARN_ON_ONCE(!pmd_none(*new_pmd))) return false; - /* If this pmd belongs to a uffd vma with remap events disabled, we need - * to ensure that the uffd-wp state is cleared from all pgtables. This - * means recursing into lower page tables in move_page_tables(), and we - * can reuse the existing code if we simply treat the entry as "not - * moved". - */ - if (vma_has_uffd_without_event_remap(vma)) - return false; - /* * We don't have to worry about the ordering of src and dst * ptlocks because exclusive mmap_lock prevents deadlock. @@ -418,6 +430,8 @@ static bool move_normal_pud(struct paget if (!arch_supports_page_table_move()) return false; + if (!uffd_supports_page_table_move(pmc)) + return false; /* * The destination pud shouldn't be established, free_pgtables() * should have released it. @@ -425,15 +439,6 @@ static bool move_normal_pud(struct paget if (WARN_ON_ONCE(!pud_none(*new_pud))) return false; - /* If this pud belongs to a uffd vma with remap events disabled, we need - * to ensure that the uffd-wp state is cleared from all pgtables. This - * means recursing into lower page tables in move_page_tables(), and we - * can reuse the existing code if we simply treat the entry as "not - * moved". - */ - if (vma_has_uffd_without_event_remap(vma)) - return false; - /* * We don't have to worry about the ordering of src and dst * ptlocks because exclusive mmap_lock prevents deadlock. _ Patches currently in -mm which might be from david(a)redhat.com are mm-migrate-remove-migratepage_unmap.patch mm-migrate-remove-migratepage_unmap-fix.patch treewide-remove-migratepage_success.patch mm-huge_memory-move-more-common-code-into-insert_pmd.patch mm-huge_memory-move-more-common-code-into-insert_pud.patch mm-huge_memory-support-huge-zero-folio-in-vmf_insert_folio_pmd.patch fs-dax-use-vmf_insert_folio_pmd-to-insert-the-huge-zero-folio.patch mm-huge_memory-mark-pmd-mappings-of-the-huge-zero-folio-special.patch powerpc-ptdump-rename-struct-pgtable_level-to-struct-ptdump_pglevel.patch mm-rmap-convert-enum-rmap_level-to-enum-pgtable_level.patch mm-memory-convert-print_bad_pte-to-print_bad_page_map.patch mm-memory-factor-out-common-code-from-vm_normal_page_.patch mm-introduce-and-use-vm_normal_page_pud.patch mm-rename-vm_ops-find_special_page-to-vm_ops-find_normal_page.patch prctl-extend-pr_set_thp_disable-to-optionally-exclude-vm_hugepage.patch mm-huge_memory-convert-tva_flags-to-enum-tva_type.patch mm-huge_memory-respect-madv_collapse-with-pr_thp_disable_except_advised.patch

3 weeks, 3 days

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror