August 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] usb: dwc3: Remove WARN_ON for device endpoint command" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 45eae113dccaf8e502090ecf5b3d9e9b805add6f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082346-tux-happiness-8709@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 45eae113dccaf8e502090ecf5b3d9e9b805add6f Mon Sep 17 00:00:00 2001 From: Selvarasu Ganesan <selvarasu.g(a)samsung.com> Date: Fri, 8 Aug 2025 18:23:05 +0530 Subject: [PATCH] usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed and end transfer command sent as a part of the disconnect sequence and processing of USB_ENDPOINT_HALT feature request from the host timeout. This maybe an expected scenario since the controller is processing EP commands sent as a part of the previous connect. It maybe better to remove WARN_ON in all places where device endpoint commands are sent to avoid unnecessary kernel panic due to warn. Cc: stable <stable(a)kernel.org> Co-developed-by: Akash M <akash.m5(a)samsung.com> Signed-off-by: Akash M <akash.m5(a)samsung.com> Signed-off-by: Selvarasu Ganesan <selvarasu.g(a)samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 666ac432f52d..b4229aa13f37 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -288,7 +288,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8, DWC3_TRBCTL_CONTROL_SETUP, false); ret = dwc3_ep0_start_trans(dep); - WARN_ON(ret < 0); + if (ret < 0) + dev_err(dwc->dev, "ep0 out start transfer failed: %d\n", ret); + for (i = 2; i < DWC3_ENDPOINTS_NUM; i++) { struct dwc3_ep *dwc3_ep; @@ -1061,7 +1063,9 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = dwc3_ep0_start_trans(dep); } - WARN_ON(ret < 0); + if (ret < 0) + dev_err(dwc->dev, + "ep0 data phase start transfer failed: %d\n", ret); } static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) @@ -1078,7 +1082,12 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) { - WARN_ON(dwc3_ep0_start_control_status(dep)); + int ret; + + ret = dwc3_ep0_start_control_status(dep); + if (ret) + dev_err(dwc->dev, + "ep0 status phase start transfer failed: %d\n", ret); } static void dwc3_ep0_do_control_status(struct dwc3 *dwc, @@ -1121,7 +1130,10 @@ void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); memset(&params, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params); - WARN_ON_ONCE(ret); + if (ret) + dev_err_ratelimited(dwc->dev, + "ep0 data phase end transfer failed: %d\n", ret); + dep->resource_index = 0; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 68fa2813e5f4..554f997eb8c4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1772,7 +1772,11 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int dep->flags |= DWC3_EP_DELAY_STOP; return 0; } - WARN_ON_ONCE(ret); + + if (ret) + dev_err_ratelimited(dep->dwc->dev, + "end transfer failed: %d\n", ret); + dep->resource_index = 0; if (!interrupt) @@ -4048,7 +4052,9 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) dep->flags &= ~DWC3_EP_STALL; ret = dwc3_send_clear_stall_ep_cmd(dep); - WARN_ON_ONCE(ret); + if (ret) + dev_err_ratelimited(dwc->dev, + "failed to clear STALL on %s\n", dep->name); } }

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] usb: xhci: Fix slot_id resource race conflict" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 2eb03376151bb8585caa23ed2673583107bb5193 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082306-plop-swampland-0f61@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 2eb03376151bb8585caa23ed2673583107bb5193 Mon Sep 17 00:00:00 2001 From: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Date: Tue, 19 Aug 2025 15:58:43 +0300 Subject: [PATCH] usb: xhci: Fix slot_id resource race conflict xHC controller may immediately reuse a slot_id after it's disabled, giving it to a new enumerating device before the xhci driver freed all resources related to the disabled device. In such a scenario, device-A with slot_id equal to 1 is disconnecting while device-B is enumerating, device-B will fail to enumerate in the follow sequence. 1.[device-A] send disable slot command 2.[device-B] send enable slot command 3.[device-A] disable slot command completed and wakeup waiting thread 4.[device-B] enable slot command completed with slot_id equal to 1 and wakeup waiting thread 5.[device-B] driver checks that slot_id is still in use (by device-A) in xhci_alloc_virt_device, and fail to enumerate due to this conflict 6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context when disable slot command completes successfully. Simultaneously, adjust function xhci_free_virt_device to accurately handle device release. [minor smatch warning and commit message fix -Mathias] Cc: stable(a)vger.kernel.org Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend") Signed-off-by: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20250819125844.2042452-2-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 92bb84f8132a..b3a59ce1b3f4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -704,8 +704,7 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, if (!xhci->devs[i]) continue; - retval = xhci_disable_slot(xhci, i); - xhci_free_virt_device(xhci, i); + retval = xhci_disable_and_free_slot(xhci, i); if (retval) xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n", i, retval); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 07289333a1e8..81eaad87a3d9 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -865,21 +865,20 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, * will be manipulated by the configure endpoint, allocate device, or update * hub functions while this function is removing the TT entries from the list. */ -void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) +void xhci_free_virt_device(struct xhci_hcd *xhci, struct xhci_virt_device *dev, + int slot_id) { - struct xhci_virt_device *dev; int i; int old_active_eps = 0; /* Slot ID 0 is reserved */ - if (slot_id == 0 || !xhci->devs[slot_id]) + if (slot_id == 0 || !dev) return; - dev = xhci->devs[slot_id]; - - xhci->dcbaa->dev_context_ptrs[slot_id] = 0; - if (!dev) - return; + /* If device ctx array still points to _this_ device, clear it */ + if (dev->out_ctx && + xhci->dcbaa->dev_context_ptrs[slot_id] == cpu_to_le64(dev->out_ctx->dma)) + xhci->dcbaa->dev_context_ptrs[slot_id] = 0; trace_xhci_free_virt_device(dev); @@ -920,8 +919,9 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) dev->udev->slot_id = 0; if (dev->rhub_port && dev->rhub_port->slot_id == slot_id) dev->rhub_port->slot_id = 0; - kfree(xhci->devs[slot_id]); - xhci->devs[slot_id] = NULL; + if (xhci->devs[slot_id] == dev) + xhci->devs[slot_id] = NULL; + kfree(dev); } /* @@ -962,7 +962,7 @@ static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_i out: /* we are now at a leaf device */ xhci_debugfs_remove_slot(xhci, slot_id); - xhci_free_virt_device(xhci, slot_id); + xhci_free_virt_device(xhci, vdev, slot_id); } int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ecd757d482c5..4f8f5aab109d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1592,7 +1592,8 @@ static void xhci_handle_cmd_enable_slot(int slot_id, struct xhci_command *comman command->slot_id = 0; } -static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) +static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id, + u32 cmd_comp_code) { struct xhci_virt_device *virt_dev; struct xhci_slot_ctx *slot_ctx; @@ -1607,6 +1608,10 @@ static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) /* Delete default control endpoint resources */ xhci_free_device_endpoint_resources(xhci, virt_dev, true); + if (cmd_comp_code == COMP_SUCCESS) { + xhci->dcbaa->dev_context_ptrs[slot_id] = 0; + xhci->devs[slot_id] = NULL; + } } static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id) @@ -1856,7 +1861,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_enable_slot(slot_id, cmd, cmd_comp_code); break; case TRB_DISABLE_SLOT: - xhci_handle_cmd_disable_slot(xhci, slot_id); + xhci_handle_cmd_disable_slot(xhci, slot_id, cmd_comp_code); break; case TRB_CONFIG_EP: if (!cmd->completion) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 47151ca527bf..0e03691f03bf 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3932,8 +3932,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, * Obtaining a new device slot to inform the xHCI host that * the USB device has been reset. */ - ret = xhci_disable_slot(xhci, udev->slot_id); - xhci_free_virt_device(xhci, udev->slot_id); + ret = xhci_disable_and_free_slot(xhci, udev->slot_id); if (!ret) { ret = xhci_alloc_dev(hcd, udev); if (ret == 1) @@ -4090,7 +4089,7 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_disable_slot(xhci, udev->slot_id); spin_lock_irqsave(&xhci->lock, flags); - xhci_free_virt_device(xhci, udev->slot_id); + xhci_free_virt_device(xhci, virt_dev, udev->slot_id); spin_unlock_irqrestore(&xhci->lock, flags); } @@ -4139,6 +4138,16 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) return 0; } +int xhci_disable_and_free_slot(struct xhci_hcd *xhci, u32 slot_id) +{ + struct xhci_virt_device *vdev = xhci->devs[slot_id]; + int ret; + + ret = xhci_disable_slot(xhci, slot_id); + xhci_free_virt_device(xhci, vdev, slot_id); + return ret; +} + /* * Checks if we have enough host controller resources for the default control * endpoint. @@ -4245,8 +4254,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) return 1; disable_slot: - xhci_disable_slot(xhci, udev->slot_id); - xhci_free_virt_device(xhci, udev->slot_id); + xhci_disable_and_free_slot(xhci, udev->slot_id); return 0; } @@ -4382,8 +4390,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, dev_warn(&udev->dev, "Device not responding to setup %s.\n", act); mutex_unlock(&xhci->mutex); - ret = xhci_disable_slot(xhci, udev->slot_id); - xhci_free_virt_device(xhci, udev->slot_id); + ret = xhci_disable_and_free_slot(xhci, udev->slot_id); if (!ret) { if (xhci_alloc_dev(hcd, udev) == 1) xhci_setup_addressable_virt_dev(xhci, udev); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a20f4e7cd43a..85d5b964bf1e 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1791,7 +1791,7 @@ void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *), /* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); -void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); +void xhci_free_virt_device(struct xhci_hcd *xhci, struct xhci_virt_device *dev, int slot_id); int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, @@ -1888,6 +1888,7 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id); +int xhci_disable_and_free_slot(struct xhci_hcd *xhci, u32 slot_id); int xhci_ext_cap_init(struct xhci_hcd *xhci); int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 340be332e420ed37d15d4169a1b4174e912ad6cb # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082238-bullring-fantasy-07b7@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 340be332e420ed37d15d4169a1b4174e912ad6cb Mon Sep 17 00:00:00 2001 From: Victor Shih <victor.shih(a)genesyslogic.com.tw> Date: Thu, 31 Jul 2025 14:57:52 +0800 Subject: [PATCH] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER Due to a flaw in the hardware design, the GL9763e replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9763e PCI config. Therefore, the replay timer timeout must be masked. Signed-off-by: Victor Shih <victor.shih(a)genesyslogic.com.tw> Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support") Cc: stable(a)vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Link: https://lore.kernel.org/r/20250731065752.450231-4-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 436f0460222f..3a1de477e9af 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -1782,6 +1782,9 @@ static void gl9763e_hw_setting(struct sdhci_pci_slot *slot) value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5); pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value); + /* mask the replay timer timeout of AER */ + sdhci_gli_mask_replay_timer_timeout(pdev); + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); value &= ~GLI_9763E_VHS_REV; value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);

1 week, 4 days

2
3
0 0

FAILED: patch "[PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082301-broiling-rendering-4758@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Mon, 21 Jul 2025 18:04:04 -0500 Subject: [PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace using stack-allocated buffers with a DMA-safe buffer for use with spi_read(). This allows the driver to be safely used with DMA-enabled SPI controllers. The buffer array is also converted to a struct with a union to make the usage of the memory in the buffer more clear and ensure proper alignment. Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Reviewed-by: Nuno Sá <nuno.sa(a)analog.com> Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index cae8e84821d7..205939680fd4 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/spi/spi.h> +#include <linux/types.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> @@ -121,8 +122,15 @@ struct maxim_thermocouple_data { struct spi_device *spi; const struct maxim_thermocouple_chip *chip; char tc_type; - - u8 buffer[16] __aligned(IIO_DMA_MINALIGN); + /* Buffer for reading up to 2 hardware channels. */ + struct { + union { + __be16 raw16; + __be32 raw32; + __be16 raw[2]; + }; + aligned_s64 timestamp; + } buffer __aligned(IIO_DMA_MINALIGN); }; static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, @@ -130,18 +138,16 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, { unsigned int storage_bytes = data->chip->read_size; unsigned int shift = chan->scan_type.shift + (chan->address * 8); - __be16 buf16; - __be32 buf32; int ret; switch (storage_bytes) { case 2: - ret = spi_read(data->spi, (void *)&buf16, storage_bytes); - *val = be16_to_cpu(buf16); + ret = spi_read(data->spi, &data->buffer.raw16, storage_bytes); + *val = be16_to_cpu(data->buffer.raw16); break; case 4: - ret = spi_read(data->spi, (void *)&buf32, storage_bytes); - *val = be32_to_cpu(buf32); + ret = spi_read(data->spi, &data->buffer.raw32, storage_bytes); + *val = be32_to_cpu(data->buffer.raw32); break; default: ret = -EINVAL; @@ -166,9 +172,9 @@ static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private) struct maxim_thermocouple_data *data = iio_priv(indio_dev); int ret; - ret = spi_read(data->spi, data->buffer, data->chip->read_size); + ret = spi_read(data->spi, data->buffer.raw, data->chip->read_size); if (!ret) { - iio_push_to_buffers_with_ts(indio_dev, data->buffer, + iio_push_to_buffers_with_ts(indio_dev, &data->buffer, sizeof(data->buffer), iio_get_time_ns(indio_dev)); }

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082301-nickname-uncommon-49ac@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Mon, 21 Jul 2025 18:04:04 -0500 Subject: [PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace using stack-allocated buffers with a DMA-safe buffer for use with spi_read(). This allows the driver to be safely used with DMA-enabled SPI controllers. The buffer array is also converted to a struct with a union to make the usage of the memory in the buffer more clear and ensure proper alignment. Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Reviewed-by: Nuno Sá <nuno.sa(a)analog.com> Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index cae8e84821d7..205939680fd4 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/spi/spi.h> +#include <linux/types.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> @@ -121,8 +122,15 @@ struct maxim_thermocouple_data { struct spi_device *spi; const struct maxim_thermocouple_chip *chip; char tc_type; - - u8 buffer[16] __aligned(IIO_DMA_MINALIGN); + /* Buffer for reading up to 2 hardware channels. */ + struct { + union { + __be16 raw16; + __be32 raw32; + __be16 raw[2]; + }; + aligned_s64 timestamp; + } buffer __aligned(IIO_DMA_MINALIGN); }; static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, @@ -130,18 +138,16 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, { unsigned int storage_bytes = data->chip->read_size; unsigned int shift = chan->scan_type.shift + (chan->address * 8); - __be16 buf16; - __be32 buf32; int ret; switch (storage_bytes) { case 2: - ret = spi_read(data->spi, (void *)&buf16, storage_bytes); - *val = be16_to_cpu(buf16); + ret = spi_read(data->spi, &data->buffer.raw16, storage_bytes); + *val = be16_to_cpu(data->buffer.raw16); break; case 4: - ret = spi_read(data->spi, (void *)&buf32, storage_bytes); - *val = be32_to_cpu(buf32); + ret = spi_read(data->spi, &data->buffer.raw32, storage_bytes); + *val = be32_to_cpu(data->buffer.raw32); break; default: ret = -EINVAL; @@ -166,9 +172,9 @@ static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private) struct maxim_thermocouple_data *data = iio_priv(indio_dev); int ret; - ret = spi_read(data->spi, data->buffer, data->chip->read_size); + ret = spi_read(data->spi, data->buffer.raw, data->chip->read_size); if (!ret) { - iio_push_to_buffers_with_ts(indio_dev, data->buffer, + iio_push_to_buffers_with_ts(indio_dev, &data->buffer, sizeof(data->buffer), iio_get_time_ns(indio_dev)); }

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082300-defense-dormitory-d649@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Mon, 21 Jul 2025 18:04:04 -0500 Subject: [PATCH] iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace using stack-allocated buffers with a DMA-safe buffer for use with spi_read(). This allows the driver to be safely used with DMA-enabled SPI controllers. The buffer array is also converted to a struct with a union to make the usage of the memory in the buffer more clear and ensure proper alignment. Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Reviewed-by: Nuno Sá <nuno.sa(a)analog.com> Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index cae8e84821d7..205939680fd4 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/spi/spi.h> +#include <linux/types.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> @@ -121,8 +122,15 @@ struct maxim_thermocouple_data { struct spi_device *spi; const struct maxim_thermocouple_chip *chip; char tc_type; - - u8 buffer[16] __aligned(IIO_DMA_MINALIGN); + /* Buffer for reading up to 2 hardware channels. */ + struct { + union { + __be16 raw16; + __be32 raw32; + __be16 raw[2]; + }; + aligned_s64 timestamp; + } buffer __aligned(IIO_DMA_MINALIGN); }; static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, @@ -130,18 +138,16 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, { unsigned int storage_bytes = data->chip->read_size; unsigned int shift = chan->scan_type.shift + (chan->address * 8); - __be16 buf16; - __be32 buf32; int ret; switch (storage_bytes) { case 2: - ret = spi_read(data->spi, (void *)&buf16, storage_bytes); - *val = be16_to_cpu(buf16); + ret = spi_read(data->spi, &data->buffer.raw16, storage_bytes); + *val = be16_to_cpu(data->buffer.raw16); break; case 4: - ret = spi_read(data->spi, (void *)&buf32, storage_bytes); - *val = be32_to_cpu(buf32); + ret = spi_read(data->spi, &data->buffer.raw32, storage_bytes); + *val = be32_to_cpu(data->buffer.raw32); break; default: ret = -EINVAL; @@ -166,9 +172,9 @@ static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private) struct maxim_thermocouple_data *data = iio_priv(indio_dev); int ret; - ret = spi_read(data->spi, data->buffer, data->chip->read_size); + ret = spi_read(data->spi, data->buffer.raw, data->chip->read_size); if (!ret) { - iio_push_to_buffers_with_ts(indio_dev, data->buffer, + iio_push_to_buffers_with_ts(indio_dev, &data->buffer, sizeof(data->buffer), iio_get_time_ns(indio_dev)); }

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] tracing: Limit access to parser->buffer when trace_get_user" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 6a909ea83f226803ea0e718f6e88613df9234d58 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082332-cusp-headstone-2927@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6a909ea83f226803ea0e718f6e88613df9234d58 Mon Sep 17 00:00:00 2001 From: Pu Lehui <pulehui(a)huawei.com> Date: Wed, 13 Aug 2025 04:02:32 +0000 Subject: [PATCH] tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com Fixes: 8c9af478c06b ("ftrace: Handle commands when closing set_ftrace_filter file") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4283ed4e8f59..8d8935ed416d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1816,7 +1816,7 @@ int trace_get_user(struct trace_parser *parser, const char __user *ubuf, ret = get_user(ch, ubuf++); if (ret) - return ret; + goto fail; read++; cnt--; @@ -1830,7 +1830,7 @@ int trace_get_user(struct trace_parser *parser, const char __user *ubuf, while (cnt && isspace(ch)) { ret = get_user(ch, ubuf++); if (ret) - return ret; + goto fail; read++; cnt--; } @@ -1848,12 +1848,14 @@ int trace_get_user(struct trace_parser *parser, const char __user *ubuf, while (cnt && !isspace(ch) && ch) { if (parser->idx < parser->size - 1) parser->buffer[parser->idx++] = ch; - else - return -EINVAL; + else { + ret = -EINVAL; + goto fail; + } ret = get_user(ch, ubuf++); if (ret) - return ret; + goto fail; read++; cnt--; } @@ -1868,11 +1870,15 @@ int trace_get_user(struct trace_parser *parser, const char __user *ubuf, /* Make sure the parsed string always terminates with '\0'. */ parser->buffer[parser->idx] = 0; } else { - return -EINVAL; + ret = -EINVAL; + goto fail; } *ppos += read; return read; +fail: + trace_parser_fail(parser); + return ret; } /* TODO add a seq_buf_to_buffer() */ diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 1dbf1d3cf2f1..be6654899cae 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -1292,6 +1292,7 @@ bool ftrace_event_is_function(struct trace_event_call *call); */ struct trace_parser { bool cont; + bool fail; char *buffer; unsigned idx; unsigned size; @@ -1299,7 +1300,7 @@ struct trace_parser { static inline bool trace_parser_loaded(struct trace_parser *parser) { - return (parser->idx != 0); + return !parser->fail && parser->idx != 0; } static inline bool trace_parser_cont(struct trace_parser *parser) @@ -1313,6 +1314,11 @@ static inline void trace_parser_clear(struct trace_parser *parser) parser->idx = 0; } +static inline void trace_parser_fail(struct trace_parser *parser) +{ + parser->fail = true; +} + extern int trace_parser_get_init(struct trace_parser *parser, int size); extern void trace_parser_put(struct trace_parser *parser); extern int trace_get_user(struct trace_parser *parser, const char __user *ubuf,

1 week, 4 days

1
0
0 0

FAILED: patch "[PATCH] mptcp: disable add_addr retransmission when timeout is 0" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x f5ce0714623cffd00bf2a83e890d09c609b7f50a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082242-enrage-armoire-a4f8@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f5ce0714623cffd00bf2a83e890d09c609b7f50a Mon Sep 17 00:00:00 2001 From: Geliang Tang <geliang(a)kernel.org> Date: Fri, 15 Aug 2025 19:28:23 +0200 Subject: [PATCH] mptcp: disable add_addr retransmission when timeout is 0 When add_addr_timeout was set to 0, this caused the ADD_ADDR to be retransmitted immediately, which looks like a buggy behaviour. Instead, interpret 0 as "no retransmissions needed". The documentation is updated to explicitly state that setting the timeout to 0 disables retransmission. Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout") Cc: stable(a)vger.kernel.org Suggested-by: Matthieu Baerts <matttbe(a)kernel.org> Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index 5bfab01eff5a..1683c139821e 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -12,6 +12,8 @@ add_addr_timeout - INTEGER (seconds) resent to an MPTCP peer that has not acknowledged a previous ADD_ADDR message. + Do not retransmit if set to 0. + The default value matches TCP_RTO_MAX. This is a per-namespace sysctl. diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c index c5f6a53ce5f1..136a380602ca 100644 --- a/net/mptcp/pm.c +++ b/net/mptcp/pm.c @@ -274,6 +274,7 @@ static void mptcp_pm_add_timer(struct timer_list *timer) add_timer); struct mptcp_sock *msk = entry->sock; struct sock *sk = (struct sock *)msk; + unsigned int timeout; pr_debug("msk=%p\n", msk); @@ -291,6 +292,10 @@ static void mptcp_pm_add_timer(struct timer_list *timer) goto out; } + timeout = mptcp_get_add_addr_timeout(sock_net(sk)); + if (!timeout) + goto out; + spin_lock_bh(&msk->pm.lock); if (!mptcp_pm_should_add_signal_addr(msk)) { @@ -302,7 +307,7 @@ static void mptcp_pm_add_timer(struct timer_list *timer) if (entry->retrans_times < ADD_ADDR_RETRANS_MAX) sk_reset_timer(sk, timer, - jiffies + mptcp_get_add_addr_timeout(sock_net(sk))); + jiffies + timeout); spin_unlock_bh(&msk->pm.lock); @@ -344,6 +349,7 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk, struct mptcp_pm_add_entry *add_entry = NULL; struct sock *sk = (struct sock *)msk; struct net *net = sock_net(sk); + unsigned int timeout; lockdep_assert_held(&msk->pm.lock); @@ -368,8 +374,9 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk, timer_setup(&add_entry->add_timer, mptcp_pm_add_timer, 0); reset_timer: - sk_reset_timer(sk, &add_entry->add_timer, - jiffies + mptcp_get_add_addr_timeout(net)); + timeout = mptcp_get_add_addr_timeout(net); + if (timeout) + sk_reset_timer(sk, &add_entry->add_timer, jiffies + timeout); return true; }

1 week, 4 days

2
1
0 0

[PATCH v2] Revert "arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery"

by Josua Mayer

This reverts commit 8a1365c7bbc122bd843096f0008d259e7a8afc61. The commit in questions most notably breaks SD-Card on SolidRun LX2162A Clearfog by corrupting the pinmux in dynamic configuration area for non-i2c pins without pinmux node. It is further expected that it breaks SD Card-Detect, as well as CAN, DSPI and GPIOs on any board based on LX2160 SoC. Background: The LX2160 SoC is configured at power-on from RCW (Reset Configuration Word) typically located in the first 4k of boot media. This blob configures various clock rates and pin functions. The pinmux for i2c specifically is part of configuration words RCWSR12, RCWSR13 and RCWSR14 size 32 bit each. These values are accessible at read-only addresses 0x01e0012c following. For runtime (re-)configuration the SoC has a dynamic configuration area where alternative settings can be applied. The counterparts of RCWSR[12-14] can be overridden at 0x70010012c following. The commit in question used this area to switch i2c pins between i2c and gpio function at runtime using the pinctrl-single driver - which reads a 32-bit value, makes particular changes by bitmask and writes back the new value. SolidRun have observed that if the dynamic configuration is read first (before a write), it reads as zero regardless the initial values set by RCW. After the first write consecutive reads reflect the written value. Because multiple pins are configured from a single 32-bit value, this causes unintentional change of all bits (except those for i2c) being set to zero when the pinctrl driver applies the first configuration. See below a short list of which functions RCWSR12 alone controls: LX2162-CF RCWSR12: 0b0000100000000000 0000000000000110 IIC2_PMUX ||| ||| || | ||| |||XXX : I2C/GPIO/CD-WP IIC3_PMUX ||| ||| || | ||| XXX : I2C/GPIO/CAN/EVT IIC4_PMUX ||| ||| || | |||XXX||| : I2C/GPIO/CAN/EVT IIC5_PMUX ||| ||| || | XXX ||| : I2C/GPIO/SDHC-CLK IIC6_PMUX ||| ||| || |XXX||| ||| : I2C/GPIO/SDHC-CLK XSPI1_A_DATA74_PMUX ||| ||| XX X ||| ||| : XSPI/GPIO XSPI1_A_DATA30_PMUX ||| |||XXX|| | ||| ||| : XSPI/GPIO XSPI1_A_BASE_PMUX ||| XXX || | ||| ||| : XSPI/GPIO SDHC1_BASE_PMUX |||XXX||| || | ||| ||| : SDHC/GPIO/SPI SDHC1_DIR_PMUX XXX ||| || | ||| ||| : SDHC/GPIO/SPI RESERVED XX||| ||| || | ||| ||| : On LX2162A Clearfog the initial (ant intended) value is 0x08000006 - enabling card-detect on IIC2_PMUX and some LEDs on SDHC1_DIR_PMUX. Everything else is intentional zero (enabling I2C & XSPI). By reading zero from dynamic configuration area, the commit in question changes IIC2_PMUX to value 0 (I2C function), and SDHC1_DIR_PMUX to 0 (SDHC data direction function) - breaking card-detect and led gpios. This issue should affect any board based on LX2160 SoC that is using the same or earlier versions of NXP bootloader as SolidRun have tested, in particular: LSDK-21.08 and LS-5.15.71-2.2.0. Whether NXP added some extra initialisation in the bootloader on later releases was not investigated. However bootloader upgrade should not be necessary to run a newer Linux kernel. To work around this issue it is possible to explicitly define ALL pins controlled by any 32-bit value so that gradually after processing all pinctrl nodes the correct value is reached on all bits. This is a large task that should be done carefully on a per-board basis and not globally through the SoC dtsi. Therefore the commit in question is reverted. Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery") Cc: stable(a)vger.kernel.org Signed-off-by: Josua Mayer <josua(a)solid-run.com> --- Changes in v2: - changed to revert problematic commit, workaround is large effort - Link to v1: https://lore.kernel.org/r/f32c5525-3162-4acd-880c-99fc46d3a63d@solid-run.com --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 106 ------------------------- 1 file changed, 106 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c9541403bcd8..eb1b4e607e2b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -749,10 +749,6 @@ i2c0: i2c@2000000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c0_scl>; - pinctrl-1 = <&i2c0_scl_gpio>; - scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -765,10 +761,6 @@ i2c1: i2c@2010000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c1_scl>; - pinctrl-1 = <&i2c1_scl_gpio>; - scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -781,10 +773,6 @@ i2c2: i2c@2020000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c2_scl>; - pinctrl-1 = <&i2c2_scl_gpio>; - scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -797,10 +785,6 @@ i2c3: i2c@2030000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c3_scl>; - pinctrl-1 = <&i2c3_scl_gpio>; - scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -813,10 +797,6 @@ i2c4: i2c@2040000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c4_scl>; - pinctrl-1 = <&i2c4_scl_gpio>; - scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -829,10 +809,6 @@ i2c5: i2c@2050000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c5_scl>; - pinctrl-1 = <&i2c5_scl_gpio>; - scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -845,10 +821,6 @@ i2c6: i2c@2060000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c6_scl>; - pinctrl-1 = <&i2c6_scl_gpio>; - scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -861,10 +833,6 @@ i2c7: i2c@2070000 { clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c7_scl>; - pinctrl-1 = <&i2c7_scl_gpio>; - scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -1700,80 +1668,6 @@ pcs18: ethernet-phy@0 { }; }; - pinmux_i2crv: pinmux@70010012c { - compatible = "pinctrl-single"; - reg = <0x00000007 0x0010012c 0x0 0xc>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7>; - - i2c1_scl: i2c1-scl-pins { - pinctrl-single,bits = <0x0 0 0x7>; - }; - - i2c1_scl_gpio: i2c1-scl-gpio-pins { - pinctrl-single,bits = <0x0 0x1 0x7>; - }; - - i2c2_scl: i2c2-scl-pins { - pinctrl-single,bits = <0x0 0 (0x7 << 3)>; - }; - - i2c2_scl_gpio: i2c2-scl-gpio-pins { - pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>; - }; - - i2c3_scl: i2c3-scl-pins { - pinctrl-single,bits = <0x0 0 (0x7 << 6)>; - }; - - i2c3_scl_gpio: i2c3-scl-gpio-pins { - pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>; - }; - - i2c4_scl: i2c4-scl-pins { - pinctrl-single,bits = <0x0 0 (0x7 << 9)>; - }; - - i2c4_scl_gpio: i2c4-scl-gpio-pins { - pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>; - }; - - i2c5_scl: i2c5-scl-pins { - pinctrl-single,bits = <0x0 0 (0x7 << 12)>; - }; - - i2c5_scl_gpio: i2c5-scl-gpio-pins { - pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>; - }; - - i2c6_scl: i2c6-scl-pins { - pinctrl-single,bits = <0x4 0x2 0x7>; - }; - - i2c6_scl_gpio: i2c6-scl-gpio-pins { - pinctrl-single,bits = <0x4 0x1 0x7>; - }; - - i2c7_scl: i2c7-scl-pins { - pinctrl-single,bits = <0x4 0x2 0x7>; - }; - - i2c7_scl_gpio: i2c7-scl-gpio-pins { - pinctrl-single,bits = <0x4 0x1 0x7>; - }; - - i2c0_scl: i2c0-scl-pins { - pinctrl-single,bits = <0x8 0 (0x7 << 10)>; - }; - - i2c0_scl_gpio: i2c0-scl-gpio-pins { - pinctrl-single,bits = <0x8 (0x1 << 10) (0x7 << 10)>; - }; - }; - fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, --- base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 change-id: 20250710-lx2160-sd-cd-00bf38ae169e Best regards, -- Josua Mayer <josua(a)solid-run.com>

1 week, 4 days

2
3
0 0

FAILED: patch "[PATCH] mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x d2d7a96b29ea6ab093973a1a37d26126db70c79f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082207-defog-stunned-9396@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d2d7a96b29ea6ab093973a1a37d26126db70c79f Mon Sep 17 00:00:00 2001 From: Judith Mendez <jm(a)ti.com> Date: Wed, 20 Aug 2025 14:30:47 -0500 Subject: [PATCH] mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1 This adds SDHCI_AM654_QUIRK_DISABLE_HS400 quirk which shall be used to disable HS400 support. AM62P SR1.0 and SR1.1 do not support HS400 due to errata i2458 [0] so disable HS400 for these SoC revisions. [0] https://www.ti.com/lit/er/sprz574a/sprz574a.pdf Fixes: 37f28165518f ("arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC") Cc: stable(a)vger.kernel.org Signed-off-by: Judith Mendez <jm(a)ti.com> Reviewed-by: Andrew Davis <afd(a)ti.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Link: https://lore.kernel.org/r/20250820193047.4064142-1-jm@ti.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index e4fc345be7e5..17e62c61b6e6 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -156,6 +156,7 @@ struct sdhci_am654_data { #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0) #define SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA BIT(1) +#define SDHCI_AM654_QUIRK_DISABLE_HS400 BIT(2) }; struct window { @@ -765,6 +766,7 @@ static int sdhci_am654_init(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host); + struct device *dev = mmc_dev(host->mmc); u32 ctl_cfg_2 = 0; u32 mask; u32 val; @@ -820,6 +822,12 @@ static int sdhci_am654_init(struct sdhci_host *host) if (ret) goto err_cleanup_host; + if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_DISABLE_HS400 && + host->mmc->caps2 & (MMC_CAP2_HS400 | MMC_CAP2_HS400_ES)) { + dev_info(dev, "HS400 mode not supported on this silicon revision, disabling it\n"); + host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES); + } + ret = __sdhci_add_host(host); if (ret) goto err_cleanup_host; @@ -883,6 +891,12 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev, return 0; } +static const struct soc_device_attribute sdhci_am654_descope_hs400[] = { + { .family = "AM62PX", .revision = "SR1.0" }, + { .family = "AM62PX", .revision = "SR1.1" }, + { /* sentinel */ } +}; + static const struct of_device_id sdhci_am654_of_match[] = { { .compatible = "ti,am654-sdhci-5.1", @@ -970,6 +984,10 @@ static int sdhci_am654_probe(struct platform_device *pdev) if (ret) return dev_err_probe(dev, ret, "parsing dt failed\n"); + soc = soc_device_match(sdhci_am654_descope_hs400); + if (soc) + sdhci_am654->quirks |= SDHCI_AM654_QUIRK_DISABLE_HS400; + host->mmc_host_ops.start_signal_voltage_switch = sdhci_am654_start_signal_voltage_switch; host->mmc_host_ops.execute_tuning = sdhci_am654_execute_tuning;

1 week, 4 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025