March 2025 - Linux-stable-mirror

[PATCH v2 8/8] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies

by Johan Hovold

Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- .../qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 160c052db1ec..962fb050c55c 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8"; -- 2.48.1

3 months

1
0
0 0

[PATCH v2 7/8] arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts") Cc: stable(a)vger.kernel.org # 6.8 Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index ec594628304a..8f366bf61bbd 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -437,6 +437,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -458,6 +459,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

3 months

1
0
0 0

[PATCH v2 6/8] arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree") Cc: stable(a)vger.kernel.org # 6.11 Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index a3d53f2ba2c3..9d4ba9728355 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -290,6 +290,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l14b_3p0: ldo14 { @@ -304,8 +305,8 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; - }; regulators-1 { -- 2.48.1

3 months

1
0
0 0

[PATCH v2 5/8] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: stable(a)vger.kernel.org # 6.14 Cc: Jens Glathe <jens.glathe(a)oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..ab5addb33b7a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -633,6 +633,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -654,6 +655,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

3 months

1
0
0 0

[PATCH v2 4/8] arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Note that these supplies currently have no consumers described in mainline. Fixes: f5b788d0e8cd ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345") Cc: stable(a)vger.kernel.org # 6.13 Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis(a)gmail.com> Tested-by: Aleksandrs Vinarskis <alex.vinarskis(a)gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 86e87f03b0ec..90f588ed7d63 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -359,6 +359,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -380,6 +381,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { -- 2.48.1

3 months

1
0
0 0

[PATCH v2 3/8] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows") Cc: stable(a)vger.kernel.org # 6.14 Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index 5e3970b26e2f..f92bda2d34f2 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -507,6 +507,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -528,6 +529,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

3 months

1
0
0 0

[PATCH v2 2/8] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index eff0e73640bc..160c052db1ec 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -456,6 +456,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -477,6 +478,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { -- 2.48.1

3 months

1
0
0 0

[PATCH net 6/6] can: flexcan: disable transceiver during system PM

by Marc Kleine-Budde

From: Haibo Chen <haibo.chen(a)nxp.com> During system PM, if no wakeup requirement, disable transceiver to save power. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable(a)vger.kernel.org Reviewed-by: Frank Li <frank.li(a)nxp.com> Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com [mkl: add newlines] Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/flexcan/flexcan-core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index 3a71fd235722..b080740bcb10 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -2260,6 +2260,10 @@ static int __maybe_unused flexcan_suspend(struct device *device) flexcan_chip_interrupts_disable(dev); + err = flexcan_transceiver_disable(priv); + if (err) + return err; + err = pinctrl_pm_select_sleep_state(device); if (err) return err; @@ -2292,10 +2296,16 @@ static int __maybe_unused flexcan_resume(struct device *device) if (err) return err; - err = flexcan_chip_start(dev); + err = flexcan_transceiver_enable(priv); if (err) return err; + err = flexcan_chip_start(dev); + if (err) { + flexcan_transceiver_disable(priv); + return err; + } + flexcan_chip_interrupts_enable(dev); } -- 2.47.2

3 months

1
0
0 0

[PATCH net 5/6] can: flexcan: only change CAN state when link up in system PM

by Marc Kleine-Budde

From: Haibo Chen <haibo.chen(a)nxp.com> After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE. $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000 $ sudo systemctl suspend $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000 And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable(a)vger.kernel.org Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com Reported-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@peng… [mkl: add newlines] Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/flexcan/flexcan-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index ac1a860986df..3a71fd235722 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -2266,8 +2266,9 @@ static int __maybe_unused flexcan_suspend(struct device *device) } netif_stop_queue(dev); netif_device_detach(dev); + + priv->can.state = CAN_STATE_SLEEPING; } - priv->can.state = CAN_STATE_SLEEPING; return 0; } @@ -2278,7 +2279,6 @@ static int __maybe_unused flexcan_resume(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); @@ -2298,6 +2298,8 @@ static int __maybe_unused flexcan_resume(struct device *device) flexcan_chip_interrupts_enable(dev); } + + priv->can.state = CAN_STATE_ERROR_ACTIVE; } return 0; -- 2.47.2

3 months

1
0
0 0

[PATCH net 4/6] can: rcar_canfd: Fix page entries in the AFL list

by Marc Kleine-Budde

From: Biju Das <biju.das.jz(a)bp.renesas.com> There are a total of 96 AFL pages and each page has 16 entries with registers CFDGAFLIDr, CFDGAFLMr, CFDGAFLP0r, CFDGAFLP1r holding the rule entries (r = 0..15). Currently, RCANFD_GAFL* macros use a start variable to find AFL entries, which is incorrect as the testing on RZ/G3E shows ch1 and ch4 gets a start value of 0 and the register contents are overwritten. Fix this issue by using rule_entry corresponding to the channel to find the page entries in the AFL list. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> Tested-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Link: https://patch.msgid.link/20250307170330.173425-3-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/rcar/rcar_canfd.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index df1a5d0b37b2..aa3df0d05b85 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -787,22 +787,14 @@ static void rcar_canfd_configure_controller(struct rcar_canfd_global *gpriv) } static void rcar_canfd_configure_afl_rules(struct rcar_canfd_global *gpriv, - u32 ch) + u32 ch, u32 rule_entry) { - u32 cfg; - int offset, start, page, num_rules = RCANFD_CHANNEL_NUMRULES; + int offset, page, num_rules = RCANFD_CHANNEL_NUMRULES; + u32 rule_entry_index = rule_entry % 16; u32 ridx = ch + RCANFD_RFFIFO_IDX; - if (ch == 0) { - start = 0; /* Channel 0 always starts from 0th rule */ - } else { - /* Get number of Channel 0 rules and adjust */ - cfg = rcar_canfd_read(gpriv->base, RCANFD_GAFLCFG(ch)); - start = RCANFD_GAFLCFG_GETRNC(gpriv, 0, cfg); - } - /* Enable write access to entry */ - page = RCANFD_GAFL_PAGENUM(start); + page = RCANFD_GAFL_PAGENUM(rule_entry); rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLECTR, (RCANFD_GAFLECTR_AFLPN(gpriv, page) | RCANFD_GAFLECTR_AFLDAE)); @@ -818,13 +810,13 @@ static void rcar_canfd_configure_afl_rules(struct rcar_canfd_global *gpriv, offset = RCANFD_C_GAFL_OFFSET; /* Accept all IDs */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLID(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLID(offset, rule_entry_index), 0); /* IDE or RTR is not considered for matching */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLM(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLM(offset, rule_entry_index), 0); /* Any data length accepted */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLP0(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLP0(offset, rule_entry_index), 0); /* Place the msg in corresponding Rx FIFO entry */ - rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLP1(offset, start), + rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLP1(offset, rule_entry_index), RCANFD_GAFLP1_GAFLFDP(ridx)); /* Disable write access to page */ @@ -1851,6 +1843,7 @@ static int rcar_canfd_probe(struct platform_device *pdev) unsigned long channels_mask = 0; int err, ch_irq, g_irq; int g_err_irq, g_recc_irq; + u32 rule_entry = 0; bool fdmode = true; /* CAN FD only mode - default */ char name[9] = "channelX"; int i; @@ -2023,7 +2016,8 @@ static int rcar_canfd_probe(struct platform_device *pdev) rcar_canfd_configure_tx(gpriv, ch); /* Configure receive rules */ - rcar_canfd_configure_afl_rules(gpriv, ch); + rcar_canfd_configure_afl_rules(gpriv, ch, rule_entry); + rule_entry += RCANFD_CHANNEL_NUMRULES; } /* Configure common interrupts */ -- 2.47.2

3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025