March 2025 - Linux-stable-mirror

[PATCH v2 5/8] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: stable(a)vger.kernel.org # 6.14 Cc: Jens Glathe <jens.glathe(a)oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..ab5addb33b7a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -633,6 +633,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -654,6 +655,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

6 months

1
0
0 0

[PATCH v2 4/8] arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Note that these supplies currently have no consumers described in mainline. Fixes: f5b788d0e8cd ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345") Cc: stable(a)vger.kernel.org # 6.13 Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis(a)gmail.com> Tested-by: Aleksandrs Vinarskis <alex.vinarskis(a)gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 86e87f03b0ec..90f588ed7d63 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -359,6 +359,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -380,6 +381,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { -- 2.48.1

6 months

1
0
0 0

[PATCH v2 3/8] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows") Cc: stable(a)vger.kernel.org # 6.14 Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index 5e3970b26e2f..f92bda2d34f2 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -507,6 +507,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -528,6 +529,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

6 months

1
0
0 0

[PATCH v2 2/8] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index eff0e73640bc..160c052db1ec 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -456,6 +456,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -477,6 +478,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { -- 2.48.1

6 months

1
0
0 0

[PATCH net 6/6] can: flexcan: disable transceiver during system PM

by Marc Kleine-Budde

From: Haibo Chen <haibo.chen(a)nxp.com> During system PM, if no wakeup requirement, disable transceiver to save power. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable(a)vger.kernel.org Reviewed-by: Frank Li <frank.li(a)nxp.com> Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com [mkl: add newlines] Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/flexcan/flexcan-core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index 3a71fd235722..b080740bcb10 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -2260,6 +2260,10 @@ static int __maybe_unused flexcan_suspend(struct device *device) flexcan_chip_interrupts_disable(dev); + err = flexcan_transceiver_disable(priv); + if (err) + return err; + err = pinctrl_pm_select_sleep_state(device); if (err) return err; @@ -2292,10 +2296,16 @@ static int __maybe_unused flexcan_resume(struct device *device) if (err) return err; - err = flexcan_chip_start(dev); + err = flexcan_transceiver_enable(priv); if (err) return err; + err = flexcan_chip_start(dev); + if (err) { + flexcan_transceiver_disable(priv); + return err; + } + flexcan_chip_interrupts_enable(dev); } -- 2.47.2

6 months

1
0
0 0

[PATCH net 5/6] can: flexcan: only change CAN state when link up in system PM

by Marc Kleine-Budde

From: Haibo Chen <haibo.chen(a)nxp.com> After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE. $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000 $ sudo systemctl suspend $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000 And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable(a)vger.kernel.org Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com Reported-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@peng… [mkl: add newlines] Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/flexcan/flexcan-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index ac1a860986df..3a71fd235722 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -2266,8 +2266,9 @@ static int __maybe_unused flexcan_suspend(struct device *device) } netif_stop_queue(dev); netif_device_detach(dev); + + priv->can.state = CAN_STATE_SLEEPING; } - priv->can.state = CAN_STATE_SLEEPING; return 0; } @@ -2278,7 +2279,6 @@ static int __maybe_unused flexcan_resume(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); @@ -2298,6 +2298,8 @@ static int __maybe_unused flexcan_resume(struct device *device) flexcan_chip_interrupts_enable(dev); } + + priv->can.state = CAN_STATE_ERROR_ACTIVE; } return 0; -- 2.47.2

6 months

1
0
0 0

[PATCH net 4/6] can: rcar_canfd: Fix page entries in the AFL list

by Marc Kleine-Budde

From: Biju Das <biju.das.jz(a)bp.renesas.com> There are a total of 96 AFL pages and each page has 16 entries with registers CFDGAFLIDr, CFDGAFLMr, CFDGAFLP0r, CFDGAFLP1r holding the rule entries (r = 0..15). Currently, RCANFD_GAFL* macros use a start variable to find AFL entries, which is incorrect as the testing on RZ/G3E shows ch1 and ch4 gets a start value of 0 and the register contents are overwritten. Fix this issue by using rule_entry corresponding to the channel to find the page entries in the AFL list. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> Tested-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Link: https://patch.msgid.link/20250307170330.173425-3-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/rcar/rcar_canfd.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index df1a5d0b37b2..aa3df0d05b85 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -787,22 +787,14 @@ static void rcar_canfd_configure_controller(struct rcar_canfd_global *gpriv) } static void rcar_canfd_configure_afl_rules(struct rcar_canfd_global *gpriv, - u32 ch) + u32 ch, u32 rule_entry) { - u32 cfg; - int offset, start, page, num_rules = RCANFD_CHANNEL_NUMRULES; + int offset, page, num_rules = RCANFD_CHANNEL_NUMRULES; + u32 rule_entry_index = rule_entry % 16; u32 ridx = ch + RCANFD_RFFIFO_IDX; - if (ch == 0) { - start = 0; /* Channel 0 always starts from 0th rule */ - } else { - /* Get number of Channel 0 rules and adjust */ - cfg = rcar_canfd_read(gpriv->base, RCANFD_GAFLCFG(ch)); - start = RCANFD_GAFLCFG_GETRNC(gpriv, 0, cfg); - } - /* Enable write access to entry */ - page = RCANFD_GAFL_PAGENUM(start); + page = RCANFD_GAFL_PAGENUM(rule_entry); rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLECTR, (RCANFD_GAFLECTR_AFLPN(gpriv, page) | RCANFD_GAFLECTR_AFLDAE)); @@ -818,13 +810,13 @@ static void rcar_canfd_configure_afl_rules(struct rcar_canfd_global *gpriv, offset = RCANFD_C_GAFL_OFFSET; /* Accept all IDs */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLID(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLID(offset, rule_entry_index), 0); /* IDE or RTR is not considered for matching */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLM(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLM(offset, rule_entry_index), 0); /* Any data length accepted */ - rcar_canfd_write(gpriv->base, RCANFD_GAFLP0(offset, start), 0); + rcar_canfd_write(gpriv->base, RCANFD_GAFLP0(offset, rule_entry_index), 0); /* Place the msg in corresponding Rx FIFO entry */ - rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLP1(offset, start), + rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLP1(offset, rule_entry_index), RCANFD_GAFLP1_GAFLFDP(ridx)); /* Disable write access to page */ @@ -1851,6 +1843,7 @@ static int rcar_canfd_probe(struct platform_device *pdev) unsigned long channels_mask = 0; int err, ch_irq, g_irq; int g_err_irq, g_recc_irq; + u32 rule_entry = 0; bool fdmode = true; /* CAN FD only mode - default */ char name[9] = "channelX"; int i; @@ -2023,7 +2016,8 @@ static int rcar_canfd_probe(struct platform_device *pdev) rcar_canfd_configure_tx(gpriv, ch); /* Configure receive rules */ - rcar_canfd_configure_afl_rules(gpriv, ch); + rcar_canfd_configure_afl_rules(gpriv, ch, rule_entry); + rule_entry += RCANFD_CHANNEL_NUMRULES; } /* Configure common interrupts */ -- 2.47.2

6 months

1
0
0 0

[PATCH net 3/6] dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M

by Marc Kleine-Budde

From: Biju Das <biju.das.jz(a)bp.renesas.com> The Renesas R-Car V4M(R8A779H0) SoC, supports up to four channels. Fix the typo 5->4 in pattern properties. Fixes: ced52c6ed257 ("dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support") Cc: stable(a)vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Acked-by: "Rob Herring (Arm)" <robh(a)kernel.org> Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> Link: https://patch.msgid.link/20250307170330.173425-2-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- .../devicetree/bindings/net/can/renesas,rcar-canfd.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index 7c5ac5d2e880..f6884f6e59e7 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -170,7 +170,7 @@ allOf: const: renesas,r8a779h0-canfd then: patternProperties: - "^channel[5-7]$": false + "^channel[4-7]$": false else: if: not: -- 2.47.2

6 months

1
0
0 0

[PATCH v3 1/2] can: flexcan: only change CAN state when link up in system PM

by haibo.chen＠nxp.com

From: Haibo Chen <haibo.chen(a)nxp.com> After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE. $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000 $ sudo systemctl suspend $ ip -details -s -s a s dev flexcan0 3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000 And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable(a)vger.kernel.org Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> --- Changes for v3: - only handle priv->can.state when netif_running(dev) return true in PM. --- drivers/net/can/flexcan/flexcan-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index b347a1c93536..d4d342d8f490 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -2299,8 +2299,8 @@ static int __maybe_unused flexcan_suspend(struct device *device) } netif_stop_queue(dev); netif_device_detach(dev); + priv->can.state = CAN_STATE_SLEEPING; } - priv->can.state = CAN_STATE_SLEEPING; return 0; } @@ -2311,7 +2311,6 @@ static int __maybe_unused flexcan_resume(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); @@ -2331,6 +2330,7 @@ static int __maybe_unused flexcan_resume(struct device *device) flexcan_chip_interrupts_enable(dev); } + priv->can.state = CAN_STATE_ERROR_ACTIVE; } return 0; -- 2.34.1

6 months

2
2
0 0

[PATCH v2] wifi: mt76: mt7925: fix the incomplete revert of [tx,rx]_ba for MLO

by Mingyen Hsieh

From: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> Since the `Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"` was not completely clean, submit this patch to fully clean it up. Cc: stable(a)vger.kernel.org Fixes: 73915469c55a ("Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"") Change-Id: I2d851e6b79905baae35f691578bf50d56ad0adbf Signed-off-by: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> --- v2: rewrite the subject --- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c index 1ecba46d770d..1bdc313844c4 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c @@ -572,10 +572,10 @@ void mt7925_mcu_rx_event(struct mt792x_dev *dev, struct sk_buff *skb) static int mt7925_mcu_sta_ba(struct mt76_dev *dev, struct mt76_vif_link *mvif, - struct mt76_wcid *wcid, struct ieee80211_ampdu_params *params, bool enable, bool tx) { + struct mt76_wcid *wcid = (struct mt76_wcid *)params->sta->drv_priv; struct sta_rec_ba_uni *ba; struct sk_buff *skb; struct tlv *tlv; @@ -608,13 +608,12 @@ int mt7925_mcu_uni_tx_ba(struct mt792x_dev *dev, { struct mt792x_sta *msta = (struct mt792x_sta *)params->sta->drv_priv; struct mt792x_vif *mvif = msta->vif; - struct mt76_wcid *wcid = &mvif->sta.deflink.wcid; if (enable && !params->amsdu) msta->deflink.wcid.amsdu = false; - return mt7925_mcu_sta_ba(&dev->mt76, &mvif->bss_conf.mt76, wcid, - params, enable, true); + return mt7925_mcu_sta_ba(&dev->mt76, &mvif->bss_conf.mt76, params, + enable, true); } int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev, @@ -623,10 +622,9 @@ int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev, { struct mt792x_sta *msta = (struct mt792x_sta *)params->sta->drv_priv; struct mt792x_vif *mvif = msta->vif; - struct mt76_wcid *wcid = &mvif->sta.deflink.wcid; - return mt7925_mcu_sta_ba(&dev->mt76, &mvif->bss_conf.mt76, wcid, - params, enable, false); + return mt7925_mcu_sta_ba(&dev->mt76, &mvif->bss_conf.mt76, params, + enable, false); } static int mt7925_mcu_read_eeprom(struct mt792x_dev *dev, u32 offset, u8 *val) -- 2.45.2

6 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025