October 2025 - Linux-stable-mirror

[PATCH] net: phy: motorcomm: Fix the issue in the code regarding the incorrect use of time units

by Yi Cong

From: Yi Cong <yicong(a)kylinos.cn> Currently, NS (nanoseconds) is being used, but according to the datasheet, the correct unit should be PS (picoseconds). Fixes: 4869a146cd60 ("net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet phy") Cc: stable(a)vger.kernel.org Signed-off-by: Yi Cong <yicong(a)kylinos.cn> --- drivers/net/phy/motorcomm.c | 102 ++++++++++++++++++------------------ 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index a3593e663059..81491c71e75b 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -171,7 +171,7 @@ * 1b1 enable 1.9ns rxc clock delay */ #define YT8521_CCR_RXC_DLY_EN BIT(8) -#define YT8521_CCR_RXC_DLY_1_900_NS 1900 +#define YT8521_CCR_RXC_DLY_1_900_PS 1900 #define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) #define YT8521_CCR_MODE_UTP_TO_RGMII 0 @@ -196,22 +196,22 @@ #define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10) #define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) #define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) -#define YT8521_RC1R_RGMII_0_000_NS 0 -#define YT8521_RC1R_RGMII_0_150_NS 1 -#define YT8521_RC1R_RGMII_0_300_NS 2 -#define YT8521_RC1R_RGMII_0_450_NS 3 -#define YT8521_RC1R_RGMII_0_600_NS 4 -#define YT8521_RC1R_RGMII_0_750_NS 5 -#define YT8521_RC1R_RGMII_0_900_NS 6 -#define YT8521_RC1R_RGMII_1_050_NS 7 -#define YT8521_RC1R_RGMII_1_200_NS 8 -#define YT8521_RC1R_RGMII_1_350_NS 9 -#define YT8521_RC1R_RGMII_1_500_NS 10 -#define YT8521_RC1R_RGMII_1_650_NS 11 -#define YT8521_RC1R_RGMII_1_800_NS 12 -#define YT8521_RC1R_RGMII_1_950_NS 13 -#define YT8521_RC1R_RGMII_2_100_NS 14 -#define YT8521_RC1R_RGMII_2_250_NS 15 +#define YT8521_RC1R_RGMII_0_000_PS 0 +#define YT8521_RC1R_RGMII_0_150_PS 1 +#define YT8521_RC1R_RGMII_0_300_PS 2 +#define YT8521_RC1R_RGMII_0_450_PS 3 +#define YT8521_RC1R_RGMII_0_600_PS 4 +#define YT8521_RC1R_RGMII_0_750_PS 5 +#define YT8521_RC1R_RGMII_0_900_PS 6 +#define YT8521_RC1R_RGMII_1_050_PS 7 +#define YT8521_RC1R_RGMII_1_200_PS 8 +#define YT8521_RC1R_RGMII_1_350_PS 9 +#define YT8521_RC1R_RGMII_1_500_PS 10 +#define YT8521_RC1R_RGMII_1_650_PS 11 +#define YT8521_RC1R_RGMII_1_800_PS 12 +#define YT8521_RC1R_RGMII_1_950_PS 13 +#define YT8521_RC1R_RGMII_2_100_PS 14 +#define YT8521_RC1R_RGMII_2_250_PS 15 /* LED CONFIG */ #define YT8521_MAX_LEDS 3 @@ -800,40 +800,40 @@ struct ytphy_cfg_reg_map { static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { /* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */ - { 0, YT8521_RC1R_RGMII_0_000_NS }, - { 150, YT8521_RC1R_RGMII_0_150_NS }, - { 300, YT8521_RC1R_RGMII_0_300_NS }, - { 450, YT8521_RC1R_RGMII_0_450_NS }, - { 600, YT8521_RC1R_RGMII_0_600_NS }, - { 750, YT8521_RC1R_RGMII_0_750_NS }, - { 900, YT8521_RC1R_RGMII_0_900_NS }, - { 1050, YT8521_RC1R_RGMII_1_050_NS }, - { 1200, YT8521_RC1R_RGMII_1_200_NS }, - { 1350, YT8521_RC1R_RGMII_1_350_NS }, - { 1500, YT8521_RC1R_RGMII_1_500_NS }, - { 1650, YT8521_RC1R_RGMII_1_650_NS }, - { 1800, YT8521_RC1R_RGMII_1_800_NS }, - { 1950, YT8521_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */ - { 2100, YT8521_RC1R_RGMII_2_100_NS }, - { 2250, YT8521_RC1R_RGMII_2_250_NS }, + { 0, YT8521_RC1R_RGMII_0_000_PS }, + { 150, YT8521_RC1R_RGMII_0_150_PS }, + { 300, YT8521_RC1R_RGMII_0_300_PS }, + { 450, YT8521_RC1R_RGMII_0_450_PS }, + { 600, YT8521_RC1R_RGMII_0_600_PS }, + { 750, YT8521_RC1R_RGMII_0_750_PS }, + { 900, YT8521_RC1R_RGMII_0_900_PS }, + { 1050, YT8521_RC1R_RGMII_1_050_PS }, + { 1200, YT8521_RC1R_RGMII_1_200_PS }, + { 1350, YT8521_RC1R_RGMII_1_350_PS }, + { 1500, YT8521_RC1R_RGMII_1_500_PS }, + { 1650, YT8521_RC1R_RGMII_1_650_PS }, + { 1800, YT8521_RC1R_RGMII_1_800_PS }, + { 1950, YT8521_RC1R_RGMII_1_950_PS }, /* default tx/rx delay */ + { 2100, YT8521_RC1R_RGMII_2_100_PS }, + { 2250, YT8521_RC1R_RGMII_2_250_PS }, /* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */ - { 0 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_000_NS }, - { 150 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_150_NS }, - { 300 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_300_NS }, - { 450 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_450_NS }, - { 600 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_600_NS }, - { 750 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_750_NS }, - { 900 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_900_NS }, - { 1050 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_050_NS }, - { 1200 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_200_NS }, - { 1350 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_350_NS }, - { 1500 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_500_NS }, - { 1650 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_650_NS }, - { 1800 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_800_NS }, - { 1950 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_950_NS }, - { 2100 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_100_NS }, - { 2250 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_250_NS } + { 0 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_000_PS }, + { 150 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_150_PS }, + { 300 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_300_PS }, + { 450 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_450_PS }, + { 600 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_600_PS }, + { 750 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_750_PS }, + { 900 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_0_900_PS }, + { 1050 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_050_PS }, + { 1200 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_200_PS }, + { 1350 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_350_PS }, + { 1500 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_500_PS }, + { 1650 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_650_PS }, + { 1800 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_800_PS }, + { 1950 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_1_950_PS }, + { 2100 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_2_100_PS }, + { 2250 + YT8521_CCR_RXC_DLY_1_900_PS, YT8521_RC1R_RGMII_2_250_PS } }; static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, @@ -890,10 +890,10 @@ static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps", ytphy_rgmii_delays, tb_size, &rxc_dly_en, - YT8521_RC1R_RGMII_1_950_NS); + YT8521_RC1R_RGMII_1_950_PS); tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps", ytphy_rgmii_delays, tb_size, NULL, - YT8521_RC1R_RGMII_1_950_NS); + YT8521_RC1R_RGMII_1_950_PS); switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: -- 2.25.1

1 week, 5 days

3
5
0 0

[PATCH] thermal: thermal_of: Fix device node reference leak in thermal_of_cm_lookup

by Miaoqian Lin

In thermal_of_cm_lookup(), of_parse_phandle() returns a device node with its reference count incremented. The caller is responsible for releasing this reference when the node is no longer needed. Add of_node_put(tr_np) to fix the reference leaks. Found via static analysis. Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/thermal/thermal_of.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c index 1a51a4d240ff..2bb1b8e471cf 100644 --- a/drivers/thermal/thermal_of.c +++ b/drivers/thermal/thermal_of.c @@ -284,8 +284,11 @@ static bool thermal_of_cm_lookup(struct device_node *cm_np, int count, i; tr_np = of_parse_phandle(child, "trip", 0); - if (tr_np != trip->priv) + if (tr_np != trip->priv) { + of_node_put(tr_np); continue; + } + of_node_put(tr_np); /* The trip has been found, look up the cdev. */ count = of_count_phandle_with_args(child, "cooling-device", -- 2.39.5 (Apple Git-154)

1 week, 6 days

2
1
0 0

[PATCH] gcov: Add support for GCC 15

by Peter Oberparleiter

Using gcov on kernels compiled with GCC 15 results in truncated 16-byte long .gcda files with no usable data. To fix this, update GCOV_COUNTERS to match the value defined by GCC 15. Tested with GCC 14.3.0 and GCC 15.2.0. Reported-by: Matthieu Baerts <matttbe(a)kernel.org> Closes: https://github.com/linux-test-project/lcov/issues/445 Tested-by: Matthieu Baerts <matttbe(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Peter Oberparleiter <oberpar(a)linux.ibm.com> --- kernel/gcov/gcc_4_7.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c index a08cc076f332..ffde93d051a4 100644 --- a/kernel/gcov/gcc_4_7.c +++ b/kernel/gcov/gcc_4_7.c @@ -18,7 +18,9 @@ #include <linux/mm.h> #include "gcov.h" -#if (__GNUC__ >= 14) +#if (__GNUC__ >= 15) +#define GCOV_COUNTERS 10 +#elif (__GNUC__ >= 14) #define GCOV_COUNTERS 9 #elif (__GNUC__ >= 10) #define GCOV_COUNTERS 8 -- 2.48.1

1 week, 6 days

1
0
0 0

[PATCH 05/25] media: i2c: ov01a10: Fix passing stream instead of pad to v4l2_subdev_state_get_format()

by Hans de Goede

The 2 argument version of v4l2_subdev_state_get_format() takes the pad as second argument, not the stream. Fixes: bc0e8d91feec ("media: v4l: subdev: Switch to stream-aware state functions") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hansg(a)kernel.org> --- Note the problem pre-exists the Fixes: commit but backporting further will require manual backports and seems unnecessary. --- drivers/media/i2c/ov01a10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/ov01a10.c b/drivers/media/i2c/ov01a10.c index f92867f542f0..0405ec7c75fd 100644 --- a/drivers/media/i2c/ov01a10.c +++ b/drivers/media/i2c/ov01a10.c @@ -731,7 +731,7 @@ static int ov01a10_set_format(struct v4l2_subdev *sd, h_blank); } - format = v4l2_subdev_state_get_format(sd_state, fmt->stream); + format = v4l2_subdev_state_get_format(sd_state, fmt->pad); *format = fmt->format; return 0; -- 2.51.0

1 week, 6 days

2
1
0 0

[PATCH 04/25] media: i2c: ov01a10: Add missing v4l2_subdev_cleanup() calls

by Hans de Goede

Add missing v4l2_subdev_cleanup() calls to cleanup after v4l2_subdev_init_finalize(). Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hansg(a)kernel.org> --- drivers/media/i2c/ov01a10.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/i2c/ov01a10.c b/drivers/media/i2c/ov01a10.c index 95d6a0f046a0..f92867f542f0 100644 --- a/drivers/media/i2c/ov01a10.c +++ b/drivers/media/i2c/ov01a10.c @@ -864,6 +864,7 @@ static void ov01a10_remove(struct i2c_client *client) struct v4l2_subdev *sd = i2c_get_clientdata(client); v4l2_async_unregister_subdev(sd); + v4l2_subdev_cleanup(sd); media_entity_cleanup(&sd->entity); v4l2_ctrl_handler_free(sd->ctrl_handler); @@ -934,6 +935,7 @@ static int ov01a10_probe(struct i2c_client *client) err_pm_disable: pm_runtime_disable(dev); pm_runtime_set_suspended(&client->dev); + v4l2_subdev_cleanup(&ov01a10->sd); err_media_entity_cleanup: media_entity_cleanup(&ov01a10->sd.entity); -- 2.51.0

1 week, 6 days

3
3
0 0

[PATCH wireless v4 1/4] wifi: cfg80211: add an hrtimer based delayed work item

by Miri Korenblit

From: Benjamin Berg <benjamin.berg(a)intel.com> The normal timer mechanism assume that timeout further in the future need a lower accuracy. As an example, the granularity for a timer scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms. This granularity is perfectly sufficient for e.g. timeouts, but there are other types of events that will happen at a future point in time and require a higher accuracy. Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The API is almost identical to the existing wiphy_delayed_work and it can be used as a drop-in replacement after minor adjustments. The work will be scheduled relative to the current time with a slack of 1 millisecond. CC: stable(a)vger.kernel.org # 6.4+ Signed-off-by: Benjamin Berg <benjamin.berg(a)intel.com> Reviewed-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit(a)intel.com> --- include/net/cfg80211.h | 78 ++++++++++++++++++++++++++++++++++++++++++ net/wireless/core.c | 56 ++++++++++++++++++++++++++++++ net/wireless/trace.h | 21 ++++++++++++ 3 files changed, 155 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 781624f5913a..820e299f06b5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -6435,6 +6435,11 @@ static inline void wiphy_delayed_work_init(struct wiphy_delayed_work *dwork, * after wiphy_lock() was called. Therefore, wiphy_cancel_work() can * use just cancel_work() instead of cancel_work_sync(), it requires * being in a section protected by wiphy_lock(). + * + * Note that these are scheduled with a timer where the accuracy + * becomes less the longer in the future the scheduled timer is. Use + * wiphy_hrtimer_work_queue() if the timer must be not be late by more + * than approximately 10 percent. */ void wiphy_delayed_work_queue(struct wiphy *wiphy, struct wiphy_delayed_work *dwork, @@ -6506,6 +6511,79 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy, bool wiphy_delayed_work_pending(struct wiphy *wiphy, struct wiphy_delayed_work *dwork); +struct wiphy_hrtimer_work { + struct wiphy_work work; + struct wiphy *wiphy; + struct hrtimer timer; +}; + +enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t); + +static inline void wiphy_hrtimer_work_init(struct wiphy_hrtimer_work *hrwork, + wiphy_work_func_t func) +{ + hrtimer_setup(&hrwork->timer, wiphy_hrtimer_work_timer, + CLOCK_BOOTTIME, HRTIMER_MODE_REL); + wiphy_work_init(&hrwork->work, func); +} + +/** + * wiphy_hrtimer_work_queue - queue hrtimer work for the wiphy + * @wiphy: the wiphy to queue for + * @hrwork: the high resolution timer worker + * @delay: the delay given as a ktime_t + * + * Please refer to wiphy_delayed_work_queue(). The difference is that + * the hrtimer work uses a high resolution timer for scheduling. This + * may be needed if timeouts might be scheduled further in the future + * and the accuracy of the normal timer is not sufficient. + * + * Expect a delay of a few milliseconds as the timer is scheduled + * with some slack and some more time may pass between queueing the + * work and its start. + */ +void wiphy_hrtimer_work_queue(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork, + ktime_t delay); + +/** + * wiphy_hrtimer_work_cancel - cancel previously queued hrtimer work + * @wiphy: the wiphy, for debug purposes + * @hrtimer: the hrtimer work to cancel + * + * Cancel the work *without* waiting for it, this assumes being + * called under the wiphy mutex acquired by wiphy_lock(). + */ +void wiphy_hrtimer_work_cancel(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrtimer); + +/** + * wiphy_hrtimer_work_flush - flush previously queued hrtimer work + * @wiphy: the wiphy, for debug purposes + * @hrwork: the hrtimer work to flush + * + * Flush the work (i.e. run it if pending). This must be called + * under the wiphy mutex acquired by wiphy_lock(). + */ +void wiphy_hrtimer_work_flush(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork); + +/** + * wiphy_hrtimer_work_pending - Find out whether a wiphy hrtimer + * work item is currently pending. + * + * @wiphy: the wiphy, for debug purposes + * @hrwork: the hrtimer work in question + * + * Return: true if timer is pending, false otherwise + * + * Please refer to the wiphy_delayed_work_pending() documentation as + * this is the equivalent function for hrtimer based delayed work + * items. + */ +bool wiphy_hrtimer_work_pending(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork); + /** * enum ieee80211_ap_reg_power - regulatory power for an Access Point * diff --git a/net/wireless/core.c b/net/wireless/core.c index 797f9f2004a6..54a34d8d356e 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -1787,6 +1787,62 @@ bool wiphy_delayed_work_pending(struct wiphy *wiphy, } EXPORT_SYMBOL_GPL(wiphy_delayed_work_pending); +enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t) +{ + struct wiphy_hrtimer_work *hrwork = + container_of(t, struct wiphy_hrtimer_work, timer); + + wiphy_work_queue(hrwork->wiphy, &hrwork->work); + + return HRTIMER_NORESTART; +} +EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_timer); + +void wiphy_hrtimer_work_queue(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork, + ktime_t delay) +{ + trace_wiphy_hrtimer_work_queue(wiphy, &hrwork->work, delay); + + if (!delay) { + hrtimer_cancel(&hrwork->timer); + wiphy_work_queue(wiphy, &hrwork->work); + return; + } + + hrwork->wiphy = wiphy; + hrtimer_start_range_ns(&hrwork->timer, delay, + 1000 * NSEC_PER_USEC, HRTIMER_MODE_REL); +} +EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_queue); + +void wiphy_hrtimer_work_cancel(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork) +{ + lockdep_assert_held(&wiphy->mtx); + + hrtimer_cancel(&hrwork->timer); + wiphy_work_cancel(wiphy, &hrwork->work); +} +EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_cancel); + +void wiphy_hrtimer_work_flush(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork) +{ + lockdep_assert_held(&wiphy->mtx); + + hrtimer_cancel(&hrwork->timer); + wiphy_work_flush(wiphy, &hrwork->work); +} +EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_flush); + +bool wiphy_hrtimer_work_pending(struct wiphy *wiphy, + struct wiphy_hrtimer_work *hrwork) +{ + return hrtimer_is_queued(&hrwork->timer); +} +EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_pending); + static int __init cfg80211_init(void) { int err; diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 8a4c34112eb5..2b71f1d867a0 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -304,6 +304,27 @@ TRACE_EVENT(wiphy_delayed_work_queue, __entry->delay) ); +TRACE_EVENT(wiphy_hrtimer_work_queue, + TP_PROTO(struct wiphy *wiphy, struct wiphy_work *work, + ktime_t delay), + TP_ARGS(wiphy, work, delay), + TP_STRUCT__entry( + WIPHY_ENTRY + __field(void *, instance) + __field(void *, func) + __field(ktime_t, delay) + ), + TP_fast_assign( + WIPHY_ASSIGN; + __entry->instance = work; + __entry->func = work->func; + __entry->delay = delay; + ), + TP_printk(WIPHY_PR_FMT " instance=%p func=%pS delay=%llu", + WIPHY_PR_ARG, __entry->instance, __entry->func, + __entry->delay) +); + TRACE_EVENT(wiphy_work_worker_start, TP_PROTO(struct wiphy *wiphy), TP_ARGS(wiphy), -- 2.34.1

1 week, 6 days

1
0
0 0

[PATCH] phy: ti: omap-usb2: Fix device node reference leak in omap_usb2_probe

by Miaoqian Lin

In omap_usb2_probe(), of_parse_phandle() returns a device node with its reference count incremented. The caller is responsible for releasing this reference when the node is no longer needed. Add of_node_put(control_node) after usage to fix the reference leak. Found via static analysis. Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/phy/ti/phy-omap-usb2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c index 1eb252604441..660df3181e4f 100644 --- a/drivers/phy/ti/phy-omap-usb2.c +++ b/drivers/phy/ti/phy-omap-usb2.c @@ -426,6 +426,7 @@ static int omap_usb2_probe(struct platform_device *pdev) } control_pdev = of_find_device_by_node(control_node); + of_node_put(control_node); if (!control_pdev) { dev_err(&pdev->dev, "Failed to get control device\n"); return -EINVAL; -- 2.39.5 (Apple Git-154)

1 week, 6 days

2
1
0 0

[PATCH v2 1/2] media: mediatek: mdp: fix device leak on probe

by Johan Hovold

Make sure to drop the reference taken when looking up the VPU firmware device during probe on probe failure (e.g. probe deferral) and on driver unbind. Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable(a)vger.kernel.org # 4.10 Cc: Minghsiu Tsai <minghsiu.tsai(a)mediatek.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/media/platform/mediatek/mdp/mtk_mdp_core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c index 80fdc6ff57e0..5c7dcf4090f4 100644 --- a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c +++ b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c @@ -198,7 +198,7 @@ static int mtk_mdp_probe(struct platform_device *pdev) VPU_RST_MDP); if (ret) { dev_err(&pdev->dev, "Failed to register reset handler\n"); - goto err_m2m_register; + goto err_put_vpu; } platform_set_drvdata(pdev, mdp); @@ -206,7 +206,7 @@ static int mtk_mdp_probe(struct platform_device *pdev) ret = vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { dev_err(&pdev->dev, "Failed to set vb2 dma mag seg size\n"); - goto err_m2m_register; + goto err_put_vpu; } pm_runtime_enable(dev); @@ -214,6 +214,8 @@ static int mtk_mdp_probe(struct platform_device *pdev) return 0; +err_put_vpu: + put_device(&mdp->vpu_dev->dev); err_m2m_register: v4l2_device_unregister(&mdp->v4l2_dev); @@ -241,6 +243,7 @@ static void mtk_mdp_remove(struct platform_device *pdev) struct mtk_mdp_comp *comp, *comp_temp; pm_runtime_disable(&pdev->dev); + put_device(&mdp->vpu_dev->dev); vb2_dma_contig_clear_max_seg_size(&pdev->dev); mtk_mdp_unregister_m2m_device(mdp); v4l2_device_unregister(&mdp->v4l2_dev); -- 2.51.0

1 week, 6 days

1
0
0 0

[PATCH] drm/meson: Fix reference count leak in meson_encoder_dsi_probe

by Miaoqian Lin

The of_graph_get_remote_node() function returns a device node with its reference count incremented. The caller is responsible for calling of_node_put() to release this reference when done. Fixes: 42dcf15f901c ("drm/meson: add DSI encoder") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/gpu/drm/meson/meson_encoder_dsi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/meson/meson_encoder_dsi.c b/drivers/gpu/drm/meson/meson_encoder_dsi.c index 6c6624f9ba24..01edf46e30d0 100644 --- a/drivers/gpu/drm/meson/meson_encoder_dsi.c +++ b/drivers/gpu/drm/meson/meson_encoder_dsi.c @@ -121,6 +121,7 @@ int meson_encoder_dsi_probe(struct meson_drm *priv) } meson_encoder_dsi->next_bridge = of_drm_find_bridge(remote); + of_node_put(remote); if (!meson_encoder_dsi->next_bridge) return dev_err_probe(priv->dev, -EPROBE_DEFER, "Failed to find DSI transceiver bridge\n"); -- 2.39.5 (Apple Git-154)

1 week, 6 days

2
1
0 0

[PATCH] soc: samsung: exynos-pmu: fix reference count leak in exynos_get_pmu_regmap_by_phandle

by Miaoqian Lin

The driver_find_device_by_of_node() function calls driver_find_device and returns a device with its reference count incremented. Add the missing put_device() call to release this reference after the device is used. Found via static analysis. Fixes: 0b7c6075022c ("soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/soc/samsung/exynos-pmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c index 22c50ca2aa79..a53c1f882e1a 100644 --- a/drivers/soc/samsung/exynos-pmu.c +++ b/drivers/soc/samsung/exynos-pmu.c @@ -346,6 +346,7 @@ struct regmap *exynos_get_pmu_regmap_by_phandle(struct device_node *np, if (!dev) return ERR_PTR(-EPROBE_DEFER); + put_device(dev); return syscon_node_to_regmap(pmu_np); } EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap_by_phandle); -- 2.39.5 (Apple Git-154)

1 week, 6 days

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025