From: Aurabindo Pillai <aurabindo.pillai(a)amd.com>
[WHY & HOW]
When underscan is set through xrandr, it causes the stream destination
rect to change in a way it becomes complicated to handle the calculations
for subvp. Since this is a corner case, disable subvp when underscan is
set.
Fix the existing check that is supposed to catch this corner case by
adding a check based on the parameters in the stream
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone(a)amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai(a)amd.com>
Signed-off-by: Alex Hung <alex.hung(a)amd.com>
---
.../drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
index b0d9aed0f265..8697eac1e1f7 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
@@ -858,7 +858,9 @@ static void populate_dml21_plane_config_from_plane_state(struct dml2_context *dm
plane->immediate_flip = plane_state->flip_immediate;
- plane->composition.rect_out_height_spans_vactive = plane_state->dst_rect.height >= stream->timing.v_addressable;
+ plane->composition.rect_out_height_spans_vactive =
+ plane_state->dst_rect.height >= stream->timing.v_addressable &&
+ stream->dst.height >= stream->timing.v_addressable;
}
//TODO : Could be possibly moved to a common helper layer.
--
2.34.1
From: Martin Tsai <martin.tsai(a)amd.com>
[WHY]
DSC on eDP could be enabled during VBIOS post. The enabled
DSC may not be disabled when enter to OS, once the system was
in second screen only mode before entering to S4. In this
case, OS will not send setTimings to reset eDP path again.
The enabled DSC HW will make a new stream without DSC cannot
output normally if it reused this pipe with enabled DSC.
[HOW]
In accelerated mode, to clean up DSC blocks if eDP is on link
but not active when we are not in fast boot and seamless boot.
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu(a)amd.com>
Signed-off-by: Martin Tsai <martin.tsai(a)amd.com>
Signed-off-by: Alex Hung <alex.hung(a)amd.com>
---
.../amd/display/dc/hwss/dce110/dce110_hwseq.c | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
index d52ce58c6a98..aa7479b31898 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
@@ -57,6 +57,7 @@
#include "panel_cntl.h"
#include "dc_state_priv.h"
#include "dpcd_defs.h"
+#include "dsc.h"
/* include DCE11 register header files */
#include "dce/dce_11_0_d.h"
#include "dce/dce_11_0_sh_mask.h"
@@ -1823,6 +1824,48 @@ static void get_edp_links_with_sink(
}
}
+static void clean_up_dsc_blocks(struct dc *dc)
+{
+ struct display_stream_compressor *dsc = NULL;
+ struct timing_generator *tg = NULL;
+ struct stream_encoder *se = NULL;
+ struct dccg *dccg = dc->res_pool->dccg;
+ struct pg_cntl *pg_cntl = dc->res_pool->pg_cntl;
+ int i;
+
+ if (dc->ctx->dce_version != DCN_VERSION_3_5 &&
+ dc->ctx->dce_version != DCN_VERSION_3_51)
+ return;
+
+ for (i = 0; i < dc->res_pool->res_cap->num_dsc; i++) {
+ struct dcn_dsc_state s = {0};
+
+ dsc = dc->res_pool->dscs[i];
+ dsc->funcs->dsc_read_state(dsc, &s);
+ if (s.dsc_fw_en) {
+ /* disable DSC in OPTC */
+ if (i < dc->res_pool->timing_generator_count) {
+ tg = dc->res_pool->timing_generators[i];
+ tg->funcs->set_dsc_config(tg, OPTC_DSC_DISABLED, 0, 0);
+ }
+ /* disable DSC in stream encoder */
+ if (i < dc->res_pool->stream_enc_count) {
+ se = dc->res_pool->stream_enc[i];
+ se->funcs->dp_set_dsc_config(se, OPTC_DSC_DISABLED, 0, 0);
+ se->funcs->dp_set_dsc_pps_info_packet(se, false, NULL, true);
+ }
+ /* disable DSC block */
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, dsc->inst);
+ dsc->funcs->dsc_disable(dsc);
+
+ /* power down DSC */
+ if (pg_cntl != NULL)
+ pg_cntl->funcs->dsc_pg_control(pg_cntl, dsc->inst, false);
+ }
+ }
+}
+
/*
* When ASIC goes from VBIOS/VGA mode to driver/accelerated mode we need:
* 1. Power down all DC HW blocks
@@ -1927,6 +1970,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr);
power_down_all_hw_blocks(dc);
+
+ /* DSC could be enabled on eDP during VBIOS post.
+ * To clean up dsc blocks if eDP is in link but not active.
+ */
+ if (edp_link_with_sink && (edp_stream_num == 0))
+ clean_up_dsc_blocks(dc);
+
disable_vga_and_power_gate_all_controllers(dc);
if (edp_link_with_sink && !keep_edp_vdd_on)
dc->hwss.edp_power_control(edp_link_with_sink, false);
--
2.34.1