This is a note to let you know that I've just added the patch titled
bcache: segregate flash only volume write streams
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
bcache-segregate-flash-only-volume-write-streams.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Tang Junhui <tang.junhui(a)zte.com.cn>
Date: Mon, 8 Jan 2018 12:21:21 -0800
Subject: bcache: segregate flash only volume write streams
From: Tang Junhui <tang.junhui(a)zte.com.cn>
[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ]
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |
So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.
In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.
Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.
[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn>
Reviewed-by: Michael Lyle <mlyle(a)lyle.org>
Signed-off-by: Michael Lyle <mlyle(a)lyle.org>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/md/bcache/alloc.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -514,15 +514,21 @@ struct open_bucket {
/*
* We keep multiple buckets open for writes, and try to segregate different
- * write streams for better cache utilization: first we look for a bucket where
- * the last write to it was sequential with the current write, and failing that
- * we look for a bucket that was last used by the same task.
+ * write streams for better cache utilization: first we try to segregate flash
+ * only volume write streams from cached devices, secondly we look for a bucket
+ * where the last write to it was sequential with the current write, and
+ * failing that we look for a bucket that was last used by the same task.
*
* The ideas is if you've got multiple tasks pulling data into the cache at the
* same time, you'll get better cache utilization if you try to segregate their
* data and preserve locality.
*
- * For example, say you've starting Firefox at the same time you're copying a
+ * For example, dirty sectors of flash only volume is not reclaimable, if their
+ * dirty sectors mixed with dirty sectors of cached device, such buckets will
+ * be marked as dirty and won't be reclaimed, though the dirty data of cached
+ * device have been written back to backend device.
+ *
+ * And say you've starting Firefox at the same time you're copying a
* bunch of files. Firefox will likely end up being fairly hot and stay in the
* cache awhile, but the data you copied might not be; if you wrote all that
* data to the same buckets it'd get invalidated at the same time.
@@ -539,7 +545,10 @@ static struct open_bucket *pick_data_buc
struct open_bucket *ret, *ret_task = NULL;
list_for_each_entry_reverse(ret, &c->data_buckets, list)
- if (!bkey_cmp(&ret->key, search))
+ if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) !=
+ UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)]))
+ continue;
+ else if (!bkey_cmp(&ret->key, search))
goto found;
else if (ret->last_write_point == write_point)
ret_task = ret;
Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are
queue-4.4/bcache-segregate-flash-only-volume-write-streams.patch
queue-4.4/bcache-stop-writeback-thread-after-detaching.patch
This is a note to let you know that I've just added the patch titled
ath5k: fix memory leak on buf on failed eeprom read
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Colin Ian King <colin.king(a)canonical.com>
Date: Wed, 3 May 2017 15:26:00 +0100
Subject: ath5k: fix memory leak on buf on failed eeprom read
From: Colin Ian King <colin.king(a)canonical.com>
[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]
The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.
Detected by CoverityScan, CID#1248782 ("Resource Leak")
Signed-off-by: Colin Ian King <colin.king(a)canonical.com>
Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/net/wireless/ath/ath5k/debug.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -939,7 +939,10 @@ static int open_file_eeprom(struct inode
}
for (i = 0; i < eesize; ++i) {
- AR5K_EEPROM_READ(i, val);
+ if (!ath5k_hw_nvram_read(ah, i, &val)) {
+ ret = -EIO;
+ goto freebuf;
+ }
buf[i] = val;
}
Patches currently in stable-queue which might be from colin.king(a)canonical.com are
queue-4.4/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch
queue-4.4/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch
queue-4.4/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch
queue-4.4/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch
This is a note to let you know that I've just added the patch titled
ata: libahci: properly propagate return value of platform_get_irq()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com>
Date: Tue, 16 May 2017 14:06:12 +0200
Subject: ata: libahci: properly propagate return value of platform_get_irq()
From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com>
[ Upstream commit c034640a32f8456018d9c8c83799ead683046b95 ]
When platform_get_irq() fails, it returns an error code, which
libahci_platform and replaces it by -EINVAL. This commit fixes that by
propagating the error code. It fixes the situation where
platform_get_irq() returns -EPROBE_DEFER because the interrupt
controller is not available yet, and generally looks like the right
thing to do.
We pay attention to not show the "no irq" message when we are in an
EPROBE_DEFER situation, because the driver probing will be retried
later on, once the interrupt controller becomes available to provide
the interrupt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede(a)redhat.com>
Signed-off-by: Tejun Heo <tj(a)kernel.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/ata/libahci_platform.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platf
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
+ if (irq != -EPROBE_DEFER)
+ dev_err(dev, "no irq\n");
+ return irq;
}
hpriv->irq = irq;
Patches currently in stable-queue which might be from thomas.petazzoni(a)free-electrons.com are
queue-4.4/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch
This is a note to let you know that I've just added the patch titled
async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Anup Patel <anup.patel(a)broadcom.com>
Date: Mon, 15 May 2017 10:34:53 +0530
Subject: async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
From: Anup Patel <anup.patel(a)broadcom.com>
[ Upstream commit baae03a0e2497f49704628fd0aaf993cf98e1b99 ]
The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output
of Tx descriptor is to be used by next/dependent Tx descriptor.
The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome()
when calling dma->device_prep_dma_pq() under following conditions:
1. ASYNC_TX_FENCE not set in submit->flags
2. DMA_PREP_FENCE not set in dma_flags
3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags)
This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking
inspiration from do_async_xor() implementation.
Signed-off-by: Anup Patel <anup.patel(a)broadcom.com>
Reviewed-by: Ray Jui <ray.jui(a)broadcom.com>
Reviewed-by: Scott Branden <scott.branden(a)broadcom.com>
Acked-by: Dan Williams <dan.j.williams(a)intel.com>
Signed-off-by: Vinod Koul <vinod.koul(a)intel.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
crypto/async_tx/async_pq.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *c
dma_addr_t dma_dest[2];
int src_off = 0;
- if (submit->flags & ASYNC_TX_FENCE)
- dma_flags |= DMA_PREP_FENCE;
-
while (src_cnt > 0) {
submit->flags = flags_orig;
pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *c
if (cb_fn_orig)
dma_flags |= DMA_PREP_INTERRUPT;
}
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Drivers force forward progress in case they can not provide
* a descriptor
Patches currently in stable-queue which might be from anup.patel(a)broadcom.com are
queue-4.4/async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch
This is a note to let you know that I've just added the patch titled
ASoC: rsnd: SSI PIO adjust to 24bit mode
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
asoc-rsnd-ssi-pio-adjust-to-24bit-mode.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>
Date: Wed, 24 May 2017 01:17:10 +0000
Subject: ASoC: rsnd: SSI PIO adjust to 24bit mode
From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>
[ Upstream commit 7819a942de7b993771bd9377babc80485fe7606b ]
commit 90431eb49bff ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI")
fixups 24bit mode data alignment, but PIO was not cared.
This patch fixes PIO mode 24bit data alignment
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/soc/sh/rcar/ssi.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -453,6 +453,13 @@ static void __rsnd_ssi_interrupt(struct
struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
u32 *buf = (u32 *)(runtime->dma_area +
rsnd_dai_pointer_offset(io, 0));
+ int shift = 0;
+
+ switch (runtime->sample_bits) {
+ case 32:
+ shift = 8;
+ break;
+ }
/*
* 8/16/32 data can be assesse to TDR/RDR register
@@ -460,9 +467,9 @@ static void __rsnd_ssi_interrupt(struct
* see rsnd_ssi_init()
*/
if (rsnd_io_is_play(io))
- rsnd_mod_write(mod, SSITDR, *buf);
+ rsnd_mod_write(mod, SSITDR, (*buf) << shift);
else
- *buf = rsnd_mod_read(mod, SSIRDR);
+ *buf = (rsnd_mod_read(mod, SSIRDR) >> shift);
elapsed = rsnd_dai_pointer_update(io, sizeof(*buf));
}
Patches currently in stable-queue which might be from kuninori.morimoto.gx(a)renesas.com are
queue-4.4/asoc-rsnd-ssi-pio-adjust-to-24bit-mode.patch
This is a note to let you know that I've just added the patch titled
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 6 Jan 2018 21:18:24 +0100
Subject: ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
[ Upstream commit eaadb1caa966a91128297b754e90b7c92b350a00 ]
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/soc/intel/atom/sst/sst_stream.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/intel/atom/sst/sst_stream.c
+++ b/sound/soc/intel/atom/sst/sst_stream.c
@@ -221,7 +221,7 @@ int sst_send_byte_stream_mrfld(struct in
sst_free_block(sst_drv_ctx, block);
out:
test_and_clear_bit(pvt_id, &sst_drv_ctx->pvt_id);
- return 0;
+ return ret;
}
/*
Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are
queue-4.4/cpuidle-dt-add-missing-of_node_put.patch
queue-4.4/edac-mv64x60-fix-an-error-handling-path.patch
queue-4.4/smb2-fix-share-type-handling.patch
queue-4.4/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch
This is a note to let you know that I've just added the patch titled
ASoC: Intel: cht_bsw_rt5645: Analog Mic support
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
asoc-intel-cht_bsw_rt5645-analog-mic-support.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Hans de Goede <hdegoede(a)redhat.com>
Date: Tue, 2 Jan 2018 19:53:14 +0100
Subject: ASoC: Intel: cht_bsw_rt5645: Analog Mic support
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit b70b309950418437bbd2a30afd169c4f09dee3e5 ]
Various Cherry Trail boards with a rt5645 codec have an analog mic
connected to IN2P + IN2N. The mic on this boards also needs micbias to
be enabled, on some boards micbias1 is used and on others micbias2, so
we enable both.
This commit adds a new "Int Analog Mic" DAPM widget for this, so that we
do not end up enabling micbias on boards with a digital mic which uses
the already present "Int Mic" widget. Some existing UCM files already
refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice,
but these don't work anyways since they enable the RECMIX BST1 Switch
instead of the BST2 switch.
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/soc/intel/boards/cht_bsw_rt5645.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -96,6 +96,7 @@ static const struct snd_soc_dapm_widget
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_MIC("Int Analog Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
platform_clock_control, SND_SOC_DAPM_POST_PMD),
@@ -106,6 +107,8 @@ static const struct snd_soc_dapm_route c
{"IN1N", NULL, "Headset Mic"},
{"DMIC L1", NULL, "Int Mic"},
{"DMIC R1", NULL, "Int Mic"},
+ {"IN2P", NULL, "Int Analog Mic"},
+ {"IN2N", NULL, "Int Analog Mic"},
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"Ext Spk", NULL, "SPOL"},
@@ -119,6 +122,9 @@ static const struct snd_soc_dapm_route c
{"Headphone", NULL, "Platform Clock"},
{"Headset Mic", NULL, "Platform Clock"},
{"Int Mic", NULL, "Platform Clock"},
+ {"Int Analog Mic", NULL, "Platform Clock"},
+ {"Int Analog Mic", NULL, "micbias1"},
+ {"Int Analog Mic", NULL, "micbias2"},
{"Ext Spk", NULL, "Platform Clock"},
};
@@ -147,6 +153,7 @@ static const struct snd_kcontrol_new cht
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Int Mic"),
+ SOC_DAPM_PIN_SWITCH("Int Analog Mic"),
SOC_DAPM_PIN_SWITCH("Ext Spk"),
};
Patches currently in stable-queue which might be from hdegoede(a)redhat.com are
queue-4.4/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch
queue-4.4/asoc-intel-cht_bsw_rt5645-analog-mic-support.patch
This is a note to let you know that I've just added the patch titled
arp: honour gratuitous ARP _replies_
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arp-honour-gratuitous-arp-_replies_.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Ihar Hrachyshka <ihrachys(a)redhat.com>
Date: Tue, 16 May 2017 07:53:43 -0700
Subject: arp: honour gratuitous ARP _replies_
From: Ihar Hrachyshka <ihrachys(a)redhat.com>
[ Upstream commit 23d268eb240954e6e78f7cfab04f2b1e79f84489 ]
When arp_accept is 1, gratuitous ARPs are supposed to override matching
entries irrespective of whether they arrive during locktime. This was
implemented in commit 56022a8fdd87 ("ipv4: arp: update neighbour address
when a gratuitous arp is received and arp_accept is set")
There is a glitch in the patch though. RFC 2002, section 4.6, "ARP,
Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can
be either of Request or Reply type. Those Reply gratuitous ARPs can be
triggered with standard tooling, for example, arping -A option does just
that.
This patch fixes the glitch, making both Request and Reply flavours of
gratuitous ARPs to behave identically.
As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware
Address field should also be set to the link-layer address to which this
cache entry should be updated. The field is present in ARP over Ethernet
but not in IEEE 1394. In this patch, I don't consider any broadcasted
ARP replies as gratuitous if the field is not present, to conform the
standard. It's not clear whether there is such a thing for IEEE 1394 as
a gratuitous ARP reply; until it's cleared up, we will ignore such
broadcasts. Note that they will still update existing ARP cache entries,
assuming they arrive out of locktime time interval.
Signed-off-by: Ihar Hrachyshka <ihrachys(a)redhat.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
net/ipv4/arp.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -658,6 +658,7 @@ static int arp_process(struct net *net,
unsigned char *arp_ptr;
struct rtable *rt;
unsigned char *sha;
+ unsigned char *tha = NULL;
__be32 sip, tip;
u16 dev_type = dev->type;
int addr_type;
@@ -729,6 +730,7 @@ static int arp_process(struct net *net,
break;
#endif
default:
+ tha = arp_ptr;
arp_ptr += dev->addr_len;
}
memcpy(&tip, arp_ptr, 4);
@@ -839,8 +841,18 @@ static int arp_process(struct net *net,
It is possible, that this option should be enabled for some
devices (strip is candidate)
*/
- is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip &&
- addr_type == RTN_UNICAST;
+ is_garp = tip == sip && addr_type == RTN_UNICAST;
+
+ /* Unsolicited ARP _replies_ also require target hwaddr to be
+ * the same as source.
+ */
+ if (is_garp && arp->ar_op == htons(ARPOP_REPLY))
+ is_garp =
+ /* IPv4 over IEEE 1394 doesn't provide target
+ * hardware address field in its ARP payload.
+ */
+ tha &&
+ !memcmp(tha, sha, dev->addr_len);
if (!n &&
((arp->ar_op == htons(ARPOP_REPLY) &&
Patches currently in stable-queue which might be from ihrachys(a)redhat.com are
queue-4.4/arp-honour-gratuitous-arp-_replies_.patch
queue-4.4/neighbour-update-neigh-timestamps-iff-update-is-effective.patch
This is a note to let you know that I've just added the patch titled
arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Will Deacon <will.deacon(a)arm.com>
Date: Wed, 5 Apr 2017 11:14:05 +0100
Subject: arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage
From: Will Deacon <will.deacon(a)arm.com>
[ Upstream commit 5f16a046f8e144c294ef98cd29d9458b5f8273e5 ]
FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg
field as a shift value, potentially leading to a left shift value that
is negative or with an absolute value that is significantly larger then
the size of the type. UBSAN chokes with:
================================================================================
UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13
shift exponent -1 is negative
CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11
Hardware name: linux,dummy-virt (DT)
Call trace:
[<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73
[<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228
[<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline]
[<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52
[<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164
[<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421
[<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline]
[<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline]
[<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231
[<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline]
[<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249
[<ffff200008084770>] el0_svc_naked+0x24/0x28
================================================================================
syz-executor1 uses obsolete (PF_INET,SOCK_PACKET)
sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT
This patch attempts to fix some of this by:
* Making encoded_op an unsigned type, so we can shift it left even if
the top bit is set.
* Casting to signed prior to shifting right when extracting oparg
and cmparg
* Consider only the bottom 5 bits of oparg when using it as a left-shift
value.
Whilst I think this catches all of the issues, I'd much prefer to remove
this stuff, as I think it's unused and the bugs are copy-pasted between
a bunch of architectures.
Reviewed-by: Robin Murphy <robin.murphy(a)arm.com>
Signed-off-by: Will Deacon <will.deacon(a)arm.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm64/include/asm/futex.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@@ -53,16 +53,16 @@
: "memory")
static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
- int oparg = (encoded_op << 8) >> 20;
- int cmparg = (encoded_op << 20) >> 20;
+ int oparg = (int)(encoded_op << 8) >> 20;
+ int cmparg = (int)(encoded_op << 20) >> 20;
int oldval = 0, ret, tmp;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
- oparg = 1 << oparg;
+ oparg = 1U << (oparg & 0x1f);
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
Patches currently in stable-queue which might be from will.deacon(a)arm.com are
queue-4.4/arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch
This is a note to let you know that I've just added the patch titled
ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Tue Apr 10 10:31:53 CEST 2018
From: Leonard Crestez <leonard.crestez(a)nxp.com>
Date: Tue, 6 Jun 2017 20:50:42 +0300
Subject: ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull
From: Leonard Crestez <leonard.crestez(a)nxp.com>
[ Upstream commit b3ea575770c7eeb259c77b6861cd14d00eb309df ]
Support for imx6ull is already present but it's based on
of_machine_is_compatible("fsl,imx6ull") checks. Add it to the MXC_CPU_*
enumeration as well.
This also fixes /sys/devices/soc0/soc_id reading "Unknown".
Signed-off-by: Leonard Crestez <leonard.crestez(a)nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com>
Signed-off-by: Shawn Guo <shawnguo(a)kernel.org>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/mach-imx/cpu.c | 3 +++
arch/arm/mach-imx/mxc.h | 6 ++++++
2 files changed, 9 insertions(+)
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -133,6 +133,9 @@ struct device * __init imx_soc_device_in
case MXC_CPU_IMX6UL:
soc_id = "i.MX6UL";
break;
+ case MXC_CPU_IMX6ULL:
+ soc_id = "i.MX6ULL";
+ break;
case MXC_CPU_IMX7D:
soc_id = "i.MX7D";
break;
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -39,6 +39,7 @@
#define MXC_CPU_IMX6SX 0x62
#define MXC_CPU_IMX6Q 0x63
#define MXC_CPU_IMX6UL 0x64
+#define MXC_CPU_IMX6ULL 0x65
#define MXC_CPU_IMX7D 0x72
#define IMX_DDR_TYPE_LPDDR2 1
@@ -171,6 +172,11 @@ static inline bool cpu_is_imx6ul(void)
return __mxc_cpu_type == MXC_CPU_IMX6UL;
}
+static inline bool cpu_is_imx6ull(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6ULL;
+}
+
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
Patches currently in stable-queue which might be from leonard.crestez(a)nxp.com are
queue-4.4/arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch