April 2018 - Linux-stable-mirror

Patch "cxgb4: FW upgrade fixes" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cxgb4: FW upgrade fixes to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cxgb4-fw-upgrade-fixes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Arjun Vynipadath <arjun(a)chelsio.com> Date: Tue, 30 May 2017 18:06:06 +0530 Subject: cxgb4: FW upgrade fixes From: Arjun Vynipadath <arjun(a)chelsio.com> [ Upstream commit 26747211486c5bc7dd014c3caab206576e00c0d0 ] Disable FW_OK flag while flashing Firmware. This will help to fix any potential mailbox timeouts during Firmware flash. Grab new devlog parameters after Firmware restart. When we FLASH new Firmware onto an adapter, the new Firmware may have the Firmware Device Log located at a different memory address or have a different size for it. Signed-off-by: Arjun Vynipadath <arjun(a)chelsio.com> Signed-off-by: Casey Leedom <leedom(a)chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr(a)chelsio.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -6076,13 +6076,18 @@ int t4_fw_upgrade(struct adapter *adap, if (!t4_fw_matches_chip(adap, fw_hdr)) return -EINVAL; + /* Disable FW_OK flag so that mbox commands with FW_OK flag set + * wont be sent when we are flashing FW. + */ + adap->flags &= ~FW_OK; + ret = t4_fw_halt(adap, mbox, force); if (ret < 0 && !force) - return ret; + goto out; ret = t4_load_fw(adap, fw_data, size); if (ret < 0) - return ret; + goto out; /* * Older versions of the firmware don't understand the new @@ -6093,7 +6098,17 @@ int t4_fw_upgrade(struct adapter *adap, * its header flags to see if it advertises the capability. */ reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); - return t4_fw_restart(adap, mbox, reset); + ret = t4_fw_restart(adap, mbox, reset); + + /* Grab potentially new Firmware Device Log parameters so we can see + * how healthy the new Firmware is. It's okay to contact the new + * Firmware for these parameters even though, as far as it's + * concerned, we've never said "HELLO" to it ... + */ + (void)t4_init_devlog_params(adap); +out: + adap->flags |= FW_OK; + return ret; } /** Patches currently in stable-queue which might be from arjun(a)chelsio.com are queue-4.4/cxgb4-fw-upgrade-fixes.patch queue-4.4/cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch

6 years, 9 months

1
0
0 0

Patch "cxgb4: fix incorrect cim_la output for T6" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cxgb4: fix incorrect cim_la output for T6 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cxgb4-fix-incorrect-cim_la-output-for-t6.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ganesh Goudar <ganeshgr(a)chelsio.com> Date: Wed, 31 May 2017 19:10:21 +0530 Subject: cxgb4: fix incorrect cim_la output for T6 From: Ganesh Goudar <ganeshgr(a)chelsio.com> [ Upstream commit a97051f4553551d13e586ab3cb6ae13093a44a81 ] take care of UpDbgLaRdPtr[0-3] restriction for T6. Signed-off-by: Ganesh Goudar <ganeshgr(a)chelsio.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -7711,7 +7711,16 @@ int t4_cim_read_la(struct adapter *adap, ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]); if (ret) break; - idx = (idx + 1) & UPDBGLARDPTR_M; + + /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to + * identify the 32-bit portion of the full 312-bit data + */ + if (is_t6(adap->params.chip) && (idx & 0xf) >= 9) + idx = (idx & 0xff0) + 0x10; + else + idx++; + /* address can't exceed 0xfff */ + idx &= UPDBGLARDPTR_M; } restart: if (cfg & UPDBGLAEN_F) { Patches currently in stable-queue which might be from ganeshgr(a)chelsio.com are queue-4.4/cxgb4-fw-upgrade-fixes.patch queue-4.4/cxgb4-fix-incorrect-cim_la-output-for-t6.patch queue-4.4/cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch

6 years, 9 months

1
0
0 0

Patch "[media] cx25840: fix unchecked return values" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] cx25840: fix unchecked return values to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cx25840-fix-unchecked-return-values.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 10:06:36 -0300 Subject: [media] cx25840: fix unchecked return values From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 35378ce143071c2a6bad4b59a000e9b9f8f6ea67 ] In functions cx25840_initialize(), cx231xx_initialize(), and cx23885_initialize(), the return value of create_singlethread_workqueue() is used without validation. This may result in NULL dereference and cause kernel crash. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/i2c/cx25840/cx25840-core.c | 36 ++++++++++++++++++------------- 1 file changed, 21 insertions(+), 15 deletions(-) --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -420,11 +420,13 @@ static void cx25840_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } /* 6. */ cx25840_write(client, 0x115, 0x8c); @@ -631,11 +633,13 @@ static void cx23885_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } /* Call the cx23888 specific std setup func, we no longer rely on * the generic cx24840 func. @@ -746,11 +750,13 @@ static void cx231xx_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } cx25840_std_setup(client); Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.4/cx25840-fix-unchecked-return-values.patch queue-4.4/usb-dwc3-keystone-check-return-value.patch queue-4.4/rtc-snvs-fix-an-incorrect-check-of-return-value.patch

6 years, 9 months

1
0
0 0

Patch "cpuidle: dt: Add missing 'of_node_put()'" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpuidle: dt: Add missing 'of_node_put()' to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpuidle-dt-add-missing-of_node_put.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> Date: Sun, 11 Jun 2017 14:28:54 +0200 Subject: cpuidle: dt: Add missing 'of_node_put()' From: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> [ Upstream commit b2cdd8e1b54849477a32d820acc2e87828a38f3d ] 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da074fd (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpuidle/dt_idle_states.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -174,8 +174,10 @@ int dt_init_idle_driver(struct cpuidle_d if (!state_node) break; - if (!of_device_is_available(state_node)) + if (!of_device_is_available(state_node)) { + of_node_put(state_node); continue; + } if (!idle_state_valid(state_node, i, cpumask)) { pr_warn("%s idle state not valid, bailing out\n", Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.4/cpuidle-dt-add-missing-of_node_put.patch queue-4.4/edac-mv64x60-fix-an-error-handling-path.patch queue-4.4/smb2-fix-share-type-handling.patch queue-4.4/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

6 years, 9 months

1
0
0 0

Patch "clk: scpi: fix return type of __scpi_dvfs_round_rate" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: scpi: fix return type of __scpi_dvfs_round_rate to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-scpi-fix-return-type-of-__scpi_dvfs_round_rate.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Sudeep Holla <sudeep.holla(a)arm.com> Date: Thu, 18 May 2017 17:19:28 +0100 Subject: clk: scpi: fix return type of __scpi_dvfs_round_rate From: Sudeep Holla <sudeep.holla(a)arm.com> [ Upstream commit 7374aec95636ca39409545eba4ef5ff3125c2346 ] The frequencies above the maximum value of signed integer(i.e. 2^31 -1) will overflow with the current code. This patch fixes the return type of __scpi_dvfs_round_rate from 'int' to 'unsigned long'. Fixes: cd52c2a4b5c4 ("clk: add support for clocks provided by SCP(System Control Processor)") Cc: Michael Turquette <mturquette(a)baylibre.com> Cc: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla(a)arm.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-scpi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/clk/clk-scpi.c +++ b/drivers/clk/clk-scpi.c @@ -71,15 +71,15 @@ static const struct clk_ops scpi_clk_ops }; /* find closest match to given frequency in OPP table */ -static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) +static long __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) { int idx; - u32 fmin = 0, fmax = ~0, ftmp; + unsigned long fmin = 0, fmax = ~0, ftmp; const struct scpi_opp *opp = clk->info->opps; for (idx = 0; idx < clk->info->count; idx++, opp++) { ftmp = opp->freq; - if (ftmp >= (u32)rate) { + if (ftmp >= rate) { if (ftmp <= fmax) fmax = ftmp; break; Patches currently in stable-queue which might be from sudeep.holla(a)arm.com are queue-4.4/clk-scpi-fix-return-type-of-__scpi_dvfs_round_rate.patch

6 years, 9 months

1
0
0 0

Patch "clk: Fix __set_clk_rates error print-string" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: Fix __set_clk_rates error print-string to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-fix-__set_clk_rates-error-print-string.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Date: Mon, 15 May 2017 11:58:59 +0100 Subject: clk: Fix __set_clk_rates error print-string From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> [ Upstream commit ee177c5d6369f8e5d3e4793dce501cf4431313a1 ] When failing to set a clock the printout emitted is incorrect. "u32 rate" is formatted as %d and should be %u whereas "unsigned long clk_set_rate()" is formatted as %ld and should be %lu as per Documentation/printk-formats.txt. Fixes: 2885c3b2a3da ("clk: Show correct information when fail to set clock rate") Signed-off-by: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/clk-conf.c +++ b/drivers/clk/clk-conf.c @@ -106,7 +106,7 @@ static int __set_clk_rates(struct device rc = clk_set_rate(clk, rate); if (rc < 0) - pr_err("clk: couldn't set %s clk rate to %d (%d), current rate: %ld\n", + pr_err("clk: couldn't set %s clk rate to %u (%d), current rate: %lu\n", __clk_get_name(clk), rate, rc, clk_get_rate(clk)); clk_put(clk); Patches currently in stable-queue which might be from pure.logic(a)nexus-software.ie are queue-4.4/clk-fix-__set_clk_rates-error-print-string.patch

6 years, 9 months

1
0
0 0

Patch "CIFS: silence lockdep splat in cifs_relock_file()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled CIFS: silence lockdep splat in cifs_relock_file() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cifs-silence-lockdep-splat-in-cifs_relock_file.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Rabin Vincent <rabinv(a)axis.com> Date: Wed, 3 May 2017 17:17:21 +0200 Subject: CIFS: silence lockdep splat in cifs_relock_file() From: Rabin Vincent <rabinv(a)axis.com> [ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ] cifs_relock_file() can perform a down_write() on the inode's lock_sem even though it was already performed in cifs_strict_readv(). Lockdep complains about this. AFAICS, there is no problem here, and lockdep just needs to be told that this nesting is OK. ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #20 Not tainted --------------------------------------------- cat/701 is trying to acquire lock: (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00 but task is already holding lock: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&cifsi->lock_sem); lock(&cifsi->lock_sem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by cat/701: #0: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 stack backtrace: CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20 Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? trace_hardirqs_on_thunk+0x1a/0x1c ? preempt_schedule_irq+0x6b/0x80 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? cifs_reopen_file+0x7a7/0xc00 down_read+0x2d/0x70 ? cifs_reopen_file+0x7a7/0xc00 cifs_reopen_file+0x7a7/0xc00 ? printk+0x43/0x4b cifs_readpage_worker+0x327/0x8a0 cifs_readpage+0x8c/0x2a0 generic_file_read_iter+0x692/0xd00 cifs_strict_readv+0x29f/0x310 generic_file_splice_read+0x11c/0x1c0 do_splice_to+0xa5/0xc0 splice_direct_to_actor+0xfa/0x350 ? generic_pipe_buf_nosteal+0x10/0x10 do_splice_direct+0xb5/0xe0 do_sendfile+0x278/0x3a0 SyS_sendfile64+0xc4/0xe0 entry_SYSCALL_64_fastpath+0x1f/0xbe Signed-off-by: Rabin Vincent <rabinv(a)axis.com> Acked-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -589,7 +589,7 @@ cifs_relock_file(struct cifsFileInfo *cf struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); int rc = 0; - down_read(&cinode->lock_sem); + down_read_nested(&cinode->lock_sem, SINGLE_DEPTH_NESTING); if (cinode->can_cache_brlcks) { /* can cache locks - no need to relock */ up_read(&cinode->lock_sem); Patches currently in stable-queue which might be from rabinv(a)axis.com are queue-4.4/cifs-silence-lockdep-splat-in-cifs_relock_file.patch

6 years, 9 months

1
0
0 0

Patch "cfg80211: make RATE_INFO_BW_20 the default" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cfg80211: make RATE_INFO_BW_20 the default to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cfg80211-make-rate_info_bw_20-the-default.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Johannes Berg <johannes.berg(a)intel.com> Date: Thu, 4 May 2017 08:42:30 +0200 Subject: cfg80211: make RATE_INFO_BW_20 the default From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ] Due to the way I did the RX bitrate conversions in mac80211 with spatch, going setting flags to setting the value, many drivers now don't set the bandwidth value for 20 MHz, since with the flags it wasn't necessary to (there was no 20 MHz flag, only the others.) Rather than go through and try to fix up all the drivers, instead renumber the enum so that 20 MHz, which is the typical bandwidth, actually has the value 0, making those drivers all work again. If VHT was hit used with a driver not reporting it, e.g. iwlmvm, this manifested in hitting the bandwidth warning in cfg80211_calculate_bitrate_vht(). Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org> Tested-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -933,9 +933,9 @@ enum rate_info_flags { * @RATE_INFO_BW_160: 160 MHz bandwidth */ enum rate_info_bw { + RATE_INFO_BW_20 = 0, RATE_INFO_BW_5, RATE_INFO_BW_10, - RATE_INFO_BW_20, RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, Patches currently in stable-queue which might be from johannes.berg(a)intel.com are queue-4.4/cfg80211-make-rate_info_bw_20-the-default.patch queue-4.4/mac80211-bail-out-from-prep_connection-if-a-reconfig-is-ongoing.patch

6 years, 9 months

1
0
0 0

Patch "bus: brcmstb_gisb: Use register offsets with writes too" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: Use register offsets with writes too to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:09 -0700 Subject: bus: brcmstb_gisb: Use register offsets with writes too From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 856c7ccb9ce7a061f04bdf586f649cb93654e294 ] This commit corrects the bug introduced in commit f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -123,9 +123,9 @@ static void gisb_write(struct brcmstb_gi return; if (gdev->big_endian) - iowrite32be(val, gdev->base + reg); + iowrite32be(val, gdev->base + offset); else - iowrite32(val, gdev->base + reg); + iowrite32(val, gdev->base + offset); } static ssize_t gisb_arb_get_timeout(struct device *dev, Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.4/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.4/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

6 years, 9 months

1
0
0 0

Patch "bus: brcmstb_gisb: correct support for 64-bit address output" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: correct support for 64-bit address output to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:10 -0700 Subject: bus: brcmstb_gisb: correct support for 64-bit address output From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ] The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -33,8 +33,6 @@ #define ARB_ERR_CAP_CLEAR (1 << 0) #define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) #define ARB_ERR_CAP_STATUS_TEA (1 << 11) -#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2) -#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c #define ARB_ERR_CAP_STATUS_WRITE (1 << 1) #define ARB_ERR_CAP_STATUS_VALID (1 << 0) @@ -43,7 +41,6 @@ enum { ARB_ERR_CAP_CLR, ARB_ERR_CAP_HI_ADDR, ARB_ERR_CAP_ADDR, - ARB_ERR_CAP_DATA, ARB_ERR_CAP_STATUS, ARB_ERR_CAP_MASTER, }; @@ -53,7 +50,6 @@ static const int gisb_offsets_bcm7038[] [ARB_ERR_CAP_CLR] = 0x0c4, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0c8, - [ARB_ERR_CAP_DATA] = 0x0cc, [ARB_ERR_CAP_STATUS] = 0x0d0, [ARB_ERR_CAP_MASTER] = -1, }; @@ -63,7 +59,6 @@ static const int gisb_offsets_bcm7400[] [ARB_ERR_CAP_CLR] = 0x0c8, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0cc, - [ARB_ERR_CAP_DATA] = 0x0d0, [ARB_ERR_CAP_STATUS] = 0x0d4, [ARB_ERR_CAP_MASTER] = 0x0d8, }; @@ -73,7 +68,6 @@ static const int gisb_offsets_bcm7435[] [ARB_ERR_CAP_CLR] = 0x168, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x16c, - [ARB_ERR_CAP_DATA] = 0x170, [ARB_ERR_CAP_STATUS] = 0x174, [ARB_ERR_CAP_MASTER] = 0x178, }; @@ -83,7 +77,6 @@ static const int gisb_offsets_bcm7445[] [ARB_ERR_CAP_CLR] = 0x7e4, [ARB_ERR_CAP_HI_ADDR] = 0x7e8, [ARB_ERR_CAP_ADDR] = 0x7ec, - [ARB_ERR_CAP_DATA] = 0x7f0, [ARB_ERR_CAP_STATUS] = 0x7f4, [ARB_ERR_CAP_MASTER] = 0x7f8, }; @@ -105,9 +98,13 @@ static u32 gisb_read(struct brcmstb_gisb { int offset = gdev->gisb_offsets[reg]; - /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ - if (offset == -1) - return 1; + if (offset < 0) { + /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ + if (reg == ARB_ERR_CAP_MASTER) + return 1; + else + return 0; + } if (gdev->big_endian) return ioread32be(gdev->base + offset); @@ -115,6 +112,16 @@ static u32 gisb_read(struct brcmstb_gisb return ioread32(gdev->base + offset); } +static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev) +{ + u64 value; + + value = gisb_read(gdev, ARB_ERR_CAP_ADDR); + value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; + + return value; +} + static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg) { int offset = gdev->gisb_offsets[reg]; @@ -181,7 +188,7 @@ static int brcmstb_gisb_arb_decode_addr( const char *reason) { u32 cap_status; - unsigned long arb_addr; + u64 arb_addr; u32 master; const char *m_name; char m_fmt[11]; @@ -193,10 +200,7 @@ static int brcmstb_gisb_arb_decode_addr( return 1; /* Read the address and master */ - arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff; -#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT)) - arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; -#endif + arb_addr = gisb_read_address(gdev); master = gisb_read(gdev, ARB_ERR_CAP_MASTER); m_name = brcmstb_gisb_master_to_str(gdev, master); @@ -205,7 +209,7 @@ static int brcmstb_gisb_arb_decode_addr( m_name = m_fmt; } - pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n", + pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n", __func__, reason, arb_addr, cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R', cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "", Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.4/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.4/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018