April 2018 - Linux-stable-mirror

Patch "btrfs: fix incorrect error return ret being passed to mapping_set_error" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled btrfs: fix incorrect error return ret being passed to mapping_set_error to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 9 May 2017 18:14:01 +0100 Subject: btrfs: fix incorrect error return ret being passed to mapping_set_error From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit bff5baf8aa37a97293725a16c03f49872249c07e ] The setting of return code ret should be based on the error code passed into function end_extent_writepage and not on ret. Thanks to Liu Bo for spotting this mistake in the original fix I submitted. Detected by CoverityScan, CID#1414312 ("Logically dead code") Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2534,7 +2534,7 @@ int end_extent_writepage(struct page *pa if (!uptodate) { ClearPageUptodate(page); SetPageError(page); - ret = ret < 0 ? ret : -EIO; + ret = err < 0 ? err : -EIO; mapping_set_error(page->mapping, ret); } return 0; Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.4/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.4/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.4/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.4/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

6 years, 9 months

1
0
0 0

Patch "bonding: Don't update slave->link until ready to commit" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: Don't update slave->link until ready to commit to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-don-t-update-slave-link-until-ready-to-commit.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Nithin Sujir <nsujir(a)tintri.com> Date: Wed, 24 May 2017 19:45:17 -0700 Subject: bonding: Don't update slave->link until ready to commit From: Nithin Sujir <nsujir(a)tintri.com> [ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ] In the loadbalance arp monitoring scheme, when a slave link change is detected, the slave->link is immediately updated and slave_state_changed is set. Later down the function, the rtnl_lock is acquired and the changes are committed, updating the bond link state. However, the acquisition of the rtnl_lock can fail. The next time the monitor runs, since slave->link is already updated, it determines that link is unchanged. This results in the bond link state permanently out of sync with the slave link. This patch modifies bond_loadbalance_arp_mon() to handle link changes identical to bond_ab_arp_{inspect/commit}(). The new link state is maintained in slave->new_link until we're ready to commit at which point it's copied into slave->link. NOTE: miimon_{inspect/commit}() has a more complex state machine requiring the use of the bond_{propose,commit}_link_state() functions which maintains the intermediate state in slave->link_new_state. The arp monitors don't require that. Testing: This bug is very easy to reproduce with the following steps. 1. In a loop, toggle a slave link of a bond slave interface. 2. In a separate loop, do ifconfig up/down of an unrelated interface to create contention for rtnl_lock. Within a few iterations, the bond link goes out of sync with the slave link. Signed-off-by: Nithin Nayak Sujir <nsujir(a)tintri.com> Cc: Mahesh Bandewar <maheshb(a)google.com> Cc: Jay Vosburgh <jay.vosburgh(a)canonical.com> Acked-by: Mahesh Bandewar <maheshb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2555,11 +2555,13 @@ static void bond_loadbalance_arp_mon(str bond_for_each_slave_rcu(bond, slave, iter) { unsigned long trans_start = dev_trans_start(slave->dev); + slave->new_link = BOND_LINK_NOCHANGE; + if (slave->link != BOND_LINK_UP) { if (bond_time_in_interval(bond, trans_start, 1) && bond_time_in_interval(bond, slave->last_rx, 1)) { - slave->link = BOND_LINK_UP; + slave->new_link = BOND_LINK_UP; slave_state_changed = 1; /* primary_slave has no meaning in round-robin @@ -2586,7 +2588,7 @@ static void bond_loadbalance_arp_mon(str if (!bond_time_in_interval(bond, trans_start, 2) || !bond_time_in_interval(bond, slave->last_rx, 2)) { - slave->link = BOND_LINK_DOWN; + slave->new_link = BOND_LINK_DOWN; slave_state_changed = 1; if (slave->link_failure_count < UINT_MAX) @@ -2617,6 +2619,11 @@ static void bond_loadbalance_arp_mon(str if (!rtnl_trylock()) goto re_arm; + bond_for_each_slave(bond, slave, iter) { + if (slave->new_link != BOND_LINK_NOCHANGE) + slave->link = slave->new_link; + } + if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) Patches currently in stable-queue which might be from nsujir(a)tintri.com are queue-4.4/bonding-don-t-update-slave-link-until-ready-to-commit.patch

6 years, 9 months

1
0
0 0

Patch "bnx2x: Allow vfs to disable txvlan offload" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Allow vfs to disable txvlan offload to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-allow-vfs-to-disable-txvlan-offload.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> Date: Fri, 9 Jun 2017 17:17:01 +0300 Subject: bnx2x: Allow vfs to disable txvlan offload From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> [ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3943,15 +3943,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ + u16 vlan_tci = 0; #ifndef BNX2X_STOP_ON_ERROR - if (IS_VF(bp)) + if (IS_VF(bp)) { #endif - tx_start_bd->vlan_or_ethertype = - cpu_to_le16(ntohs(eth->h_proto)); + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } #ifndef BNX2X_STOP_ON_ERROR - else + } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } #endif } Patches currently in stable-queue which might be from Yuval.Mintz(a)cavium.com are queue-4.4/bnx2x-allow-vfs-to-disable-txvlan-offload.patch

6 years, 9 months

1
0
0 0

Patch "bna: Avoid reading past end of buffer" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bna: Avoid reading past end of buffer to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bna-avoid-reading-past-end-of-buffer.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 15:25:32 -0700 Subject: bna: Avoid reading past end of buffer From: Kees Cook <keescook(a)chromium.org> [ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay(a)gmail.com> Signed-off-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -2845,7 +2845,7 @@ bfa_ioc_get_adapter_optrom_ver(struct bf static void bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc, char *manufacturer) { - memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); + strncpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); } static void Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.4/qlge-avoid-reading-past-end-of-buffer.patch queue-4.4/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.4/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.4/bna-avoid-reading-past-end-of-buffer.patch

6 years, 9 months

1
0
0 0

Patch "Bluetooth: Send HCI Set Event Mask Page 2 command only when needed" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: Send HCI Set Event Mask Page 2 command only when needed to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcel Holtmann <marcel(a)holtmann.org> Date: Fri, 9 Jun 2017 18:43:56 +0200 Subject: Bluetooth: Send HCI Set Event Mask Page 2 command only when needed From: Marcel Holtmann <marcel(a)holtmann.org> [ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Reported-by: Sedat Dilek <sedat.dilek(a)gmail.com> Tested-by: Sedat Dilek <sedat.dilek(a)gmail.com> Signed-off-by: Szymon Janc <szymon.janc(a)codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/hci_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -716,6 +716,7 @@ static void hci_set_event_mask_page_2(st { struct hci_dev *hdev = req->hdev; u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; /* If Connectionless Slave Broadcast master role is supported * enable all necessary events for it. @@ -725,6 +726,7 @@ static void hci_set_event_mask_page_2(st events[1] |= 0x80; /* Synchronization Train Complete */ events[2] |= 0x10; /* Slave Page Response Timeout */ events[2] |= 0x20; /* CSB Channel Map Change */ + changed = true; } /* If Connectionless Slave Broadcast slave role is supported @@ -735,13 +737,24 @@ static void hci_set_event_mask_page_2(st events[2] |= 0x02; /* CSB Receive */ events[2] |= 0x04; /* CSB Timeout */ events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; } /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { events[2] |= 0x80; + changed = true; + } - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (changed) + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events); } static void hci_init3_req(struct hci_request *req, unsigned long opt) Patches currently in stable-queue which might be from marcel(a)holtmann.org are queue-4.4/bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch queue-4.4/net-ieee802154-fix-net_device-reference-release-too-early.patch

6 years, 9 months

1
0
0 0

Patch "block: fix an error code in add_partition()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled block: fix an error code in add_partition() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: block-fix-an-error-code-in-add_partition.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 23 May 2017 17:28:36 +0300 Subject: block: fix an error code in add_partition() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ] We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/partition-generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -309,8 +309,10 @@ struct hd_struct *add_partition(struct g if (info) { struct partition_meta_info *pinfo = alloc_part_info(disk); - if (!pinfo) + if (!pinfo) { + err = -ENOMEM; goto out_free_stats; + } memcpy(pinfo, info, sizeof(*info)); p->info = pinfo; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/block-fix-an-error-code-in-add_partition.patch queue-4.4/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.4/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.4/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.4/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.4/libceph-null-deref-on-crush_decode-error-path.patch

6 years, 9 months

1
0
0 0

Patch "blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Date: Wed, 10 May 2017 08:54:11 -0500 Subject: blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> [ Upstream commit f36ea50ca0043e7b1204feaf1d2ba6bd68c08d36 ] When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1252,13 +1252,13 @@ static blk_qc_t blk_mq_make_request(stru blk_queue_bounce(q, &bio); + blk_queue_split(q, &bio, q->bio_split); + if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) { bio_io_error(bio); return BLK_QC_T_NONE; } - blk_queue_split(q, &bio, q->bio_split); - if (!is_flush_fua && !blk_queue_nomerges(q) && blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq)) return BLK_QC_T_NONE; Patches currently in stable-queue which might be from wenxiong(a)linux.vnet.ibm.com are queue-4.4/blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch

6 years, 9 months

1
0
0 0

Patch "blk-mq: fix kernel oops in blk_mq_tag_idle()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: fix kernel oops in blk_mq_tag_idle() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ming Lei <ming.lei(a)redhat.com> Date: Tue, 9 Jan 2018 21:28:29 +0800 Subject: blk-mq: fix kernel oops in blk_mq_tag_idle() From: Ming Lei <ming.lei(a)redhat.com> [ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by: Zhang Yi <yizhan(a)redhat.com> Tested-by: Zhang Yi <yizhan(a)redhat.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1634,7 +1634,8 @@ static void blk_mq_exit_hctx(struct requ { unsigned flush_start_tag = set->queue_depth; - blk_mq_tag_idle(hctx); + if (blk_mq_hw_queue_mapped(hctx)) + blk_mq_tag_idle(hctx); if (set->ops->exit_request) set->ops->exit_request(set->driver_data, Patches currently in stable-queue which might be from ming.lei(a)redhat.com are queue-4.4/blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch queue-4.4/fix-loop-device-flush-before-configure-v3.patch

6 years, 9 months

1
0
0 0

Patch "bio-integrity: Do not allocate integrity context for bio w/o data" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bio-integrity: Do not allocate integrity context for bio w/o data to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dmitry Monakhov <dmonakhov(a)openvz.org> Date: Wed, 10 May 2017 19:20:44 +0400 Subject: bio-integrity: Do not allocate integrity context for bio w/o data From: Dmitry Monakhov <dmonakhov(a)openvz.org> [ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Dmitry Monakhov <dmonakhov(a)openvz.org> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/bio-integrity.c | 3 +++ 1 file changed, 3 insertions(+) --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -175,6 +175,9 @@ bool bio_integrity_enabled(struct bio *b if (!bio_is_rw(bio)) return false; + if (!bio_sectors(bio)) + return false; + /* Already protected? */ if (bio_integrity(bio)) return false; Patches currently in stable-queue which might be from dmonakhov(a)openvz.org are queue-4.4/bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch

6 years, 9 months

1
0
0 0

Patch "bcache: stop writeback thread after detaching" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: stop writeback thread after detaching to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-stop-writeback-thread-after-detaching.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:19 -0800 Subject: bcache: stop writeback thread after detaching From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/super.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -890,6 +890,12 @@ static void cached_dev_detach_finish(str mutex_lock(&bch_register_lock); + cancel_delayed_work_sync(&dc->writeback_rate_update); + if (!IS_ERR_OR_NULL(dc->writeback_thread)) { + kthread_stop(dc->writeback_thread); + dc->writeback_thread = NULL; + } + memset(&dc->sb.set_uuid, 0, 16); SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE); Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.4/bcache-segregate-flash-only-volume-write-streams.patch queue-4.4/bcache-stop-writeback-thread-after-detaching.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018