- Linux-kselftest-mirror - lists.linaro.org

[RFC PATCH 0/2] kunit: Support redirecting function calls

by David Gow

When writing tests, it'd often be very useful to be able to intercept calls to a function in the code being tested and replace it with a test-specific stub. This has always been an obviously missing piece of KUnit, and the solutions always involve some tradeoffs with cleanliness, performance, or impact on non-test code. See the folowing document for some of the challenges: https://kunit.dev/mocking.html This series consists of two prototype patches which add support for this sort of redirection to KUnit tests: 1: static_stub: Any function which might want to be intercepted adds a call to a macro which checks if a test has redirected calls to it, and calls the corresponding replacement. 2: ftrace_stub: Functions are intercepted using ftrace and livepatch. This doesn't require adding a new prologue to each function being replaced, but does have more dependencies (which restricts it to a small number of architectures, not including UML), and doesn't work well with inline functions. The API for both implementations is very similar, so it should be easy to migrate from one to the other if necessary. Both of these implementations restrict the redirection to the test context: it is automatically undone after the KUnit test completes, and does not affect calls in other threads. If CONFIG_KUNIT is not enabled, there should be no overhead in either implementation. Does either (or both) of these features sound useful, and is this sort-of API the right model? (Personally, I think there's a reasonable scope for both.) Is anything obviously missing or wrong? Do the names, descriptions etc. make any sense? Note that these patches are definitely still at the "prototype" level, and things like error-handling, documentation, and testing are still pretty sparse. There is also quite a bit of room for optimisation. These'll all be improved for v1 if the concept seems good. Cheers, -- David Daniel Latypov (1): kunit: expose ftrace-based API for stubbing out functions during tests David Gow (1): kunit: Expose 'static stub' API to redirect functions include/kunit/ftrace_stub.h | 84 +++++++++++++++++ include/kunit/static_stub.h | 106 +++++++++++++++++++++ lib/kunit/Kconfig | 11 +++ lib/kunit/Makefile | 5 + lib/kunit/ftrace_stub.c | 138 ++++++++++++++++++++++++++++ lib/kunit/kunit-example-test.c | 64 +++++++++++++ lib/kunit/static_stub.c | 125 +++++++++++++++++++++++++ lib/kunit/stubs_example.kunitconfig | 11 +++ 8 files changed, 544 insertions(+) create mode 100644 include/kunit/ftrace_stub.h create mode 100644 include/kunit/static_stub.h create mode 100644 lib/kunit/ftrace_stub.c create mode 100644 lib/kunit/static_stub.c create mode 100644 lib/kunit/stubs_example.kunitconfig -- 2.35.1.894.gb6a874cedc-goog

3 years, 6 months

5
14
0 0

[PATCH] kselftest/arm64: Fix ABI header directory location

by Mark Brown

Currently the arm64 kselftests attempt to locate the ABI headers using custom logic which doesn't work correctly in the case of out of tree builds if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with the appropriate flags we can simply remove the custom logic and use that instead. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- This fix is required to get us able to run the arm64 kselftests in KernelCI, it does out of tree kselftest builds triggering the issue especially in conjunction with the addition of the new definitions for SME. tools/testing/selftests/arm64/Makefile | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile index 1e8d9a8f59df..9460cbe81bcc 100644 --- a/tools/testing/selftests/arm64/Makefile +++ b/tools/testing/selftests/arm64/Makefile @@ -17,16 +17,7 @@ top_srcdir = $(realpath ../../../../) # Additional include paths needed by kselftest.h and local headers CFLAGS += -I$(top_srcdir)/tools/testing/selftests/ -# Guessing where the Kernel headers could have been installed -# depending on ENV config -ifeq ($(KBUILD_OUTPUT),) -khdr_dir = $(top_srcdir)/usr/include -else -# the KSFT preferred location when KBUILD_OUTPUT is set -khdr_dir = $(KBUILD_OUTPUT)/kselftest/usr/include -endif - -CFLAGS += -I$(khdr_dir) +CFLAGS += $(KHDR_INCLUDES) export CFLAGS export top_srcdir -- 2.30.2

3 years, 6 months

2
2
0 0

[PATCH][next] selftests/seccomp: Fix spelling mistake "Coud" -> "Could"

by Colin Ian King

There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 29c973f606b2..136df5b76319 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -4320,7 +4320,7 @@ static ssize_t get_nth(struct __test_metadata *_metadata, const char *path, f = fopen(path, "r"); ASSERT_NE(f, NULL) { - TH_LOG("Coud not open %s: %s", path, strerror(errno)); + TH_LOG("Could not open %s: %s", path, strerror(errno)); } for (i = 0; i < position; i++) { -- 2.35.1

3 years, 6 months

2
1
0 0

[PATCH] selftests: mqueue: fix all errors

by Sebin Sebastian

All errors and styling issues were fixed. Signed-off-by: Sebin Sebastian <mailmesebin00(a)gmail.com> --- .../testing/selftests/mqueue/mq_open_tests.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/mqueue/mq_open_tests.c b/tools/testing/selftests/mqueue/mq_open_tests.c index 9403ac01ba11..c3cb40eae1e9 100644 --- a/tools/testing/selftests/mqueue/mq_open_tests.c +++ b/tools/testing/selftests/mqueue/mq_open_tests.c @@ -59,12 +59,12 @@ char *default_queue_path = "/test1"; mqd_t queue = -1; static inline void __set(FILE *stream, int value, char *err_msg); -void shutdown(int exit_val, char *err_cause, int line_no); + void shutdown(int exit_val, char *err_cause, int line_no); static inline int get(FILE *stream); static inline void set(FILE *stream, int value); static inline void getr(int type, struct rlimit *rlim); static inline void setr(int type, struct rlimit *rlim); -void validate_current_settings(); +static void validate_current_settings(void); static inline void test_queue(struct mq_attr *attr, struct mq_attr *result); static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result); @@ -78,7 +78,7 @@ static inline void __set(FILE *stream, int value, char *err_msg) void shutdown(int exit_val, char *err_cause, int line_no) { - static int in_shutdown = 0; + static int in_shutdown; /* In case we get called recursively by a set() call below */ if (in_shutdown++) @@ -118,6 +118,7 @@ void shutdown(int exit_val, char *err_cause, int line_no) static inline int get(FILE *stream) { int value; + rewind(stream); if (fscanf(stream, "%d", &value) != 1) shutdown(4, "Error reading /proc entry", __LINE__ - 1); @@ -150,7 +151,7 @@ static inline void setr(int type, struct rlimit *rlim) shutdown(7, "setrlimit()", __LINE__ - 1); } -void validate_current_settings() +void validate_current_settings(void) { int rlim_needed; @@ -202,7 +203,9 @@ static inline void test_queue(struct mq_attr *attr, struct mq_attr *result) int flags = O_RDWR | O_EXCL | O_CREAT; int perms = DEFFILEMODE; - if ((queue = mq_open(queue_path, flags, perms, attr)) == -1) + queue = mq_open(queue_path, flags, perms, attr); + + if ((queue == -1)) shutdown(1, "mq_open()", __LINE__); if (mq_getattr(queue, result)) shutdown(1, "mq_getattr()", __LINE__); @@ -224,7 +227,9 @@ static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result) int flags = O_RDWR | O_EXCL | O_CREAT; int perms = DEFFILEMODE; - if ((queue = mq_open(queue_path, flags, perms, attr)) == -1) + queue = mq_open(queue_path, flags, perms, attr); + + if (queue == -1) return 0; if (mq_getattr(queue, result)) shutdown(1, "mq_getattr()", __LINE__); @@ -498,5 +503,5 @@ int main(int argc, char *argv[]) printf("Queue open with total size > 2GB when euid = 99 " "failed:\t\t\tPASS\n"); - shutdown(0,"",0); + shutdown(0, "", 0); } -- 2.25.1

3 years, 6 months

2
1
0 0

[PATCH v10 0/8] cgroup/cpuset: Major cpu partition code restructuring

by Waiman Long

v10: - Relax constraints for changes made to "cpuset.cpus" and "cpuset.cpus.partition" as suggested. Now almost all changes are allowed. v9: - Add a new patch 1 to remove the child cpuset restriction on parent's "cpuset.cpus". - Relax initial root partition entry limitation to allow cpuset.cpus to overlap that of parent's. - An "isolated invalid" displayed type is added to cpuset.cpus.partition. - Resetting partition root to "member" will leave child partition root as invalid. - Update documentation and test accordingly. v8: - Reorganize the patch series and rationalize the features and constraints of a partition. - Update patch descriptions and documentation accordingly. This patchset include the following enhancements to the cpuset v2 partition code. 1) Allow partitions that have no task to have empty effective cpus. 2) Relax the constraints on what changes are allowed in cpuset.cpus and cpuset.cpus.partition. However, the partition remain invalid until the constraints of a valid partition root is satisfied. 3) Add a new "isolated" partition type for partitions with no load balancing which is available in v1 but not yet in v2. 4) Allow the reading of cpuset.cpus.partition to include a reason string as to why the partition remain invalid. In addition, the cgroup-v2.rst documentation file is updated and a self test is added to verify the correctness the partition code. Waiman Long (8): cgroup/cpuset: Add top_cpuset check in update_tasks_cpumask() cgroup/cpuset: Miscellaneous cleanups & add helper functions cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective cgroup/cpuset: Relax constraints to partition & cpus changes cgroup/cpuset: Add a new isolated cpus.partition type cgroup/cpuset: Show invalid partition reason string cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst kselftest/cgroup: Add cpuset v2 partition root state test Documentation/admin-guide/cgroup-v2.rst | 145 ++-- kernel/cgroup/cpuset.c | 712 +++++++++++------- tools/testing/selftests/cgroup/Makefile | 5 +- .../selftests/cgroup/test_cpuset_prs.sh | 674 +++++++++++++++++ tools/testing/selftests/cgroup/wait_inotify.c | 87 +++ 5 files changed, 1295 insertions(+), 328 deletions(-) create mode 100755 tools/testing/selftests/cgroup/test_cpuset_prs.sh create mode 100644 tools/testing/selftests/cgroup/wait_inotify.c -- 2.27.0

3 years, 6 months

3
14
0 0

[PATCH net-next] selftests: forwarding: add basic QoS classification test for Ocelot switches

by Vladimir Oltean

Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for Ocelot switches. Advanced QoS classification using tc filters is covered by tc_flower_chains.sh in the same directory. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> --- .../selftests/drivers/net/ocelot/basic_qos.sh | 253 ++++++++++++++++++ 1 file changed, 253 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/basic_qos.sh diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh new file mode 100755 index 000000000000..c51c83421c61 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh @@ -0,0 +1,253 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 NXP + +# The script is mostly generic, with the exception of the +# ethtool per-TC counter names ("rx_green_prio_${tc}") + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h1_vlan_create() +{ + local vid=$1 + + vlan_create $h1 $vid + simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + ip link set $h1.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h1_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + vlan_destroy $h1 $vid +} + +h2_vlan_create() +{ + local vid=$1 + + vlan_create $h2 $vid + simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + ip link set $h2.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h2_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + vlan_destroy $h2 $vid +} + +vlans_prepare() +{ + h1_vlan_create 100 + h2_vlan_create 100 + + tc qdisc add dev ${h1}.100 clsact + tc filter add dev ${h1}.100 egress protocol ipv4 \ + flower ip_proto icmp action skbedit priority 3 + tc filter add dev ${h1}.100 egress protocol ipv6 \ + flower ip_proto icmpv6 action skbedit priority 3 +} + +vlans_destroy() +{ + tc qdisc del dev ${h1}.100 clsact + + h1_vlan_destroy 100 + h2_vlan_destroy 100 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up +} + +switch_destroy() +{ + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +dscp_cs_to_tos() +{ + local dscp_cs=$1 + + # https://datatracker.ietf.org/doc/html/rfc2474 + # 4.2.2.1 The Class Selector Codepoints + echo $((${dscp_cs} << 5)) +} + +run_test() +{ + local test_name=$1; shift + local if_name=$1; shift + local tc=$1; shift + local tos=$1; shift + local counter_name="rx_green_prio_${tc}" + local ipv4_before + local ipv4_after + local ipv6_before + local ipv6_after + + ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV4 "-Q ${tos}" + ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv4 ${test_name}" + + ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV6 "-Q ${tos}" + ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv6 ${test_name}" +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig=$(port_default_prio_get ${swp1}) + local dmac=$(mac_get ${h2}) + + dcb app replace dev ${swp1} default-prio 5 + + run_test "Port-default QoS classification" ${h1} 5 0 + + dcb app replace dev ${swp1} default-prio ${orig} +} + +test_vlan_pcp() +{ + vlans_prepare + + run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0 + + vlans_destroy +} + +test_ip_dscp() +{ + local port_default=$(port_default_prio_get ${swp1}) + local tos=$(dscp_cs_to_tos 4) + + dcb app add dev ${swp1} dscp-prio CS4:4 + run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos} + dcb app del dev ${swp1} dscp-prio CS4:4 + + vlans_prepare + run_test "Untrusted DSCP QoS classification follows VLAN PCP" \ + ${h1}.100 3 ${tos} + vlans_destroy + + run_test "Untrusted DSCP QoS classification follows port default" \ + ${h1} ${port_default} ${tos} +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_vlan_pcp + test_ip_dscp +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS -- 2.25.1

3 years, 6 months

2
1
0 0

[PATCH v5 0/4] memcg: introduce per-memcg proactive reclaim

by Yosry Ahmed

This patch series adds a memory.reclaim proactive reclaim interface. The rationale behind the interface and how it works are in the first patch. --- Changes in V5: - Fixed comment formating and added Co-developed-by in patch 1. - Modified selftest to work if swap is enabled or not, and retry multiple times to wait for background allocation before failing with a clear message. Changes in V4: mm/memcontrol.c: - Return -EINTR on signal_pending(). - On the final retry, drain percpu lru caches hoping that it might introduce some evictable pages for reclaim. - Simplified the retry loop as suggested by Dan Schatzberg. selftests: - Always return -errno on failure from cg_write() (whether open() or write() fail), also update cg_read() and read_text() to return -errno as well for consistency. Also make sure to correctly check that the whole buffer was written in cg_write(). - Added a maximum number of retries for the reclaim selftest. Changes in V3: - Fix cg_write() (in patch 2) to properly return -1 if open() fails and not fail if len == errno. - Remove debug printf() in patch 3. Changes in V2: - Add the interface to root as well. - Added a selftest. - Documented the interface as a nested-keyed interface, which makes adding optional arguments in the future easier (see doc updates in the first patch). - Modified the commit message to reflect changes and added a timeout argument as a suggested possible extension - Return -EAGAIN if the kernel fails to reclaim the full requested amount. --- Shakeel Butt (1): memcg: introduce per-memcg reclaim interface Yosry Ahmed (3): selftests: cgroup: return -errno from cg_read()/cg_write() on failure selftests: cgroup: fix alloc_anon_noexit() instantly freeing memory selftests: cgroup: add a selftest for memory.reclaim Documentation/admin-guide/cgroup-v2.rst | 21 ++++ mm/memcontrol.c | 45 +++++++ tools/testing/selftests/cgroup/cgroup_util.c | 44 +++---- .../selftests/cgroup/test_memcontrol.c | 114 +++++++++++++++++- 4 files changed, 197 insertions(+), 27 deletions(-) -- 2.36.0.rc2.479.g8af0fa9b8e-goog

3 years, 6 months

5
12
0 0

[PATCH bpf-next v8 0/5] New BPF helpers to accelerate synproxy

by Maxim Mikityanskiy

The first patch of this series is a documentation fix. The second patch allows BPF helpers to accept memory regions of fixed size without doing runtime size checks. The two next patches add new functionality that allows XDP to accelerate iptables synproxy. v1 of this series [1] used to include a patch that exposed conntrack lookup to BPF using stable helpers. It was superseded by series [2] by Kumar Kartikeya Dwivedi, which implements this functionality using unstable helpers. The third patch adds new helpers to issue and check SYN cookies without binding to a socket, which is useful in the synproxy scenario. The fourth patch adds a selftest, which includes an XDP program and a userspace control application. The XDP program uses socketless SYN cookie helpers and queries conntrack status instead of socket status. The userspace control application allows to tune parameters of the XDP program. This program also serves as a minimal example of usage of the new functionality. The last patch exposes the new helpers to TC BPF. The draft of the new functionality was presented on Netdev 0x15 [3]. v2 changes: Split into two series, submitted bugfixes to bpf, dropped the conntrack patches, implemented the timestamp cookie in BPF using bpf_loop, dropped the timestamp cookie patch. v3 changes: Moved some patches from bpf to bpf-next, dropped the patch that changed error codes, split the new helpers into IPv4/IPv6, added verifier functionality to accept memory regions of fixed size. v4 changes: Converted the selftest to the test_progs runner. Replaced some deprecated functions in xdp_synproxy userspace helper. v5 changes: Fixed a bug in the selftest. Added questionable functionality to support new helpers in TC BPF, added selftests for it. v6 changes: Wrap the new helpers themselves into #ifdef CONFIG_SYN_COOKIES, replaced fclose with pclose and fixed the MSS for IPv6 in the selftest. v7 changes: Fixed the off-by-one error in indices, changed the section name to "xdp", added missing kernel config options to vmtest in CI. v8 changes: Properly rebased, dropped the first patch (the same change was applied by someone else), updated the cover letter. [1]: https://lore.kernel.org/bpf/20211020095815.GJ28644@breakpoint.cc/t/ [2]: https://lore.kernel.org/bpf/20220114163953.1455836-1-memxor@gmail.com/ [3]: https://netdevconf.info/0x15/session.html?Accelerating-synproxy-with-XDP Maxim Mikityanskiy (5): bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie bpf: Allow helpers to accept pointers with a fixed size bpf: Add helpers to issue and check SYN cookies in XDP bpf: Add selftests for raw syncookie helpers bpf: Allow the new syncookie helpers to work with SKBs include/linux/bpf.h | 10 + include/net/tcp.h | 1 + include/uapi/linux/bpf.h | 88 +- kernel/bpf/verifier.c | 26 +- net/core/filter.c | 128 +++ net/ipv4/tcp_input.c | 3 +- scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 88 +- tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/Makefile | 2 +- .../selftests/bpf/prog_tests/xdp_synproxy.c | 144 +++ .../selftests/bpf/progs/xdp_synproxy_kern.c | 819 ++++++++++++++++++ tools/testing/selftests/bpf/xdp_synproxy.c | 466 ++++++++++ 13 files changed, 1759 insertions(+), 21 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_synproxy.c create mode 100644 tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c create mode 100644 tools/testing/selftests/bpf/xdp_synproxy.c -- 2.30.2

3 years, 6 months

2
7
0 0

2nd Quater puchase request

by ASDA Stores Limited

Dear linux-kselftest We are interested in having some of your hot selling product in our stores and outlets spread all over United Kingdom, Northern Island and Africa. ASDA Stores Limited is one of the highest- ranking Wholesale & Retail outlets in the United Kingdom. We shall furnish our detailed company profile in our next correspondent. However, it would be appreciated if you can send us your catalog through email to learn more about your company's products and wholesale quote. It is hopeful that we can start a viable long-lasting business relationship (partnership) with you. Your prompt response would be delightfully appreciated. Best Wishes Hanes S. Thomas Procurement Office. ASDA Stores Limited Tel: + 44 - 7451271650 WhatsApp: + 44 – 7441440360 Website: www.asda.co.uk

3 years, 6 months

1
0
0 0

[PATCH v4 2/3] selftests/seccomp: Refactor get_proc_stat to split out file reading code

by Sargun Dhillon

This splits up the get_proc_stat function to make it so we can use it as a generic helper to read the nth field from multiple different files, versus replicating the logic in multiple places. Signed-off-by: Sargun Dhillon <sargun(a)sargun.me> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/seccomp/seccomp_bpf.c | 54 +++++++++++++------ 1 file changed, 38 insertions(+), 16 deletions(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index ab340c4759a3..4fb5eda89223 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -4231,32 +4231,54 @@ TEST(user_notification_addfd_rlimit) close(memfd); } -static char get_proc_stat(int pid) +/* + * gen_nth - Get the nth, space separated entry in a file. + * + * Returns the length of the read field. + * Throws error if field is zero-lengthed. + */ +static ssize_t get_nth(struct __test_metadata *_metadata, const char *path, + const unsigned int position, char **entry) { - char proc_path[100] = {0}; char *line = NULL; - size_t len = 0; + unsigned int i; ssize_t nread; - char status; + size_t len = 0; FILE *f; - int i; - snprintf(proc_path, sizeof(proc_path), "/proc/%d/stat", pid); - f = fopen(proc_path, "r"); - if (f == NULL) - ksft_exit_fail_msg("%s - Could not open %s\n", - strerror(errno), proc_path); + f = fopen(path, "r"); + ASSERT_NE(f, NULL) { + TH_LOG("Coud not open %s: %s", path, strerror(errno)); + } - for (i = 0; i < 3; i++) { + for (i = 0; i < position; i++) { nread = getdelim(&line, &len, ' ', f); - if (nread <= 0) - ksft_exit_fail_msg("Failed to read status: %s\n", - strerror(errno)); + ASSERT_GE(nread, 0) { + TH_LOG("Failed to read %d entry in file %s", i, path); + } } + fclose(f); + + ASSERT_GT(nread, 0) { + TH_LOG("Entry in file %s had zero length", path); + } + + *entry = line; + return nread - 1; +} + +/* For a given PID, get the task state (D, R, etc...) */ +static char get_proc_stat(struct __test_metadata *_metadata, pid_t pid) +{ + char proc_path[100] = {0}; + char status; + char *line; + + snprintf(proc_path, sizeof(proc_path), "/proc/%d/stat", pid); + ASSERT_EQ(get_nth(_metadata, proc_path, 3, &line), 1); status = *line; free(line); - fclose(f); return status; } @@ -4317,7 +4339,7 @@ TEST(user_notification_fifo) /* This spins until all of the children are sleeping */ restart_wait: for (i = 0; i < ARRAY_SIZE(pids); i++) { - if (get_proc_stat(pids[i]) != 'S') { + if (get_proc_stat(_metadata, pids[i]) != 'S') { nanosleep(&delay, NULL); goto restart_wait; } -- 2.25.1

3 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror