- Linux-kselftest-mirror - lists.linaro.org

[PATCH] selftests: splice: Adjust for handler fallback removal

by Kees Cook

Some pseudo-filesystems do not have an explicit splice fops since adding commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"), and now will reject attempts to use splice() in those filesystem paths. Reported-by: kernel test robot <rong.a.chen(a)intel.com> Link: https://lore.kernel.org/lkml/202009181443.C2179FB@keescook/ Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Kees Cook <keescook(a)chromium.org> --- .../selftests/splice/short_splice_read.sh | 119 ++++++++++++++---- 1 file changed, 98 insertions(+), 21 deletions(-) diff --git a/tools/testing/selftests/splice/short_splice_read.sh b/tools/testing/selftests/splice/short_splice_read.sh index 7810d3589d9a..22b6c8910b18 100755 --- a/tools/testing/selftests/splice/short_splice_read.sh +++ b/tools/testing/selftests/splice/short_splice_read.sh @@ -1,21 +1,87 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +# +# Test for mishandling of splice() on pseudofilesystems, which should catch +# bugs like 11990a5bd7e5 ("module: Correctly truncate sysfs sections output") +# +# Since splice fallback was removed as part of the set_fs() rework, many of these +# tests expect to fail now. See https://lore.kernel.org/lkml/202009181443.C2179FB@keescook/ set -e +DIR=$(dirname "$0") + ret=0 +expect_success() +{ + title="$1" + shift + + echo "" >&2 + echo "$title ..." >&2 + + set +e + "$@" + rc=$? + set -e + + case "$rc" in + 0) + echo "ok: $title succeeded" >&2 + ;; + 1) + echo "FAIL: $title should work" >&2 + ret=$(( ret + 1 )) + ;; + *) + echo "FAIL: something else went wrong" >&2 + ret=$(( ret + 1 )) + ;; + esac +} + +expect_failure() +{ + title="$1" + shift + + echo "" >&2 + echo "$title ..." >&2 + + set +e + "$@" + rc=$? + set -e + + case "$rc" in + 0) + echo "FAIL: $title unexpectedly worked" >&2 + ret=$(( ret + 1 )) + ;; + 1) + echo "ok: $title correctly failed" >&2 + ;; + *) + echo "FAIL: something else went wrong" >&2 + ret=$(( ret + 1 )) + ;; + esac +} + do_splice() { filename="$1" bytes="$2" expected="$3" + report="$4" - out=$(./splice_read "$filename" "$bytes" | cat) + out=$("$DIR"/splice_read "$filename" "$bytes" | cat) if [ "$out" = "$expected" ] ; then - echo "ok: $filename $bytes" + echo " matched $report" >&2 + return 0 else - echo "FAIL: $filename $bytes" - ret=1 + echo " no match: '$out' vs $report" >&2 + return 1 fi } @@ -23,34 +89,45 @@ test_splice() { filename="$1" + echo " checking $filename ..." >&2 + full=$(cat "$filename") + rc=$? + if [ $rc -ne 0 ] ; then + return 2 + fi + two=$(echo "$full" | grep -m1 . | cut -c-2) # Make sure full splice has the same contents as a standard read. - do_splice "$filename" 4096 "$full" + echo " splicing 4096 bytes ..." >&2 + if ! do_splice "$filename" 4096 "$full" "full read" ; then + return 1 + fi # Make sure a partial splice see the first two characters. - do_splice "$filename" 2 "$two" + echo " splicing 2 bytes ..." >&2 + if ! do_splice "$filename" 2 "$two" "'$two'" ; then + return 1 + fi + + return 0 } -# proc_single_open(), seq_read() -test_splice /proc/$$/limits -# special open, seq_read() -test_splice /proc/$$/comm +### /proc/$pid/ has no splice interface; these should all fail. +expect_failure "proc_single_open(), seq_read() splice" test_splice /proc/$$/limits +expect_failure "special open(), seq_read() splice" test_splice /proc/$$/comm -# proc_handler, proc_dointvec_minmax -test_splice /proc/sys/fs/nr_open -# proc_handler, proc_dostring -test_splice /proc/sys/kernel/modprobe -# proc_handler, special read -test_splice /proc/sys/kernel/version +### /proc/sys/ has a splice interface; these should all succeed. +expect_success "proc_handler: proc_dointvec_minmax() splice" test_splice /proc/sys/fs/nr_open +expect_success "proc_handler: proc_dostring() splice" test_splice /proc/sys/kernel/modprobe +expect_success "proc_handler: special read splice" test_splice /proc/sys/kernel/version +### /sys/ has no splice interface; these should all fail. if ! [ -d /sys/module/test_module/sections ] ; then - modprobe test_module + expect_success "test_module kernel module load" modprobe test_module fi -# kernfs, attr -test_splice /sys/module/test_module/coresize -# kernfs, binattr -test_splice /sys/module/test_module/sections/.init.text +expect_failure "kernfs attr splice" test_splice /sys/module/test_module/coresize +expect_failure "kernfs binattr splice" test_splice /sys/module/test_module/sections/.init.text exit $ret -- 2.25.1

4 years, 3 months

1
0
0 0

[PATCH v2 0/6] kselftest: arm64/mte: Tests for user-space MTE

by Amit Daniel Kachhap

These patch series adds below kselftests to test the user-space support for the ARMv8.5 Memory Tagging Extension present in arm64 tree [1]. This patch series is based on Linux v5.9-rc3. 1) This test-case verifies that the memory allocated by kernel mmap interface can support tagged memory access. It first checks the presence of tags at address[56:59] and then proceeds with read and write. The pass criteria for this test is that tag fault exception should not happen. 2) This test-case crosses the valid memory to the invalid memory. In this memory area valid tags are not inserted so read and write should not pass. The pass criteria for this test is that tag fault exception should happen for all the illegal addresses. This test also verfies that PSTATE.TCO works properly. 3) This test-case verifies that the memory inherited by child process from parent process should have same tags copied. The pass criteria for this test is that tag fault exception should not happen. 4) This test checks different mmap flags with PROT_MTE memory protection. 5) This testcase checks that KSM should not merge pages containing different MTE tag values. However, if the tags are same then the pages may merge. This testcase uses the generic ksm sysfs interfaces to verify the MTE behaviour, so this testcase is not fullproof and may be impacted due to other load in the system. 6) Fifth test verifies that syscalls read/write etc works by considering that user pointer has valid/invalid allocation tags. Changes since v1 [2]: * Redefined MTE kernel header definitions to decouple kselftest compilations. * Removed gmi masking instructions in mte_insert_random_tag assembly function. This simplifies the tag inclusion mask test with only GCR mask register used. * Created a new mte_insert_random_tag function with gmi instruction. This is useful for the 6th test which reuses the original tag. * Now use /dev/shm/* to hold temporary files. * Updated the 6th test to handle the error properly in case of failure in accessing memory with invalid tag in kernel. * Code and comment clean-ups. Thanks, Amit Daniel [1]: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/mte [2]: https://patchwork.kernel.org/patch/11747791/ Amit Daniel Kachhap (6): kselftest/arm64: Add utilities and a test to validate mte memory kselftest/arm64: Verify mte tag inclusion via prctl kselftest/arm64: Check forked child mte memory accessibility kselftest/arm64: Verify all different mmap MTE options kselftest/arm64: Verify KSM page merge for MTE pages kselftest/arm64: Check mte tagged user address in kernel tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/mte/.gitignore | 6 + tools/testing/selftests/arm64/mte/Makefile | 29 ++ .../selftests/arm64/mte/check_buffer_fill.c | 475 ++++++++++++++++++ .../selftests/arm64/mte/check_child_memory.c | 195 +++++++ .../selftests/arm64/mte/check_ksm_options.c | 159 ++++++ .../selftests/arm64/mte/check_mmap_options.c | 262 ++++++++++ .../arm64/mte/check_tags_inclusion.c | 185 +++++++ .../selftests/arm64/mte/check_user_mem.c | 111 ++++ .../selftests/arm64/mte/mte_common_util.c | 341 +++++++++++++ .../selftests/arm64/mte/mte_common_util.h | 118 +++++ tools/testing/selftests/arm64/mte/mte_def.h | 60 +++ .../testing/selftests/arm64/mte/mte_helper.S | 128 +++++ 13 files changed, 2070 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/arm64/mte/.gitignore create mode 100644 tools/testing/selftests/arm64/mte/Makefile create mode 100644 tools/testing/selftests/arm64/mte/check_buffer_fill.c create mode 100644 tools/testing/selftests/arm64/mte/check_child_memory.c create mode 100644 tools/testing/selftests/arm64/mte/check_ksm_options.c create mode 100644 tools/testing/selftests/arm64/mte/check_mmap_options.c create mode 100644 tools/testing/selftests/arm64/mte/check_tags_inclusion.c create mode 100644 tools/testing/selftests/arm64/mte/check_user_mem.c create mode 100644 tools/testing/selftests/arm64/mte/mte_common_util.c create mode 100644 tools/testing/selftests/arm64/mte/mte_common_util.h create mode 100644 tools/testing/selftests/arm64/mte/mte_def.h create mode 100644 tools/testing/selftests/arm64/mte/mte_helper.S -- 2.17.1

4 years, 3 months

3
8
0 0

[PATCH v3 0/5] Speed up mremap on large regions

by Kalesh Singh

This version 3 of the mremap speed up patches previously posted at: v1 - https://lore.kernel.org/r/20200930222130.4175584-1-kaleshsingh@google.com v2 - https://lore.kernel.org/r/20201002162101.665549-1-kaleshsingh@google.com mremap time can be optimized by moving entries at the PMD/PUD level if the source and destination addresses are PMD/PUD-aligned and PMD/PUD-sized. Enable moving at the PMD and PUD levels on arm64 and x86. Other architectures where this type of move is supported and known to be safe can also opt-in to these optimizations by enabling HAVE_MOVE_PMD and HAVE_MOVE_PUD. Observed Performance Improvements for remapping a PUD-aligned 1GB-sized region on x86 and arm64: - HAVE_MOVE_PMD is already enabled on x86 : N/A - Enabling HAVE_MOVE_PUD on x86 : ~13x speed up - Enabling HAVE_MOVE_PMD on arm64 : ~ 8x speed up - Enabling HAVE_MOVE_PUD on arm64 : ~19x speed up Altogether, HAVE_MOVE_PMD and HAVE_MOVE_PUD give a total of ~150x speed up on arm64. Changes in v2: - Reduce mremap_test time by only validating a configurable threshold of the remapped region, as per John. - Use a random pattern for mremap validation. Provide pattern seed in test output, as per John. - Moved set_pud_at() to separate patch, per Kirill. - Use switch() instead of ifs in move_pgt_entry(), per Kirill. - Update commit message with description of Android garbage collector use case for HAVE_MOVE_PUD, as per Joel. - Fix build test error reported by kernel test robot in [1]. Changes in v3: - Make lines 80 cols or less where they don’t need to be longer, per John. - Removed unused PATTERN_SIZE in mremap_test - Added Reviewed-by tag for patch 1/5 (mremap kselftest patch). - Use switch() instead of ifs in get_extent(), per Kirill - Add BUILD_BUG() is get_extent() default case. - Move get_old_pud() and alloc_new_pud() out of #ifdef CONFIG_HAVE_MOVE_PUD, per Kirill. - Have get_old_pmd() and alloc_new_pmd() use get_old_pud() and alloc_old_pud(), per Kirill. - Replace #ifdef CONFIG_HAVE_MOVE_PMD / PUD in move_page_tables() with IS_ENABLED(CONFIG_HAVE_MOVE_PMD / PUD), per Kirill. - Fold Add set_pud_at() patch into patch 4/5, per Kirill. [1] https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/CKPGL4F… Kalesh Singh (5): kselftests: vm: Add mremap tests arm64: mremap speedup - Enable HAVE_MOVE_PMD mm: Speedup mremap on 1GB or larger regions arm64: mremap speedup - Enable HAVE_MOVE_PUD x86: mremap speedup - Enable HAVE_MOVE_PUD arch/Kconfig | 7 + arch/arm64/Kconfig | 2 + arch/arm64/include/asm/pgtable.h | 1 + arch/x86/Kconfig | 1 + mm/mremap.c | 230 ++++++++++++--- tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 1 + tools/testing/selftests/vm/mremap_test.c | 344 +++++++++++++++++++++++ tools/testing/selftests/vm/run_vmtests | 11 + 9 files changed, 558 insertions(+), 40 deletions(-) create mode 100644 tools/testing/selftests/vm/mremap_test.c base-commit: 549738f15da0e5a00275977623be199fbbf7df50 -- 2.28.0.806.g8561365e88-goog

4 years, 3 months

1
5
0 0

[REGRESSION] kselftest: next-20201002

by LKFT

## Kernel * kernel: 5.9.0-rc7 * git repo: ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git', 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next'] * git branch: master * git commit: 2172e358cd1713c5b7c31361ac465edfe55e455c * git describe: next-20201002 * Test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201002 ## Regressions (compared to build next-20201001) x86: kselftest-vsyscall-mode-native: * net.fib-onlink-tests.sh * net.mptcp.mptcp_connect.sh kselftest-vsyscall-mode-none: * proc.read juno-r2: kselftest: * rtc.rtctest ## Fixes (compared to build next-20201001) x86: kselftest-vsyscall-mode-native: * pidfd.pidfd_test * tc-testing.tdc.sh kselftest-vsyscall-mode-none: * kvm.vmx_preemption_timer_test * rtc.rtctest kselftest: * rtc.rtctest * tc-testing.tdc.sh ## Summary ### i386, kselftest * total: 677 * pass: 411 * fail: 215 * skip: 51 * xfail: 0 ### juno-r2, kselftest * total: 653 * pass: 404 * fail: 199 * skip: 50 * xfail: 0 ### x86, kselftest * total: 671 * pass: 439 * fail: 187 * skip: 45 * xfail: 0 ### x86, kselftest-vsyscall-mode-native * total: 670 * pass: 436 * fail: 189 * skip: 45 * xfail: 0 ### x86, kselftest-vsyscall-mode-none * total: 671 * pass: 437 * fail: 189 * skip: 45 * xfail: 0 ## Environments * dragonboard-410c * hi6220-hikey * i386 * juno-r2 * juno-r2-compat * juno-r2-kasan * nxp-ls2088 * qemu_arm * qemu_arm64 * qemu_i386 * qemu_x86_64 * x15 * x86 * x86-kasan ## Suites * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none ## Failures ### i386, kselftest * bpf.test_verifier * bpf.test_maps * bpf.test_progs * bpf.test_dev_cgroup * bpf.test_tcpbpf_user * bpf.get_cgroup_id_user * bpf.test_socket_cookie * bpf.test_netcnt * bpf.test_tcpnotify_user * bpf.test_sysctl * bpf.test_progs-no_alu32 * bpf.test_xdp_redirect.sh * bpf.test_xdp_meta.sh * bpf.test_sock_addr.sh * bpf.test_tunnel.sh * bpf.test_lwt_seg6local.sh * bpf.test_skb_cgroup_id.sh * bpf.test_flow_dissector.sh * bpf.test_xdp_vlan_mode_generic.sh * bpf.test_xdp_vlan_mode_native.sh * bpf.test_lwt_ip_encap.sh * bpf.test_tcp_check_syncookie.sh * bpf.test_tc_tunnel.sh * bpf.test_tc_edt.sh * bpf.test_xdping.sh * bpf.test_bpftool.sh * cgroup.test_memcontrol * cgroup.test_kmem * cgroup.test_core * cgroup.test_freezer * clone3.clone3_clear_sighand * clone3.clone3_cap_checkpoint_restore * core.close_range_test * filesystems.binderfs.binderfs_test * firmware.fw_run_tests.sh * ftrace.ftracetest * intel_pstate.run.sh * kvm.cr4_cpuid_sync_test * kvm.evmcs_test * kvm.hyperv_cpuid * kvm.mmio_warning_test * kvm.platform_info_test * kvm.set_sregs_test * kvm.smm_test * kvm.state_test * kvm.vmx_preemption_timer_test * kvm.svm_vmcall_test * kvm.sync_regs_test * kvm.vmx_close_while_nested_test * kvm.vmx_dirty_log_test * kvm.vmx_set_nested_state_test * kvm.vmx_tsc_adjust_test * kvm.xss_msr_test * kvm.debug_regs * kvm.clear_dirty_log_test * kvm.demand_paging_test * kvm.dirty_log_test * kvm.kvm_create_max_vcpus * kvm.set_memory_region_test * kvm.steal_time * lkdtm.BUG.sh * lkdtm.WARNING.sh * lkdtm.WARNING_MESSAGE.sh * lkdtm.EXCEPTION.sh * lkdtm.CORRUPT_LIST_ADD.sh * lkdtm.CORRUPT_LIST_DEL.sh * lkdtm.STACK_GUARD_PAGE_LEADING.sh * lkdtm.STACK_GUARD_PAGE_TRAILING.sh * lkdtm.UNSET_SMEP.sh * lkdtm.DOUBLE_FAULT.sh * lkdtm.CORRUPT_PAC.sh * lkdtm.UNALIGNED_LOAD_STORE_WRITE.sh * lkdtm.READ_AFTER_FREE.sh * lkdtm.READ_BUDDY_AFTER_FREE.sh * lkdtm.SLAB_FREE_DOUBLE.sh * lkdtm.SLAB_FREE_CROSS.sh * lkdtm.SLAB_FREE_PAGE.sh * lkdtm.EXEC_DATA.sh * lkdtm.EXEC_STACK.sh * lkdtm.EXEC_KMALLOC.sh * lkdtm.EXEC_VMALLOC.sh * lkdtm.EXEC_RODATA.sh * lkdtm.EXEC_USERSPACE.sh * lkdtm.EXEC_NULL.sh * lkdtm.ACCESS_USERSPACE.sh * lkdtm.ACCESS_NULL.sh * lkdtm.WRITE_RO.sh * lkdtm.WRITE_RO_AFTER_INIT.sh * lkdtm.WRITE_KERN.sh * lkdtm.REFCOUNT_INC_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_OVERFLOW.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_DEC_ZERO.sh * lkdtm.REFCOUNT_DEC_NEGATIVE.sh * lkdtm.REFCOUNT_DEC_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_SUB_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_INC_ZERO.sh * lkdtm.REFCOUNT_ADD_ZERO.sh * lkdtm.REFCOUNT_INC_SATURATED.sh * lkdtm.REFCOUNT_DEC_SATURATED.sh * lkdtm.REFCOUNT_ADD_SATURATED.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_DEC_AND_TEST_SATURATED.sh * lkdtm.REFCOUNT_SUB_AND_TEST_SATURATED.sh * lkdtm.USERCOPY_HEAP_SIZE_TO.sh * lkdtm.USERCOPY_HEAP_SIZE_FROM.sh * lkdtm.USERCOPY_HEAP_WHITELIST_TO.sh * lkdtm.USERCOPY_HEAP_WHITELIST_FROM.sh * lkdtm.USERCOPY_STACK_FRAME_TO.sh * lkdtm.USERCOPY_STACK_FRAME_FROM.sh * lkdtm.USERCOPY_STACK_BEYOND.sh * lkdtm.USERCOPY_KERNEL.sh * lkdtm.STACKLEAK_ERASING.sh * lkdtm.CFI_FORWARD_PROTO.sh * mincore.mincore_selftest.global.check_file_mmap * mincore.mincore_selftest * mqueue.mq_perf_tests * net.run_netsocktests * net.fib_tests.sh * net.fib-onlink-tests.sh * net.pmtu.sh * net.udpgso_bench.sh * net.psock_snd.sh * net.udpgro_bench.sh * net.test_vxlan_under_vrf.sh * net.l2tp.sh * net.traceroute.sh * net.altnames.sh * net.icmp_redirect.sh * net.txtimestamp.sh * net.vrf-xfrm-tests.sh * net.devlink_port_split.py * net.forwarding.bridge_igmp.sh * net.forwarding.bridge_port_isolation.sh * net.forwarding.bridge_sticky_fdb.sh * net.forwarding.bridge_vlan_aware.sh * net.forwarding.bridge_vlan_unaware.sh * net.forwarding.ethtool.sh * net.forwarding.gre_inner_v4_multipath.sh * net.forwarding.gre_inner_v6_multipath.sh * net.forwarding.gre_multipath.sh * net.forwarding.ip6gre_inner_v4_multipath.sh * net.forwarding.ip6gre_inner_v6_multipath.sh * net.forwarding.ipip_flat_gre_key.sh * net.forwarding.ipip_flat_gre_keys.sh * net.forwarding.ipip_flat_gre.sh * net.forwarding.ipip_hier_gre_key.sh * net.forwarding.ipip_hier_gre_keys.sh * net.forwarding.ipip_hier_gre.sh * net.forwarding.loopback.sh * net.forwarding.mirror_gre_bound.sh * net.forwarding.mirror_gre_bridge_1d.sh * net.forwarding.mirror_gre_bridge_1d_vlan.sh * net.forwarding.mirror_gre_bridge_1q_lag.sh * net.forwarding.mirror_gre_bridge_1q.sh * net.forwarding.mirror_gre_changes.sh * net.forwarding.mirror_gre_flower.sh * net.forwarding.mirror_gre_lag_lacp.sh * net.forwarding.mirror_gre_neigh.sh * net.forwarding.mirror_gre_nh.sh * net.forwarding.mirror_gre.sh * net.forwarding.mirror_gre_vlan_bridge_1q.sh * net.forwarding.mirror_gre_vlan.sh * net.forwarding.mirror_vlan.sh * net.forwarding.router_bridge.sh * net.forwarding.router_bridge_vlan.sh * net.forwarding.router_broadcast.sh * net.forwarding.router_mpath_nh.sh * net.forwarding.router_multicast.sh * net.forwarding.router_multipath.sh * net.forwarding.router.sh * net.forwarding.router_vid_1.sh * net.forwarding.sch_ets.sh * net.forwarding.sch_tbf_ets.sh * net.forwarding.sch_tbf_prio.sh * net.forwarding.sch_tbf_root.sh * net.forwarding.tc_actions.sh * net.forwarding.tc_chains.sh * net.forwarding.tc_flower_router.sh * net.forwarding.tc_flower.sh * net.forwarding.tc_shblocks.sh * net.forwarding.tc_vlan_modify.sh * net.forwarding.vxlan_asymmetric.sh * net.forwarding.vxlan_bridge_1d_port_8472.sh * net.forwarding.vxlan_bridge_1d.sh * net.forwarding.vxlan_bridge_1q_port_8472.sh * net.forwarding.vxlan_bridge_1q.sh * net.forwarding.vxlan_symmetric.sh * net.mptcp.simult_flows.sh * netfilter.nft_concat_range.sh * netfilter.nft_queue.sh * pidfd.pidfd_test * pidfd.pidfd_open_test * pidfd.pidfd_poll_test * proc.proc-self-syscall * proc.proc-fsconfig-hidepid * pstore.pstore_tests * ptrace.vmaccess.global.attach * ptrace.vmaccess * openat2.openat2_test * openat2.resolve_test * openat2.rename_attack_test * rseq.param_test * rseq.param_test_benchmark * rseq.param_test_compare_twice * rseq.run_param_test.sh * seccomp.seccomp_bpf.global.user_notification_filter_empty * seccomp.seccomp_bpf.global.user_notification_filter_empty_threaded * seccomp.seccomp_bpf.global.user_notification_addfd * seccomp.seccomp_bpf * seccomp.seccomp_benchmark * splice.short_splice_read.sh * vm.run_vmtests.sh ### juno-r2, kselftest * bpf.test_verifier * bpf.test_tag * bpf.test_maps * bpf.test_lpm_map * bpf.test_progs * bpf.test_dev_cgroup * bpf.test_tcpbpf_user * bpf.get_cgroup_id_user * bpf.test_socket_cookie * bpf.test_netcnt * bpf.test_tcpnotify_user * bpf.test_sysctl * bpf.test_progs-no_alu32 * bpf.test_xdp_redirect.sh * bpf.test_xdp_meta.sh * bpf.test_sock_addr.sh * bpf.test_tunnel.sh * bpf.test_lwt_seg6local.sh * bpf.test_skb_cgroup_id.sh * bpf.test_flow_dissector.sh * bpf.test_xdp_vlan_mode_generic.sh * bpf.test_xdp_vlan_mode_native.sh * bpf.test_lwt_ip_encap.sh * bpf.test_tcp_check_syncookie.sh * bpf.test_tc_tunnel.sh * bpf.test_tc_edt.sh * bpf.test_xdping.sh * bpf.test_bpftool.sh * cgroup.test_memcontrol * cgroup.test_kmem * cgroup.test_core * cgroup.test_freezer * clone3.clone3_cap_checkpoint_restore * core.close_range_test * cpufreq.main.sh * filesystems.binderfs.binderfs_test * firmware.fw_run_tests.sh * ftrace.ftracetest * lkdtm.BUG.sh * lkdtm.WARNING.sh * lkdtm.WARNING_MESSAGE.sh * lkdtm.EXCEPTION.sh * lkdtm.CORRUPT_LIST_ADD.sh * lkdtm.CORRUPT_LIST_DEL.sh * lkdtm.STACK_GUARD_PAGE_LEADING.sh * lkdtm.STACK_GUARD_PAGE_TRAILING.sh * lkdtm.UNSET_SMEP.sh * lkdtm.CORRUPT_PAC.sh * lkdtm.UNALIGNED_LOAD_STORE_WRITE.sh * lkdtm.READ_AFTER_FREE.sh * lkdtm.READ_BUDDY_AFTER_FREE.sh * lkdtm.SLAB_FREE_DOUBLE.sh * lkdtm.SLAB_FREE_CROSS.sh * lkdtm.SLAB_FREE_PAGE.sh * lkdtm.EXEC_DATA.sh * lkdtm.EXEC_STACK.sh * lkdtm.EXEC_KMALLOC.sh * lkdtm.EXEC_VMALLOC.sh * lkdtm.EXEC_RODATA.sh * lkdtm.EXEC_USERSPACE.sh * lkdtm.EXEC_NULL.sh * lkdtm.ACCESS_USERSPACE.sh * lkdtm.ACCESS_NULL.sh * lkdtm.WRITE_RO.sh * lkdtm.WRITE_RO_AFTER_INIT.sh * lkdtm.WRITE_KERN.sh * lkdtm.REFCOUNT_INC_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_OVERFLOW.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_DEC_ZERO.sh * lkdtm.REFCOUNT_DEC_NEGATIVE.sh * lkdtm.REFCOUNT_DEC_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_SUB_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_INC_ZERO.sh * lkdtm.REFCOUNT_ADD_ZERO.sh * lkdtm.REFCOUNT_INC_SATURATED.sh * lkdtm.REFCOUNT_DEC_SATURATED.sh * lkdtm.REFCOUNT_ADD_SATURATED.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_DEC_AND_TEST_SATURATED.sh * lkdtm.REFCOUNT_SUB_AND_TEST_SATURATED.sh * lkdtm.USERCOPY_HEAP_SIZE_TO.sh * lkdtm.USERCOPY_HEAP_SIZE_FROM.sh * lkdtm.USERCOPY_HEAP_WHITELIST_TO.sh * lkdtm.USERCOPY_HEAP_WHITELIST_FROM.sh * lkdtm.USERCOPY_STACK_FRAME_TO.sh * lkdtm.USERCOPY_STACK_FRAME_FROM.sh * lkdtm.USERCOPY_STACK_BEYOND.sh * lkdtm.USERCOPY_KERNEL.sh * lkdtm.STACKLEAK_ERASING.sh * lkdtm.CFI_FORWARD_PROTO.sh * memory-hotplug.mem-on-off-test.sh * mincore.mincore_selftest.global.check_file_mmap * mincore.mincore_selftest * net.run_netsocktests * net.fib_tests.sh * net.fib-onlink-tests.sh * net.pmtu.sh * net.udpgso_bench.sh * net.fib_rule_tests.sh * net.psock_snd.sh * net.udpgro_bench.sh * net.udpgro.sh * net.test_vxlan_under_vrf.sh * net.tcp_fastopen_backup_key.sh * net.l2tp.sh * net.fib_nexthops.sh * net.altnames.sh * net.icmp_redirect.sh * net.txtimestamp.sh * net.vrf-xfrm-tests.sh * net.devlink_port_split.py * net.forwarding.bridge_igmp.sh * net.forwarding.bridge_port_isolation.sh * net.forwarding.bridge_sticky_fdb.sh * net.forwarding.bridge_vlan_aware.sh * net.forwarding.bridge_vlan_unaware.sh * net.forwarding.ethtool.sh * net.forwarding.gre_inner_v4_multipath.sh * net.forwarding.gre_inner_v6_multipath.sh * net.forwarding.gre_multipath.sh * net.forwarding.ip6gre_inner_v4_multipath.sh * net.forwarding.ip6gre_inner_v6_multipath.sh * net.forwarding.ipip_flat_gre_key.sh * net.forwarding.ipip_flat_gre_keys.sh * net.forwarding.ipip_flat_gre.sh * net.forwarding.ipip_hier_gre_key.sh * net.forwarding.ipip_hier_gre_keys.sh * net.forwarding.ipip_hier_gre.sh * net.forwarding.loopback.sh * net.forwarding.mirror_gre_bound.sh * net.forwarding.mirror_gre_bridge_1d.sh * net.forwarding.mirror_gre_bridge_1d_vlan.sh * net.forwarding.mirror_gre_bridge_1q_lag.sh * net.forwarding.mirror_gre_bridge_1q.sh * net.forwarding.mirror_gre_changes.sh * net.forwarding.mirror_gre_flower.sh * net.forwarding.mirror_gre_lag_lacp.sh * net.forwarding.mirror_gre_neigh.sh * net.forwarding.mirror_gre_nh.sh * net.forwarding.mirror_gre.sh * net.forwarding.mirror_gre_vlan_bridge_1q.sh * net.forwarding.mirror_gre_vlan.sh * net.forwarding.mirror_vlan.sh * net.forwarding.router_bridge.sh * net.forwarding.router_bridge_vlan.sh * net.forwarding.router_broadcast.sh * net.forwarding.router_mpath_nh.sh * net.forwarding.router_multicast.sh * net.forwarding.router_multipath.sh * net.forwarding.router.sh * net.forwarding.router_vid_1.sh * net.forwarding.sch_ets.sh * net.forwarding.sch_tbf_ets.sh * net.forwarding.sch_tbf_prio.sh * net.forwarding.sch_tbf_root.sh * net.forwarding.tc_actions.sh * net.forwarding.tc_chains.sh * net.forwarding.tc_flower_router.sh * net.forwarding.tc_flower.sh * net.forwarding.tc_shblocks.sh * net.forwarding.tc_vlan_modify.sh * net.forwarding.vxlan_asymmetric.sh * net.forwarding.vxlan_bridge_1d_port_8472.sh * net.forwarding.vxlan_bridge_1d.sh * net.forwarding.vxlan_bridge_1q_port_8472.sh * net.forwarding.vxlan_bridge_1q.sh * net.forwarding.vxlan_symmetric.sh * net.mptcp.simult_flows.sh * netfilter.nft_nat.sh * netfilter.conntrack_icmp_related.sh * netfilter.nft_concat_range.sh * netfilter.nft_queue.sh * pidfd.pidfd_test * pidfd.pidfd_fdinfo_test * pidfd.pidfd_open_test * pidfd.pidfd_poll_test * proc.proc-fsconfig-hidepid * pstore.pstore_tests * ptrace.vmaccess.global.attach * ptrace.vmaccess * openat2.openat2_test * openat2.resolve_test * openat2.rename_attack_test * rseq.param_test * rseq.param_test_benchmark * rseq.param_test_compare_twice * rtc.rtctest * seccomp.seccomp_bpf.global.user_notification_filter_empty * seccomp.seccomp_bpf.global.user_notification_filter_empty_threaded * seccomp.seccomp_bpf.global.user_notification_addfd * seccomp.seccomp_bpf * seccomp.seccomp_benchmark * splice.short_splice_read.sh * sysctl.sysctl.sh * tc-testing.tdc.sh * vm.run_vmtests.sh ### x86, kselftest * bpf.test_verifier * bpf.test_maps * bpf.test_progs * bpf.test_dev_cgroup * bpf.test_tcpbpf_user * bpf.get_cgroup_id_user * bpf.test_socket_cookie * bpf.test_netcnt * bpf.test_tcpnotify_user * bpf.test_sysctl * bpf.test_progs-no_alu32 * bpf.test_xdp_redirect.sh * bpf.test_xdp_meta.sh * bpf.test_sock_addr.sh * bpf.test_tunnel.sh * bpf.test_lwt_seg6local.sh * bpf.test_skb_cgroup_id.sh * bpf.test_flow_dissector.sh * bpf.test_xdp_vlan_mode_generic.sh * bpf.test_xdp_vlan_mode_native.sh * bpf.test_lwt_ip_encap.sh * bpf.test_tcp_check_syncookie.sh * bpf.test_tc_tunnel.sh * bpf.test_tc_edt.sh * bpf.test_xdping.sh * bpf.test_bpftool.sh * cgroup.test_memcontrol * cgroup.test_kmem * cgroup.test_core * cgroup.test_freezer * clone3.clone3_cap_checkpoint_restore * core.close_range_test * filesystems.binderfs.binderfs_test * firmware.fw_run_tests.sh * ftrace.ftracetest * intel_pstate.run.sh * lkdtm.BUG.sh * lkdtm.WARNING.sh * lkdtm.WARNING_MESSAGE.sh * lkdtm.EXCEPTION.sh * lkdtm.CORRUPT_LIST_ADD.sh * lkdtm.CORRUPT_LIST_DEL.sh * lkdtm.STACK_GUARD_PAGE_LEADING.sh * lkdtm.STACK_GUARD_PAGE_TRAILING.sh * lkdtm.UNSET_SMEP.sh * lkdtm.CORRUPT_PAC.sh * lkdtm.UNALIGNED_LOAD_STORE_WRITE.sh * lkdtm.READ_AFTER_FREE.sh * lkdtm.READ_BUDDY_AFTER_FREE.sh * lkdtm.SLAB_FREE_DOUBLE.sh * lkdtm.SLAB_FREE_CROSS.sh * lkdtm.SLAB_FREE_PAGE.sh * lkdtm.EXEC_DATA.sh * lkdtm.EXEC_STACK.sh * lkdtm.EXEC_KMALLOC.sh * lkdtm.EXEC_VMALLOC.sh * lkdtm.EXEC_RODATA.sh * lkdtm.EXEC_USERSPACE.sh * lkdtm.EXEC_NULL.sh * lkdtm.ACCESS_USERSPACE.sh * lkdtm.ACCESS_NULL.sh * lkdtm.WRITE_RO.sh * lkdtm.WRITE_RO_AFTER_INIT.sh * lkdtm.WRITE_KERN.sh * lkdtm.REFCOUNT_INC_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_OVERFLOW.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_DEC_ZERO.sh * lkdtm.REFCOUNT_DEC_NEGATIVE.sh * lkdtm.REFCOUNT_DEC_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_SUB_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_INC_ZERO.sh * lkdtm.REFCOUNT_ADD_ZERO.sh * lkdtm.REFCOUNT_INC_SATURATED.sh * lkdtm.REFCOUNT_DEC_SATURATED.sh * lkdtm.REFCOUNT_ADD_SATURATED.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_DEC_AND_TEST_SATURATED.sh * lkdtm.REFCOUNT_SUB_AND_TEST_SATURATED.sh * lkdtm.USERCOPY_HEAP_SIZE_TO.sh * lkdtm.USERCOPY_HEAP_SIZE_FROM.sh * lkdtm.USERCOPY_HEAP_WHITELIST_TO.sh * lkdtm.USERCOPY_HEAP_WHITELIST_FROM.sh * lkdtm.USERCOPY_STACK_FRAME_TO.sh * lkdtm.USERCOPY_STACK_FRAME_FROM.sh * lkdtm.USERCOPY_STACK_BEYOND.sh * lkdtm.USERCOPY_KERNEL.sh * lkdtm.STACKLEAK_ERASING.sh * lkdtm.CFI_FORWARD_PROTO.sh * mincore.mincore_selftest.global.check_file_mmap * mincore.mincore_selftest * mqueue.mq_perf_tests * net.run_netsocktests * net.xfrm_policy.sh * net.fib_tests.sh * net.fib-onlink-tests.sh * net.pmtu.sh * net.udpgso_bench.sh * net.psock_snd.sh * net.udpgro_bench.sh * net.udpgro.sh * net.test_vxlan_under_vrf.sh * net.l2tp.sh * net.traceroute.sh * net.altnames.sh * net.icmp_redirect.sh * net.txtimestamp.sh * net.vrf-xfrm-tests.sh * net.devlink_port_split.py * net.forwarding.bridge_igmp.sh * net.forwarding.bridge_port_isolation.sh * net.forwarding.bridge_sticky_fdb.sh * net.forwarding.bridge_vlan_aware.sh * net.forwarding.bridge_vlan_unaware.sh * net.forwarding.ethtool.sh * net.forwarding.gre_inner_v4_multipath.sh * net.forwarding.gre_inner_v6_multipath.sh * net.forwarding.gre_multipath.sh * net.forwarding.ip6gre_inner_v4_multipath.sh * net.forwarding.ip6gre_inner_v6_multipath.sh * net.forwarding.ipip_flat_gre_key.sh * net.forwarding.ipip_flat_gre_keys.sh * net.forwarding.ipip_flat_gre.sh * net.forwarding.ipip_hier_gre_key.sh * net.forwarding.ipip_hier_gre_keys.sh * net.forwarding.ipip_hier_gre.sh * net.forwarding.loopback.sh * net.forwarding.mirror_gre_bound.sh * net.forwarding.mirror_gre_bridge_1d.sh * net.forwarding.mirror_gre_bridge_1d_vlan.sh * net.forwarding.mirror_gre_bridge_1q_lag.sh * net.forwarding.mirror_gre_bridge_1q.sh * net.forwarding.mirror_gre_changes.sh * net.forwarding.mirror_gre_flower.sh * net.forwarding.mirror_gre_lag_lacp.sh * net.forwarding.mirror_gre_neigh.sh * net.forwarding.mirror_gre_nh.sh * net.forwarding.mirror_gre.sh * net.forwarding.mirror_gre_vlan_bridge_1q.sh * net.forwarding.mirror_gre_vlan.sh * net.forwarding.mirror_vlan.sh * net.forwarding.router_bridge.sh * net.forwarding.router_bridge_vlan.sh * net.forwarding.router_broadcast.sh * net.forwarding.router_mpath_nh.sh * net.forwarding.router_multicast.sh * net.forwarding.router_multipath.sh * net.forwarding.router.sh * net.forwarding.router_vid_1.sh * net.forwarding.sch_ets.sh * net.forwarding.sch_tbf_ets.sh * net.forwarding.sch_tbf_prio.sh * net.forwarding.sch_tbf_root.sh * net.forwarding.tc_actions.sh * net.forwarding.tc_chains.sh * net.forwarding.tc_flower_router.sh * net.forwarding.tc_flower.sh * net.forwarding.tc_shblocks.sh * net.forwarding.tc_vlan_modify.sh * net.forwarding.vxlan_asymmetric.sh * net.forwarding.vxlan_bridge_1d_port_8472.sh * net.forwarding.vxlan_bridge_1d.sh * net.forwarding.vxlan_bridge_1q_port_8472.sh * net.forwarding.vxlan_bridge_1q.sh * net.forwarding.vxlan_symmetric.sh * net.mptcp.simult_flows.sh * netfilter.nft_concat_range.sh * netfilter.nft_queue.sh * pidfd.pidfd_open_test * pidfd.pidfd_poll_test * proc.proc-fsconfig-hidepid * pstore.pstore_tests * ptrace.vmaccess.global.attach * ptrace.vmaccess * openat2.openat2_test * openat2.resolve_test * openat2.rename_attack_test * seccomp.seccomp_bpf.global.user_notification_filter_empty * seccomp.seccomp_bpf.global.user_notification_filter_empty_threaded * seccomp.seccomp_bpf.global.user_notification_addfd * seccomp.seccomp_bpf * seccomp.seccomp_benchmark * splice.short_splice_read.sh * vm.run_vmtests.sh * x86.syscall_numbering_64 ### x86, kselftest-vsyscall-mode-native * bpf.test_verifier * bpf.test_maps * bpf.test_progs * bpf.test_dev_cgroup * bpf.test_tcpbpf_user * bpf.get_cgroup_id_user * bpf.test_socket_cookie * bpf.test_netcnt * bpf.test_tcpnotify_user * bpf.test_sysctl * bpf.test_progs-no_alu32 * bpf.test_xdp_redirect.sh * bpf.test_xdp_meta.sh * bpf.test_sock_addr.sh * bpf.test_tunnel.sh * bpf.test_lwt_seg6local.sh * bpf.test_skb_cgroup_id.sh * bpf.test_flow_dissector.sh * bpf.test_xdp_vlan_mode_generic.sh * bpf.test_xdp_vlan_mode_native.sh * bpf.test_lwt_ip_encap.sh * bpf.test_tcp_check_syncookie.sh * bpf.test_tc_tunnel.sh * bpf.test_tc_edt.sh * bpf.test_xdping.sh * bpf.test_bpftool.sh * cgroup.test_memcontrol * cgroup.test_kmem * cgroup.test_core * cgroup.test_freezer * clone3.clone3_cap_checkpoint_restore * core.close_range_test * filesystems.binderfs.binderfs_test * firmware.fw_run_tests.sh * ftrace.ftracetest * intel_pstate.run.sh * lkdtm.BUG.sh * lkdtm.WARNING.sh * lkdtm.WARNING_MESSAGE.sh * lkdtm.EXCEPTION.sh * lkdtm.CORRUPT_LIST_ADD.sh * lkdtm.CORRUPT_LIST_DEL.sh * lkdtm.STACK_GUARD_PAGE_LEADING.sh * lkdtm.STACK_GUARD_PAGE_TRAILING.sh * lkdtm.UNSET_SMEP.sh * lkdtm.CORRUPT_PAC.sh * lkdtm.UNALIGNED_LOAD_STORE_WRITE.sh * lkdtm.READ_AFTER_FREE.sh * lkdtm.READ_BUDDY_AFTER_FREE.sh * lkdtm.SLAB_FREE_DOUBLE.sh * lkdtm.SLAB_FREE_CROSS.sh * lkdtm.SLAB_FREE_PAGE.sh * lkdtm.EXEC_DATA.sh * lkdtm.EXEC_STACK.sh * lkdtm.EXEC_KMALLOC.sh * lkdtm.EXEC_VMALLOC.sh * lkdtm.EXEC_RODATA.sh * lkdtm.EXEC_USERSPACE.sh * lkdtm.EXEC_NULL.sh * lkdtm.ACCESS_USERSPACE.sh * lkdtm.ACCESS_NULL.sh * lkdtm.WRITE_RO.sh * lkdtm.WRITE_RO_AFTER_INIT.sh * lkdtm.WRITE_KERN.sh * lkdtm.REFCOUNT_INC_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_OVERFLOW.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_DEC_ZERO.sh * lkdtm.REFCOUNT_DEC_NEGATIVE.sh * lkdtm.REFCOUNT_DEC_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_SUB_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_INC_ZERO.sh * lkdtm.REFCOUNT_ADD_ZERO.sh * lkdtm.REFCOUNT_INC_SATURATED.sh * lkdtm.REFCOUNT_DEC_SATURATED.sh * lkdtm.REFCOUNT_ADD_SATURATED.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_DEC_AND_TEST_SATURATED.sh * lkdtm.REFCOUNT_SUB_AND_TEST_SATURATED.sh * lkdtm.USERCOPY_HEAP_SIZE_TO.sh * lkdtm.USERCOPY_HEAP_SIZE_FROM.sh * lkdtm.USERCOPY_HEAP_WHITELIST_TO.sh * lkdtm.USERCOPY_HEAP_WHITELIST_FROM.sh * lkdtm.USERCOPY_STACK_FRAME_TO.sh * lkdtm.USERCOPY_STACK_FRAME_FROM.sh * lkdtm.USERCOPY_STACK_BEYOND.sh * lkdtm.USERCOPY_KERNEL.sh * lkdtm.STACKLEAK_ERASING.sh * lkdtm.CFI_FORWARD_PROTO.sh * mincore.mincore_selftest.global.check_file_mmap * mincore.mincore_selftest * mqueue.mq_perf_tests * net.run_netsocktests * net.xfrm_policy.sh * net.fib_tests.sh * net.fib-onlink-tests.sh * net.pmtu.sh * net.udpgso_bench.sh * net.psock_snd.sh * net.udpgro_bench.sh * net.udpgro.sh * net.test_vxlan_under_vrf.sh * net.l2tp.sh * net.traceroute.sh * net.altnames.sh * net.icmp_redirect.sh * net.txtimestamp.sh * net.vrf-xfrm-tests.sh * net.devlink_port_split.py * net.forwarding.bridge_igmp.sh * net.forwarding.bridge_port_isolation.sh * net.forwarding.bridge_sticky_fdb.sh * net.forwarding.bridge_vlan_aware.sh * net.forwarding.bridge_vlan_unaware.sh * net.forwarding.ethtool.sh * net.forwarding.gre_inner_v4_multipath.sh * net.forwarding.gre_inner_v6_multipath.sh * net.forwarding.gre_multipath.sh * net.forwarding.ip6gre_inner_v4_multipath.sh * net.forwarding.ip6gre_inner_v6_multipath.sh * net.forwarding.ipip_flat_gre_key.sh * net.forwarding.ipip_flat_gre_keys.sh * net.forwarding.ipip_flat_gre.sh * net.forwarding.ipip_hier_gre_key.sh * net.forwarding.ipip_hier_gre_keys.sh * net.forwarding.ipip_hier_gre.sh * net.forwarding.loopback.sh * net.forwarding.mirror_gre_bound.sh * net.forwarding.mirror_gre_bridge_1d.sh * net.forwarding.mirror_gre_bridge_1d_vlan.sh * net.forwarding.mirror_gre_bridge_1q_lag.sh * net.forwarding.mirror_gre_bridge_1q.sh * net.forwarding.mirror_gre_changes.sh * net.forwarding.mirror_gre_flower.sh * net.forwarding.mirror_gre_lag_lacp.sh * net.forwarding.mirror_gre_neigh.sh * net.forwarding.mirror_gre_nh.sh * net.forwarding.mirror_gre.sh * net.forwarding.mirror_gre_vlan_bridge_1q.sh * net.forwarding.mirror_gre_vlan.sh * net.forwarding.mirror_vlan.sh * net.forwarding.router_bridge.sh * net.forwarding.router_bridge_vlan.sh * net.forwarding.router_broadcast.sh * net.forwarding.router_mpath_nh.sh * net.forwarding.router_multicast.sh * net.forwarding.router_multipath.sh * net.forwarding.router.sh * net.forwarding.router_vid_1.sh * net.forwarding.sch_ets.sh * net.forwarding.sch_tbf_ets.sh * net.forwarding.sch_tbf_prio.sh * net.forwarding.sch_tbf_root.sh * net.forwarding.tc_actions.sh * net.forwarding.tc_chains.sh * net.forwarding.tc_flower_router.sh * net.forwarding.tc_flower.sh * net.forwarding.tc_shblocks.sh * net.forwarding.tc_vlan_modify.sh * net.forwarding.vxlan_asymmetric.sh * net.forwarding.vxlan_bridge_1d_port_8472.sh * net.forwarding.vxlan_bridge_1d.sh * net.forwarding.vxlan_bridge_1q_port_8472.sh * net.forwarding.vxlan_bridge_1q.sh * net.forwarding.vxlan_symmetric.sh * net.mptcp.mptcp_connect.sh * net.mptcp.simult_flows.sh * netfilter.nft_concat_range.sh * netfilter.nft_queue.sh * pidfd.pidfd_open_test * pidfd.pidfd_poll_test * proc.proc-fsconfig-hidepid * pstore.pstore_tests * ptrace.vmaccess.global.attach * ptrace.vmaccess * openat2.openat2_test * openat2.resolve_test * openat2.rename_attack_test * rtc.rtctest * seccomp.seccomp_bpf.global.user_notification_filter_empty * seccomp.seccomp_bpf.global.user_notification_filter_empty_threaded * seccomp.seccomp_bpf.global.user_notification_addfd * seccomp.seccomp_bpf * seccomp.seccomp_benchmark * splice.short_splice_read.sh * vm.run_vmtests.sh * x86.syscall_numbering_64 ### x86, kselftest-vsyscall-mode-none * bpf.test_verifier * bpf.test_maps * bpf.test_progs * bpf.test_dev_cgroup * bpf.test_tcpbpf_user * bpf.get_cgroup_id_user * bpf.test_socket_cookie * bpf.test_netcnt * bpf.test_tcpnotify_user * bpf.test_sysctl * bpf.test_progs-no_alu32 * bpf.test_xdp_redirect.sh * bpf.test_xdp_meta.sh * bpf.test_sock_addr.sh * bpf.test_tunnel.sh * bpf.test_lwt_seg6local.sh * bpf.test_skb_cgroup_id.sh * bpf.test_flow_dissector.sh * bpf.test_xdp_vlan_mode_generic.sh * bpf.test_xdp_vlan_mode_native.sh * bpf.test_lwt_ip_encap.sh * bpf.test_tcp_check_syncookie.sh * bpf.test_tc_tunnel.sh * bpf.test_tc_edt.sh * bpf.test_xdping.sh * bpf.test_bpftool.sh * cgroup.test_memcontrol * cgroup.test_kmem * cgroup.test_core * cgroup.test_freezer * clone3.clone3_cap_checkpoint_restore * core.close_range_test * filesystems.binderfs.binderfs_test * firmware.fw_run_tests.sh * ftrace.ftracetest * intel_pstate.run.sh * lkdtm.BUG.sh * lkdtm.WARNING.sh * lkdtm.WARNING_MESSAGE.sh * lkdtm.EXCEPTION.sh * lkdtm.CORRUPT_LIST_ADD.sh * lkdtm.CORRUPT_LIST_DEL.sh * lkdtm.STACK_GUARD_PAGE_LEADING.sh * lkdtm.STACK_GUARD_PAGE_TRAILING.sh * lkdtm.UNSET_SMEP.sh * lkdtm.CORRUPT_PAC.sh * lkdtm.UNALIGNED_LOAD_STORE_WRITE.sh * lkdtm.READ_AFTER_FREE.sh * lkdtm.READ_BUDDY_AFTER_FREE.sh * lkdtm.SLAB_FREE_DOUBLE.sh * lkdtm.SLAB_FREE_CROSS.sh * lkdtm.SLAB_FREE_PAGE.sh * lkdtm.EXEC_DATA.sh * lkdtm.EXEC_STACK.sh * lkdtm.EXEC_KMALLOC.sh * lkdtm.EXEC_VMALLOC.sh * lkdtm.EXEC_RODATA.sh * lkdtm.EXEC_USERSPACE.sh * lkdtm.EXEC_NULL.sh * lkdtm.ACCESS_USERSPACE.sh * lkdtm.ACCESS_NULL.sh * lkdtm.WRITE_RO.sh * lkdtm.WRITE_RO_AFTER_INIT.sh * lkdtm.WRITE_KERN.sh * lkdtm.REFCOUNT_INC_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_OVERFLOW.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh * lkdtm.REFCOUNT_DEC_ZERO.sh * lkdtm.REFCOUNT_DEC_NEGATIVE.sh * lkdtm.REFCOUNT_DEC_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_SUB_AND_TEST_NEGATIVE.sh * lkdtm.REFCOUNT_INC_ZERO.sh * lkdtm.REFCOUNT_ADD_ZERO.sh * lkdtm.REFCOUNT_INC_SATURATED.sh * lkdtm.REFCOUNT_DEC_SATURATED.sh * lkdtm.REFCOUNT_ADD_SATURATED.sh * lkdtm.REFCOUNT_INC_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_ADD_NOT_ZERO_SATURATED.sh * lkdtm.REFCOUNT_DEC_AND_TEST_SATURATED.sh * lkdtm.REFCOUNT_SUB_AND_TEST_SATURATED.sh * lkdtm.USERCOPY_HEAP_SIZE_TO.sh * lkdtm.USERCOPY_HEAP_SIZE_FROM.sh * lkdtm.USERCOPY_HEAP_WHITELIST_TO.sh * lkdtm.USERCOPY_HEAP_WHITELIST_FROM.sh * lkdtm.USERCOPY_STACK_FRAME_TO.sh * lkdtm.USERCOPY_STACK_FRAME_FROM.sh * lkdtm.USERCOPY_STACK_BEYOND.sh * lkdtm.USERCOPY_KERNEL.sh * lkdtm.STACKLEAK_ERASING.sh * lkdtm.CFI_FORWARD_PROTO.sh * mincore.mincore_selftest.global.check_file_mmap * mincore.mincore_selftest * mqueue.mq_perf_tests * net.run_netsocktests * net.xfrm_policy.sh * net.fib_tests.sh * net.fib-onlink-tests.sh * net.pmtu.sh * net.udpgso_bench.sh * net.psock_snd.sh * net.udpgro_bench.sh * net.udpgro.sh * net.test_vxlan_under_vrf.sh * net.l2tp.sh * net.traceroute.sh * net.altnames.sh * net.icmp_redirect.sh * net.txtimestamp.sh * net.vrf-xfrm-tests.sh * net.devlink_port_split.py * net.forwarding.bridge_igmp.sh * net.forwarding.bridge_port_isolation.sh * net.forwarding.bridge_sticky_fdb.sh * net.forwarding.bridge_vlan_aware.sh * net.forwarding.bridge_vlan_unaware.sh * net.forwarding.ethtool.sh * net.forwarding.gre_inner_v4_multipath.sh * net.forwarding.gre_inner_v6_multipath.sh * net.forwarding.gre_multipath.sh * net.forwarding.ip6gre_inner_v4_multipath.sh * net.forwarding.ip6gre_inner_v6_multipath.sh * net.forwarding.ipip_flat_gre_key.sh * net.forwarding.ipip_flat_gre_keys.sh * net.forwarding.ipip_flat_gre.sh * net.forwarding.ipip_hier_gre_key.sh * net.forwarding.ipip_hier_gre_keys.sh * net.forwarding.ipip_hier_gre.sh * net.forwarding.loopback.sh * net.forwarding.mirror_gre_bound.sh * net.forwarding.mirror_gre_bridge_1d.sh * net.forwarding.mirror_gre_bridge_1d_vlan.sh * net.forwarding.mirror_gre_bridge_1q_lag.sh * net.forwarding.mirror_gre_bridge_1q.sh * net.forwarding.mirror_gre_changes.sh * net.forwarding.mirror_gre_flower.sh * net.forwarding.mirror_gre_lag_lacp.sh * net.forwarding.mirror_gre_neigh.sh * net.forwarding.mirror_gre_nh.sh * net.forwarding.mirror_gre.sh * net.forwarding.mirror_gre_vlan_bridge_1q.sh * net.forwarding.mirror_gre_vlan.sh * net.forwarding.mirror_vlan.sh * net.forwarding.router_bridge.sh * net.forwarding.router_bridge_vlan.sh * net.forwarding.router_broadcast.sh * net.forwarding.router_mpath_nh.sh * net.forwarding.router_multicast.sh * net.forwarding.router_multipath.sh * net.forwarding.router.sh * net.forwarding.router_vid_1.sh * net.forwarding.sch_ets.sh * net.forwarding.sch_tbf_ets.sh * net.forwarding.sch_tbf_prio.sh * net.forwarding.sch_tbf_root.sh * net.forwarding.tc_actions.sh * net.forwarding.tc_chains.sh * net.forwarding.tc_flower_router.sh * net.forwarding.tc_flower.sh * net.forwarding.tc_shblocks.sh * net.forwarding.tc_vlan_modify.sh * net.forwarding.vxlan_asymmetric.sh * net.forwarding.vxlan_bridge_1d_port_8472.sh * net.forwarding.vxlan_bridge_1d.sh * net.forwarding.vxlan_bridge_1q_port_8472.sh * net.forwarding.vxlan_bridge_1q.sh * net.forwarding.vxlan_symmetric.sh * net.mptcp.simult_flows.sh * netfilter.nft_concat_range.sh * netfilter.nft_queue.sh * pidfd.pidfd_open_test * pidfd.pidfd_poll_test * proc.read * proc.proc-fsconfig-hidepid * pstore.pstore_tests * ptrace.vmaccess.global.attach * ptrace.vmaccess * openat2.openat2_test * openat2.resolve_test * openat2.rename_attack_test * seccomp.seccomp_bpf.global.user_notification_filter_empty * seccomp.seccomp_bpf.global.user_notification_filter_empty_threaded * seccomp.seccomp_bpf.global.user_notification_addfd * seccomp.seccomp_bpf * seccomp.seccomp_benchmark * splice.short_splice_read.sh * tc-testing.tdc.sh * vm.run_vmtests.sh * x86.syscall_numbering_64 ## Skips ### i386, kselftest * breakpoints.breakpoint_test * breakpoints.step_after_suspend_test * net.msg_zerocopy.sh * net.rtnetlink.sh * net.udpgro.sh * net.xfrm_policy.sh * netfilter.bridge_brouter.sh * netfilter.conntrack_icmp_related.sh * netfilter.nft_flowtable.sh * netfilter.nft_nat.sh * netfilter.nft_trans_stress.sh * pidfd.pidfd_wait * zram.zram.sh * bpf.test_xdp_veth.sh * bpf.test_bpftool_metadata.sh * cgroup.test_stress.sh * efivarfs.efivarfs.sh * fpu.run_test_fpu.sh * ir.ir_loopback.sh * kexec.test_kexec_load.sh * kexec.test_kexec_file_load.sh * livepatch.test-livepatch.sh * livepatch.test-callbacks.sh * livepatch.test-shadow-vars.sh * livepatch.test-state.sh * livepatch.test-ftrace.sh * lkdtm.PANIC.sh * lkdtm.LOOP.sh * lkdtm.EXHAUST_STACK.sh * lkdtm.CORRUPT_STACK.sh * lkdtm.CORRUPT_STACK_STRONG.sh * lkdtm.OVERWRITE_ALLOCATION.sh * lkdtm.WRITE_AFTER_FREE.sh * lkdtm.WRITE_BUDDY_AFTER_FREE.sh * lkdtm.SOFTLOCKUP.sh * lkdtm.HARDLOCKUP.sh * lkdtm.SPINLOCKUP.sh * lkdtm.HUNG_TASK.sh * lkdtm.REFCOUNT_TIMING.sh * lkdtm.ATOMIC_TIMING.sh * memory-hotplug.mem-on-off-test.sh * net.reuseport_bpf_numa * net.drop_monitor_tests.sh * net.mptcp.diag.sh * netfilter.ipvs.sh * netfilter.nft_conntrack_helper.sh * netfilter.nft_meta.sh * proc.proc-pid-vm * pstore.pstore_post_reboot_tests * tpm2.test_smoke.sh * tpm2.test_space.sh ### juno-r2, kselftest * mqueue.mq_perf_tests * breakpoints.breakpoint_test_arm64 * breakpoints.step_after_suspend_test * net.msg_zerocopy.sh * net.rtnetlink.sh * netfilter.bridge_brouter.sh * netfilter.nft_flowtable.sh * netfilter.nft_trans_stress.sh * pidfd.pidfd_wait * rseq.run_param_test.sh * zram.zram.sh * arm64.sve-ptrace * arm64.sve-probe-vls * bpf.test_xdp_veth.sh * bpf.test_bpftool_metadata.sh * cgroup.test_stress.sh * efivarfs.efivarfs.sh * fpu.run_test_fpu.sh * intel_pstate.run.sh * ir.ir_loopback.sh * livepatch.test-livepatch.sh * livepatch.test-callbacks.sh * livepatch.test-shadow-vars.sh * livepatch.test-state.sh * livepatch.test-ftrace.sh * lkdtm.PANIC.sh * lkdtm.LOOP.sh * lkdtm.EXHAUST_STACK.sh * lkdtm.CORRUPT_STACK.sh * lkdtm.CORRUPT_STACK_STRONG.sh * lkdtm.DOUBLE_FAULT.sh * lkdtm.OVERWRITE_ALLOCATION.sh * lkdtm.WRITE_AFTER_FREE.sh * lkdtm.WRITE_BUDDY_AFTER_FREE.sh * lkdtm.SOFTLOCKUP.sh * lkdtm.HARDLOCKUP.sh * lkdtm.SPINLOCKUP.sh * lkdtm.HUNG_TASK.sh * lkdtm.REFCOUNT_TIMING.sh * lkdtm.ATOMIC_TIMING.sh * net.xfrm_policy.sh * net.drop_monitor_tests.sh * net.mptcp.diag.sh * netfilter.ipvs.sh * netfilter.nft_conntrack_helper.sh * netfilter.nft_meta.sh * proc.proc-pid-vm * pstore.pstore_post_reboot_tests * tpm2.test_smoke.sh * tpm2.test_space.sh ### x86, kselftest * breakpoints.breakpoint_test * breakpoints.step_after_suspend_test * net.msg_zerocopy.sh * net.rtnetlink.sh * netfilter.bridge_brouter.sh * netfilter.conntrack_icmp_related.sh * netfilter.nft_flowtable.sh * netfilter.nft_nat.sh * netfilter.nft_trans_stress.sh * pidfd.pidfd_wait * proc.proc-pid-vm * zram.zram.sh * bpf.test_xdp_veth.sh * bpf.test_bpftool_metadata.sh * cgroup.test_stress.sh * efivarfs.efivarfs.sh * fpu.run_test_fpu.sh * ir.ir_loopback.sh * kexec.test_kexec_load.sh * kexec.test_kexec_file_load.sh * kvm.mmio_warning_test * kvm.svm_vmcall_test * lkdtm.PANIC.sh * lkdtm.LOOP.sh * lkdtm.EXHAUST_STACK.sh * lkdtm.CORRUPT_STACK.sh * lkdtm.CORRUPT_STACK_STRONG.sh * lkdtm.DOUBLE_FAULT.sh * lkdtm.OVERWRITE_ALLOCATION.sh * lkdtm.WRITE_AFTER_FREE.sh * lkdtm.WRITE_BUDDY_AFTER_FREE.sh * lkdtm.SOFTLOCKUP.sh * lkdtm.HARDLOCKUP.sh * lkdtm.SPINLOCKUP.sh * lkdtm.HUNG_TASK.sh * lkdtm.REFCOUNT_TIMING.sh * lkdtm.ATOMIC_TIMING.sh * net.drop_monitor_tests.sh * net.mptcp.diag.sh * netfilter.ipvs.sh * netfilter.nft_conntrack_helper.sh * netfilter.nft_meta.sh * pstore.pstore_post_reboot_tests * tpm2.test_smoke.sh * tpm2.test_space.sh ### x86, kselftest-vsyscall-mode-native * breakpoints.breakpoint_test * breakpoints.step_after_suspend_test * net.msg_zerocopy.sh * net.rtnetlink.sh * netfilter.bridge_brouter.sh * netfilter.conntrack_icmp_related.sh * netfilter.nft_flowtable.sh * netfilter.nft_nat.sh * netfilter.nft_trans_stress.sh * pidfd.pidfd_wait * proc.proc-pid-vm * zram.zram.sh * bpf.test_xdp_veth.sh * bpf.test_bpftool_metadata.sh * cgroup.test_stress.sh * efivarfs.efivarfs.sh * fpu.run_test_fpu.sh * ir.ir_loopback.sh * kexec.test_kexec_load.sh * kexec.test_kexec_file_load.sh * kvm.mmio_warning_test * kvm.svm_vmcall_test * lkdtm.PANIC.sh * lkdtm.LOOP.sh * lkdtm.EXHAUST_STACK.sh * lkdtm.CORRUPT_STACK.sh * lkdtm.CORRUPT_STACK_STRONG.sh * lkdtm.DOUBLE_FAULT.sh * lkdtm.OVERWRITE_ALLOCATION.sh * lkdtm.WRITE_AFTER_FREE.sh * lkdtm.WRITE_BUDDY_AFTER_FREE.sh * lkdtm.SOFTLOCKUP.sh * lkdtm.HARDLOCKUP.sh * lkdtm.SPINLOCKUP.sh * lkdtm.HUNG_TASK.sh * lkdtm.REFCOUNT_TIMING.sh * lkdtm.ATOMIC_TIMING.sh * net.drop_monitor_tests.sh * net.mptcp.diag.sh * netfilter.ipvs.sh * netfilter.nft_conntrack_helper.sh * netfilter.nft_meta.sh * pstore.pstore_post_reboot_tests * tpm2.test_smoke.sh * tpm2.test_space.sh ### x86, kselftest-vsyscall-mode-none * breakpoints.breakpoint_test * breakpoints.step_after_suspend_test * net.msg_zerocopy.sh * net.rtnetlink.sh * netfilter.bridge_brouter.sh * netfilter.conntrack_icmp_related.sh * netfilter.nft_flowtable.sh * netfilter.nft_nat.sh * netfilter.nft_trans_stress.sh * pidfd.pidfd_wait * proc.proc-pid-vm * zram.zram.sh * bpf.test_xdp_veth.sh * bpf.test_bpftool_metadata.sh * cgroup.test_stress.sh * efivarfs.efivarfs.sh * fpu.run_test_fpu.sh * ir.ir_loopback.sh * kexec.test_kexec_load.sh * kexec.test_kexec_file_load.sh * kvm.mmio_warning_test * kvm.svm_vmcall_test * lkdtm.PANIC.sh * lkdtm.LOOP.sh * lkdtm.EXHAUST_STACK.sh * lkdtm.CORRUPT_STACK.sh * lkdtm.CORRUPT_STACK_STRONG.sh * lkdtm.DOUBLE_FAULT.sh * lkdtm.OVERWRITE_ALLOCATION.sh * lkdtm.WRITE_AFTER_FREE.sh * lkdtm.WRITE_BUDDY_AFTER_FREE.sh * lkdtm.SOFTLOCKUP.sh * lkdtm.HARDLOCKUP.sh * lkdtm.SPINLOCKUP.sh * lkdtm.HUNG_TASK.sh * lkdtm.REFCOUNT_TIMING.sh * lkdtm.ATOMIC_TIMING.sh * net.drop_monitor_tests.sh * net.mptcp.diag.sh * netfilter.ipvs.sh * netfilter.nft_conntrack_helper.sh * netfilter.nft_meta.sh * pstore.pstore_post_reboot_tests * tpm2.test_smoke.sh * tpm2.test_space.sh -- Linaro LKFT https://lkft.linaro.org

4 years, 3 months

1
0
0 0

[RFC v5 0/1] Selftest for cpuidle latency measurement

by Pratik Rajesh Sampat

v4: https://lkml.org/lkml/2020/9/2/356 v4-->v5 Based on comments from Artem Bityutskiy, evaluation of timer based wakeup latencies may not be a fruitful measurement especially on the x86 platform which has the capability to pre-arm a CPU when a timer is set. Hence, including only the IPI based tests for latency measurement to acheive expected behaviour across platforms. kernel module + bash selftest approach which presents lower deviations and higher accuracy: https://lkml.org/lkml/2020/7/21/567 --- The patch series introduces a mechanism to measure wakeup latency for IPI based interrupts. The motivation behind this series is to find significant deviations behind advertised latency values To achieve this in the userspace, IPI latencies are calculated by sending information through pipes and inducing a wakeup. To account for delays from kernel-userspace interactions baseline observations are taken on a 100% busy CPU and subsequent obervations must be considered relative to that. One downside of the userspace approach in contrast to the kernel implementation is that the run to run variance can turn out to be high in the order of ms; which is the scope of the experiments at times. Another downside of the userspace approach is that it takes much longer to run and hence a command-line option quick and full are added to make sure quick 1 CPU tests can be carried out when needed and otherwise it can carry out a full system comprehensive test. Usage --- ./cpuidle --mode <full / quick / num_cpus> --output <output location> full: runs on all CPUS quick: run on a random CPU num_cpus: Limit the number of CPUS to run on Sample output snippet --------------------- --IPI Latency Test--- SRC_CPU DEST_CPU IPI_Latency(ns) ... 0 5 256178 0 6 478161 0 7 285445 0 8 273553 Expected IPI latency(ns): 100000 Observed Average IPI latency(ns): 248334 Pratik Rajesh Sampat (1): selftests/cpuidle: Add support for cpuidle latency measurement tools/testing/selftests/Makefile | 1 + tools/testing/selftests/cpuidle/Makefile | 7 + tools/testing/selftests/cpuidle/cpuidle.c | 479 ++++++++++++++++++++++ tools/testing/selftests/cpuidle/settings | 1 + 4 files changed, 488 insertions(+) create mode 100644 tools/testing/selftests/cpuidle/Makefile create mode 100644 tools/testing/selftests/cpuidle/cpuidle.c create mode 100644 tools/testing/selftests/cpuidle/settings -- 2.26.2

4 years, 3 months

1
1
0 0

[PATCH v2 0/8] selftests/vm: gup_test, hmm-tests, assorted improvements

by John Hubbard

Changes since v1: * check_config.sh now invokes the compiler via the Makefile's ($CC), thanks to Jason Gunthorpe for calling that out. * Removed a misleading sentence from patch #6, as identified by Ira Weiny. * Removed a forward-looking sentence, about using -lpthread in gup_test.c soon, from the commit message in patch #4, since I'm not yet sure if my local pthread-based stress tests are actually worthwhile or not. Original cover letter, still accurate at this point: This is based on the latest mmotm. Summary: This series provides two main things, and a number of smaller supporting goodies. The two main points are: 1) Add a new sub-test to gup_test, which in turn is a renamed version of gup_benchmark. This sub-test allows nicer testing of dump_pages(), at least on user-space pages. For quite a while, I was doing a quick hack to gup_test.c whenever I wanted to try out changes to dump_page(). Then Matthew Wilcox asked me what I meant when I said "I used my dump_page() unit test", and I realized that it might be nice to check in a polished up version of that. Details about how it works and how to use it are in the commit description for patch #6. 2) Fixes a limitation of hmm-tests: these tests are incredibly useful, but only if people actually build and run them. And it turns out that libhugetlbfs is a little too effective at throwing a wrench in the works, there. So I've added a little configuration check that removes just two of the 21 hmm-tests, if libhugetlbfs is not available. Further details in the commit description of patch #8. Other smaller things that this series does: a) Remove code duplication by creating gup_test.h. b) Clear up the sub-test organization, and their invocation within run_vmtests.sh. c) Other minor assorted improvements. John Hubbard (8): mm/gup_benchmark: rename to mm/gup_test selftests/vm: use a common gup_test.h selftests/vm: rename run_vmtests --> run_vmtests.sh selftests/vm: minor cleanup: Makefile and gup_test.c selftests/vm: only some gup_test items are really benchmarks selftests/vm: gup_test: introduce the dump_pages() sub-test selftests/vm: run_vmtest.sh: update and clean up gup_test invocation selftests/vm: hmm-tests: remove the libhugetlbfs dependency Documentation/core-api/pin_user_pages.rst | 6 +- arch/s390/configs/debug_defconfig | 2 +- arch/s390/configs/defconfig | 2 +- mm/Kconfig | 21 +- mm/Makefile | 2 +- mm/{gup_benchmark.c => gup_test.c} | 109 ++++++---- mm/gup_test.h | 32 +++ tools/testing/selftests/vm/.gitignore | 3 +- tools/testing/selftests/vm/Makefile | 38 +++- tools/testing/selftests/vm/check_config.sh | 31 +++ tools/testing/selftests/vm/config | 2 +- tools/testing/selftests/vm/gup_benchmark.c | 137 ------------- tools/testing/selftests/vm/gup_test.c | 188 ++++++++++++++++++ tools/testing/selftests/vm/hmm-tests.c | 10 +- .../vm/{run_vmtests => run_vmtest.sh} | 24 ++- 15 files changed, 404 insertions(+), 203 deletions(-) rename mm/{gup_benchmark.c => gup_test.c} (59%) create mode 100644 mm/gup_test.h create mode 100755 tools/testing/selftests/vm/check_config.sh delete mode 100644 tools/testing/selftests/vm/gup_benchmark.c create mode 100644 tools/testing/selftests/vm/gup_test.c rename tools/testing/selftests/vm/{run_vmtests => run_vmtest.sh} (91%) -- 2.28.0

4 years, 3 months

2
10
0 0

Re: [PATCH v2 1/6] kselftests: vm: Add mremap tests

by Kalesh Singh

On Sat, Oct 3, 2020 at 3:13 AM John Hubbard <jhubbard(a)nvidia.com> wrote: > > On 10/2/20 9:20 AM, Kalesh Singh wrote: > > Test mremap on regions of various sizes and alignments and validate > > data after remapping. Also provide total time for remapping > > the region which is useful for performance comparison of the mremap > > optimizations that move pages at the PMD/PUD levels if HAVE_MOVE_PMD > > and/or HAVE_MOVE_PUD are enabled. > > > > Signed-off-by: Kalesh Singh <kaleshsingh(a)google.com> > > --- > > Changes in v2: > > - Reduce test time by only validating a certain threshold of the > > remapped region (4MB by default). The -t flag can be used to > > set a custom threshold in MB or no threshold by passing 0. (-t0). > > mremap time is not provided in stdout for only partially validated > > regions. This time is only applicable for comparison if the entire > > mapped region was faulted in. > > - Use a random pattern for validating the remapped region. The -p > > flag can be used to run the tests with a specified seed for the > > random pattern. > > - Print test configs (threshold_mb and pattern_seed) to stdout. > > - Remove MAKE_SIMPLE_TEST macro. > > - Define named flags instead of 0 / 1. > > - Add comments for destination address' align_mask and offset. > > Thanks for making those changes. This all looks much nicer, both in the > code and on the screen. Now it's easy to see which code generates which > output, and the tests are readable. The new comments are also helpful. > > I ran it locally and it came in at 0.6 sec, so that looks good. > > A remaining nit: there are lots of > 80 col lines here. Only those lines > that contain printf output strings really need to be extra-long. The > others can all be easily made to fit. Thanks for the review John. I can fix the lines that don't need to be >80 col. FWIW checkpatch now allows 100 col lines: https://lore.kernel.org/r/9c360bfa43580ce7726dd3d9d247f1216a690ef0.camel@pe… > > ... > > + > > +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) > > +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) > > > Not really a comment on this patch, but: at least two other test suites > in selftests/ have had to recreate MIN() or min(), and probably a few > other common things as well. It would be nice to gather up some of these > common things into one of the shared header files in selftests/. > > I'm certainly not saying that this patchset has that responsibility, > though. Just pointing it out in case someone has a moment to clean up a > few here and there. Thanks for pointing this out. I'll leave it as a task for a separate patch if time permits or no one gets around to it before :-) > > I'll assume that any changes to make things fit within 80 cols are > trivial, so you can add: > > Reviewed-by: John Hubbard <jhubbard(a)nvidia.com> > > thanks, > -- > John Hubbard > NVIDIA > > > + > > +struct config { > > + unsigned long long src_alignment; > > + unsigned long long dest_alignment; > > + unsigned long long region_size; > > + int overlapping; > > +}; > > + > > +struct test { > > + const char *name; > > + struct config config; > > + int expect_failure; > > +}; > > + > > +enum { > > + _1KB = 1ULL << 10, /* 1KB -> not page aligned */ > > + _4KB = 4ULL << 10, > > + _8KB = 8ULL << 10, > > + _1MB = 1ULL << 20, > > + _2MB = 2ULL << 20, > > + _4MB = 4ULL << 20, > > + _1GB = 1ULL << 30, > > + _2GB = 2ULL << 30, > > + PTE = _4KB, > > + PMD = _2MB, > > + PUD = _1GB, > > +}; > > + > > +#define MAKE_TEST(source_align, destination_align, size, \ > > + overlaps, should_fail, test_name) \ > > +{ \ > > + .name = test_name, \ > > + .config = { \ > > + .src_alignment = source_align, \ > > + .dest_alignment = destination_align, \ > > + .region_size = size, \ > > + .overlapping = overlaps, \ > > + }, \ > > + .expect_failure = should_fail \ > > +} > > + > > +/* > > + * Returns the start address of the mapping on success, else returns > > + * NULL on failure. > > + */ > > +static void *get_source_mapping(struct config c) > > +{ > > + unsigned long long addr = 0ULL; > > + void *src_addr = NULL; > > +retry: > > + addr += c.src_alignment; > > + src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE, > > + MAP_FIXED | MAP_ANONYMOUS | MAP_SHARED, -1, 0); > > + if (src_addr == MAP_FAILED) { > > + if (errno == EPERM) > > + goto retry; > > + goto error; > > + } > > + /* > > + * Check that the address is aligned to the specified alignment. Addresses > > + * which have alignments that are multiples of that specified are not considered > > + * valid. For instance, 1GB address is 2MB-aligned, however it will not be > > + * considered valid for a requested alignment of 2MB. This is done to > > + * reduce coincidental alignment in the tests. > > + */ > > + if (((unsigned long long) src_addr & (c.src_alignment - 1)) || > > + !((unsigned long long) src_addr & c.src_alignment)) > > + goto retry; > > + > > + if (!src_addr) > > + goto error; > > + > > + return src_addr; > > +error: > > + ksft_print_msg("Failed to map source region: %s\n", > > + strerror(errno)); > > + return NULL; > > +} > > + > > +/* Returns the time taken for the remap on success else returns -1. */ > > +static long long remap_region(struct config c, unsigned int threshold_mb, > > + char pattern_seed) > > +{ > > + void *addr, *src_addr, *dest_addr; > > + unsigned long long i; > > + struct timespec t_start = {0, 0}, t_end = {0, 0}; > > + long long start_ns, end_ns, align_mask, ret, offset; > > + unsigned long long threshold; > > + > > + if (threshold_mb == VALIDATION_NO_THRESHOLD) > > + threshold = c.region_size; > > + else > > + threshold = MIN(threshold_mb * _1MB, c.region_size); > > + > > + src_addr = get_source_mapping(c); > > + if (!src_addr) { > > + ret = -1; > > + goto out; > > + } > > + > > + /* Set byte pattern */ > > + srand(pattern_seed); > > + for (i = 0; i < threshold; i++) > > + memset((char *) src_addr + i, (char) rand(), 1); > > + > > + /* Mask to zero out lower bits of address for alignment */ > > + align_mask = ~(c.dest_alignment - 1); > > + /* Offset of destination address from the end of the source region */ > > + offset = (c.overlapping) ? -c.dest_alignment : c.dest_alignment; > > + addr = (void *) (((unsigned long long) src_addr + c.region_size + offset) > > + & align_mask); > > + > > + /* See comment in get_source_mapping() */ > > + if (!((unsigned long long) addr & c.dest_alignment)) > > + addr = (void *) ((unsigned long long) addr | c.dest_alignment); > > + > > + clock_gettime(CLOCK_MONOTONIC, &t_start); > > + dest_addr = mremap(src_addr, c.region_size, c.region_size, > > + MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr); > > + clock_gettime(CLOCK_MONOTONIC, &t_end); > > + > > + if (dest_addr == MAP_FAILED) { > > + ksft_print_msg("mremap failed: %s\n", strerror(errno)); > > + ret = -1; > > + goto clean_up_src; > > + } > > + > > + /* Verify byte pattern after remapping */ > > + srand(pattern_seed); > > + for (i = 0; i < threshold; i++) { > > + char c = (char) rand(); > > + > > + if (((char *) dest_addr)[i] != c) { > > + ksft_print_msg("Data after remap doesn't match at offset %d\n", > > + i); > > + ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff, > > + ((char *) dest_addr)[i] & 0xff); > > + ret = -1; > > + goto clean_up_dest; > > + } > > + } > > + > > + start_ns = t_start.tv_sec * NS_PER_SEC + t_start.tv_nsec; > > + end_ns = t_end.tv_sec * NS_PER_SEC + t_end.tv_nsec; > > + ret = end_ns - start_ns; > > + > > +/* > > + * Since the destination address is specified using MREMAP_FIXED, subsequent mremap will unmap any > > + * previous mapping at the address range specified by dest_addr and region_size. This significantly > > + * affects the remap time of subsequent tests. So we clean up mappings after each test. > > + */ > > +clean_up_dest: > > + munmap(dest_addr, c.region_size); > > +clean_up_src: > > + munmap(src_addr, c.region_size); > > +out: > > + return ret; > > +} > > + > > +static void run_mremap_test_case(struct test test_case, int *failures, unsigned int threshold_mb, > > + unsigned int pattern_seed) > > +{ > > + long long remap_time = remap_region(test_case.config, threshold_mb, pattern_seed); > > + > > + if (remap_time < 0) { > > + if (test_case.expect_failure) > > + ksft_test_result_pass("%s\n\tExpected mremap failure\n", test_case.name); > > + else { > > + ksft_test_result_fail("%s\n", test_case.name); > > + *failures += 1; > > + } > > + } else { > > + /* Comparing mremap time is only applicable if entire region was faulted in */ > > + if (threshold_mb == VALIDATION_NO_THRESHOLD || > > + test_case.config.region_size <= threshold_mb * _1MB) > > + ksft_test_result_pass("%s\n\tmremap time: %12lldns\n", > > + test_case.name, remap_time); > > + else > > + ksft_test_result_pass("%s\n", test_case.name); > > + } > > +} > > + > > +static void usage(const char *cmd) > > +{ > > + fprintf(stderr, > > + "Usage: %s [[-t <threshold_mb>] [-p <pattern_seed>]]\n" > > + "-t\t only validate threshold_mb of the remapped region\n" > > + " \t if 0 is supplied no threshold is used; all tests\n" > > + " \t are run and remapped regions validated fully.\n" > > + " \t The default threshold used is 4MB.\n" > > + "-p\t provide a seed to generate the random pattern for\n" > > + " \t validating the remapped region.\n", cmd); > > +} > > + > > +static int parse_args(int argc, char **argv, unsigned int *threshold_mb, > > + unsigned int *pattern_seed) > > +{ > > + const char *optstr = "t:p:"; > > + int opt; > > + > > + while ((opt = getopt(argc, argv, optstr)) != -1) { > > + switch (opt) { > > + case 't': > > + *threshold_mb = atoi(optarg); > > + break; > > + case 'p': > > + *pattern_seed = atoi(optarg); > > + break; > > + default: > > + usage(argv[0]); > > + return -1; > > + } > > + } > > + > > + if (optind < argc) { > > + usage(argv[0]); > > + return -1; > > + } > > + > > + return 0; > > +} > > + > > +int main(int argc, char **argv) > > +{ > > + int failures = 0; > > + int i, run_perf_tests; > > + unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD; > > + unsigned int pattern_seed; > > + time_t t; > > + > > + pattern_seed = (unsigned int) time(&t); > > + > > + if (parse_args(argc, argv, &threshold_mb, &pattern_seed) < 0) > > + exit(EXIT_FAILURE); > > + > > + ksft_print_msg("Test configs:\n\tthreshold_mb=%u\n\tpattern_seed=%u\n\n", > > + threshold_mb, pattern_seed); > > + > > + struct test test_cases[] = { > > + /* Expected mremap failures */ > > + MAKE_TEST(_4KB, _4KB, _4KB, OVERLAPPING, EXPECT_FAILURE, > > + "mremap - Source and Destination Regions Overlapping"), > > + MAKE_TEST(_4KB, _1KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE, > > + "mremap - Destination Address Misaligned (1KB-aligned)"), > > + MAKE_TEST(_1KB, _4KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE, > > + "mremap - Source Address Misaligned (1KB-aligned)"), > > + > > + /* Src addr PTE aligned */ > > + MAKE_TEST(PTE, PTE, _8KB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "8KB mremap - Source PTE-aligned, Destination PTE-aligned"), > > + > > + /* Src addr 1MB aligned */ > > + MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2MB mremap - Source 1MB-aligned, Destination PTE-aligned"), > > + MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned"), > > + > > + /* Src addr PMD aligned */ > > + MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "4MB mremap - Source PMD-aligned, Destination PTE-aligned"), > > + MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "4MB mremap - Source PMD-aligned, Destination 1MB-aligned"), > > + MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "4MB mremap - Source PMD-aligned, Destination PMD-aligned"), > > + > > + /* Src addr PUD aligned */ > > + MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2GB mremap - Source PUD-aligned, Destination PTE-aligned"), > > + MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2GB mremap - Source PUD-aligned, Destination 1MB-aligned"), > > + MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2GB mremap - Source PUD-aligned, Destination PMD-aligned"), > > + MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "2GB mremap - Source PUD-aligned, Destination PUD-aligned"), > > + }; > > + > > + struct test perf_test_cases[] = { > > + /* mremap 1GB region - Page table level aligned time comparison */ > > + MAKE_TEST(PTE, PTE, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "1GB mremap - Source PTE-aligned, Destination PTE-aligned"), > > + MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "1GB mremap - Source PMD-aligned, Destination PMD-aligned"), > > + MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, > > + "1GB mremap - Source PUD-aligned, Destination PUD-aligned"), > > + }; > > + > > + run_perf_tests = (threshold_mb == VALIDATION_NO_THRESHOLD) || > > + (threshold_mb * _1MB >= _1GB); > > + > > + ksft_set_plan(ARRAY_SIZE(test_cases) + (run_perf_tests ? > > + ARRAY_SIZE(perf_test_cases) : 0)); > > + > > + for (i = 0; i < ARRAY_SIZE(test_cases); i++) > > + run_mremap_test_case(test_cases[i], &failures, threshold_mb, pattern_seed); > > + > > + if (run_perf_tests) { > > + ksft_print_msg("\n%s\n", > > + "mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:"); > > + for (i = 0; i < ARRAY_SIZE(perf_test_cases); i++) > > + run_mremap_test_case(perf_test_cases[i], &failures, threshold_mb, > > + pattern_seed); > > + } > > + > > + if (failures > 0) > > + ksft_exit_fail(); > > + else > > + ksft_exit_pass(); > > +} > > diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests > > index a3f4f30f0a2e..d578ad831813 100755 > > --- a/tools/testing/selftests/vm/run_vmtests > > +++ b/tools/testing/selftests/vm/run_vmtests > > @@ -241,6 +241,17 @@ else > > echo "[PASS]" > > fi > > > > +echo "-------------------" > > +echo "running mremap_test" > > +echo "-------------------" > > +./mremap_test > > +if [ $? -ne 0 ]; then > > + echo "[FAIL]" > > + exitcode=1 > > +else > > + echo "[PASS]" > > +fi > > + > > echo "-----------------" > > echo "running thuge-gen" > > echo "-----------------" > > > > -- > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe(a)android.com. >

4 years, 3 months

1
0
0 0

[PATCH v2 0/6] Speed up mremap on large regions

by Kalesh Singh

This version 2 of the mremap speed up patches previously posted at: https://lore.kernel.org/r/20200930222130.4175584-1-kaleshsingh@google.com mremap time can be optimized by moving entries at the PMD/PUD level if the source and destination addresses are PMD/PUD-aligned and PMD/PUD-sized. Enable moving at the PMD and PUD levels on arm64 and x86. Other architectures where this type of move is supported and known to be safe can also opt-in to these optimizations by enabling HAVE_MOVE_PMD and HAVE_MOVE_PUD. Observed Performance Improvements for remapping a PUD-aligned 1GB-sized region on x86 and arm64: - HAVE_MOVE_PMD is already enabled on x86 : N/A - Enabling HAVE_MOVE_PUD on x86 : ~13x speed up - Enabling HAVE_MOVE_PMD on arm64 : ~ 8x speed up - Enabling HAVE_MOVE_PUD on arm64 : ~19x speed up Altogether, HAVE_MOVE_PMD and HAVE_MOVE_PUD give a total of ~150x speed up on arm64. Changes in v2: - Reduce mremap_test time by only validating a configurable threshold of the remapped region, as per John. - Use a random pattern for mremap validation. Provide pattern seed in test output, as per John. - Moved set_pud_at() to separate patch, per Kirill. - Use switch() instead of ifs in move_pgt_entry(), per Kirill. - Update commit message with description of Android garbage collector use case for HAVE_MOVE_PUD, as per Joel. - Fix build test error reported by kernel test robot in [1]. [1] https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/CKPGL4F… Kalesh Singh (6): kselftests: vm: Add mremap tests arm64: mremap speedup - Enable HAVE_MOVE_PMD mm: Speedup mremap on 1GB or larger regions arm64: Add set_pud_at() functions arm64: mremap speedup - Enable HAVE_MOVE_PUD x86: mremap speedup - Enable HAVE_MOVE_PUD arch/Kconfig | 7 + arch/arm64/Kconfig | 2 + arch/arm64/include/asm/pgtable.h | 1 + arch/x86/Kconfig | 1 + mm/mremap.c | 220 +++++++++++++-- tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 1 + tools/testing/selftests/vm/mremap_test.c | 333 +++++++++++++++++++++++ tools/testing/selftests/vm/run_vmtests | 11 + 9 files changed, 547 insertions(+), 30 deletions(-) create mode 100644 tools/testing/selftests/vm/mremap_test.c base-commit: 472e5b056f000a778abb41f1e443de58eb259783 -- 2.28.0.806.g8561365e88-goog

4 years, 3 months

2
11
0 0

[PATCH 0/1] selftests/vm: 8x compaction_test speedup

by John Hubbard

Hi, Maybe this should really be an RFC, given that I don't fully understand why the compaction_test.c program was mmap'ing 1 MB at a time. So apologies in advance if I've mucked up something important, but if so, maybe we can still find a way to get this fixed up to something better. Anyway: there are 20+ tests in tools/testing/selftests/vm/. The entire running time for these (via run_vmtest.sh) is about 56 seconds, of which over half is due to just one test: compaction_test, which takes 27 sec! (A runner-up is HMM, at 11 sec, so it's up for a look next.) The other tests mostly take a few ms, and a few take 1.0 sec. This drops the compaction_test run time from 27, to 3.3 sec. Enjoy. :) thanks, John Hubbard NVIDIA John Hubbard (1): selftests/vm: 8x compaction_test speedup tools/testing/selftests/vm/compaction_test.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) -- 2.28.0

4 years, 3 months

3
3
0 0

[PATCH] selftests/ftrace: check for do_sys_openat2 in user-memory test

by Colin King

From: Colin Ian King <colin.king(a)canonical.com> More recent libc implementations are now using openat/openat2 system calls so also add do_sys_openat2 to the tracing so that the test passes on these systems because do_sys_open may not be called. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- .../testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc index a30a9c07290d..cf1b4c3e9e6b 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc @@ -9,6 +9,8 @@ grep -A10 "fetcharg:" README | grep -q '\[u\]<offset>' || exit_unsupported :;: "user-memory access syntax and ustring working on user memory";: echo 'p:myevent do_sys_open path=+0($arg2):ustring path2=+u0($arg2):string' \ > kprobe_events +echo 'p:myevent2 do_sys_openat2 path=+0($arg2):ustring path2=+u0($arg2):string' \ + > kprobe_events grep myevent kprobe_events | \ grep -q 'path=+0($arg2):ustring path2=+u0($arg2):string' -- 2.27.0

4 years, 3 months

4
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror