- Linux-kselftest-mirror - lists.linaro.org

[PATCH] selftest: Fix spelling mistake "eith" -> "with"

by Colin Ian King

There is a spelling mistake in a ksft_test_result_fail message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/capabilities/test_execve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/capabilities/test_execve.c b/tools/testing/selftests/capabilities/test_execve.c index df0ef02b4036..5cc2481507a6 100644 --- a/tools/testing/selftests/capabilities/test_execve.c +++ b/tools/testing/selftests/capabilities/test_execve.c @@ -288,7 +288,7 @@ static int do_tests(int uid, const char *our_path) "PR_CAP_AMBIENT_RAISE isn't supported\n"); else ksft_test_result_fail( - "PR_CAP_AMBIENT_RAISE should have failed eith EPERM on a non-inheritable cap\n"); + "PR_CAP_AMBIENT_RAISE should have failed with EPERM on a non-inheritable cap\n"); return 1; } ksft_test_result_pass( -- 2.38.1

3 years

1
0
0 0

[PATCH -next 0/2] Add setup/cleanup for run.sh

by Zhao Gongyi

1. Add saving and restore of scaling_governor for cpus 2. Remove the tmp files before the test exit Zhao Gongyi (2): selftests/intel_pstate: Add saving and restore of scaling_governor selftests/intel_pstate: do cleanup at exit tools/testing/selftests/intel_pstate/run.sh | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) -- 2.17.1

3 years

1
2
0 0

[PATCH] selftests/powerpc: Fix resource leaks

by Miaoqian Lin

In check_all_cpu_dscr_defaults, opendir() opens the directory stream. Add missing closedir() in the error path to release it. In check_cpu_dscr_default, open() creates an open file descriptor. Add missing close() in the error path to release it. Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c index fbbdffdb2e5d..f20d1c166d1e 100644 --- a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c +++ b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c @@ -24,6 +24,7 @@ static int check_cpu_dscr_default(char *file, unsigned long val) rc = read(fd, buf, sizeof(buf)); if (rc == -1) { perror("read() failed"); + close(fd); return 1; } close(fd); @@ -65,8 +66,10 @@ static int check_all_cpu_dscr_defaults(unsigned long val) if (access(file, F_OK)) continue; - if (check_cpu_dscr_default(file, val)) + if (check_cpu_dscr_default(file, val)) { + closedir(sysfs); return 1; + } } closedir(sysfs); return 0; -- 2.25.1

3 years

2
1
0 0

[PATCH] selftests: powerpc: Use "grep -E" instead of "egrep"

by Tiezhu Yang

The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <yangtiezhu(a)loongson.cn> --- As Shuah suggested, this patch should go through powerpc/linux.git tools/testing/selftests/powerpc/scripts/hmi.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/scripts/hmi.sh b/tools/testing/selftests/powerpc/scripts/hmi.sh index dcdb392..bcc7b6b 100755 --- a/tools/testing/selftests/powerpc/scripts/hmi.sh +++ b/tools/testing/selftests/powerpc/scripts/hmi.sh @@ -36,7 +36,7 @@ trap "ppc64_cpu --smt-snooze-delay=100" 0 1 # for each chip+core combination # todo - less fragile parsing -egrep -o 'OCC: Chip [0-9a-f]+ Core [0-9a-f]' < /sys/firmware/opal/msglog | +grep -E -o 'OCC: Chip [0-9a-f]+ Core [0-9a-f]' < /sys/firmware/opal/msglog | while read chipcore; do chip=$(echo "$chipcore"|awk '{print $3}') core=$(echo "$chipcore"|awk '{print $5}') -- 2.1.0

3 years

2
1
0 0

[PATCH] selftests/tpm2: Split async tests call to separate shell script runner

by Nícolas F. R. A. Prado

When the async test case was introduced, despite being a completely independent test case, the command to run it was added to the same shell script as the smoke test case. Since a shell script implicitly returns the error code from the last run command, this effectively caused the script to only return as error code the result from the async test case, hiding the smoke test result (which could then only be seen from the python unittest logs). Move the async test case call to its own shell script runner to avoid the aforementioned issue. This also makes the output clearer to read, since each kselftest KTAP result now matches with one python unittest report. While at it, also make it so the async test case is skipped if /dev/tpmrm0 doesn't exist, since commit 8335adb8f9d3 ("selftests: tpm: add async space test with noneexisting handle") added a test that relies on it. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/tpm2/Makefile | 2 +- tools/testing/selftests/tpm2/test_async.sh | 10 ++++++++++ tools/testing/selftests/tpm2/test_smoke.sh | 1 - 3 files changed, 11 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/tpm2/test_async.sh diff --git a/tools/testing/selftests/tpm2/Makefile b/tools/testing/selftests/tpm2/Makefile index 1a5db1eb8ed5..a9bf9459fb25 100644 --- a/tools/testing/selftests/tpm2/Makefile +++ b/tools/testing/selftests/tpm2/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) include ../lib.mk -TEST_PROGS := test_smoke.sh test_space.sh +TEST_PROGS := test_smoke.sh test_space.sh test_async.sh TEST_PROGS_EXTENDED := tpm2.py tpm2_tests.py diff --git a/tools/testing/selftests/tpm2/test_async.sh b/tools/testing/selftests/tpm2/test_async.sh new file mode 100755 index 000000000000..43bf5bd772fd --- /dev/null +++ b/tools/testing/selftests/tpm2/test_async.sh @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +[ -e /dev/tpm0 ] || exit $ksft_skip +[ -e /dev/tpmrm0 ] || exit $ksft_skip + +python3 -m unittest -v tpm2_tests.AsyncTest diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 3e5ff29ee1dd..58af963e5b55 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -7,4 +7,3 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest -python3 -m unittest -v tpm2_tests.AsyncTest -- 2.38.1

3 years

3
2
0 0

fw_fallback.sh test failed in Debian 11

by Zhou, Jie2X

hi, fw_fallback.sh test failed. The error may caused by failed to write /sys/devices/virtual/misc/test_firmware/trigger_request. diff firmware/fw_fallback.sh_org firmware/fw_fallback.sh 165c164,165 < echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & --- > echo "echo -n \"nope-$NAME\" >\"$DIR\"/trigger_request &" > echo -n "nope-$NAME" >"$DIR"/trigger_request & # Test request_partial_firmware_into_buf() off=1 size=6 nofile: OK # Test request_partial_firmware_into_buf() off=2 size=10 nofile: OK # echo -n "nope-test-firmware.bin" >"/sys/devices/virtual/misc/test_firmware"/trigger_request & # ./fw_fallback.sh: line 165: echo: write error: No such file or directory # ./fw_fallback.sh: fallback mechanism immediately cancelled $ echo -n "nope-test-firmware.bin" >/sys/devices/virtual/misc/test_firmware/trigger_request -bash: echo: write error: No such file or directory test OS: Debian 11 test kernel: v6.1-rc6 test output: # ./fw_fallback.sh: fallback mechanism immediately cancelled # # The file never appeared: /sys/devices/virtual/misc/test_firmware/nope-test-firmware.bin/loading # # This might be a distribution udev rule setup by your distribution # to immediately cancel all fallback requests, this must be # removed before running these tests. To confirm look for # a firmware rule like /lib/udev/rules.d/50-firmware.rules # and see if you have something like this: # # SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1" # # If you do remove this file or comment out this line before # proceeding with these tests. not ok 1 selftests: firmware: fw_run_tests.sh # exit=1 There is not /lib/udev/rules.d/50-firmware.rules in Debian 11. How can fw_run_tests.sh run successfully in Debian 11? best regards,

3 years

4
10
0 0

[PATCH v14 00/39] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v14: - Rebase onto v5.18-rc3. v13: - Preserve ZA in both parent and child on clone() and add a test case for this. - Fix EFI integration for FA64. - Minor tweaks to the ABI document following Catlain's review. - Add and make use of thread_get_cur_vl() helper. - Fix some issues with SVE/FPSIMD register type moves in streaming SVE ptrace. - Typo fixes. - Roll in separately posted series extending ptrace coverage in kselftest for better integrated testing of the series. v12: - Fix some typos in the ABI document. - Print a message when we skip a vector length in the signal tests. - Add note of earliest toolchain versions with SME to manual encodings for future reference now that's landed. - Drop reference to PCS in sme.rst, it's not referenced and one of the links was broken. - Encode smstop and smstart as sysregs in the kernel. - Don't redundantly flush the SVE register state when loading FPSIMD state with SME enabled for the task, the architecture will do this for us. - Introduce and use task_get_cur_vl() to get the vector length for the currently active SVE registers. - Fix support for !FA64 mode in signal and syscall tests. - Simplify instruction sequence for ssve_regs signal test. - Actually include the ZA signal test in the patch set. v11: - Rebase onto v5.17-rc3. - Provide a sme-inst.h to collect manual encodings in kselftest. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (39): kselftest/arm64: Fix comment for ptrace_sve_get_fpsimd_data() kselftest/arm64: Remove assumption that tasks start FPSIMD only kselftest/arm64: Validate setting via FPSIMD and read via SVE regsets arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: Add manual encodings for SME instructions kselftest/arm64: sme: Add SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test selftests/arm64: Add a testcase for handling of ZA on clone() Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 24 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 123 +++- arch/arm64/include/asm/fpsimdmacros.h | 87 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 26 +- arch/arm64/include/asm/sysreg.h | 67 ++ arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 106 ++++ arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 585 ++++++++++++++++-- arch/arm64/kernel/process.c | 44 +- arch/arm64/kernel/ptrace.c | 358 +++++++++-- arch/arm64/kernel/signal.c | 188 +++++- arch/arm64/kernel/syscall.c | 29 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 11 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 79 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 204 +++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 5 + tools/testing/selftests/arm64/fp/Makefile | 19 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 10 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/sme-inst.h | 51 ++ tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 175 +++++- tools/testing/selftests/arm64/fp/sve-test.S | 20 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- .../testing/selftests/arm64/fp/za-fork-asm.S | 61 ++ tools/testing/selftests/arm64/fp/za-fork.c | 156 +++++ tools/testing/selftests/arm64/fp/za-ptrace.c | 356 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 388 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 3 + .../selftests/arm64/signal/test_signals.h | 4 + .../arm64/signal/test_signals_utils.c | 6 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 ++ .../arm64/signal/testcases/ssve_regs.c | 135 ++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- .../arm64/signal/testcases/za_regs.c | 128 ++++ 73 files changed, 4991 insertions(+), 191 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/sme-inst.h create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-fork-asm.S create mode 100644 tools/testing/selftests/arm64/fp/za-fork.c create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_regs.c base-commit: b2d229d4ddb17db541098b83524d901257e93845 -- 2.30.2

3 years

8
58
0 0

[PATCH 4/4] KVM: selftests: Allocate ucall pool from MEM_REGION_DATA

by Oliver Upton

MEM_REGION_TEST_DATA is meant to hold data explicitly used by a selftest, not implicit allocations due to the selftests infrastructure. Allocate the ucall pool from MEM_REGION_DATA much like the rest of the selftests library allocations. Fixes: 426729b2cf2e ("KVM: selftests: Add ucall pool based implementation") Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- tools/testing/selftests/kvm/lib/ucall_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/ucall_common.c b/tools/testing/selftests/kvm/lib/ucall_common.c index 820ce6c82829..0cc0971ce60e 100644 --- a/tools/testing/selftests/kvm/lib/ucall_common.c +++ b/tools/testing/selftests/kvm/lib/ucall_common.c @@ -22,7 +22,7 @@ void ucall_init(struct kvm_vm *vm, vm_paddr_t mmio_gpa) vm_vaddr_t vaddr; int i; - vaddr = vm_vaddr_alloc(vm, sizeof(*hdr), KVM_UTIL_MIN_VADDR); + vaddr = __vm_vaddr_alloc(vm, sizeof(*hdr), KVM_UTIL_MIN_VADDR, MEM_REGION_DATA); hdr = (struct ucall_header *)addr_gva2hva(vm, vaddr); memset(hdr, 0, sizeof(*hdr)); -- 2.39.0.rc0.267.gcb52ba06e7-goog

3 years

2
2
0 0

[PATCH 1/4] KVM: selftests: Fix build due to ucall_uninit() removal

by Oliver Upton

From: Mark Brown <broonie(a)kernel.org> Today's -next fails to build on arm64 due to: In file included from include/kvm_util.h:11, from aarch64/page_fault_test.c:15: include/ucall_common.h:36:47: note: expected ‘vm_paddr_t’ {aka ‘long unsigned int’} but argument is of type ‘void *’ 36 | void ucall_init(struct kvm_vm *vm, vm_paddr_t mmio_gpa); | ~~~~~~~~~~~^~~~~~~~ aarch64/page_fault_test.c:725:2: warning: implicit declaration of function ‘ucall_uninit’; did you mean ‘ucall_init’? [-Wimplicit-function-declaration] 725 | ucall_uninit(vm); | ^~~~~~~~~~~~ | ucall_init which is caused by commit interacting poorly with commit 28a65567acb5 ("KVM: selftests: Drop now-unnecessary ucall_uninit()") As is done for other ucall_uninit() users remove the call in the newly added page_fault_test.c. Fixes: 28a65567acb5 ("KVM: selftests: Drop now-unnecessary ucall_uninit()") Fixes: 35c581015712 ("KVM: selftests: aarch64: Add aarch64/page_fault_test") Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: Sean Christopherson <seanjc(a)google.com> Cc: Ricardo Koller <ricarkol(a)google.com> Cc: Marc Zyngier <maz(a)kernel.org> Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- tools/testing/selftests/kvm/aarch64/page_fault_test.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/kvm/aarch64/page_fault_test.c b/tools/testing/selftests/kvm/aarch64/page_fault_test.c index 0cda70bef5d5..92d3a91153b6 100644 --- a/tools/testing/selftests/kvm/aarch64/page_fault_test.c +++ b/tools/testing/selftests/kvm/aarch64/page_fault_test.c @@ -722,7 +722,6 @@ static void run_test(enum vm_guest_mode mode, void *arg) vcpu_run_loop(vm, vcpu, test); - ucall_uninit(vm); kvm_vm_free(vm); free_uffd(test, pt_uffd, data_uffd); -- 2.39.0.rc0.267.gcb52ba06e7-goog

3 years

1
0
0 0

[PATCH] kunit: tool: make parser preserve whitespace when printing test log

by Daniel Latypov

Currently, kunit_parser.py is stripping all leading whitespace to make parsing easier. But this means we can't accurately show kernel output for failing tests or when the kernel crashes. Embarassingly, this affects even KUnit's own output, e.g. [13:40:46] Expected 2 + 1 == 2, but [13:40:46] 2 + 1 == 3 (0x3) [13:40:46] not ok 1 example_simple_test [13:40:46] [FAILED] example_simple_test After this change, here's what the output in context would look like [13:40:46] =================== example (4 subtests) =================== [13:40:46] # example_simple_test: initializing [13:40:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29 [13:40:46] Expected 2 + 1 == 2, but [13:40:46] 2 + 1 == 3 (0x3) [13:40:46] [FAILED] example_simple_test [13:40:46] [SKIPPED] example_skip_test [13:40:46] [SKIPPED] example_mark_skipped_test [13:40:46] [PASSED] example_all_expect_macros_test [13:40:46] # example: initializing suite [13:40:46] # example: pass:1 fail:1 skip:2 total:4 [13:40:46] # Totals: pass:1 fail:1 skip:2 total:4 [13:40:46] ===================== [FAILED] example ===================== This example shows one minor cosmetic defect this approach has. The test counts lines prevent us from dedenting the suite-level output. But at the same time, any form of non-KUnit output would do the same unless it happened to be indented as well. Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- tools/testing/kunit/kunit.py | 2 +- tools/testing/kunit/kunit_parser.py | 27 +++++++++++++------------- tools/testing/kunit/kunit_tool_test.py | 2 ++ 3 files changed, 16 insertions(+), 15 deletions(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index e7b6549712d6..43fbe96318fe 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -202,7 +202,7 @@ def parse_tests(request: KunitParseRequest, metadata: kunit_json.Metadata, input if request.raw_output == 'all': pass elif request.raw_output == 'kunit': - output = kunit_parser.extract_tap_lines(output, lstrip=False) + output = kunit_parser.extract_tap_lines(output) for line in output: print(line.rstrip()) parse_time = time.time() - parse_start diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index 99b8f058db40..a225799f6b1b 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -13,6 +13,7 @@ from __future__ import annotations from dataclasses import dataclass import re import sys +import textwrap from enum import Enum, auto from typing import Iterable, Iterator, List, Optional, Tuple @@ -208,12 +209,12 @@ class LineStream: # Parsing helper methods: -KTAP_START = re.compile(r'KTAP version ([0-9]+)$') -TAP_START = re.compile(r'TAP version ([0-9]+)$') -KTAP_END = re.compile('(List of all partitions:|' +KTAP_START = re.compile(r'\s*KTAP version ([0-9]+)$') +TAP_START = re.compile(r'\s*TAP version ([0-9]+)$') +KTAP_END = re.compile(r'\s*(List of all partitions:|' 'Kernel panic - not syncing: VFS:|reboot: System halted)') -def extract_tap_lines(kernel_output: Iterable[str], lstrip=True) -> LineStream: +def extract_tap_lines(kernel_output: Iterable[str]) -> LineStream: """Extracts KTAP lines from the kernel output.""" def isolate_ktap_output(kernel_output: Iterable[str]) \ -> Iterator[Tuple[int, str]]: @@ -239,11 +240,8 @@ def extract_tap_lines(kernel_output: Iterable[str], lstrip=True) -> LineStream: # stop extracting KTAP lines break elif started: - # remove the prefix and optionally any leading - # whitespace. Our parsing logic relies on this. + # remove the prefix, if any. line = line[prefix_len:] - if lstrip: - line = line.lstrip() yield line_num, line return LineStream(lines=isolate_ktap_output(kernel_output)) @@ -298,7 +296,7 @@ def parse_ktap_header(lines: LineStream, test: Test) -> bool: lines.pop() return True -TEST_HEADER = re.compile(r'^# Subtest: (.*)$') +TEST_HEADER = re.compile(r'^\s*# Subtest: (.*)$') def parse_test_header(lines: LineStream, test: Test) -> bool: """ @@ -322,7 +320,7 @@ def parse_test_header(lines: LineStream, test: Test) -> bool: lines.pop() return True -TEST_PLAN = re.compile(r'1\.\.([0-9]+)') +TEST_PLAN = re.compile(r'^\s*1\.\.([0-9]+)') def parse_test_plan(lines: LineStream, test: Test) -> bool: """ @@ -350,9 +348,9 @@ def parse_test_plan(lines: LineStream, test: Test) -> bool: lines.pop() return True -TEST_RESULT = re.compile(r'^(ok|not ok) ([0-9]+) (- )?([^#]*)( # .*)?$') +TEST_RESULT = re.compile(r'^\s*(ok|not ok) ([0-9]+) (- )?([^#]*)( # .*)?$') -TEST_RESULT_SKIP = re.compile(r'^(ok|not ok) ([0-9]+) (- )?(.*) # SKIP(.*)$') +TEST_RESULT_SKIP = re.compile(r'^\s*(ok|not ok) ([0-9]+) (- )?(.*) # SKIP(.*)$') def peek_test_name_match(lines: LineStream, test: Test) -> bool: """ @@ -511,8 +509,9 @@ def print_test_header(test: Test) -> None: def print_log(log: Iterable[str]) -> None: """Prints all strings in saved log for test in yellow.""" - for m in log: - stdout.print_with_timestamp(stdout.yellow(m)) + formatted = textwrap.dedent('\n'.join(log)) + for line in formatted.splitlines(): + stdout.print_with_timestamp(stdout.yellow(line)) def format_test_result(test: Test) -> str: """ diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 1ef921ac4331..0c2190514103 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -336,12 +336,14 @@ class KUnitParserTest(unittest.TestCase): KTAP version 1 1..1 Test output. + Indented more. not ok 1 test1 """ result = kunit_parser.parse_run_tests(output.splitlines()) self.assertEqual(kunit_parser.TestStatus.FAILURE, result.status) self.print_mock.assert_any_call(StrContains('Test output.')) + self.print_mock.assert_any_call(StrContains(' Indented more.')) self.noPrintCallContains('not ok 1 test1') def line_stream_from_strs(strs: Iterable[str]) -> kunit_parser.LineStream: base-commit: 0f08f3e2a0186dfb8e33cb46105228eb18448a0e -- 2.38.1.584.g0f3c55d4c2-goog

3 years

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror