- Linux-kselftest-mirror - lists.linaro.org

txtimestamp.c:164:29: warning: format '0' expects argument of type 'long unsigned int', but argument 3 has type 'int64_t' {aka 'long long int'} [-Wformat=]

by Naresh Kamboju

While building selftests the following warnings were noticed for arm architecture on Linux stable v5.15.13 kernel and also on Linus's tree. arm-linux-gnueabihf-gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ txtimestamp.c -o /home/tuxbuild/.cache/tuxmake/builds/current/kselftest/net/txtimestamp txtimestamp.c: In function 'validate_timestamp': txtimestamp.c:164:29: warning: format '0' expects argument of type 'long unsigned int', but argument 3 has type 'int64_t' {aka 'long long int'} [-Wformat=] 164 | fprintf(stderr, "ERROR: 0 us expected between 0 and 0\n", | ~~^ | | | long unsigned int | 0 165 | cur64 - start64, min_delay, max_delay); | ~~~~~~~~~~~~~~~ | | | int64_t {aka long long int} txtimestamp.c: In function '__print_ts_delta_formatted': txtimestamp.c:173:22: warning: format '0' expects argument of type 'long unsigned int', but argument 3 has type 'int64_t' {aka 'long long int'} [-Wformat=] 173 | fprintf(stderr, "0 ns", ts_delta); | ~~^ ~~~~~~~~ | | | | | int64_t {aka long long int} | long unsigned int | 0 txtimestamp.c:175:22: warning: format '0' expects argument of type 'long unsigned int', but argument 3 has type 'int64_t' {aka 'long long int'} [-Wformat=] 175 | fprintf(stderr, "0 us", ts_delta / NSEC_PER_USEC); | ~~^ | | | long unsigned int | 0 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> build link: https://builds.tuxbuild.com/23HFntxpqyCx0RbiuadfGZ36Kym/ metadata: git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git git commit: 734eb1fd2073f503f5c6b44f1c0d453ca6986b84 git describe: v5.15.13 toolchain: gcc-11 kernel-config: https://builds.tuxbuild.com/23HFntxpqyCx0RbiuadfGZ36Kym/config # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake tuxmake --runtime podman --target-arch arm --toolchain gcc-10 \ --kconfig https://builds.tuxbuild.com/23HFntxpqyCx0RbiuadfGZ36Kym/config \ dtbs dtbs-legacy headers kernel kselftest kselftest-merge modules -- Linaro LKFT https://lkft.linaro.org

3 years

2
3
0 0

test_vsyscall.c:500:22: warning: '__builtin_memcmp_eq' specified bound 4096 exceeds source size 0

by Naresh Kamboju

While building selftests the following warnings were noticed for x86_64 architecture on Linux stable v5.15.13 kernel. metadata: git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git git commit: 734eb1fd2073f503f5c6b44f1c0d453ca6986b84 git describe: v5.15.13 toolchain": gcc-11 kernel-config: https://builds.tuxbuild.com/23HFo8abXIL6i4FFfSYiJlqAYMW/config x86_64-linux-gnu-gcc -m64 -o \ /home/tuxbuild/.cache/tuxmake/builds/current/kselftest/x86/test_vsyscall_64 \ -O2 -g -std=gnu99 -pthread -Wall -no-pie \ -DCAN_BUILD_64 test_vsyscall.c helpers.h -lrt -ldl test_vsyscall.c: In function 'test_process_vm_readv': test_vsyscall.c:500:22: warning: '__builtin_memcmp_eq' specified bound 4096 exceeds source size 0 [-Wstringop-overread] 500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Build link: https://builds.tuxbuild.com/23HFo8abXIL6i4FFfSYiJlqAYMW/ # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake tuxmake --runtime podman --target-arch x86_64 --toolchain gcc-11 \ --kconfig https://builds.tuxbuild.com/23HFo8abXIL6i4FFfSYiJlqAYMW/config \ cpupower headers kernel kselftest kselftest-merge modules -- Linaro LKFT https://lkft.linaro.org

3 years

2
3
0 0

[PATCH v4 net-next 0/3] net: bpf: handle return value of post_bind{4,6} and add selftests for it

by menglong8.dong＠gmail.com

From: Menglong Dong <imagedong(a)tencent.com> The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. The second patch is the selftests for this modification. The third patch use C99 initializers in test_sock.c. Changes since v3: - add the third patch which use C99 initializers in test_sock.c Changes since v2: - NULL check for sk->sk_prot->put_port Changes since v1: - introduce 'put_port' field for 'struct proto' - add selftests for it Menglong Dong (3): net: bpf: handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() bpf: selftests: add bind retry for post_bind{4, 6} bpf: selftests: use C99 initializers in test_sock.c include/net/sock.h | 1 + net/ipv4/af_inet.c | 2 + net/ipv4/ping.c | 1 + net/ipv4/tcp_ipv4.c | 1 + net/ipv4/udp.c | 1 + net/ipv6/af_inet6.c | 2 + net/ipv6/ping.c | 1 + net/ipv6/tcp_ipv6.c | 1 + net/ipv6/udp.c | 1 + tools/testing/selftests/bpf/test_sock.c | 370 ++++++++++++++---------- 10 files changed, 233 insertions(+), 148 deletions(-) -- 2.27.0

3 years

2
4
0 0

[PATCH v5 00/21] AMX Support in KVM

by Yang Zhong

Thanks a lot for all the review comments and guidance! Hope this version is in a good state now. :) (Jing is temporarily leave for family reason, Yang helped work out this version) ---- v4->v5: - Directly call fpu core to expand fpstate buffer in kvm_check_cpuid() and remove duplicated permission check there (Sean) - Accordingly remove Thomas's reviewed-by as a different wrapper is introduced now (patch-7) - Properly queue #NM exception in nested scenario (Sean) - Verify non-XFD related #NM usage in nested scenario (Sean) - Hide XFD in kvm_cpu_cap on 32bit host kernels (Sean) - Use xstate_required_size() in KVM_CAP_XSAVE2 which may be called before any vcpu is created (Sean/Paolo) - Replace boot_cpu_has with kvm_cpu_cap_has when disabling RDMSR interception for xfd_err (Sean) v3->v4: - Verify kvm selftest for AMX (Paolo) - Expand fpstate buffer in kvm_check_cpuid() and improve patch description (Sean) - Drop 'preemption' word in #NM interception patch (Sean) - Remove 'trap_nm' flag. Replace it by: (Sean) * Trapping #NM according to guest_fpu::xfd when write to xfd is intercepted. * Always trapping #NM when xfd write interception is disabled - Use better name for #NM related functions (Sean) - Drop '#ifdef CONFIG_X86_64' in __kvm_set_xcr (Sean) - Update description for KVM_CAP_XSAVE2 and prevent the guest from using the wrong ioctl (Sean) - Replace 'xfd_out_of_sync' with a better name (Sean) v2->v3: - Trap #NM until write IA32_XFD with a non-zero value (Thomas) - Revise return value in __xstate_request_perm() (Thomas) - Revise doc for KVM_GET_SUPPORTED_CPUID (Paolo) - Add Thomas's reviewed-by on one patch - Reorder disabling read interception of XFD_ERR patch (Paolo) - Move disabling r/w interception of XFD from x86.c to vmx.c (Paolo) - Provide the API doc together with the new KVM_GET_XSAVE2 ioctl (Paolo) - Make KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) return minimum size of struct kvm_xsave (4K) (Paolo) - Request permission at the start of vm_create_with_vcpus() in selftest - Request permission conditionally when XFD is supported (Paolo) v1->v2: - Live migration supported and verified with a selftest - Rebase to Thomas's new series for guest fpstate reallocation [1] - Expand fpstate at KVM_SET_CPUID2 instead of when emulating XCR0 and IA32_XFD (Thomas/Paolo) - Accordingly remove all exit-to-userspace stuff - Intercept #NM to save guest XFD_ERR and restore host/guest value at preemption on/off boundary (Thomas) - Accordingly remove all xfd_err logic in preemption callback and fpu_swap_kvm_fpstate() - Reuse KVM_SET_XSAVE to handle both legacy and expanded buffer (Paolo) - Don't return dynamic bits w/o prctl() in KVM_GET_SUPPORTED_CPUID (Paolo) - Check guest permissions for dynamic features in CPUID[0xD] instead of only for AMX at KVM_SET_CPUID (Paolo) - Remove dynamic bit check for 32-bit guest in __kvm_set_xcr() (Paolo) - Fix CPUID emulation for 0x1d and 0x1e (Paolo) - Move "disable interception" to the end of the series (Paolo) This series brings AMX (Advanced Matrix eXtensions) virtualization support to KVM. The preparatory series from Thomas [1] is also included. A large portion of the changes in this series is to deal with eXtended Feature Disable (XFD) which allows resizing of the fpstate buffer to support dynamically-enabled XSTATE features with large state component (e.g. 8K for AMX). There are a lot of simplications when comparing v5 to the original proposal [2] and the first version [3]. Thanks to Thomas, Paolo and Sean for many good suggestions. The support is based on following key changes: - Guest permissions for dynamically-enabled XSAVE features Native tasks have to request permission via prctl() before touching a dynamic-resized XSTATE compoenent. Introduce guest permissions for the similar purpose. Userspace VMM is expected to request guest permission only once when the first vCPU is created. KVM checks guest permission in KVM_SET_CPUID2. Setting XFD in guest cpuid w/o proper permissions fails this operation. In the meantime, unpermitted features are also excluded in KVM_GET_SUPPORTED_CPUID. - Extend fpstate reallocation mechanism to cover guest fpu Unlike native tasks which have reallocation triggered from #NM handler, guest fpstate reallocation is requested by KVM when it identifies the intention on using dynamically-enabled XSAVE features inside guest. Extend fpu core to allow KVM request fpstate buffer expansion for a guest fpu containter. - Trigger fpstate reallocation in KVM This could be done either before guest runs or until xfd is updated in the emulation path. According to discussion [1] we decide to go the former option in KVM_SET_CPUID2, with fpstate buffer sized accordingly. This spares a lot of code and also avoid imposing an ordered restore sequence (XCR0, XFD and XSTATE) to userspace VMM. - RDMSR/WRMSR emulation for IA32_XFD Because fpstate expansion is completed in KVM_SET_CPUID2, emulating r/w access to IA32_XFD simply involves the xfd field in the guest fpu container. If write and guest fpu is currently active, the software state (guest_fpstate::xfd and per-cpu xfd cache) is also updated. - RDMSR/WRMSR emulation for XFD_ERR When XFD causes an instruction to generate #NM, XFD_ERR contains information about which disabled state components are being accessed. It'd be problematic if the XFD_ERR value generated in guest is consumed/clobbered by the host before the guest itself doing so. Intercept #NM exception to save the guest XFD_ERR value when write IA32_XFD with a non-zero value for 1st time. There is at most one interception per guest task given a dynamic feature. RDMSR/WRMSR emulation uses the saved value. The host value (always ZERO outside of the host #NM handler) is restored before enabling interrupts. The saved guest value is restored right before entering the guest (with interrupts disabled). - Get/set dynamic xfeature state for migration Introduce new capability (KVM_CAP_XSAVE2) to deal with >4KB fpstate buffer. Reading this capability returns the size of the current guest fpstate (e.g. after expansion). Userspace VMM uses a new ioctl (KVM_GET_XSAVE2) to read guest fpstate from the kernel and reuses the existing ioctl (KVM_SET_XSAVE) to update guest fpsate to the kernel. KVM_SET_XSAVE is extended to do properly_sized memdup_user() based on the guest fpstate. - Expose related cpuid bits to guest The last step is to allow exposing XFD, AMX_TILE, AMX_INT8 and AMX_BF16 in guest cpuid. Adding those bits into kvm_cpu_caps finally activates all previous logics in this series - Optimization: disable interception for IA32_XFD IA32_XFD can be frequently updated by the guest, as it is part of the task state and swapped in context switch when prev and next have different XFD setting. Always intercepting WRMSR can easily cause non-negligible overhead. Disable r/w emulation for IA32_XFD after intercepting the first WRMSR(IA32_XFD) with a non-zero value. However MSR passthrough implies the software state (guest_fpstate::xfd and per-cpu xfd cache) might be out of sync with MSR. This suggests KVM needs to re-sync them at VM-exit before preemption is enabled. Thanks Jun Nakajima and Kevin Tian for the design suggestions when this was being internally worked on. [1] https://lore.kernel.org/all/20211214022825.563892248@linutronix.de/ [2] https://www.spinics.net/lists/kvm/msg259015.html [3] https://lore.kernel.org/lkml/20211208000359.2853257-1-yang.zhong@intel.com/ Thanks, Yang ---- Guang Zeng (1): kvm: x86: Add support for getting/setting expanded xstate buffer Jing Liu (11): kvm: x86: Fix xstate_required_size() to follow XSTATE alignment rule kvm: x86: Exclude unpermitted xfeatures at KVM_GET_SUPPORTED_CPUID x86/fpu: Make XFD initialization in __fpstate_reset() a function argument kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 kvm: x86: Add emulation for IA32_XFD x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Add CPUID support for Intel AMX Kevin Tian (2): x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Disable interception for IA32_XFD on demand Sean Christopherson (1): x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM Thomas Gleixner (5): x86/fpu: Extend fpu_xstate_prctl() with guest permissions x86/fpu: Prepare guest FPU for dynamically enabled FPU features x86/fpu: Add guest support to xfd_enable_feature() x86/fpu: Add uabi_size to guest_fpu x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() Wei Wang (1): kvm: selftests: Add support for KVM_CAP_XSAVE2 Documentation/virt/kvm/api.rst | 46 +++++- arch/x86/include/asm/cpufeatures.h | 2 + arch/x86/include/asm/fpu/api.h | 11 ++ arch/x86/include/asm/fpu/types.h | 32 ++++ arch/x86/include/asm/kvm_host.h | 1 + arch/x86/include/uapi/asm/kvm.h | 16 +- arch/x86/include/uapi/asm/prctl.h | 26 ++-- arch/x86/kernel/fpu/core.c | 94 ++++++++++- arch/x86/kernel/fpu/xstate.c | 147 +++++++++++------- arch/x86/kernel/fpu/xstate.h | 15 +- arch/x86/kernel/process.c | 2 + arch/x86/kvm/cpuid.c | 86 +++++++--- arch/x86/kvm/cpuid.h | 2 + arch/x86/kvm/vmx/vmcs.h | 5 + arch/x86/kvm/vmx/vmx.c | 68 ++++++++ arch/x86/kvm/vmx/vmx.h | 2 +- arch/x86/kvm/x86.c | 112 ++++++++++++- include/uapi/linux/kvm.h | 4 + tools/arch/x86/include/uapi/asm/kvm.h | 16 +- tools/include/uapi/linux/kvm.h | 3 + .../testing/selftests/kvm/include/kvm_util.h | 2 + .../selftests/kvm/include/x86_64/processor.h | 10 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 32 ++++ .../selftests/kvm/lib/x86_64/processor.c | 67 +++++++- .../testing/selftests/kvm/x86_64/evmcs_test.c | 2 +- tools/testing/selftests/kvm/x86_64/smm_test.c | 2 +- .../testing/selftests/kvm/x86_64/state_test.c | 2 +- .../kvm/x86_64/vmx_preemption_timer_test.c | 2 +- 28 files changed, 702 insertions(+), 107 deletions(-)

3 years

5
30
0 0

[RFC PATCH 00/10] KVM: selftests: Add support for test-selectable ucall implementations

by Michael Roth

These patches are based on kvm/next, and are also available at: https://github.com/mdroth/linux/commits/sev-selftests-ucall-rfc1 == BACKGROUND == These patches are a prerequisite for adding selftest support for SEV guests and possibly other confidential computing implementations in the future. They were motivated by a suggestion Paolo made in response to the initial SEV selftest RFC: https://lore.kernel.org/lkml/20211025035833.yqphcnf5u3lk4zgg@amd.com/T/#m95… Since the changes touch multiple archs and ended up creating a bit more churn than expected, I thought it would be a good idea to carve this out into a separate standalone series for reviewers who may be more interested in the ucall changes than anything SEV-related. To summarize, x86 relies on a ucall based on using PIO intructions to generate an exit to userspace and provide the GVA of a dynamically-allocated ucall struct that resides in guest memory and contains information about how to handle/interpret the exit. This doesn't work for SEV guests for 3 main reasons: 1) The guest memory is generally encrypted during run-time, so the guest needs to ensure the ucall struct is allocated in shared memory. 2) The guest page table is also encrypted, so the address would need to be a GPA instead of a GVA. 3) The guest vCPU register may also be encrypted in the case of SEV-ES/SEV-SNP, so the approach of examining vCPU register state has additional requirements such as requiring guest code to implement a #VC handler that can provide the appropriate registers via a vmgexit. To address these issues, the SEV selftest RFC1 patchset introduced a set of new SEV-specific interfaces that closely mirrored the functionality of ucall()/get_ucall(), but relied on a pre-allocated/static ucall buffer in shared guest memory so it that guest code could pass messages/state to the host by simply writing to this pre-arranged shared memory region and then generating an exit to userspace (via a halt instruction). Paolo suggested instead implementing support for test/guest-specific ucall implementations that could be used as an alternative to the default PIO-based ucall implementations as-needed based on test/guest requirements, while still allowing for tests to use a common set interfaces like ucall()/get_ucall(). == OVERVIEW == This series implements the above functionality by introducing a new ucall_ops struct that can be used to register a particular ucall implementation as need, then re-implements x86/arm64/s390x in terms of the ucall_ops. But for the purposes of introducing a new ucall_ops implementation appropriate for SEV, there are a couple issues that resulted in the need for some additional ucall interfaces as well: a) ucall() doesn't take a pointer to the ucall struct it modifies, so to make it work in the case of an implementation that relies a pre-allocated ucall struct in shared guest memory some sort of global lookup functionality would be needed to locate the appropriate ucall struct for a particular VM/vcpu combination, and this would need to be made accessible for use by the guest as well. guests would then need some way of determining what VM/vcpu identifiers they need to use to do the lookup, which to do reliably would likely require seeding the guest with those identifiers in advance, which is possible, but much more easily achievable by simply adding a ucall() alternative that accepts a pointer to the ucall struct for that particular VM/vcpu. b) get_ucall() *does* take a pointer to a ucall struct, but currently zeroes it out and uses it to copy the guest's ucall struct into. It *could* be re-purposed to handle the case where the pointer is an actual pointer to the ucall struct in shared guest memory, but that could cause problems since callers would need some idea of what the underlying ucall implementation expects. Ideally the interfaces would be agnostic to the ucall implementation. So to address those issues, this series also allows ucall implementations to optionally be extended to support a set of 'shared' ops that are used in the following manner: host: uc_gva = ucall_shared_alloc() setup_vm_args(vm, uc_gva) guest: ucall_shared(uc_gva, ...) host: uget_ucall_shared(uc_gva, ...) and then implements a new ucall implementation, ucall_ops_halt, based around these shared interfaces and halt instructions. While this doesn't really meet the initial goal of re-using the existing ucall interfaces as-is, the hope is that these *_shared interfaces are general enough to be re-usable things other than SEV, or at least improve on code readability over the initial SEV-specific interfaces. Any review/comments are greatly appreciated! ---------------------------------------------------------------- Michael Roth (10): kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h kvm: selftests: move ucall declarations into ucall_common.h kvm: selftests: introduce ucall_ops for test/arch-specific ucall implementations kvm: arm64: selftests: use ucall_ops to define default ucall implementation (COMPILE-TESTED ONLY) kvm: s390: selftests: use ucall_ops to define default ucall implementation kvm: selftests: add ucall interfaces based around shared memory kvm: selftests: add ucall_shared ops for PIO kvm: selftests: introduce ucall implementation based on halt instructions kvm: selftests: add GUEST_SHARED_* macros for shared ucall implementations kvm: selftests: add ucall_test to test various ucall functionality tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 5 +- .../testing/selftests/kvm/include/aarch64/ucall.h | 18 + tools/testing/selftests/kvm/include/kvm_util.h | 408 +-------------------- .../testing/selftests/kvm/include/kvm_util_base.h | 368 +++++++++++++++++++ tools/testing/selftests/kvm/include/s390x/ucall.h | 18 + tools/testing/selftests/kvm/include/ucall_common.h | 147 ++++++++ tools/testing/selftests/kvm/include/x86_64/ucall.h | 19 + tools/testing/selftests/kvm/lib/aarch64/ucall.c | 43 +-- tools/testing/selftests/kvm/lib/s390x/ucall.c | 45 +-- tools/testing/selftests/kvm/lib/ucall_common.c | 133 +++++++ tools/testing/selftests/kvm/lib/x86_64/ucall.c | 82 +++-- tools/testing/selftests/kvm/ucall_test.c | 182 +++++++++ 13 files changed, 982 insertions(+), 487 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/aarch64/ucall.h create mode 100644 tools/testing/selftests/kvm/include/kvm_util_base.h create mode 100644 tools/testing/selftests/kvm/include/s390x/ucall.h create mode 100644 tools/testing/selftests/kvm/include/ucall_common.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/ucall.h create mode 100644 tools/testing/selftests/kvm/lib/ucall_common.c create mode 100644 tools/testing/selftests/kvm/ucall_test.c

3 years

4
22
0 0

[PATCH 2/2] selftests: tpm: add async space test with noneexisting handle

by Tadeusz Struk

Add a test for tpm2 spaces in async mode that checks if the code handles invalid handles correctly. Cc: Jarkko Sakkinen <jarkko(a)kernel.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: <linux-integrity(a)vger.kernel.org> Cc: <linux-kselftest(a)vger.kernel.org> Cc: <linux-kernel(a)vger.kernel.org> Signed-off-by: Tadeusz Struk <tstruk(a)gmail.com> --- tools/testing/selftests/tpm2/tpm2_tests.py | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py index 9d764306887b..b373b0936e40 100644 --- a/tools/testing/selftests/tpm2/tpm2_tests.py +++ b/tools/testing/selftests/tpm2/tpm2_tests.py @@ -302,3 +302,19 @@ class AsyncTest(unittest.TestCase): log.debug("Calling get_cap in a NON_BLOCKING mode") async_client.get_cap(tpm2.TPM2_CAP_HANDLES, tpm2.HR_LOADED_SESSION) async_client.close() + + def test_flush_invlid_context(self): + log = logging.getLogger(__name__) + log.debug(sys._getframe().f_code.co_name) + + async_client = tpm2.Client(tpm2.Client.FLAG_SPACE | tpm2.Client.FLAG_NONBLOCK) + log.debug("Calling flush_context passing in an invalid handle ") + handle = 0x80123456 + rc = 0 + try: + async_client.flush_context(handle) + except OSError as e: + rc = e.errno + + self.assertEqual(rc, 22) + async_client.close() -- 2.30.2

3 years

2
1
0 0

[PATCH net] selftests: set amt.sh executable

by Taehee Yoo

amt.sh test script will not work because it doesn't have execution permission. So, it adds execution permission. Reported-by: Hangbin Liu <liuhangbin(a)gmail.com> Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073(a)gmail.com> --- tools/testing/selftests/net/amt.sh | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 tools/testing/selftests/net/amt.sh diff --git a/tools/testing/selftests/net/amt.sh b/tools/testing/selftests/net/amt.sh old mode 100644 new mode 100755 -- 2.17.1

3 years

2
1
0 0

[PATCH 1/3] selftest/kexec: fix "ignored null byte in input" warning

by Nageswara R Sastry

From: Mimi Zohar <zohar(a)linux.ibm.com> Instead of assigning the string to a variable, which might contain a null character, redirect the output and grep for the string directly. Signed-off-by: Mimi Zohar <zohar(a)linux.ibm.com> --- tools/testing/selftests/kexec/test_kexec_file_load.sh | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kexec/test_kexec_file_load.sh b/tools/testing/selftests/kexec/test_kexec_file_load.sh index 2ff600388c30..99f6fc23ee31 100755 --- a/tools/testing/selftests/kexec/test_kexec_file_load.sh +++ b/tools/testing/selftests/kexec/test_kexec_file_load.sh @@ -97,10 +97,11 @@ check_for_imasig() check_for_modsig() { local module_sig_string="~Module signature appended~" - local sig="$(tail --bytes $((${#module_sig_string} + 1)) $KERNEL_IMAGE)" local ret=0 - if [ "$sig" == "$module_sig_string" ]; then + tail --bytes $((${#module_sig_string} + 1)) $KERNEL_IMAGE | \ + grep -q "$module_sig_string" + if [ $? -eq 0 ]; then ret=1 log_info "kexec kernel image modsig signed" else -- 2.23.0

3 years

3
4
0 0

[PATCH v3 net-next 0/2] net: bpf: handle return value of post_bind{4,6} and add selftests for it

by menglong8.dong＠gmail.com

From: Menglong Dong <imagedong(a)tencent.com> The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. The second patch is the selftests for this modification. Changes since v2: - NULL check for sk->sk_prot->put_port Changes since v1: - introduce 'put_port' field for 'struct proto' - add selftests for it Menglong Dong (2): net: bpf: handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() bpf: selftests: add bind retry for post_bind{4, 6} include/net/sock.h | 1 + net/ipv4/af_inet.c | 2 + net/ipv4/ping.c | 1 + net/ipv4/tcp_ipv4.c | 1 + net/ipv4/udp.c | 1 + net/ipv6/af_inet6.c | 2 + net/ipv6/ping.c | 1 + net/ipv6/tcp_ipv6.c | 1 + net/ipv6/udp.c | 1 + tools/testing/selftests/bpf/test_sock.c | 166 +++++++++++++++++++++--- 10 files changed, 157 insertions(+), 20 deletions(-) -- 2.27.0

3 years

3
4
0 0

[PATCH v4 00/21] AMX Support in KVM

by Yang Zhong

Highly appreciate for your review. This version mostly addressed the comments from Sean. Most comments are adopted except three which are not closed and need more discussions: - Move the entire xfd write emulation code to x86.c. Doing so requires introducing a new kvm_x86_ops callback to disable msr write bitmap. According to Paolo's earlier comment he prefers to handle it in vmx.c. - Directly check msr_bitmap in update_exception_bitmap() (for trapping #NM) and vcpu_enter_guest() (for syncing guest xfd after vm-exit) instead of introducing an extra flag in the last patch. However, doing so requires another new kvm_x86_ops callback for checking msr_bitmap since vcpu_enter_guest() is x86 common code. Having an extra flag sounds simpler here (at least for the initial AMX support). It does penalize nested guest with one xfd sync per exit, but it's not worse than a normal guest which initializes xfd but doesn't run AMX applications at all. Those could be improved afterwards. - Disable #NM trap for nested guest. This version still chooses to always trap #NM (regardless in L1 or L2) as long as xfd write interception is disabled. In reality #NM is rare if nested guest doesn't intend to run AMX applications and always-trap is safer than dynamic trap for the basic support in case of any oversight here. (Jing is temporarily leave for family reason, Yang helped work out this version) ---- v3->v4: - Verify kvm selftest for AMX (Paolo) - Move fpstate buffer expansion from kvm_vcpu_after_set_cpuid () to kvm_check_cpuid() and improve patch description (Sean) - Drop 'preemption' word in #NM interception patch (Sean) - Remove 'trap_nm' flag. Replace it by: (Sean) * Trapping #NM according to guest_fpu::xfd when write to xfd is intercepted. * Always trapping #NM when xfd write interception is disabled - Use better name for #NM related functions (Sean) - Drop '#ifdef CONFIG_X86_64' in __kvm_set_xcr (Sean) - Update description for KVM_CAP_XSAVE2 and prevent the guest from using the wrong ioctl (Sean) - Replace 'xfd_out_of_sync' with a better name (Sean) v2->v3: - Trap #NM until write IA32_XFD with a non-zero value (Thomas) - Revise return value in __xstate_request_perm() (Thomas) - Revise doc for KVM_GET_SUPPORTED_CPUID (Paolo) - Add Thomas's reviewed-by on one patch - Reorder disabling read interception of XFD_ERR patch (Paolo) - Move disabling r/w interception of XFD from x86.c to vmx.c (Paolo) - Provide the API doc together with the new KVM_GET_XSAVE2 ioctl (Paolo) - Make KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) return minimum size of struct kvm_xsave (4K) (Paolo) - Request permission at the start of vm_create_with_vcpus() in selftest - Request permission conditionally when XFD is supported (Paolo) v1->v2: - Live migration supported and verified with a selftest - Rebase to Thomas's new series for guest fpstate reallocation [1] - Expand fpstate at KVM_SET_CPUID2 instead of when emulating XCR0 and IA32_XFD (Thomas/Paolo) - Accordingly remove all exit-to-userspace stuff - Intercept #NM to save guest XFD_ERR and restore host/guest value at preemption on/off boundary (Thomas) - Accordingly remove all xfd_err logic in preemption callback and fpu_swap_kvm_fpstate() - Reuse KVM_SET_XSAVE to handle both legacy and expanded buffer (Paolo) - Don't return dynamic bits w/o prctl() in KVM_GET_SUPPORTED_CPUID (Paolo) - Check guest permissions for dynamic features in CPUID[0xD] instead of only for AMX at KVM_SET_CPUID (Paolo) - Remove dynamic bit check for 32-bit guest in __kvm_set_xcr() (Paolo) - Fix CPUID emulation for 0x1d and 0x1e (Paolo) - Move "disable interception" to the end of the series (Paolo) This series brings AMX (Advanced Matrix eXtensions) virtualization support to KVM. The preparatory series from Thomas [1] is also included. A large portion of the changes in this series is to deal with eXtended Feature Disable (XFD) which allows resizing of the fpstate buffer to support dynamically-enabled XSTATE features with large state component (e.g. 8K for AMX). There are a lot of simplications when comparing v2/v3 to the original proposal [2] and the first version [3]. Thanks to Thomas and Paolo for many good suggestions. The support is based on following key changes: - Guest permissions for dynamically-enabled XSAVE features Native tasks have to request permission via prctl() before touching a dynamic-resized XSTATE compoenent. Introduce guest permissions for the similar purpose. Userspace VMM is expected to request guest permission only once when the first vCPU is created. KVM checks guest permission in KVM_SET_CPUID2. Setting XFD in guest cpuid w/o proper permissions fails this operation. In the meantime, unpermitted features are also excluded in KVM_GET_SUPPORTED_CPUID. - Extend fpstate reallocation mechanism to cover guest fpu Unlike native tasks which have reallocation triggered from #NM handler, guest fpstate reallocation is requested by KVM when it identifies the intention on using dynamically-enabled XSAVE features inside guest. Extend fpu core to allow KVM request fpstate buffer expansion for a guest fpu containter. - Trigger fpstate reallocation in KVM This could be done either statically (before guest runs) or dynamically (in the emulation path). According to discussion [1] we decide to statically enable all xfeatures allowed by guest perm in KVM_SET_CPUID2, with fpstate buffer sized accordingly. This spares a lot of code and also avoid imposing an ordered restore sequence (XCR0, XFD and XSTATE) to userspace VMM. - RDMSR/WRMSR emulation for IA32_XFD Because fpstate expansion is completed in KVM_SET_CPUID2, emulating r/w access to IA32_XFD simply involves the xfd field in the guest fpu container. If write and guest fpu is currently active, the software state (guest_fpstate::xfd and per-cpu xfd cache) is also updated. - RDMSR/WRMSR emulation for XFD_ERR When XFD causes an instruction to generate #NM, XFD_ERR contains information about which disabled state components are being accessed. It'd be problematic if the XFD_ERR value generated in guest is consumed/clobbered by the host before the guest itself doing so. Intercept #NM exception to save the guest XFD_ERR value when write IA32_XFD with a non-zero value for 1st time. There is at most one interception per guest task given a dynamic feature. RDMSR/WRMSR emulation uses the saved value. The host value (always ZERO outside of the host #NM handler) is restored before enabling preemption. The saved guest value is restored right before entering the guest (with preemption disabled). - Get/set dynamic xfeature state for migration Introduce new capability (KVM_CAP_XSAVE2) to deal with >4KB fpstate buffer. Reading this capability returns the size of the current guest fpstate (e.g. after expansion). Userspace VMM uses a new ioctl (KVM_GET_XSAVE2) to read guest fpstate from the kernel and reuses the existing ioctl (KVM_SET_XSAVE) to update guest fpsate to the kernel. KVM_SET_XSAVE is extended to do properly_sized memdup_user() based on the guest fpstate. - Expose related cpuid bits to guest The last step is to allow exposing XFD, AMX_TILE, AMX_INT8 and AMX_BF16 in guest cpuid. Adding those bits into kvm_cpu_caps finally activates all previous logics in this series - Optimization: disable interception for IA32_XFD IA32_XFD can be frequently updated by the guest, as it is part of the task state and swapped in context switch when prev and next have different XFD setting. Always intercepting WRMSR can easily cause non-negligible overhead. Disable r/w emulation for IA32_XFD after intercepting the first WRMSR(IA32_XFD) with a non-zero value. However MSR passthrough implies the software state (guest_fpstate::xfd and per-cpu xfd cache) might be out of sync with MSR. This suggests KVM needs to re-sync them at VM-exit before preemption is enabled. Thanks Jun Nakajima and Kevin Tian for the design suggestions when this version is being internally worked on. [1] https://lore.kernel.org/all/20211214022825.563892248@linutronix.de/ [2] https://www.spinics.net/lists/kvm/msg259015.html [3] https://lore.kernel.org/lkml/20211208000359.2853257-1-yang.zhong@intel.com/ Thanks, Yang --- Guang Zeng (1): kvm: x86: Add support for getting/setting expanded xstate buffer Jing Liu (11): kvm: x86: Fix xstate_required_size() to follow XSTATE alignment rule kvm: x86: Exclude unpermitted xfeatures at KVM_GET_SUPPORTED_CPUID x86/fpu: Make XFD initialization in __fpstate_reset() a function argument kvm: x86: Check and enable permitted dynamic xfeatures at KVM_SET_CPUID2 kvm: x86: Add emulation for IA32_XFD x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Add CPUID support for Intel AMX Kevin Tian (3): x86/fpu: Provide fpu_update_guest_perm_features() for guest x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Disable interception for IA32_XFD on demand Thomas Gleixner (5): x86/fpu: Extend fpu_xstate_prctl() with guest permissions x86/fpu: Prepare guest FPU for dynamically enabled FPU features x86/fpu: Add guest support to xfd_enable_feature() x86/fpu: Add uabi_size to guest_fpu x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() Wei Wang (1): kvm: selftests: Add support for KVM_CAP_XSAVE2 Documentation/virt/kvm/api.rst | 46 +++++- arch/x86/include/asm/cpufeatures.h | 2 + arch/x86/include/asm/fpu/api.h | 11 ++ arch/x86/include/asm/fpu/types.h | 32 ++++ arch/x86/include/asm/kvm_host.h | 1 + arch/x86/include/uapi/asm/kvm.h | 16 +- arch/x86/include/uapi/asm/prctl.h | 26 ++-- arch/x86/kernel/fpu/core.c | 104 ++++++++++++- arch/x86/kernel/fpu/xstate.c | 147 +++++++++++------- arch/x86/kernel/fpu/xstate.h | 15 +- arch/x86/kernel/process.c | 2 + arch/x86/kvm/cpuid.c | 99 +++++++++--- arch/x86/kvm/vmx/vmcs.h | 5 + arch/x86/kvm/vmx/vmx.c | 45 +++++- arch/x86/kvm/vmx/vmx.h | 2 +- arch/x86/kvm/x86.c | 105 ++++++++++++- include/uapi/linux/kvm.h | 4 + tools/arch/x86/include/uapi/asm/kvm.h | 16 +- tools/include/uapi/linux/kvm.h | 3 + .../testing/selftests/kvm/include/kvm_util.h | 2 + .../selftests/kvm/include/x86_64/processor.h | 10 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 32 ++++ .../selftests/kvm/lib/x86_64/processor.c | 67 +++++++- .../testing/selftests/kvm/x86_64/evmcs_test.c | 2 +- tools/testing/selftests/kvm/x86_64/smm_test.c | 2 +- .../testing/selftests/kvm/x86_64/state_test.c | 2 +- .../kvm/x86_64/vmx_preemption_timer_test.c | 2 +- 27 files changed, 691 insertions(+), 109 deletions(-)

3 years

4
37
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror