- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2 1/2] selftests: net: remove meaningless help option

by Li Zhijian

$ ./fcnal-test.sh -t help Test names: help Looks it intent to list the available tests but it didn't do the right thing. I will add another option the do that in the later patch. Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> --- tools/testing/selftests/net/fcnal-test.sh | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 7f5b265fcb90..5cb59947eed2 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -4068,8 +4068,6 @@ do # setup namespaces and config, but do not run any tests setup) setup; exit 0;; vrf_setup) setup "yes"; exit 0;; - - help) echo "Test names: $TESTS"; exit 0;; esac done -- 2.33.0

3 years

3
4
0 0

Good News Finally.

by Marcus Galois

Hello friend. You might find it so difficult to remember me, though it is indeed a very long time, I am much delighted to contact you again after a long period of time, I remember you despite circumstances that made things not worked out as we projected then. I want to inform you that the transaction we're doing together then finally worked out and I decided to contact you and to let you know because of your tremendous effort to make things work out then. Meanwhile I must inform you that I'm presently in Caribbean Island for numerous business negotiation with some partners. with my sincere heart i have decided to compensate you with USD$900,000 for your dedication then on our transaction, you tried so much that period and I appreciated your effort. I wrote a cheque/check on your name, as soon as you receive it, you let me know. Contact my secretary now on his email: mchristophdaniel(a)gmail.com Name: Mr. Christoph Daniel You are to forward to him your Name........ Address.......,Phone number......for shipment/dispatch of the cheque/Check to you Regards, Mr. Marcus Galois

3 years

1
0
0 0

[PATCH] kselftests/net: adapt the timeout to the largest runtime

by Li Zhijian

timeout in settings is used by each case under the same directory, so it should adapt to the maximum runtime. A normally running net/fib_nexthops.sh may be killed by this unsuitable timeout. Furthermore, since the defect[1] of kselftests framework, net/fib_nexthops.sh which might take at least (300 * 4) seconds would block the whole kselftests framework previously. $ git grep -w 'sleep 300' tools/testing/selftests/net tools/testing/selftests/net/fib_nexthops.sh: sleep 300 tools/testing/selftests/net/fib_nexthops.sh: sleep 300 tools/testing/selftests/net/fib_nexthops.sh: sleep 300 tools/testing/selftests/net/fib_nexthops.sh: sleep 300 Enlarge the timeout by plus 300 based on the obvious largest runtime to avoid the blocking. [1]: https://www.spinics.net/lists/kernel/msg4185370.html Signed-off-by: Zhou Jie <zhoujie2011(a)fujitsu.com> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- tools/testing/selftests/net/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/settings b/tools/testing/selftests/net/settings index 694d70710ff0..dfc27cdc6c05 100644 --- a/tools/testing/selftests/net/settings +++ b/tools/testing/selftests/net/settings @@ -1 +1 @@ -timeout=300 +timeout=1500 -- 2.33.0

3 years

2
1
0 0

[PATCH v2] ksefltest: pidfd: Fix wait_states: Test terminated by timeout

by Li Zhijian

0Day/LKP observed that the kselftest blocks foever since one of the pidfd_wait doesn't terminate in 1 of 30 runs. After digging into the source, we found that it blocks at: ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0); we can reproduce it by: $ while true; do make run_tests -C pidfd; done Introduce a blocking read in child process to make sure the parent can check its WCONTINUED. CC: Philip Li <philip.li(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> --- V2: rewrite with pipe to avoid usleep --- tools/testing/selftests/pidfd/pidfd_wait.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index be2943f072f6..d5c0ffa26c32 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -96,21 +96,26 @@ TEST(wait_states) .flags = CLONE_PIDFD | CLONE_PARENT_SETTID, .exit_signal = SIGCHLD, }; - int ret; + int ret, pfd[2]; pid_t pid; siginfo_t info = { .si_signo = 0, }; - + ASSERT_EQ(pipe(pfd), 0); pid = sys_clone3(&args); ASSERT_GE(pid, 0); if (pid == 0) { + char buf[2]; + close(pfd[1]); kill(getpid(), SIGSTOP); + ASSERT_EQ(read(pfd[0], buf, 1), 1); + close(pfd[0]); kill(getpid(), SIGSTOP); exit(EXIT_SUCCESS); } + close(pfd[0]); ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WSTOPPED, NULL), 0); ASSERT_EQ(info.si_signo, SIGCHLD); ASSERT_EQ(info.si_code, CLD_STOPPED); @@ -119,6 +124,8 @@ TEST(wait_states) ASSERT_EQ(sys_pidfd_send_signal(pidfd, SIGCONT, NULL, 0), 0); ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0); + ASSERT_EQ(write(pfd[1], "C", 1), 1); + close(pfd[1]); ASSERT_EQ(info.si_signo, SIGCHLD); ASSERT_EQ(info.si_code, CLD_CONTINUED); ASSERT_EQ(info.si_pid, parent_tid); -- 2.33.0

3 years

2
1
0 0

[PATCH v9 0/7] cgroup/cpuset: Add new cpuset partition type & empty effecitve cpus

by Waiman Long

v9: - Add a new patch 1 to remove the child cpuset restriction on parent's "cpuset.cpus". - Relax initial root partition entry limitation to allow cpuset.cpus to overlap that of parent's. - An "isolated invalid" displayed type is added to cpuset.cpus.partition. - Resetting partition root to "member" will leave child partition root as invalid. - Update documentation and test accordingly. v8: - Reorganize the patch series and rationalize the features and constraints of a partition. - Update patch descriptions and documentation accordingly. v7: - Simplify the documentation patch (patch 5) as suggested by Tejun. - Fix a typo in patch 2 and improper commit log in patch 3. This patchset includes one bug fix and four enhancements to the cpuset v2 code. Patch 1: Allow parent to set "cpuset.cpus" that may not be a superset of children's "cpuset.cpus" for default hierarchy. Patch 2: Enable partition with no task to have empty cpuset.cpus.effective. Patch 3: Refining the features and constraints of a cpuset partition clarifying what changes are allowed. Patch 4: Add a new partition state "isolated" to create a partition root without load balancing. This is for handling intermitten workloads that have a strict low latency requirement. Patch 5: Enable the "cpuset.cpus.partition" file to show the reason that causes invalid partition like "root invalid (No cpu available due to hotplug)". Patch 6 updates the cgroup-v2.rst file accordingly. Patch 7 adds a new cpuset test to test the new cpuset partition code. Waiman Long (7): cgroup/cpuset: Don't let child cpusets restrict parent in default hierarchy cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective cgroup/cpuset: Refining features and constraints of a partition cgroup/cpuset: Add a new isolated cpus.partition type cgroup/cpuset: Show invalid partition reason string cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst kselftest/cgroup: Add cpuset v2 partition root state test Documentation/admin-guide/cgroup-v2.rst | 168 +++-- kernel/cgroup/cpuset.c | 440 +++++++----- tools/testing/selftests/cgroup/Makefile | 5 +- .../selftests/cgroup/test_cpuset_prs.sh | 667 ++++++++++++++++++ tools/testing/selftests/cgroup/wait_inotify.c | 87 +++ 5 files changed, 1142 insertions(+), 225 deletions(-) create mode 100755 tools/testing/selftests/cgroup/test_cpuset_prs.sh create mode 100644 tools/testing/selftests/cgroup/wait_inotify.c -- 2.27.0

3 years

4
29
0 0

[PATCH] selftests: rtc: Increase test timeout so that all tests run

by Nícolas F. R. A. Prado

The timeout setting for the rtc kselftest is currently 90 seconds. However, two of the tests set alarms, which take one minute to complete each. So the timeout should be at least 120. Set it to 180, so that all tests are able to complete and still have some slack. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- This issue was discovered as part of adding the rtc kselftest to run on KernelCI for the rk3399-gru-kevin device, which uses rtc-cros-ec as the RTC driver. The output log with the current timeout is shown in [1]. As can be seen, the whole test times out before the alarm_wkalm_set_minute test has had a chance to complete: # # RUN rtc.alarm_wkalm_set_minute ... # # rtctest.c:294:alarm_wkalm_set_minute:Alarm time now set to 11/01/2022 23:03:00. # not ok 1 selftests: rtc: rtctest # TIMEOUT 90 seconds With the increased timeout, as shown in [2], the alarm_wkalm_set_minute test does complete its run: # # RUN rtc.alarm_wkalm_set_minute ... # # rtctest.c:294:alarm_wkalm_set_minute:Alarm time now set to 12/01/2022 15:54:00. # # OK rtc.alarm_wkalm_set_minute # ok 7 rtc.alarm_wkalm_set_minute # # FAILED: 6 / 7 tests passed. The fact that the alarm_alm_set_minute test times out on its own is probably an issue with the rtc-cros-ec driver. Still, since the tests are independent, all of them should be able to run regardless of how long each one takes (so, assuming the worst case scenario). [1] https://lava.collabora.co.uk/scheduler/job/5409783 [2] https://lava.collabora.co.uk/scheduler/job/5415176 tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6..a953c96aa16e 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

3 years

2
2
0 0

[PATCH v2 0/6] kunit: refactor assertions to use less stack

by Daniel Latypov

Every KUNIT_ASSERT/EXPECT() invocation puts a `kunit_assert` object onto the stack. The most common one is `kunit_binary_assert` which is 88 bytes on UML. So in the cases where the compiler doesn't optimize this away, we can very quickly blow up the stack size. This series implements Linus' suggestion in [1]. Namely, we split out the file, line number, and assert_type (EXPECT/ASSERT) out of kunit_assert. We can also drop the entirely unused `struct kunit *test` field, saving a bit more space as well. All together, sizeof(struct kunit_assert) went from 48 to 24 on UML. Note: the other assert types are bigger, see [2]. This series also adds in an example test that uses all the base KUNIT_EXPECT macros to both advertise their existence to new users and serve as a smoketest for all these changes here. [1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ [2] e.g. consider the most commonly used assert (also the biggest) struct kunit_binary_assert { struct kunit_assert assert; const char *operation; const char *left_text; long long left_value; const char *right_text; long long right_value; }; So sizeof(struct kunit_binary_assert) = went from 88 to 64. I.e. only a 27% reduction instead of 50% in the most common case. All 3 of the `const char*` could be split out into a `static` var as well, but that's a bit trickier to do with how all the macros are written. === Changelog === v1 -> v2: * made the new example test more focused on documenting the macros rather than using them all as a smoketest * s/kunit_failed_assertion()/kunit_do_failed_assertion() * added `unlikely()` to `if(!(pass))` check in KUNIT_ASSERTION() Daniel Latypov (6): kunit: add example test case showing off all the expect macros kunit: move check if assertion passed into the macros kunit: drop unused kunit* field in kunit_assert kunit: factor out kunit_base_assert_format() call into kunit_fail() kunit: split out part of kunit_assert into a static const kunit: drop unused assert_type from kunit_assert and clean up macros include/kunit/assert.h | 88 +++++++++++----------------------- include/kunit/test.h | 53 ++++++++++---------- lib/kunit/assert.c | 15 ++---- lib/kunit/kunit-example-test.c | 42 ++++++++++++++++ lib/kunit/test.c | 27 +++++------ 5 files changed, 117 insertions(+), 108 deletions(-) base-commit: ad659ccb5412874c6a89d3588cb18857c00e9d0f -- 2.34.1.575.g55b058a8bb-goog

3 years

3
13
0 0

[PATCH 0/6] kunit: refactor assertions to use less stack

by Daniel Latypov

Every KUNIT_ASSERT/EXPECT() invocation puts a `kunit_assert` object onto the stack. The most common one is `kunit_binary_assert` which is 88 bytes on UML. So in the cases where the compiler doesn't optimize this away, we can very quickly blow up the stack size. This series implements Linus' suggestion in [1]. Namely, we split out the file, line number, and assert_type (EXPECT/ASSERT) out of kunit_assert. We can also drop the entirely unused `struct kunit *test` field, saving a bit more space as well. All together, sizeof(struct kunit_assert) went from 48 to 24 on UML. Note: the other assert types are bigger, see [2]. This series also adds in an example test that uses all the KUNIT_EXPECT macros to both advertise their existence to new users and serve as a smoketest for all these changes here. [1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ [2] e.g. consider the most commonly used assert (also the biggest) struct kunit_binary_assert { struct kunit_assert assert; const char *operation; const char *left_text; long long left_value; const char *right_text; long long right_value; }; So sizeof(struct kunit_binary_assert) = went from 88 to 64. I.e. only a 27% reduction instead of 50% in the most common case. All 3 of the `const char*` could be split out into a `static` var as well, but that's a bit trickier to do with how all the macros are written. Daniel Latypov (6): kunit: add example test case showing off all the expect macros kunit: move check if assertion passed into the macros kunit: drop unused kunit* field in kunit_assert kunit: factor out kunit_base_assert_format() call into kunit_fail() kunit: split out part of kunit_assert into a static const kunit: drop unused assert_type from kunit_assert and clean up macros include/kunit/assert.h | 88 +++++++++++----------------------- include/kunit/test.h | 52 ++++++++++---------- lib/kunit/assert.c | 15 ++---- lib/kunit/kunit-example-test.c | 46 ++++++++++++++++++ lib/kunit/test.c | 27 +++++------ 5 files changed, 120 insertions(+), 108 deletions(-) base-commit: ad659ccb5412874c6a89d3588cb18857c00e9d0f -- 2.34.1.575.g55b058a8bb-goog

3 years

3
24
0 0

[PATCH 1/2] selftests/lkdtm: Remove dead config option

by Muhammad Usama Anjum

CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in commit 53944f171a89 ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it from the lkdtm selftest config. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/lkdtm/config | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/lkdtm/config b/tools/testing/selftests/lkdtm/config index a26a3fa9e925..a7a58f885f52 100644 --- a/tools/testing/selftests/lkdtm/config +++ b/tools/testing/selftests/lkdtm/config @@ -3,7 +3,6 @@ CONFIG_DEBUG_LIST=y CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_FORTIFY_SOURCE=y CONFIG_HARDENED_USERCOPY=y -# CONFIG_HARDENED_USERCOPY_FALLBACK is not set CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y CONFIG_UBSAN_BOUNDS=y -- 2.30.2

3 years

1
1
0 0

Wycena paneli fotowoltaicznych

by Jakub Daroch

Dzień dobry, dostrzegam możliwość współpracy z Państwa firmą. Świadczymy kompleksową obsługę inwestycji w fotowoltaikę, która obniża koszty energii elektrycznej nawet o 90%. Czy są Państwo zainteresowani weryfikacją wstępnych propozycji? Pozdrawiam, Jakub Daroch

3 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror