For this patchset, test cases of the qdisc modules are added to the
tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm
ok 1 7628 - Create ATM with default setting
ok 2 390a - Delete ATM with valid handle
ok 3 32a0 - Show ATM class
ok 4 6310 - Dump ATM stats
./tdc.py -c choke
ok 1 8937 - Create CHOKE with default setting
ok 2 48c0 - Create CHOKE with min packet setting
ok 3 38c1 - Create CHOKE with max packet setting
ok 4 234a - Create CHOKE with ecn setting
ok 5 4380 - Create CHOKE with burst setting
ok 6 48c7 - Delete CHOKE with valid handle
ok 7 4398 - Replace CHOKE with min setting
ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel
ok 1 983a - Create CODEL with default setting
ok 2 38aa - Create CODEL with limit packet setting
ok 3 9178 - Create CODEL with target setting
ok 4 78d1 - Create CODEL with interval setting
ok 5 238a - Create CODEL with ecn setting
ok 6 939c - Create CODEL with ce_threshold setting
ok 7 8380 - Delete CODEL with valid handle
ok 8 289c - Replace CODEL with limit setting
ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf
ok 1 34ba - Create ETF with default setting
ok 2 438f - Create ETF with delta nanos setting
ok 3 9041 - Create ETF with deadline_mode setting
ok 4 9a0c - Create ETF with skip_sock_check setting
ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq
ok 1 983b - Create FQ with default setting
ok 2 38a1 - Create FQ with limit packet setting
ok 3 0a18 - Create FQ with flow_limit setting
ok 4 2390 - Create FQ with quantum setting
ok 5 845b - Create FQ with initial_quantum setting
ok 6 9398 - Create FQ with maxrate setting
ok 7 342c - Create FQ with nopacing setting
ok 8 6391 - Create FQ with refill_delay setting
ok 9 238b - Create FQ with low_rate_threshold setting
ok 10 7582 - Create FQ with orphan_mask setting
ok 11 4894 - Create FQ with timer_slack setting
ok 12 324c - Create FQ with ce_threshold setting
ok 13 424a - Create FQ with horizon time setting
ok 14 89e1 - Create FQ with horizon_cap setting
ok 15 32e1 - Delete FQ with valid handle
ok 16 49b0 - Replace FQ with limit setting
ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred
ok 1 8942 - Create GRED with default setting
ok 2 5783 - Create GRED with grio setting
ok 3 8a09 - Create GRED with limit setting
ok 4 48cb - Create GRED with ecn setting
ok 5 763a - Change GRED setting
ok 6 8309 - Show GRED class
./tdc.py -c hhf
ok 1 4812 - Create HHF with default setting
ok 2 8a92 - Create HHF with limit setting
ok 3 3491 - Create HHF with quantum setting
ok 4 ba04 - Create HHF with reset_timeout setting
ok 5 4238 - Create HHF with admit_bytes setting
ok 6 839f - Create HHF with evict_timeout setting
ok 7 a044 - Create HHF with non_hh_weight setting
ok 8 32f9 - Change HHF with limit setting
ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast
ok 1 900c - Create pfifo_fast with default setting
ok 2 7470 - Dump pfifo_fast stats
ok 3 b974 - Replace pfifo_fast with different handle
ok 4 3240 - Delete pfifo_fast with valid handle
ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug
ok 1 3289 - Create PLUG with default setting
ok 2 0917 - Create PLUG with block setting
ok 3 483b - Create PLUG with release setting
ok 4 4995 - Create PLUG with release_indefinite setting
ok 5 389c - Create PLUG with limit setting
ok 6 384a - Delete PLUG with valid handle
ok 7 439a - Replace PLUG with limit setting
ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb
ok 1 3294 - Create SFB with default setting
ok 2 430a - Create SFB with rehash setting
ok 3 3410 - Create SFB with db setting
ok 4 49a0 - Create SFB with limit setting
ok 5 1241 - Create SFB with max setting
ok 6 3249 - Create SFB with target setting
ok 7 30a9 - Create SFB with increment setting
ok 8 239a - Create SFB with decrement setting
ok 9 9301 - Create SFB with penalty_rate setting
ok 10 2a01 - Create SFB with penalty_burst setting
ok 11 3209 - Change SFB with rehash setting
ok 12 5447 - Show SFB class
./tdc.py -c sfq
ok 1 7482 - Create SFQ with default setting
ok 2 c186 - Create SFQ with limit setting
ok 3 ae23 - Create SFQ with perturb setting
ok 4 a430 - Create SFQ with quantum setting
ok 5 4539 - Create SFQ with divisor setting
ok 6 b089 - Create SFQ with flows setting
ok 7 99a0 - Create SFQ with depth setting
ok 8 7389 - Create SFQ with headdrop setting
ok 9 6472 - Create SFQ with redflowlimit setting
ok 10 8929 - Show SFQ class
./tdc.py -c skbprio
ok 1 283e - Create skbprio with default setting
ok 2 c086 - Create skbprio with limit setting
ok 3 6733 - Change skbprio with limit setting
ok 4 2958 - Show skbprio class
./tdc.py -c taprio
ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
ok 2 9462 - Add taprio Qdisc with multiple sched-entry
ok 3 8d92 - Add taprio Qdisc with txtime-delay
ok 4 d092 - Delete taprio Qdisc with valid handle
ok 5 8471 - Show taprio class
ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf
ok 1 6430 - Create TBF with default setting
ok 2 0518 - Create TBF with mtu setting
ok 3 320a - Create TBF with peakrate setting
ok 4 239b - Create TBF with latency setting
ok 5 c975 - Create TBF with overhead setting
ok 6 948c - Create TBF with linklayer setting
ok 7 3549 - Replace TBF with mtu
ok 8 f948 - Change TBF with latency time
ok 9 2348 - Show TBF class
./tdc.py -c teql
ok 1 84a0 - Create TEQL with default setting
ok 2 7734 - Create TEQL with multiple device
ok 3 34a9 - Delete TEQL with valid handle
ok 4 6289 - Show TEQL stats
---
v2: modify subject prefix
---
Zhengchao Shao (15):
selftests/tc-testing: add selftests for atm qdisc
selftests/tc-testing: add selftests for choke qdisc
selftests/tc-testing: add selftests for codel qdisc
selftests/tc-testing: add selftests for etf qdisc
selftests/tc-testing: add selftests for fq qdisc
selftests/tc-testing: add selftests for gred qdisc
selftests/tc-testing: add selftests for hhf qdisc
selftests/tc-testing: add selftests for pfifo_fast qdisc
selftests/tc-testing: add selftests for plug qdisc
selftests/tc-testing: add selftests for sfb qdisc
selftests/tc-testing: add selftests for sfq qdisc
selftests/tc-testing: add selftests for skbprio qdisc
selftests/tc-testing: add selftests for taprio qdisc
selftests/tc-testing: add selftests for tbf qdisc
selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++
.../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++
.../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++
.../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++
.../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++
.../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++
.../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++
.../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++
.../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++
.../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++
.../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++
.../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++
.../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++
.../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++
.../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++
15 files changed, 2735 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
--
2.17.1
Hi Linus,
This change fixes out-of-tree builds for Landlock tests, which was
initially identified here:
https://lore.kernel.org/r/CADYN=9JM1nnjC9LypHqrz7JJjbZLpm8rArDUy4zgYYrajErB…
Please pull this Landlock fix for v6.0-rc7 . This change merged
cleanly with your tree, and have been successfully tested in the latest
linux-next releases for a week.
Regards,
Mickaël
--
The following changes since commit 80e78fcce86de0288793a0ef0f6acf37656ee4cf:
Linux 6.0-rc5 (2022-09-11 16:22:01 -0400)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux.git tags/landlock-6.0-rc7
for you to fetch changes up to a52540522c9541bfa3e499d2edba7bc0ca73a4ca:
selftests/landlock: Fix out-of-tree builds (2022-09-14 16:37:38 +0200)
----------------------------------------------------------------
Landlock fix for v6.0-rc7
----------------------------------------------------------------
Mickaël Salaün (1):
selftests/landlock: Fix out-of-tree builds
tools/testing/selftests/landlock/Makefile | 19 ++++++++++---------
tools/testing/selftests/lib.mk | 4 ++++
2 files changed, 14 insertions(+), 9 deletions(-)
It looks like this test has been accidentally dropped when resolving
conflicts in this Makefile.
Most probably because there were 3 different patches modifying this file
in parallel:
commit 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
commit bbb774d921e2 ("net: Add tests for bonding and team address list management")
commit 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
The first one was applied in 'net-next' while the two other ones were
recently applied in the 'net' tree.
But that's alright, easy to fix by re-adding the missing one!
Fixes: 0140a7168f8b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net>
---
tools/testing/selftests/drivers/net/bonding/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
index d14846fcf3d1..e9dab5f9d773 100644
--- a/tools/testing/selftests/drivers/net/bonding/Makefile
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -4,6 +4,7 @@
TEST_PROGS := \
bond-arp-interval-causes-panic.sh \
bond-break-lacpdu-tx.sh \
+ bond-lladdr-target.sh \
dev_addr_lists.sh
TEST_FILES := lag_lib.sh
base-commit: d05d9eb79d0cd0f7a978621b4a56a1f2db444f86
--
2.37.2
The livepatch kselftests rely on comparing expected and actual output
from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1]
changed sysctl's output to emit key pathnames like:
sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy
versus previous dotted output:
sysctl: setting key "kernel.ftrace_enabled": Device or resource busy
The modification in output was later reverted [2], but since the change
has been tagged in procps-ng v4.0.0, update the livepatch kselftest to
handle either case.
[1] https://gitlab.com/procps-ng/procps/-/commit/6389deca5bf667f5fab5912acde78b…
[2] https://gitlab.com/procps-ng/procps/-/commit/b159c198c9160a8eb13254e2b631d0…
Reported-by: Dennis(Zhuoheng) Li <denli(a)redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence(a)redhat.com>
---
tools/testing/selftests/livepatch/functions.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh
index 9230b869371d..d5001c9eb72e 100644
--- a/tools/testing/selftests/livepatch/functions.sh
+++ b/tools/testing/selftests/livepatch/functions.sh
@@ -86,7 +86,7 @@ function set_ftrace_enabled() {
if [[ "$result" != "$1" ]] ; then
if [[ $can_fail -eq 1 ]] ; then
- echo "livepatch: $err" > /dev/kmsg
+ echo "livepatch: $err" | sed 's#/proc/sys/kernel/#kernel.#' > /dev/kmsg
return
fi
--
2.26.3
Dzień dobry,
kontaktuję się z Państwem, ponieważ chciałbym zaproponować wygodne rozwiązanie, które umożliwi Państwa firmie stabilny rozwój.
Konkurencyjne otoczenie wymaga ciągłego ulepszania i poszerzenia oferty, co z kolei wiąże się z koniecznością inwestowania. Brak odpowiedniego kapitału poważnie ogranicza tempo rozwoju firmy.
Od wielu lat z powodzeniem pomagam firmom w uzyskaniu najlepszej formy finansowania z banku oraz UE. Mam stałych Klientów, którzy nadal chętnie korzystają z moich usług, a także polecają je innym.
Czy chcieliby Państwo skorzystać z pomocy wykwalifikowanego i doświadczonego doradcy finansowego?
Pozdrawiam
Jakub Olejniczak