- Linux-kselftest-mirror - lists.linaro.org

[PATCH AUTOSEL 5.16 13/42] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 12/42] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 11/42] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 09/42] selftests: netfilter: check stateless nat udp checksum fixup

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa ] Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/nft_nat.sh | 152 +++++++++++++++++++ 1 file changed, 152 insertions(+) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index d88867d2fed75..eb8543b9a5c40 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -898,6 +898,144 @@ EOF ip netns exec "$ns0" nft delete table $family nat } +test_stateless_nat_ip() +{ + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules" + return 1 + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table ip stateless { + map xlate_in { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2, + } + } + map xlate_out { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99 + } + } + + chain prerouting { + type filter hook prerouting priority -400; policy accept; + ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in + ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ip statless rules" + return $ksft_skip + fi + + reset_counters + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules" + lret=1 + fi + + # ns1 should have seen packets from .2.2, due to stateless rewrite. + expect="packets 1 bytes 84" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 1" + lret=1 + fi + + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3" + lret=1 + fi + + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4" + lret=1 + fi + done + + reset_counters + + socat -h > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run stateless nat frag test without socat tool" + if [ $lret -eq 0 ]; then + return $ksft_skip + fi + + ip netns exec "$ns0" nft delete table ip stateless + return $lret + fi + + local tmpfile=$(mktemp) + dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null + + local outfile=$(mktemp) + ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null & + sc_r=$! + + sleep 1 + # re-do with large ping -> ip fragmentation + ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null + if [ $? -ne 0 ] ; then + echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2 + lret=1 + fi + + wait + + cmp "$tmpfile" "$outfile" + if [ $? -ne 0 ]; then + ls -l "$tmpfile" "$outfile" + echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2 + lret=1 + fi + + rm -f "$tmpfile" "$outfile" + + # ns1 should have seen packets from 2.2, due to stateless rewrite. + expect="packets 3 bytes 4164" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 5" + lret=1 + fi + + ip netns exec "$ns0" nft delete table ip stateless + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete table ip stateless" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP statless for $ns2" + + return $lret +} + # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 for i in 0 1 2; do ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF @@ -964,6 +1102,19 @@ table inet filter { EOF done +# special case for stateless nat check, counter needs to +# be done before (input) ip defragmentation +ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF +table inet filter { + counter ns0insl {} + + chain pre { + type filter hook prerouting priority -400; policy accept; + ip saddr 10.0.2.2 counter name "ns0insl" + } +} +EOF + sleep 3 # test basic connectivity for i in 1 2; do @@ -1018,6 +1169,7 @@ $test_inet_nat && test_redirect inet $test_inet_nat && test_redirect6 inet test_port_shadowing +test_stateless_nat_ip if [ $ret -ne 0 ];then echo -n "FAIL: " -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 08/42] selftests: netfilter: reduce zone stress test running time

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit c858620d2ae3489409af593f005a48a8a324da3d ] This selftests needs almost 3 minutes to complete, reduce the insertes zones to 1000. Test now completes in about 20 seconds. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/nft_zones_many.sh | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh index 04633119b29a0..5a8db0b48928f 100755 --- a/tools/testing/selftests/netfilter/nft_zones_many.sh +++ b/tools/testing/selftests/netfilter/nft_zones_many.sh @@ -9,7 +9,7 @@ ns="ns-$sfx" # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 -zones=20000 +zones=2000 have_ct_tool=0 ret=0 @@ -75,10 +75,10 @@ EOF while [ $i -lt $max_zones ]; do local start=$(date +%s%3N) - i=$((i + 10000)) + i=$((i + 1000)) j=$((j + 1)) # nft rule in output places each packet in a different zone. - dd if=/dev/zero of=/dev/stdout bs=8k count=10000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345 + dd if=/dev/zero of=/dev/stdout bs=8k count=1000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345 if [ $? -ne 0 ] ;then ret=1 break @@ -86,7 +86,7 @@ EOF stop=$(date +%s%3N) local duration=$((stop-start)) - echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)" + echo "PASS: added 1000 entries in $duration ms (now $i total, loop $j)" done if [ $have_ct_tool -eq 1 ]; then @@ -128,11 +128,11 @@ test_conntrack_tool() { break fi - if [ $((i%10000)) -eq 0 ];then + if [ $((i%1000)) -eq 0 ];then stop=$(date +%s%3N) local duration=$((stop-start)) - echo "PASS: added 10000 entries in $duration ms (now $i total)" + echo "PASS: added 1000 entries in $duration ms (now $i total)" start=$stop fi done -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 07/42] kselftest: signal all child processes

by Sasha Levin

From: Li Zhijian <lizhijian(a)cn.fujitsu.com> [ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ] We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. Here we group all its child processes so that kill() can signal all of them in timeout. Fixed change log: Shuah Khan <skhan(a)linuxfoundation.org> Suggested-by: yang xu <xuyang2018.jy(a)cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> Acked-by: Christian Brauner <christian.brauner(a)ubuntu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kselftest_harness.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 79a182cfa43ad..78e59620d28de 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -875,7 +875,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext) } t->timed_out = true; - kill(t->pid, SIGKILL); + // signal process group + kill(-(t->pid), SIGKILL); } void __wait_for_test(struct __test_metadata *t) @@ -985,6 +986,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg("ERROR SPAWNING TEST CHILD\n"); t->passed = 0; } else if (t->pid == 0) { + setpgrp(); t->fn(t, variant); if (t->skip) _exit(255); -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 06/42] selftests: rtc: Increase test timeout so that all tests run

by Sasha Levin

From: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6b..a953c96aa16e1 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.16 05/42] kunit: tool: Import missing importlib.abc

by Sasha Levin

From: Michał Winiarski <michal.winiarski(a)intel.com> [ Upstream commit 235528072f28b3b0a1446279b7eaddda36dbf743 ] Python 3.10.0 contains: 9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)") It causes importlib.util to no longer import importlib.abs, which leads to the following error when trying to use kunit with qemu: AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'? Add the missing import. Signed-off-by: Michał Winiarski <michal.winiarski(a)intel.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/kunit/kunit_kernel.py | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 66095568bf327..fae843bf2f0eb 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -6,6 +6,7 @@ # Author: Felix Guo <felixguoxiuping(a)gmail.com> # Author: Brendan Higgins <brendanhiggins(a)google.com> +import importlib.abc import importlib.util import logging import subprocess -- 2.34.1

2 years, 11 months

1
0
0 0

[PATCH v3 1/3] list: test: Add test for list_del_init_careful()

by David Gow

The list_del_init_careful() function was added[1] after the list KUnit test. Add a very basic test to cover it. Note that this test only covers the single-threaded behaviour (which matches list_del_init()), as is already the case with the test for list_empty_careful(). [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Signed-off-by: David Gow <davidgow(a)google.com> --- Changes since v2: https://lore.kernel.org/linux-kselftest/20220208040122.695258-1-davidgow@go… - Fix the test calling list_del_init() instead of list_del_init_careful() - Improve the comment noting we only test single-threaded behaviour. Changes since v1: https://lore.kernel.org/linux-kselftest/20220205061539.273330-1-davidgow@go… - Patch 1/3 unchanged --- lib/list-test.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/lib/list-test.c b/lib/list-test.c index ee09505df16f..f82a3c7788b8 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -161,6 +161,25 @@ static void list_test_list_del_init(struct kunit *test) KUNIT_EXPECT_TRUE(test, list_empty_careful(&a)); } +static void list_test_list_del_init_careful(struct kunit *test) +{ + /* NOTE: This test only checks the behaviour of this function in + * isolation. It does not verify memory model guarantees. */ + struct list_head a, b; + LIST_HEAD(list); + + list_add_tail(&a, &list); + list_add_tail(&b, &list); + + /* before: [list] -> a -> b */ + list_del_init_careful(&a); + /* after: [list] -> b, a initialised */ + + KUNIT_EXPECT_PTR_EQ(test, list.next, &b); + KUNIT_EXPECT_PTR_EQ(test, b.prev, &list); + KUNIT_EXPECT_TRUE(test, list_empty_careful(&a)); +} + static void list_test_list_move(struct kunit *test) { struct list_head a, b; @@ -707,6 +726,7 @@ static struct kunit_case list_test_cases[] = { KUNIT_CASE(list_test_list_replace_init), KUNIT_CASE(list_test_list_swap), KUNIT_CASE(list_test_list_del_init), + KUNIT_CASE(list_test_list_del_init_careful), KUNIT_CASE(list_test_list_move), KUNIT_CASE(list_test_list_move_tail), KUNIT_CASE(list_test_list_bulk_move_tail), -- 2.35.0.263.gb82422642f-goog

2 years, 11 months

2
3
0 0

[PATCH V3 0/4] selftests/sgx: Early enclave loading error path fixes

by Reinette Chatre

Changes since V2: - V2: https://lore.kernel.org/linux-sgx/cover.1643754040.git.reinette.chatre@inte… - Added Acked-by from Shuah to all patches in series. - Shuah is ok with these entering the kernel via tip.git: https://lore.kernel.org/linux-sgx/e188c62e-f75e-2bec-b544-76063098611d@linu… - Include x86(a)kernel.org and more x86 maintainers since goal is for inclusion into tip.git. Changes since V1: - V1: https://lore.kernel.org/linux-sgx/cover.1643393473.git.reinette.chatre@inte… - All changes impact the commit messages only, no changes to code. - Rewrite commit message of 1/4 (Dave). - Detail in 2/4 commit log what callers will see with this change (Dave). - Add Acked-by from Dave to 2/4 and 4/4. Hi Everybody, Please find included a few fixes that address problems encountered after venturing into the enclave loading error handling code of the SGX selftests. Reinette Reinette Chatre (4): selftests/sgx: Fix NULL-pointer-dereference upon early test failure selftests/sgx: Do not attempt enclave build without valid enclave selftests/sgx: Ensure enclave data available during debug print selftests/sgx: Remove extra newlines in test output tools/testing/selftests/sgx/load.c | 9 +++++---- tools/testing/selftests/sgx/main.c | 9 +++++---- 2 files changed, 10 insertions(+), 8 deletions(-) -- 2.25.1

2 years, 12 months

1
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror