- Linux-kselftest-mirror - lists.linaro.org

by Chen Linxuan

When writing a test for fusectl, I referred to this Makefile as a reference for creating a FUSE daemon in the selftests. While doing so, I noticed that there is a minor issue in the Makefile. The fuse_mnt.c file is not actually compiled into fuse_mnt.o, and the code setting CFLAGS for it never takes effect. The reason fuse_mnt compiles successfully is because CFLAGS is set at the very beginning of the file. Signed-off-by: Chen Linxuan <chenlinxuan(a)uniontech.com> --- tools/testing/selftests/memfd/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile index 163b6f68631c4..e9b886c65153d 100644 --- a/tools/testing/selftests/memfd/Makefile +++ b/tools/testing/selftests/memfd/Makefile @@ -1,5 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -CFLAGS += -D_FILE_OFFSET_BITS=64 CFLAGS += $(KHDR_INCLUDES) TEST_GEN_PROGS := memfd_test @@ -16,10 +15,9 @@ ifeq ($(VAR_LDLIBS),) VAR_LDLIBS := -lfuse -pthread endif -fuse_mnt.o: CFLAGS += $(VAR_CFLAGS) - include ../lib.mk +$(OUTPUT)/fuse_mnt: CFLAGS += $(VAR_CFLAGS) $(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS) $(OUTPUT)/memfd_test: memfd_test.c common.c -- 2.43.0

1 month, 2 weeks

1
0
0 0

[PATCH bpf-next v6 0/5] Replace CONFIG_DMABUF_SYSFS_STATS with BPF

by T.J. Mercier

Until CONFIG_DMABUF_SYSFS_STATS was added [1] it was only possible to perform per-buffer accounting with debugfs which is not suitable for production environments. Eventually we discovered the overhead with per-buffer sysfs file creation/removal was significantly impacting allocation and free times, and exacerbated kernfs lock contention. [2] dma_buf_stats_setup() is responsible for 39% of single-page buffer creation duration, or 74% of single-page dma_buf_export() duration when stressing dmabuf allocations and frees. I prototyped a change from per-buffer to per-exporter statistics with a RCU protected list of exporter allocations that accommodates most (but not all) of our use-cases and avoids almost all of the sysfs overhead. While that adds less overhead than per-buffer sysfs, and less even than the maintenance of the dmabuf debugfs_list, it's still *additional* overhead on top of the debugfs_list and doesn't give us per-buffer info. This series uses the existing dmabuf debugfs_list to implement a BPF dmabuf iterator, which adds no overhead to buffer allocation/free and provides per-buffer info. The list has been moved outside of CONFIG_DEBUG_FS scope so that it is always populated. The BPF program loaded by userspace that extracts per-buffer information gets to define its own interface which avoids the lack of ABI stability with debugfs. This will allow us to replace our use of CONFIG_DMABUF_SYSFS_STATS, and the plan is to remove it from the kernel after the next longterm stable release. [1] https://lore.kernel.org/linux-media/20201210044400.1080308-1-hridya@google.… [2] https://lore.kernel.org/all/20220516171315.2400578-1-tjmercier@google.com v1: https://lore.kernel.org/all/20250414225227.3642618-1-tjmercier@google.com v1 -> v2: Make the DMA buffer list independent of CONFIG_DEBUG_FS per Christian König Add CONFIG_DMA_SHARED_BUFFER check to kernel/bpf/Makefile per kernel test robot Use BTF_ID_LIST_SINGLE instead of BTF_ID_LIST_GLOBAL_SINGLE per Song Liu Fixup comment style, mixing code/declarations, and use ASSERT_OK_FD in selftest per Song Liu Add BPF_ITER_RESCHED feature to bpf_dmabuf_reg_info per Alexei Starovoitov Add open-coded iterator and selftest per Alexei Starovoitov Add a second test buffer from the system dmabuf heap to selftests Use the BPF program we'll use in production for selftest per Alexei Starovoitov https://r.android.com/c/platform/system/bpfprogs/+/3616123/2/dmabufIter.c https://r.android.com/c/platform/system/memory/libmeminfo/+/3614259/1/libdm… v2: https://lore.kernel.org/all/20250504224149.1033867-1-tjmercier@google.com v2 -> v3: Rebase onto bpf-next/master Move get_next_dmabuf() into drivers/dma-buf/dma-buf.c, along with the new get_first_dmabuf(). This avoids having to expose the dmabuf list and mutex to the rest of the kernel, and keeps the dmabuf mutex operations near each other in the same file. (Christian König) Add Christian's RB to dma-buf: Rename debugfs symbols Drop RFC: dma-buf: Remove DMA-BUF statistics v3: https://lore.kernel.org/all/20250507001036.2278781-1-tjmercier@google.com v3 -> v4: Fix selftest BPF program comment style (not kdoc) per Alexei Starovoitov Fix dma-buf.c kdoc comment style per Alexei Starovoitov Rename get_first_dmabuf / get_next_dmabuf to dma_buf_iter_begin / dma_buf_iter_next per Christian König Add Christian's RB to bpf: Add dmabuf iterator v4: https://lore.kernel.org/all/20250508182025.2961555-1-tjmercier@google.com v4 -> v5: Add Christian's Acks to all patches Add Song Liu's Acks Move BTF_ID_LIST_SINGLE and DEFINE_BPF_ITER_FUNC closer to usage per Song Liu Fix open-coded iterator comment style per Song Liu Move iterator termination check to its own subtest per Song Liu Rework selftest buffer creation per Song Liu Fix spacing in sanitize_string per BPF CI v5: https://lore.kernel.org/all/20250512174036.266796-1-tjmercier@google.com v5 -> v6: Song Liu: Init test buffer FDs to -1 Zero-init udmabuf_create for future proofing Bail early for iterator fd/FILE creation failure Dereference char ptr to check for NUL in sanitize_string() Move map insertion from create_test_buffers() to test_dmabuf_iter() Add ACK to selftests/bpf: Add test for open coded dmabuf_iter T.J. Mercier (5): dma-buf: Rename debugfs symbols bpf: Add dmabuf iterator bpf: Add open coded dmabuf iterator selftests/bpf: Add test for dmabuf_iter selftests/bpf: Add test for open coded dmabuf_iter drivers/dma-buf/dma-buf.c | 98 ++++-- include/linux/dma-buf.h | 4 +- kernel/bpf/Makefile | 3 + kernel/bpf/dmabuf_iter.c | 150 +++++++++ kernel/bpf/helpers.c | 5 + .../testing/selftests/bpf/bpf_experimental.h | 5 + tools/testing/selftests/bpf/config | 3 + .../selftests/bpf/prog_tests/dmabuf_iter.c | 285 ++++++++++++++++++ .../testing/selftests/bpf/progs/dmabuf_iter.c | 91 ++++++ 9 files changed, 622 insertions(+), 22 deletions(-) create mode 100644 kernel/bpf/dmabuf_iter.c create mode 100644 tools/testing/selftests/bpf/prog_tests/dmabuf_iter.c create mode 100644 tools/testing/selftests/bpf/progs/dmabuf_iter.c base-commit: 43745d11bfd9683abdf08ad7a5cc403d6a9ffd15 -- 2.49.0.1045.g170613ef41-goog

1 month, 2 weeks

2
9
0 0

[PATCH v6 net-next 00/15] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the v6: v5 (09-May-2025) - Add #3 to utilize exisintg holes of tcp_sock_write_txrx group for later patches (#4, #9, #10) with new u8 members (Paolo Abeni <pabeni(a)redhat.com>) - Add pahole outcomes before and after commit in #4, #5, #6, #9, #10, #15 (Paolo Abeni <pabeni(a)redhat.com>) - Define new helper function tcp_send_ack_reflect_ect() for sending ACK with reflected ECT in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add comments for function tcp_ecn_rcv_synack() in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add enum/define to be used by sysctl_tcp_ecn in #5, sysctl_tcp_ecn_option in #9, and sysctl_tcp_ecn_option_beacon in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move accecn_fail_mode and saw_accecn_opt in #5 and #11 to use exisintg holes of tcp_sock (Paolo Abeni <pabeni(a)redhat.com>) - Change data type of new members of tcp_request_sock and move them to the end of struct in #5 and #11 (Paolo Abeni <pabeni(a)redhat.com>) - Move new members of tcp_info to the end of struct in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Merge previous #7 into #9 (Paolo Abeni <pabeni(a)redhat.com>) - Mask ecnfield with INET_ECN_MASK to remove WARN_ONCE in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Reduce the indentation levels for reabability in #9 and #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move delivered_ecn_bytes to the RX group in #9, accecn_opt_tstamp to the TX group in #10, pkts_acked_ewma to the RX group in #15 (Paolo Abeni <pabeni(a)redhat.com>) - Add changes in Documentation/networking/net_cachelines/tcp_sock.rst for new tcp_sock members in #3, #5, #6, #9, #10, #15 v5 (22-Apr-2025) - Further fix for 32-bit ARM alignment in tcp.c (Simon Horman <horms(a)kernel.org>) v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment requirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from the previous AccECN protocol preparation patch series to this patch series. The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 Best regards, Chia-Yu Chia-Yu Chang (2): tcp: reorganize tcp_sock_write_txrx group for variables later tcp: accecn: AccECN option failure handling Ilpo Järvinen (13): tcp: reorganize SYN ECN code tcp: fast path functions later tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option send control tcp: accecn: AccECN option ceb/cep heuristic tcp: accecn: AccECN ACE field multi-wrap heuristic tcp: accecn: try to fit AccECN option with SACK tcp: try to avoid safer when ACKs are thinned .../networking/net_cachelines/tcp_sock.rst | 14 + include/linux/tcp.h | 34 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 221 ++++++- include/uapi/linux/tcp.h | 7 + net/ipv4/syncookies.c | 3 + net/ipv4/sysctl_net_ipv4.c | 19 + net/ipv4/tcp.c | 30 +- net/ipv4/tcp_input.c | 608 +++++++++++++++++- net/ipv4/tcp_ipv4.c | 7 +- net/ipv4/tcp_minisocks.c | 92 ++- net/ipv4/tcp_output.c | 297 ++++++++- net/ipv6/syncookies.c | 1 + net/ipv6/tcp_ipv6.c | 1 + 14 files changed, 1237 insertions(+), 99 deletions(-) -- 2.34.1

1 month, 2 weeks

3
17
0 0

[PATCH v2] selftests: riscv: add misaligned access testing

by Clément Léger

This selftest tests all the currently emulated instructions (except for the RV32 compressed ones which are left as a future exercise for a RV32 user). For the FPU instructions, all the FPU registers are tested. Signed-off-by: Clément Léger <cleger(a)rivosinc.com> --- Note: This test can be executed with the FWFT series [1] or using an SBI firmware that delegates misaligned traps by default. If using QEMU, you will need the patches mentionned at [2] so that misaligned accesses will generate a trap. Note: This commit was part of a series [3] that was partially merged. Link: https://lore.kernel.org/all/20250424173204.1948385-1-cleger@rivosinc.com/ [1] Link: https://lore.kernel.org/all/20241211211933.198792-1-fkonrad@amd.com/ [2] Link: https://lore.kernel.org/linux-riscv/20250422162324.956065-1-cleger@rivosinc… [3] V2: - Fix commit description - FIx a few errors reported by checkpatch.pl --- tools/testing/selftests/riscv/Makefile | 2 +- .../selftests/riscv/misaligned/.gitignore | 1 + .../selftests/riscv/misaligned/Makefile | 12 + .../selftests/riscv/misaligned/common.S | 33 +++ .../testing/selftests/riscv/misaligned/fpu.S | 180 +++++++++++++ tools/testing/selftests/riscv/misaligned/gp.S | 103 +++++++ .../selftests/riscv/misaligned/misaligned.c | 254 ++++++++++++++++++ 7 files changed, 584 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/riscv/misaligned/.gitignore create mode 100644 tools/testing/selftests/riscv/misaligned/Makefile create mode 100644 tools/testing/selftests/riscv/misaligned/common.S create mode 100644 tools/testing/selftests/riscv/misaligned/fpu.S create mode 100644 tools/testing/selftests/riscv/misaligned/gp.S create mode 100644 tools/testing/selftests/riscv/misaligned/misaligned.c diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile index 099b8c1f46f8..95a98ceeb3b3 100644 --- a/tools/testing/selftests/riscv/Makefile +++ b/tools/testing/selftests/riscv/Makefile @@ -5,7 +5,7 @@ ARCH ?= $(shell uname -m 2>/dev/null || echo not) ifneq (,$(filter $(ARCH),riscv)) -RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector +RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector misaligned else RISCV_SUBTARGETS := endif diff --git a/tools/testing/selftests/riscv/misaligned/.gitignore b/tools/testing/selftests/riscv/misaligned/.gitignore new file mode 100644 index 000000000000..5eff15a1f981 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/.gitignore @@ -0,0 +1 @@ +misaligned diff --git a/tools/testing/selftests/riscv/misaligned/Makefile b/tools/testing/selftests/riscv/misaligned/Makefile new file mode 100644 index 000000000000..1aa40110c50d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 ARM Limited +# Originally tools/testing/arm64/abi/Makefile + +CFLAGS += -I$(top_srcdir)/tools/include + +TEST_GEN_PROGS := misaligned + +include ../../lib.mk + +$(OUTPUT)/misaligned: misaligned.c fpu.S gp.S + $(CC) -g3 -static -o$@ -march=rv64imafdc $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/misaligned/common.S b/tools/testing/selftests/riscv/misaligned/common.S new file mode 100644 index 000000000000..8fa00035bd5d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/common.S @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +.macro lb_sb temp, offset, src, dst + lb \temp, \offset(\src) + sb \temp, \offset(\dst) +.endm + +.macro copy_long_to temp, src, dst + lb_sb \temp, 0, \src, \dst, + lb_sb \temp, 1, \src, \dst, + lb_sb \temp, 2, \src, \dst, + lb_sb \temp, 3, \src, \dst, + lb_sb \temp, 4, \src, \dst, + lb_sb \temp, 5, \src, \dst, + lb_sb \temp, 6, \src, \dst, + lb_sb \temp, 7, \src, \dst, +.endm + +.macro sp_stack_prologue offset + addi sp, sp, -8 + sub sp, sp, \offset +.endm + +.macro sp_stack_epilogue offset + add sp, sp, \offset + addi sp, sp, 8 +.endm diff --git a/tools/testing/selftests/riscv/misaligned/fpu.S b/tools/testing/selftests/riscv/misaligned/fpu.S new file mode 100644 index 000000000000..d008bff58310 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/fpu.S @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +#define CASE_ALIGN 4 + +.macro fpu_load_inst fpreg, inst, precision, load_reg +.align CASE_ALIGN + \inst \fpreg, 0(\load_reg) + fmv.\precision fa0, \fpreg + j 2f +.endm + +#define flw(__fpreg) fpu_load_inst __fpreg, flw, s, s1 +#define fld(__fpreg) fpu_load_inst __fpreg, fld, d, s1 +#define c_flw(__fpreg) fpu_load_inst __fpreg, c.flw, s, s1 +#define c_fld(__fpreg) fpu_load_inst __fpreg, c.fld, d, s1 +#define c_fldsp(__fpreg) fpu_load_inst __fpreg, c.fldsp, d, sp + +.macro fpu_store_inst fpreg, inst, precision, store_reg +.align CASE_ALIGN + fmv.\precision \fpreg, fa0 + \inst \fpreg, 0(\store_reg) + j 2f +.endm + +#define fsw(__fpreg) fpu_store_inst __fpreg, fsw, s, s1 +#define fsd(__fpreg) fpu_store_inst __fpreg, fsd, d, s1 +#define c_fsw(__fpreg) fpu_store_inst __fpreg, c.fsw, s, s1 +#define c_fsd(__fpreg) fpu_store_inst __fpreg, c.fsd, d, s1 +#define c_fsdsp(__fpreg) fpu_store_inst __fpreg, c.fsdsp, d, sp + +.macro fp_test_prologue + move s1, a1 + /* + * Compute jump offset to store the correct FP register since we don't + * have indirect FP register access (or at least we don't use this + * extension so that works on all archs) + */ + sll t0, a0, CASE_ALIGN + la t2, 1f + add t0, t0, t2 + jr t0 +.align CASE_ALIGN +1: +.endm + +.macro fp_test_prologue_compressed + /* FP registers for compressed instructions starts from 8 to 16 */ + addi a0, a0, -8 + fp_test_prologue +.endm + +#define fp_test_body_compressed(__inst_func) \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ +2: + +#define fp_test_body(__inst_func) \ + __inst_func(f0); \ + __inst_func(f1); \ + __inst_func(f2); \ + __inst_func(f3); \ + __inst_func(f4); \ + __inst_func(f5); \ + __inst_func(f6); \ + __inst_func(f7); \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ + __inst_func(f16); \ + __inst_func(f17); \ + __inst_func(f18); \ + __inst_func(f19); \ + __inst_func(f20); \ + __inst_func(f21); \ + __inst_func(f22); \ + __inst_func(f23); \ + __inst_func(f24); \ + __inst_func(f25); \ + __inst_func(f26); \ + __inst_func(f27); \ + __inst_func(f28); \ + __inst_func(f29); \ + __inst_func(f30); \ + __inst_func(f31); \ +2: +.text + +#define __gen_test_inst(__inst, __suffix) \ +.global test_ ## __inst; \ +test_ ## __inst:; \ + fp_test_prologue ## __suffix; \ + fp_test_body ## __suffix(__inst); \ + ret + +#define gen_test_inst_compressed(__inst) \ + .option arch,+c; \ + __gen_test_inst(c_ ## __inst, _compressed) + +#define gen_test_inst(__inst) \ + .balign 16; \ + .option push; \ + .option arch,-c; \ + __gen_test_inst(__inst, ); \ + .option pop + +.macro fp_test_prologue_load_compressed_sp + copy_long_to t0, a1, sp +.endm + +.macro fp_test_epilogue_load_compressed_sp +.endm + +.macro fp_test_prologue_store_compressed_sp +.endm + +.macro fp_test_epilogue_store_compressed_sp + copy_long_to t0, sp, a1 +.endm + +#define gen_inst_compressed_sp(__inst, __type) \ + .global test_c_ ## __inst ## sp; \ + test_c_ ## __inst ## sp:; \ + sp_stack_prologue a2; \ + fp_test_prologue_## __type ## _compressed_sp; \ + fp_test_prologue_compressed; \ + fp_test_body_compressed(c_ ## __inst ## sp); \ + fp_test_epilogue_## __type ## _compressed_sp; \ + sp_stack_epilogue a2; \ + ret + +#define gen_test_load_compressed_sp(__inst) gen_inst_compressed_sp(__inst, load) +#define gen_test_store_compressed_sp(__inst) gen_inst_compressed_sp(__inst, store) + +/* + * float_fsw_reg - Set a FP register from a register containing the value + * a0 = FP register index to be set + * a1 = addr where to store register value + * a2 = address offset + * a3 = value to be store + */ +gen_test_inst(fsw) + +/* + * float_flw_reg - Get a FP register value and return it + * a0 = FP register index to be retrieved + * a1 = addr to load register from + * a2 = address offset + */ +gen_test_inst(flw) + +gen_test_inst(fsd) +#ifdef __riscv_compressed +gen_test_inst_compressed(fsd) +gen_test_store_compressed_sp(fsd) +#endif + +gen_test_inst(fld) +#ifdef __riscv_compressed +gen_test_inst_compressed(fld) +gen_test_load_compressed_sp(fld) +#endif diff --git a/tools/testing/selftests/riscv/misaligned/gp.S b/tools/testing/selftests/riscv/misaligned/gp.S new file mode 100644 index 000000000000..f53f4c6d81dd --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/gp.S @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +.text + +.macro __gen_test_inst inst, src_reg + \inst a2, 0(\src_reg) + move a0, a2 +.endm + +.macro gen_func_header func_name, rvc + .option arch,\rvc + .global test_\func_name + test_\func_name: +.endm + +.macro gen_test_inst inst + .option push + gen_func_header \inst, -c + __gen_test_inst \inst, a0 + .option pop + ret +.endm + +.macro __gen_test_inst_c name, src_reg + .option push + gen_func_header c_\name, +c + __gen_test_inst c.\name, \src_reg + .option pop + ret +.endm + +.macro gen_test_inst_c name + __gen_test_inst_c \name, a0 +.endm + + +.macro gen_test_inst_load_c_sp name + .option push + gen_func_header c_\name\()sp, +c + sp_stack_prologue a1 + copy_long_to t0, a0, sp + c.ldsp a0, 0(sp) + sp_stack_epilogue a1 + .option pop + ret +.endm + +.macro lb_sp_sb_a0 reg, offset + lb_sb \reg, \offset, sp, a0 +.endm + +.macro gen_test_inst_store_c_sp inst_name + .option push + gen_func_header c_\inst_name\()sp, +c + /* Misalign stack pointer */ + sp_stack_prologue a1 + /* Misalign access */ + c.sdsp a2, 0(sp) + copy_long_to t0, sp, a0 + sp_stack_epilogue a1 + .option pop + ret +.endm + + + /* + * a0 = addr to load from + * a1 = address offset + * a2 = value to be loaded + */ +gen_test_inst lh +gen_test_inst lhu +gen_test_inst lw +gen_test_inst lwu +gen_test_inst ld +#ifdef __riscv_compressed +gen_test_inst_c lw +gen_test_inst_c ld +gen_test_inst_load_c_sp ld +#endif + +/* + * a0 = addr where to store value + * a1 = address offset + * a2 = value to be stored + */ +gen_test_inst sh +gen_test_inst sw +gen_test_inst sd +#ifdef __riscv_compressed +gen_test_inst_c sw +gen_test_inst_c sd +gen_test_inst_store_c_sp sd +#endif + diff --git a/tools/testing/selftests/riscv/misaligned/misaligned.c b/tools/testing/selftests/riscv/misaligned/misaligned.c new file mode 100644 index 000000000000..11def5f67dd9 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/misaligned.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <linux/ptrace.h> +#include "../../kselftest_harness.h" + +#include <stdlib.h> +#include <stdio.h> +#include <stdint.h> +#include <float.h> +#include <errno.h> +#include <math.h> +#include <string.h> +#include <signal.h> +#include <stdbool.h> +#include <unistd.h> +#include <inttypes.h> +#include <ucontext.h> + +#include <sys/prctl.h> + +#define stringify(s) __stringify(s) +#define __stringify(s) #s + +#define VAL16 0x1234 +#define VAL32 0xDEADBEEF +#define VAL64 0x45674321D00DF789 + +#define VAL_float 78951.234375 +#define VAL_double 567890.512396965789589290 + +static bool float_equal(float a, float b) +{ + float scaled_epsilon; + float difference = fabsf(a - b); + + // Scale to the largest value. + a = fabsf(a); + b = fabsf(b); + if (a > b) + scaled_epsilon = FLT_EPSILON * a; + else + scaled_epsilon = FLT_EPSILON * b; + + return difference <= scaled_epsilon; +} + +static bool double_equal(double a, double b) +{ + double scaled_epsilon; + double difference = fabsf(a - b); + + // Scale to the largest value. + a = fabs(a); + b = fabs(b); + if (a > b) + scaled_epsilon = DBL_EPSILON * a; + else + scaled_epsilon = DBL_EPSILON * b; + + return difference <= scaled_epsilon; +} + +#define fpu_load_proto(__inst, __type) \ +extern __type test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_load_proto(flw, float); +fpu_load_proto(fld, double); +fpu_load_proto(c_flw, float); +fpu_load_proto(c_fld, double); +fpu_load_proto(c_fldsp, double); + +#define fpu_store_proto(__inst, __type) \ +extern void test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_store_proto(fsw, float); +fpu_store_proto(fsd, double); +fpu_store_proto(c_fsw, float); +fpu_store_proto(c_fsd, double); +fpu_store_proto(c_fsdsp, double); + +#define gp_load_proto(__inst, __type) \ +extern __type test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_load_proto(lh, uint16_t); +gp_load_proto(lhu, uint16_t); +gp_load_proto(lw, uint32_t); +gp_load_proto(lwu, uint32_t); +gp_load_proto(ld, uint64_t); +gp_load_proto(c_lw, uint32_t); +gp_load_proto(c_ld, uint64_t); +gp_load_proto(c_ldsp, uint64_t); + +#define gp_store_proto(__inst, __type) \ +extern void test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_store_proto(sh, uint16_t); +gp_store_proto(sw, uint32_t); +gp_store_proto(sd, uint64_t); +gp_store_proto(c_sw, uint32_t); +gp_store_proto(c_sd, uint64_t); +gp_store_proto(c_sdsp, uint64_t); + +#define TEST_GP_LOAD(__inst, __type_size) \ +TEST(gp_load_ ## __inst) \ +{ \ + int offset, ret; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (offset = 1; offset < (__type_size) / 8; offset++) { \ + uint ## __type_size ## _t val = VAL ## __type_size; \ + uint ## __type_size ## _t *ptr = (uint ## __type_size ## _t *)(buf + offset); \ + memcpy(ptr, &val, sizeof(val)); \ + val = test_ ## __inst(ptr, offset, val); \ + EXPECT_EQ(VAL ## __type_size, val); \ + } \ +} + +TEST_GP_LOAD(lh, 16); +TEST_GP_LOAD(lhu, 16); +TEST_GP_LOAD(lw, 32); +TEST_GP_LOAD(lwu, 32); +TEST_GP_LOAD(ld, 64); +#ifdef __riscv_compressed +TEST_GP_LOAD(c_lw, 32); +TEST_GP_LOAD(c_ld, 64); +TEST_GP_LOAD(c_ldsp, 64); +#endif + +#define TEST_GP_STORE(__inst, __type_size) \ +TEST(gp_load_ ## __inst) \ +{ \ + int offset, ret; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (offset = 1; offset < (__type_size) / 8; offset++) { \ + uint ## __type_size ## _t val = VAL ## __type_size; \ + uint ## __type_size ## _t *ptr = (uint ## __type_size ## _t *)(buf + offset); \ + memset(ptr, 0, sizeof(val)); \ + test_ ## __inst(ptr, offset, val); \ + memcpy(&val, ptr, sizeof(val)); \ + EXPECT_EQ(VAL ## __type_size, val); \ + } \ +} +TEST_GP_STORE(sh, 16); +TEST_GP_STORE(sw, 32); +TEST_GP_STORE(sd, 64); +#ifdef __riscv_compressed +TEST_GP_STORE(c_sw, 32); +TEST_GP_STORE(c_sd, 64); +TEST_GP_STORE(c_sdsp, 64); +#endif + +#define __TEST_FPU_LOAD(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_load_ ## __inst) \ +{ \ + int ret, offset, fp_reg; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + void *load_addr = (buf + offset); \ + __type val = VAL_ ## __type ; \ + \ + memcpy(load_addr, &val, sizeof(val)); \ + val = test_ ## __inst(fp_reg, load_addr, offset, val); \ + EXPECT_TRUE(__type ##_equal(val, VAL_## __type)); \ + } \ + } \ +} +#define TEST_FPU_LOAD(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 0, 32) +#define TEST_FPU_LOAD_COMPRESSED(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 8, 16) + +TEST_FPU_LOAD(float, flw) +TEST_FPU_LOAD(double, fld) +#ifdef __riscv_compressed +TEST_FPU_LOAD_COMPRESSED(double, c_fld) +TEST_FPU_LOAD_COMPRESSED(double, c_fldsp) +#endif + +#define __TEST_FPU_STORE(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_store_ ## __inst) \ +{ \ + int ret, offset, fp_reg; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + \ + void *store_addr = (buf + offset); \ + __type val = VAL_ ## __type ; \ + \ + test_ ## __inst(fp_reg, store_addr, offset, val); \ + memcpy(&val, store_addr, sizeof(val)); \ + EXPECT_TRUE(__type ## _equal(val, VAL_## __type)); \ + } \ + } \ +} +#define TEST_FPU_STORE(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 0, 32) +#define TEST_FPU_STORE_COMPRESSED(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 8, 16) + +TEST_FPU_STORE(float, fsw) +TEST_FPU_STORE(double, fsd) +#ifdef __riscv_compressed +TEST_FPU_STORE_COMPRESSED(double, c_fsd) +TEST_FPU_STORE_COMPRESSED(double, c_fsdsp) +#endif + +TEST_SIGNAL(gen_sigbus, SIGBUS) +{ + uint32_t *ptr; + uint8_t buf[16] __attribute__((aligned(16))); + int ret; + + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_SIGBUS); + ASSERT_EQ(ret, 0); + + ptr = (uint32_t *)(buf + 1); + *ptr = 0xDEADBEEFULL; +} + +int main(int argc, char **argv) +{ + int ret, val; + + ret = prctl(PR_GET_UNALIGN, &val); + if (ret == -1 && errno == EINVAL) + ksft_exit_skip("SKIP GET_UNALIGN_CTL not supported\n"); + + exit(test_harness_run(argc, argv)); +} -- 2.49.0

1 month, 2 weeks

1
0
0 0

[PATCH] selftests: riscv: add misaligned access testing

by Clément Léger

This selftest tests all the currently emulated instruction (except for the RV32 compressed ones which are left as a future exercise for a RV32 user). For the FPU instructions, all the FPU registers are tested. This commit can be tested using Signed-off-by: Clément Léger <cleger(a)rivosinc.com> --- Note: this test can be executed with the FWFT series [1] or using an SBI firmware that delegates misaligned traps by default. If using QEMU, you will need the patches mentionned at [2] so that misaligned accesses will generate a trap. Link: https://lore.kernel.org/all/20250424173204.1948385-1-cleger@rivosinc.com/ [1] Link: https://lore.kernel.org/all/20241211211933.198792-1-fkonrad@amd.com/ [2] tools/testing/selftests/riscv/Makefile | 2 +- .../selftests/riscv/misaligned/.gitignore | 1 + .../selftests/riscv/misaligned/Makefile | 12 + .../selftests/riscv/misaligned/common.S | 33 +++ .../testing/selftests/riscv/misaligned/fpu.S | 180 +++++++++++++ tools/testing/selftests/riscv/misaligned/gp.S | 103 +++++++ .../selftests/riscv/misaligned/misaligned.c | 254 ++++++++++++++++++ 7 files changed, 584 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/riscv/misaligned/.gitignore create mode 100644 tools/testing/selftests/riscv/misaligned/Makefile create mode 100644 tools/testing/selftests/riscv/misaligned/common.S create mode 100644 tools/testing/selftests/riscv/misaligned/fpu.S create mode 100644 tools/testing/selftests/riscv/misaligned/gp.S create mode 100644 tools/testing/selftests/riscv/misaligned/misaligned.c diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile index 099b8c1f46f8..95a98ceeb3b3 100644 --- a/tools/testing/selftests/riscv/Makefile +++ b/tools/testing/selftests/riscv/Makefile @@ -5,7 +5,7 @@ ARCH ?= $(shell uname -m 2>/dev/null || echo not) ifneq (,$(filter $(ARCH),riscv)) -RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector +RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector misaligned else RISCV_SUBTARGETS := endif diff --git a/tools/testing/selftests/riscv/misaligned/.gitignore b/tools/testing/selftests/riscv/misaligned/.gitignore new file mode 100644 index 000000000000..5eff15a1f981 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/.gitignore @@ -0,0 +1 @@ +misaligned diff --git a/tools/testing/selftests/riscv/misaligned/Makefile b/tools/testing/selftests/riscv/misaligned/Makefile new file mode 100644 index 000000000000..1aa40110c50d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 ARM Limited +# Originally tools/testing/arm64/abi/Makefile + +CFLAGS += -I$(top_srcdir)/tools/include + +TEST_GEN_PROGS := misaligned + +include ../../lib.mk + +$(OUTPUT)/misaligned: misaligned.c fpu.S gp.S + $(CC) -g3 -static -o$@ -march=rv64imafdc $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/misaligned/common.S b/tools/testing/selftests/riscv/misaligned/common.S new file mode 100644 index 000000000000..8fa00035bd5d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/common.S @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +.macro lb_sb temp, offset, src, dst + lb \temp, \offset(\src) + sb \temp, \offset(\dst) +.endm + +.macro copy_long_to temp, src, dst + lb_sb \temp, 0, \src, \dst, + lb_sb \temp, 1, \src, \dst, + lb_sb \temp, 2, \src, \dst, + lb_sb \temp, 3, \src, \dst, + lb_sb \temp, 4, \src, \dst, + lb_sb \temp, 5, \src, \dst, + lb_sb \temp, 6, \src, \dst, + lb_sb \temp, 7, \src, \dst, +.endm + +.macro sp_stack_prologue offset + addi sp, sp, -8 + sub sp, sp, \offset +.endm + +.macro sp_stack_epilogue offset + add sp, sp, \offset + addi sp, sp, 8 +.endm diff --git a/tools/testing/selftests/riscv/misaligned/fpu.S b/tools/testing/selftests/riscv/misaligned/fpu.S new file mode 100644 index 000000000000..d008bff58310 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/fpu.S @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +#define CASE_ALIGN 4 + +.macro fpu_load_inst fpreg, inst, precision, load_reg +.align CASE_ALIGN + \inst \fpreg, 0(\load_reg) + fmv.\precision fa0, \fpreg + j 2f +.endm + +#define flw(__fpreg) fpu_load_inst __fpreg, flw, s, s1 +#define fld(__fpreg) fpu_load_inst __fpreg, fld, d, s1 +#define c_flw(__fpreg) fpu_load_inst __fpreg, c.flw, s, s1 +#define c_fld(__fpreg) fpu_load_inst __fpreg, c.fld, d, s1 +#define c_fldsp(__fpreg) fpu_load_inst __fpreg, c.fldsp, d, sp + +.macro fpu_store_inst fpreg, inst, precision, store_reg +.align CASE_ALIGN + fmv.\precision \fpreg, fa0 + \inst \fpreg, 0(\store_reg) + j 2f +.endm + +#define fsw(__fpreg) fpu_store_inst __fpreg, fsw, s, s1 +#define fsd(__fpreg) fpu_store_inst __fpreg, fsd, d, s1 +#define c_fsw(__fpreg) fpu_store_inst __fpreg, c.fsw, s, s1 +#define c_fsd(__fpreg) fpu_store_inst __fpreg, c.fsd, d, s1 +#define c_fsdsp(__fpreg) fpu_store_inst __fpreg, c.fsdsp, d, sp + +.macro fp_test_prologue + move s1, a1 + /* + * Compute jump offset to store the correct FP register since we don't + * have indirect FP register access (or at least we don't use this + * extension so that works on all archs) + */ + sll t0, a0, CASE_ALIGN + la t2, 1f + add t0, t0, t2 + jr t0 +.align CASE_ALIGN +1: +.endm + +.macro fp_test_prologue_compressed + /* FP registers for compressed instructions starts from 8 to 16 */ + addi a0, a0, -8 + fp_test_prologue +.endm + +#define fp_test_body_compressed(__inst_func) \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ +2: + +#define fp_test_body(__inst_func) \ + __inst_func(f0); \ + __inst_func(f1); \ + __inst_func(f2); \ + __inst_func(f3); \ + __inst_func(f4); \ + __inst_func(f5); \ + __inst_func(f6); \ + __inst_func(f7); \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ + __inst_func(f16); \ + __inst_func(f17); \ + __inst_func(f18); \ + __inst_func(f19); \ + __inst_func(f20); \ + __inst_func(f21); \ + __inst_func(f22); \ + __inst_func(f23); \ + __inst_func(f24); \ + __inst_func(f25); \ + __inst_func(f26); \ + __inst_func(f27); \ + __inst_func(f28); \ + __inst_func(f29); \ + __inst_func(f30); \ + __inst_func(f31); \ +2: +.text + +#define __gen_test_inst(__inst, __suffix) \ +.global test_ ## __inst; \ +test_ ## __inst:; \ + fp_test_prologue ## __suffix; \ + fp_test_body ## __suffix(__inst); \ + ret + +#define gen_test_inst_compressed(__inst) \ + .option arch,+c; \ + __gen_test_inst(c_ ## __inst, _compressed) + +#define gen_test_inst(__inst) \ + .balign 16; \ + .option push; \ + .option arch,-c; \ + __gen_test_inst(__inst, ); \ + .option pop + +.macro fp_test_prologue_load_compressed_sp + copy_long_to t0, a1, sp +.endm + +.macro fp_test_epilogue_load_compressed_sp +.endm + +.macro fp_test_prologue_store_compressed_sp +.endm + +.macro fp_test_epilogue_store_compressed_sp + copy_long_to t0, sp, a1 +.endm + +#define gen_inst_compressed_sp(__inst, __type) \ + .global test_c_ ## __inst ## sp; \ + test_c_ ## __inst ## sp:; \ + sp_stack_prologue a2; \ + fp_test_prologue_## __type ## _compressed_sp; \ + fp_test_prologue_compressed; \ + fp_test_body_compressed(c_ ## __inst ## sp); \ + fp_test_epilogue_## __type ## _compressed_sp; \ + sp_stack_epilogue a2; \ + ret + +#define gen_test_load_compressed_sp(__inst) gen_inst_compressed_sp(__inst, load) +#define gen_test_store_compressed_sp(__inst) gen_inst_compressed_sp(__inst, store) + +/* + * float_fsw_reg - Set a FP register from a register containing the value + * a0 = FP register index to be set + * a1 = addr where to store register value + * a2 = address offset + * a3 = value to be store + */ +gen_test_inst(fsw) + +/* + * float_flw_reg - Get a FP register value and return it + * a0 = FP register index to be retrieved + * a1 = addr to load register from + * a2 = address offset + */ +gen_test_inst(flw) + +gen_test_inst(fsd) +#ifdef __riscv_compressed +gen_test_inst_compressed(fsd) +gen_test_store_compressed_sp(fsd) +#endif + +gen_test_inst(fld) +#ifdef __riscv_compressed +gen_test_inst_compressed(fld) +gen_test_load_compressed_sp(fld) +#endif diff --git a/tools/testing/selftests/riscv/misaligned/gp.S b/tools/testing/selftests/riscv/misaligned/gp.S new file mode 100644 index 000000000000..f53f4c6d81dd --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/gp.S @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +.text + +.macro __gen_test_inst inst, src_reg + \inst a2, 0(\src_reg) + move a0, a2 +.endm + +.macro gen_func_header func_name, rvc + .option arch,\rvc + .global test_\func_name + test_\func_name: +.endm + +.macro gen_test_inst inst + .option push + gen_func_header \inst, -c + __gen_test_inst \inst, a0 + .option pop + ret +.endm + +.macro __gen_test_inst_c name, src_reg + .option push + gen_func_header c_\name, +c + __gen_test_inst c.\name, \src_reg + .option pop + ret +.endm + +.macro gen_test_inst_c name + __gen_test_inst_c \name, a0 +.endm + + +.macro gen_test_inst_load_c_sp name + .option push + gen_func_header c_\name\()sp, +c + sp_stack_prologue a1 + copy_long_to t0, a0, sp + c.ldsp a0, 0(sp) + sp_stack_epilogue a1 + .option pop + ret +.endm + +.macro lb_sp_sb_a0 reg, offset + lb_sb \reg, \offset, sp, a0 +.endm + +.macro gen_test_inst_store_c_sp inst_name + .option push + gen_func_header c_\inst_name\()sp, +c + /* Misalign stack pointer */ + sp_stack_prologue a1 + /* Misalign access */ + c.sdsp a2, 0(sp) + copy_long_to t0, sp, a0 + sp_stack_epilogue a1 + .option pop + ret +.endm + + + /* + * a0 = addr to load from + * a1 = address offset + * a2 = value to be loaded + */ +gen_test_inst lh +gen_test_inst lhu +gen_test_inst lw +gen_test_inst lwu +gen_test_inst ld +#ifdef __riscv_compressed +gen_test_inst_c lw +gen_test_inst_c ld +gen_test_inst_load_c_sp ld +#endif + +/* + * a0 = addr where to store value + * a1 = address offset + * a2 = value to be stored + */ +gen_test_inst sh +gen_test_inst sw +gen_test_inst sd +#ifdef __riscv_compressed +gen_test_inst_c sw +gen_test_inst_c sd +gen_test_inst_store_c_sp sd +#endif + diff --git a/tools/testing/selftests/riscv/misaligned/misaligned.c b/tools/testing/selftests/riscv/misaligned/misaligned.c new file mode 100644 index 000000000000..8fa5ad1a93d1 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/misaligned.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <linux/ptrace.h> +#include "../../kselftest_harness.h" + +#include <stdlib.h> +#include <stdio.h> +#include <stdint.h> +#include <float.h> +#include <errno.h> +#include <math.h> +#include <string.h> +#include <signal.h> +#include <stdbool.h> +#include <unistd.h> +#include <inttypes.h> +#include <ucontext.h> + +#include <sys/prctl.h> + +#define stringify(s) __stringify(s) +#define __stringify(s) #s + +#define VAL16 0x1234 +#define VAL32 0xDEADBEEF +#define VAL64 0x45674321D00DF789 + +#define VAL_float 78951.234375 +#define VAL_double 567890.512396965789589290 + +static bool float_equal(float a, float b) +{ + float scaled_epsilon; + float difference = fabsf(a - b); + + // Scale to the largest value. + a = fabsf(a); + b = fabsf(b); + if (a > b) + scaled_epsilon = FLT_EPSILON * a; + else + scaled_epsilon = FLT_EPSILON * b; + + return difference <= scaled_epsilon; +} + +static bool double_equal(double a, double b) +{ + double scaled_epsilon; + double difference = fabsf(a - b); + + // Scale to the largest value. + a = fabs(a); + b = fabs(b); + if (a > b) + scaled_epsilon = DBL_EPSILON * a; + else + scaled_epsilon = DBL_EPSILON * b; + + return difference <= scaled_epsilon; +} + +#define fpu_load_proto(__inst, __type) \ +extern __type test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_load_proto(flw, float); +fpu_load_proto(fld, double); +fpu_load_proto(c_flw, float); +fpu_load_proto(c_fld, double); +fpu_load_proto(c_fldsp, double); + +#define fpu_store_proto(__inst, __type) \ +extern void test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_store_proto(fsw, float); +fpu_store_proto(fsd, double); +fpu_store_proto(c_fsw, float); +fpu_store_proto(c_fsd, double); +fpu_store_proto(c_fsdsp, double); + +#define gp_load_proto(__inst, __type) \ +extern __type test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_load_proto(lh, uint16_t); +gp_load_proto(lhu, uint16_t); +gp_load_proto(lw, uint32_t); +gp_load_proto(lwu, uint32_t); +gp_load_proto(ld, uint64_t); +gp_load_proto(c_lw, uint32_t); +gp_load_proto(c_ld, uint64_t); +gp_load_proto(c_ldsp, uint64_t); + +#define gp_store_proto(__inst, __type) \ +extern void test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_store_proto(sh, uint16_t); +gp_store_proto(sw, uint32_t); +gp_store_proto(sd, uint64_t); +gp_store_proto(c_sw, uint32_t); +gp_store_proto(c_sd, uint64_t); +gp_store_proto(c_sdsp, uint64_t); + +#define TEST_GP_LOAD(__inst, __type_size) \ +TEST(gp_load_ ## __inst) \ +{ \ + int offset, ret; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (offset = 1; offset < __type_size / 8; offset++) { \ + uint ## __type_size ## _t val = VAL ## __type_size; \ + uint ## __type_size ## _t *ptr = (uint ## __type_size ## _t *) (buf + offset); \ + memcpy(ptr, &val, sizeof(val)); \ + val = test_ ## __inst(ptr, offset, val); \ + EXPECT_EQ(VAL ## __type_size, val); \ + } \ +} + +TEST_GP_LOAD(lh, 16); +TEST_GP_LOAD(lhu, 16); +TEST_GP_LOAD(lw, 32); +TEST_GP_LOAD(lwu, 32); +TEST_GP_LOAD(ld, 64); +#ifdef __riscv_compressed +TEST_GP_LOAD(c_lw, 32); +TEST_GP_LOAD(c_ld, 64); +TEST_GP_LOAD(c_ldsp, 64); +#endif + +#define TEST_GP_STORE(__inst, __type_size) \ +TEST(gp_load_ ## __inst) \ +{ \ + int offset, ret; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (offset = 1; offset < __type_size / 8; offset++) { \ + uint ## __type_size ## _t val = VAL ## __type_size; \ + uint ## __type_size ## _t *ptr = (uint ## __type_size ## _t *) (buf + offset); \ + memset(ptr, 0, sizeof(val)); \ + test_ ## __inst(ptr, offset, val); \ + memcpy(&val, ptr, sizeof(val)); \ + EXPECT_EQ(VAL ## __type_size, val); \ + } \ +} +TEST_GP_STORE(sh, 16); +TEST_GP_STORE(sw, 32); +TEST_GP_STORE(sd, 64); +#ifdef __riscv_compressed +TEST_GP_STORE(c_sw, 32); +TEST_GP_STORE(c_sd, 64); +TEST_GP_STORE(c_sdsp, 64); +#endif + +#define __TEST_FPU_LOAD(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_load_ ## __inst) \ +{ \ + int ret, offset, fp_reg; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + void *load_addr = (buf + offset); \ + __type val = VAL_ ## __type ; \ + \ + memcpy(load_addr, &val, sizeof(val)); \ + val = test_ ## __inst(fp_reg, load_addr, offset, val); \ + EXPECT_TRUE(__type ##_equal(val, VAL_## __type)); \ + } \ + } \ +} +#define TEST_FPU_LOAD(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 0, 32) +#define TEST_FPU_LOAD_COMPRESSED(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 8, 16) + +TEST_FPU_LOAD(float, flw) +TEST_FPU_LOAD(double, fld) +#ifdef __riscv_compressed +TEST_FPU_LOAD_COMPRESSED(double, c_fld) +TEST_FPU_LOAD_COMPRESSED(double, c_fldsp) +#endif + +#define __TEST_FPU_STORE(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_store_ ## __inst) \ +{ \ + int ret, offset, fp_reg; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + \ + void *store_addr = (buf + offset); \ + __type val = VAL_ ## __type ; \ + \ + test_ ## __inst(fp_reg, store_addr, offset, val); \ + memcpy(&val, store_addr, sizeof(val)); \ + EXPECT_TRUE(__type ## _equal(val, VAL_## __type)); \ + } \ + } \ +} +#define TEST_FPU_STORE(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 0, 32) +#define TEST_FPU_STORE_COMPRESSED(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 8, 16) + +TEST_FPU_STORE(float, fsw) +TEST_FPU_STORE(double, fsd) +#ifdef __riscv_compressed +TEST_FPU_STORE_COMPRESSED(double, c_fsd) +TEST_FPU_STORE_COMPRESSED(double, c_fsdsp) +#endif + +TEST_SIGNAL(gen_sigbus, SIGBUS) +{ + uint32_t *ptr; + uint8_t buf[16] __attribute__((aligned(16))); + int ret; + + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_SIGBUS); + ASSERT_EQ(ret, 0); + + ptr = (uint32_t *)(buf + 1); + *ptr = 0xDEADBEEFULL; +} + +int main(int argc, char **argv) +{ + int ret, val; + + ret = prctl(PR_GET_UNALIGN, &val); + if (ret == -1 && errno == EINVAL) + ksft_exit_skip("SKIP GET_UNALIGN_CTL not supported\n"); + + exit(test_harness_run(argc, argv)); +} -- 2.49.0

1 month, 2 weeks

2
2
0 0

[PATCH net-next v4] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is automatically built, though not used. Only tested on x86. To run: $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Output (vmtest.sh): TAP version 13 1..3 not ok 1 vm_server_host_client # exit=1 ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=2 SKIP=0 FAIL=1 1..3 Future work can include vsock_diag_test. The tap output style copies mm's run_vmtests.sh. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). I've began testing this in one of the NIPA environments Jakub as graciously provided. I would expect at least one more revision to have that setup ironed out and fully tested. Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 17 ++ tools/testing/selftests/vsock/config | 114 +++++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 423 +++++++++++++++++++++++++++++++ 6 files changed, 558 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031e..3fbdd7bbfce7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 000000000000..9c5bf379480f --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 000000000000..71fca0a2b8da --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) + +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test + install -m 755 $< $@ + +$(TOOLSDIR)/testing/vsock/vsock_test: + $(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test + +TEST_PROGS += vmtest.sh +EXTRA_CLEAN += vmtest.log +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 000000000000..3bffaaf98fff --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,114 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 000000000000..694d70710ff0 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 000000000000..d7e727306175 --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,423 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +TAP_PREFIX="# " +VERBOSE=0 +KSFT_PASS=0 +KSFT_FAIL=1 +KSFT_SKIP=4 +SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" +VSOCK_TEST=${SCRIPT_DIR}/vsock_test + +TEST_GUEST_PORT=51000 +TEST_HOST_PORT=50000 +TEST_HOST_PORT_LISTENER=50001 +SSH_GUEST_PORT=22 +SSH_HOST_PORT=2222 +VSOCK_CID=1234 +WAIT_PERIOD=3 +WAIT_PERIOD_MAX=20 +WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) + +QEMU_PIDFILE=/tmp/qemu.pid + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh virtme_ssh_user=$USER" + +LOG=${SCRIPT_DIR}/vmtest.log + +TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +usage() { + local name + local desc + local i + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -v: verbose output" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit ${KSFT_FAIL} +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost $* + return $? +} + +cleanup() { + if [[ -f "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F ${QEMU_PIDFILE} 2>&1 > /dev/null + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox timeout pkill ssh; do + if [[ ! -x "$(command -v ${dep})" ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit ${KSFT_SKIP} + fi + done + + if [[ ! -x $(command -v ${VSOCK_TEST}) ]]; then + printf "skip: ${VSOCK_TEST} not found!" + printf " Please build the kselftest vsock target.\n" + exit ${KSFT_SKIP} + fi +} + +vm_setup() { + local VNG_OPTS="" + local logfile=/dev/null + + if [[ "${VERBOSE}" = 1 ]]; then + VNG_OPTS="--verbose" + logfile=/dev/stdout + fi + vng \ + $VNG_OPTS \ + --run \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${QEMU}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -e '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0' + if [[ ! $? -eq 0 ]]; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + i=0 + while [[ true ]]; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + vm_ssh -- true + if [[ $? -eq 0 ]]; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +wait_for_listener() { + local port=$1 + local interval=$2 + local max_intervals=$3 + local i=0 + while ! ss -ltn | grep -q ":${port}"; do + if [[ ${i} -gt ${max_intervals} ]]; then + die "Timed out waiting for listener on port ${port}" + fi + i=$(( i + 1 )) + sleep ${interval} + done +} + +vm_wait_for_listener() { + local port=$1 + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener ${TEST_HOST_PORT_LISTENER} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + shift + + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a ${LOG} > ${redirect} + else + __log_args | tee -a ${LOG} > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + testname=$1 + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + testname=$1 + shift + log "test:${testname}:guest" "$@" +} + +tap_prefix() { + sed -e "s/^/${TAP_PREFIX}/" +} + +tap_output() { + if [[ ! -z "$TAP_PREFIX" ]]; then + read str + echo $str + fi +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${TEST_GUEST_PORT} + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- ${VSOCK_TEST} \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${port} + + vm_ssh -- ${VSOCK_TEST} \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + unset IFS + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "${name}: kernel oops detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "${name}: kernel warning detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "${name}: kernel oops detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "${name}: kernel warning detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + return ${rc} +} + +while getopts :hvsq: o +do + case $o in + v) VERBOSE=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=(${TEST_NAMES[@]}) +else + ARGS=($@) +fi + +check_args "${ARGS[@]}" +check_deps + +QEMU=$(command -v ${QEMU:-qemu-system-$(uname -m)}) + +echo "TAP version 13" | tap_output +echo "1..${#ARGS[@]}" | tap_output + +rm -f "${LOG}" +log_setup "Booting up VM" +vm_setup +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +exitcode=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} == $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "[PASS]" | tap_prefix + echo "ok ${cnt_total} ${arg}" | tap_output + elif [[ ${rc} == $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "[SKIP]" | tap_prefix + echo "ok ${cnt_total} ${arg} # SKIP" | tap_output + exitcode=$KSFT_SKIP + elif [[ ${rc} == $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "[FAIL]" | tap_prefix + echo "not ok ${cnt_fail} ${arg} # exit=$rc" | tap_output + exitcode=$KSFT_FAIL + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" | tap_prefix +echo "1..${cnt_total}" | tap_output + +exit ${rc} --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

1 month, 2 weeks

2
2
0 0

[PATCH] selftests: add missing include

by Chen Linxuan

I failed to build this test on Ubuntu 24.04. Compiler complained about undefined functions mount, umount and some mount related flags. Signed-off-by: Chen Linxuan <chenlinxuan(a)uniontech.com> --- tools/testing/selftests/pid_namespace/pid_max.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/pid_namespace/pid_max.c b/tools/testing/selftests/pid_namespace/pid_max.c index 51c414faabb0f..972bedc475f12 100644 --- a/tools/testing/selftests/pid_namespace/pid_max.c +++ b/tools/testing/selftests/pid_namespace/pid_max.c @@ -11,6 +11,7 @@ #include <string.h> #include <syscall.h> #include <sys/wait.h> +#include <sys/mount.h> #include "../kselftest_harness.h" #include "../pidfd/pidfd.h" -- 2.43.0

1 month, 3 weeks

1
0
0 0

[PATCH] selftests: size: fix grammar and align output formatting

by Abdelrahman Fekry

Improve the grammar in the test name by changing "get runtime memory use" to "get runtime memory usage". Also adjust spacing in output lines ("Total:", "Free:", etc.) to ensure consistent alignment and readability. Signed-off-by: Abdelrahman Fekry <AbdelrahmanFekry375(a)gmail.com> --- tools/testing/selftests/size/get_size.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/size/get_size.c b/tools/testing/selftests/size/get_size.c index 2980b1a63366..d5b67c073d8e 100644 --- a/tools/testing/selftests/size/get_size.c +++ b/tools/testing/selftests/size/get_size.c @@ -86,7 +86,7 @@ void _start(void) int ccode; struct sysinfo info; unsigned long used; - static const char *test_name = " get runtime memory use\n"; + static const char *test_name = " get runtime memory usage\n"; print("TAP version 13\n"); print("# Testing system size.\n"); @@ -105,8 +105,8 @@ void _start(void) used = info.totalram - info.freeram - info.bufferram; print("# System runtime memory report (units in Kilobytes):\n"); print(" ---\n"); - print_k_value(" Total: ", info.totalram, info.mem_unit); - print_k_value(" Free: ", info.freeram, info.mem_unit); + print_k_value(" Total : ", info.totalram, info.mem_unit); + print_k_value(" Free : ", info.freeram, info.mem_unit); print_k_value(" Buffer: ", info.bufferram, info.mem_unit); print_k_value(" In use: ", used, info.mem_unit); print(" ...\n"); -- 2.25.1

1 month, 3 weeks

1
0
0 0

[PATCH] Fix typo in 'limit' for bpf test

by Thomas Thelen

Signed-off-by: Thomas Thelen <tommythelen(a)gmail.com> --- tools/testing/selftests/bpf/bench.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/bench.c b/tools/testing/selftests/bpf/bench.c index 1bd403a5ef7b..b25db4142126 100644 --- a/tools/testing/selftests/bpf/bench.c +++ b/tools/testing/selftests/bpf/bench.c @@ -497,7 +497,7 @@ extern const struct bench bench_rename_rawtp; extern const struct bench bench_rename_fentry; extern const struct bench bench_rename_fexit; -/* pure counting benchmarks to establish theoretical lmits */ +/* pure counting benchmarks to establish theoretical limits */ extern const struct bench bench_trig_usermode_count; extern const struct bench bench_trig_syscall_count; extern const struct bench bench_trig_kernel_count; -- 2.48.1

1 month, 3 weeks

1
0
0 0

[RFC PATCH 00/39] 1G page support for guest_memfd

by Ackerley Tng

Hello, This patchset is our exploration of how to support 1G pages in guest_memfd, and how the pages will be used in Confidential VMs. The patchset covers: + How to get 1G pages + Allowing mmap() of guest_memfd to userspace so that both private and shared memory can use the same physical pages + Splitting and reconstructing pages to support conversions and mmap() + How the VM, userspace and guest_memfd interact to support conversions + Selftests to test all the above + Selftests also demonstrate the conversion flow between VM, userspace and guest_memfd. Why 1G pages in guest memfd? Bring guest_memfd to performance and memory savings parity with VMs that are backed by HugeTLBfs. + Performance is improved with 1G pages by more TLB hits and faster page walks on TLB misses. + Memory savings from 1G pages comes from HugeTLB Vmemmap Optimization (HVO). Options for 1G page support: 1. HugeTLB 2. Contiguous Memory Allocator (CMA) 3. Other suggestions are welcome! Comparison between options: 1. HugeTLB + Refactor HugeTLB to separate allocator from the rest of HugeTLB + Pro: Graceful transition for VMs backed with HugeTLB to guest_memfd + Near term: Allows co-tenancy of HugeTLB and guest_memfd backed VMs + Pro: Can provide iterative steps toward new future allocator + Unexplored: Managing userspace-visible changes + e.g. HugeTLB's free_hugepages will decrease if HugeTLB is used, but not when future allocator is used 2. CMA + Port some HugeTLB features to be applied on CMA + Pro: Clean slate What would refactoring HugeTLB involve? (Some refactoring was done in this RFC, more can be done.) 1. Broadly involves separating the HugeTLB allocator from the rest of HugeTLB + Brings more modularity to HugeTLB + No functionality change intended + Likely step towards HugeTLB's integration into core-mm 2. guest_memfd will use just the allocator component of HugeTLB, not including the complex parts of HugeTLB like + Userspace reservations (resv_map) + Shared PMD mappings + Special page walkers What features would need to be ported to CMA? + Improved allocation guarantees + Per NUMA node pool of huge pages + Subpools per guest_memfd + Memory savings + Something like HugeTLB Vmemmap Optimization + Configuration/reporting features + Configuration of number of pages available (and per NUMA node) at and after host boot + Reporting of memory usage/availability statistics at runtime HugeTLB was picked as the source of 1G pages for this RFC because it allows a graceful transition, and retains memory savings from HVO. To illustrate this, if a host machine uses HugeTLBfs to back VMs, and a confidential VM were to be scheduled on that host, some HugeTLBfs pages would have to be given up and returned to CMA for guest_memfd pages to be rebuilt from that memory. This requires memory to be reserved for HVO to be removed and reapplied on the new guest_memfd memory. This not only slows down memory allocation but also trims the benefits of HVO. Memory would have to be reserved on the host to facilitate these transitions. Improving how guest_memfd uses the allocator in a future revision of this RFC: To provide an easier transition away from HugeTLB, guest_memfd's use of HugeTLB should be limited to these allocator functions: + reserve(node, page_size, num_pages) => opaque handle + Used when a guest_memfd inode is created to reserve memory from backend allocator + allocate(handle, mempolicy, page_size) => folio + To allocate a folio from guest_memfd's reservation + split(handle, folio, target_page_size) => void + To take a huge folio, and split it to smaller folios, restore to filemap + reconstruct(handle, first_folio, nr_pages) => void + To take a folio, and reconstruct a huge folio out of nr_pages from the first_folio + free(handle, folio) => void + To return folio to guest_memfd's reservation + error(handle, folio) => void + To handle memory errors + unreserve(handle) => void + To return guest_memfd's reservation to allocator backend Userspace should only provide a page size when creating a guest_memfd and should not have to specify HugeTLB. Overview of patches: + Patches 01-12 + Many small changes to HugeTLB, mostly to separate HugeTLBfs concepts from HugeTLB, and to expose HugeTLB functions. + Patches 13-16 + Letting guest_memfd use HugeTLB + Creation of each guest_memfd reserves pages from HugeTLB's global hstate and puts it into the guest_memfd inode's subpool + Each folio allocation takes a page from the guest_memfd inode's subpool + Patches 17-21 + Selftests for new HugeTLB features in guest_memfd + Patches 22-24 + More small changes on the HugeTLB side to expose functions needed by guest_memfd + Patch 25: + Uses the newly available functions from patches 22-24 to split HugeTLB pages. In this patch, HugeTLB folios are always split to 4K before any usage, private or shared. + Patches 26-28 + Allow mmap() in guest_memfd and faulting in shared pages + Patch 29 + Enables conversion between private/shared pages + Patch 30 + Required to zero folios after conversions to avoid leaking initialized kernel memory + Patch 31-38 + Add selftests to test mapping pages to userspace, guest/host memory sharing and update conversions tests + Patch 33 illustrates the conversion flow between VM/userspace/guest_memfd + Patch 39 + Dynamically split and reconstruct HugeTLB pages instead of always splitting before use. All earlier selftests are expected to still pass. TODOs: + Add logic to wait for safe_refcount [1] + Look into lazy splitting/reconstruction of pages + Currently, when the KVM_SET_MEMORY_ATTRIBUTES is invoked, not only is the mem_attr_array and faultability updated, the pages in the requested range are also split/reconstructed as necessary. We want to look into delaying splitting/reconstruction to fault time. + Solve race between folios being faulted in and being truncated + When running private_mem_conversions_test with more than 1 vCPU, a folio getting truncated may get faulted in by another process, causing elevated mapcounts when the folio is freed (VM_BUG_ON_FOLIO). + Add intermediate splits (1G should first split to 2M and not split directly to 4K) + Use guest's lock instead of hugetlb_lock + Use multi-index xarray/replace xarray with some other data struct for faultability flag + Refactor HugeTLB better, present generic allocator interface Please let us know your thoughts on: + HugeTLB as the choice of transitional allocator backend + Refactoring HugeTLB to provide generic allocator interface + Shared/private conversion flow + Requiring user to request kernel to unmap pages from userspace using madvise(MADV_DONTNEED) + Failing conversion on elevated mapcounts/pincounts/refcounts + Process of splitting/reconstructing page + Anything else! [1] https://lore.kernel.org/all/20240829-guest-memfd-lib-v2-0-b9afc1ff3656@quic… Ackerley Tng (37): mm: hugetlb: Simplify logic in dequeue_hugetlb_folio_vma() mm: hugetlb: Refactor vma_has_reserves() to should_use_hstate_resv() mm: hugetlb: Remove unnecessary check for avoid_reserve mm: mempolicy: Refactor out policy_node_nodemask() mm: hugetlb: Refactor alloc_buddy_hugetlb_folio_with_mpol() to interpret mempolicy instead of vma mm: hugetlb: Refactor dequeue_hugetlb_folio_vma() to use mpol mm: hugetlb: Refactor out hugetlb_alloc_folio mm: truncate: Expose preparation steps for truncate_inode_pages_final mm: hugetlb: Expose hugetlb_subpool_{get,put}_pages() mm: hugetlb: Add option to create new subpool without using surplus mm: hugetlb: Expose hugetlb_acct_memory() mm: hugetlb: Move and expose hugetlb_zero_partial_page() KVM: guest_memfd: Make guest mem use guest mem inodes instead of anonymous inodes KVM: guest_memfd: hugetlb: initialization and cleanup KVM: guest_memfd: hugetlb: allocate and truncate from hugetlb KVM: guest_memfd: Add page alignment check for hugetlb guest_memfd KVM: selftests: Add basic selftests for hugetlb-backed guest_memfd KVM: selftests: Support various types of backing sources for private memory KVM: selftests: Update test for various private memory backing source types KVM: selftests: Add private_mem_conversions_test.sh KVM: selftests: Test that guest_memfd usage is reported via hugetlb mm: hugetlb: Expose vmemmap optimization functions mm: hugetlb: Expose HugeTLB functions for promoting/demoting pages mm: hugetlb: Add functions to add/move/remove from hugetlb lists KVM: guest_memfd: Track faultability within a struct kvm_gmem_private KVM: guest_memfd: Allow mmapping guest_memfd files KVM: guest_memfd: Use vm_type to determine default faultability KVM: Handle conversions in the SET_MEMORY_ATTRIBUTES ioctl KVM: guest_memfd: Handle folio preparation for guest_memfd mmap KVM: selftests: Allow vm_set_memory_attributes to be used without asserting return value of 0 KVM: selftests: Test using guest_memfd memory from userspace KVM: selftests: Test guest_memfd memory sharing between guest and host KVM: selftests: Add notes in private_mem_kvm_exits_test for mmap-able guest_memfd KVM: selftests: Test that pinned pages block KVM from setting memory attributes to PRIVATE KVM: selftests: Refactor vm_mem_add to be more flexible KVM: selftests: Add helper to perform madvise by memslots KVM: selftests: Update private_mem_conversions_test for mmap()able guest_memfd Vishal Annapurve (2): KVM: guest_memfd: Split HugeTLB pages for guest_memfd use KVM: guest_memfd: Dynamically split/reconstruct HugeTLB page fs/hugetlbfs/inode.c | 35 +- include/linux/hugetlb.h | 54 +- include/linux/kvm_host.h | 1 + include/linux/mempolicy.h | 2 + include/linux/mm.h | 1 + include/uapi/linux/kvm.h | 26 + include/uapi/linux/magic.h | 1 + mm/hugetlb.c | 346 ++-- mm/hugetlb_vmemmap.h | 11 - mm/mempolicy.c | 36 +- mm/truncate.c | 26 +- tools/include/linux/kernel.h | 4 +- tools/testing/selftests/kvm/Makefile | 3 + .../kvm/guest_memfd_hugetlb_reporting_test.c | 222 +++ .../selftests/kvm/guest_memfd_pin_test.c | 104 ++ .../selftests/kvm/guest_memfd_sharing_test.c | 160 ++ .../testing/selftests/kvm/guest_memfd_test.c | 238 ++- .../testing/selftests/kvm/include/kvm_util.h | 45 +- .../testing/selftests/kvm/include/test_util.h | 18 + tools/testing/selftests/kvm/lib/kvm_util.c | 443 +++-- tools/testing/selftests/kvm/lib/test_util.c | 99 ++ .../kvm/x86_64/private_mem_conversions_test.c | 158 +- .../x86_64/private_mem_conversions_test.sh | 91 + .../kvm/x86_64/private_mem_kvm_exits_test.c | 11 +- virt/kvm/guest_memfd.c | 1563 ++++++++++++++++- virt/kvm/kvm_main.c | 17 + virt/kvm/kvm_mm.h | 16 + 27 files changed, 3288 insertions(+), 443 deletions(-) create mode 100644 tools/testing/selftests/kvm/guest_memfd_hugetlb_reporting_test.c create mode 100644 tools/testing/selftests/kvm/guest_memfd_pin_test.c create mode 100644 tools/testing/selftests/kvm/guest_memfd_sharing_test.c create mode 100755 tools/testing/selftests/kvm/x86_64/private_mem_conversions_test.sh -- 2.46.0.598.g6f2099f65c-goog

1 month, 3 weeks

17
129
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror