- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v9 00/23] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

This is the 9th version of the ovpn patchset. It re-introduces the RTNL Link ops and brings some changes to the Netlink API as well. Notably: * removed CMD_DEV_NEW/DEL from netlink API * re-added rtnl_link_ops.newlink implementation * removed all 'value-start: 0' from ovpn.yaml * added CMD_KEY_GET in Netlink API to retrieve non-sensible key data * used key-get in notify attribute of key-swap-nft * ensured that all netdev references are tracked * added IFF_NO_QUEUE to device priv_flags * set netdev devtype to ovpn_type * added implementation of .ndo_uninit * used workqueue to release socket (TCP detach may block) * removed inclusion of linux/version.h in main.c * removed commented inclusion of linux/rcupdate.h in main.c * fixed file path in MAINTAINERS file * properly sorted files in MAINTAINERS file Please note that patches previously reviewed by Andrew Lunn have retained the Reviewed-by tag as they have been simply rebased without major modifications. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (23): netlink: add NLA_POLICY_MAX_LEN macro net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ovpn: implement TCP transport ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/dump/delete via netlink ovpn: implement key add/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftest: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 362 ++++ MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 54 + drivers/net/ovpn/bind.h | 117 ++ drivers/net/ovpn/crypto.c | 172 ++ drivers/net/ovpn/crypto.h | 141 ++ drivers/net/ovpn/crypto_aead.c | 356 ++++ drivers/net/ovpn/crypto_aead.h | 31 + drivers/net/ovpn/io.c | 461 +++++ drivers/net/ovpn/io.h | 25 + drivers/net/ovpn/main.c | 337 ++++ drivers/net/ovpn/main.h | 24 + drivers/net/ovpn/netlink-gen.c | 212 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1039 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnstruct.h | 61 + drivers/net/ovpn/packet.h | 40 + drivers/net/ovpn/peer.c | 1197 ++++++++++++ drivers/net/ovpn/peer.h | 165 ++ drivers/net/ovpn/pktid.c | 130 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 104 + drivers/net/ovpn/skb.h | 61 + drivers/net/ovpn/socket.c | 178 ++ drivers/net/ovpn/socket.h | 55 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 505 +++++ drivers/net/ovpn/tcp.h | 44 + drivers/net/ovpn/udp.c | 406 ++++ drivers/net/ovpn/udp.h | 26 + include/net/netlink.h | 1 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 109 ++ include/uapi/linux/udp.h | 1 + tools/net/ynl/ynl-gen-c.py | 4 +- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 16 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data-test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/data-test.sh | 157 ++ tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/float-test.sh | 122 ++ tools/testing/selftests/net/ovpn/ovpn-cli.c | 2136 +++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 51 files changed, 9163 insertions(+), 1 deletion(-) --- base-commit: 6d858708d465669ba7de17e9c5691eb4019166e8 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

1 year

4
32
0 0

[PATCH] selftests/net: Add missing va_end in test_snprintf

by Liu Jing

There is no va_end after va_copy, just add it. Signed-off-by: Liu Jing <liujing_yewu(a)cmss.chinamobile.com> Signed-off-by: Liu Jing <liujing(a)cmss.chinamobile.com> --- tools/testing/selftests/net/tcp_ao/lib/aolib.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/tcp_ao/lib/aolib.h b/tools/testing/selftests/net/tcp_ao/lib/aolib.h index db44e77428dd..5db2f65cddc4 100644 --- a/tools/testing/selftests/net/tcp_ao/lib/aolib.h +++ b/tools/testing/selftests/net/tcp_ao/lib/aolib.h @@ -46,6 +46,7 @@ static inline char *test_snprintf(const char *fmt, va_list vargs) va_copy(tmp, vargs); n = vsnprintf(ret, size, fmt, tmp); + va_end(tmp); if (n < 0) return NULL; -- 2.27.0

1 year

2
1
0 0

[GIT PULL] Kselftest fixes update for Linux 6.12-rc4

by Shuah Khan

Hi Linus, Please pull the following kselftest fixes update for Linux 6.12-rc4. -- fixes test makefile to install tests directory without which the test fails with errors. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 4ee5ca9a29384fcf3f18232fdf8474166dea8dca: ftrace/selftest: Test combination of function_graph tracer and function profiler are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-fixes-6.12-rc4 for you to fetch changes up to fe05c40ca9c18cfdb003f639a30fc78a7ab49519: selftest: hid: add the missing tests directory (2024-10-16 15:55:14 -0600) ---------------------------------------------------------------- linux_kselftest-fixes-6.12-rc4 kselftest fixes for Linux 6.12-rc4 -- fixes test makefile to install tests directory without which the test fails with errors. ---------------------------------------------------------------- Yun Lu (1): selftest: hid: add the missing tests directory tools/testing/selftests/hid/Makefile | 1 + 1 file changed, 1 insertion(+) ----------------------------------------------------------------

1 year

2
1
0 0

[PATCH 0/4] implement lightweight guard pages

by Lorenzo Stoakes

Userland library functions such as allocators and threading implementations often require regions of memory to act as 'guard pages' - mappings which, when accessed, result in a fatal signal being sent to the accessing process. The current means by which these are implemented is via a PROT_NONE mmap() mapping, which provides the required semantics however incur an overhead of a VMA for each such region. With a great many processes and threads, this can rapidly add up and incur a significant memory penalty. It also has the added problem of preventing merges that might otherwise be permitted. This series takes a different approach - an idea suggested by Vlasimil Babka (and before him David Hildenbrand and Jann Horn - perhaps more - the provenance becomes a little tricky to ascertain after this - please forgive any omissions!) - rather than locating the guard pages at the VMA layer, instead placing them in page tables mapping the required ranges. Early testing of the prototype version of this code suggests a 5 times speed up in memory mapping invocations (in conjunction with use of process_madvise()) and a 13% reduction in VMAs on an entirely idle android system and unoptimised code. We expect with optimisation and a loaded system with a larger number of guard pages this could significantly increase, but in any case these numbers are encouraging. This way, rather than having separate VMAs specifying which parts of a range are guard pages, instead we have a VMA spanning the entire range of memory a user is permitted to access and including ranges which are to be 'guarded'. After mapping this, a user can specify which parts of the range should result in a fatal signal when accessed. By restricting the ability to specify guard pages to memory mapped by existing VMAs, we can rely on the mappings being torn down when the mappings are ultimately unmapped and everything works simply as if the memory were not faulted in, from the point of view of the containing VMAs. This mechanism in effect poisons memory ranges similar to hardware memory poisoning, only it is an entirely software-controlled form of poisoning. Any poisoned region of memory is also able to 'unpoisoned', that is, to have its poison markers removed. The mechanism is implemented via madvise() behaviour - MADV_GUARD_POISON which simply poisons ranges - and MADV_GUARD_UNPOISON - which clears this poisoning. Poisoning can be performed across multiple VMAs and any existing mappings will be cleared, that is zapped, before installing the poisoned page table mappings. There is no concept of 'nested' poisoning, multiple attempts to poison a range will, after the first poisoning, have no effect. Importantly, unpoisoning of poisoned ranges has no effect on non-poisoned memory, so a user can safely unpoison a range of memory and clear only poison page table mappings leaving the rest intact. The actual mechanism by which the page table entries are specified makes use of existing logic - PTE markers, which are used for the userfaultfd UFFDIO_POISON mechanism. Unfortunately PTE_MARKER_POISONED is not suited for the guard page mechanism as it results in VM_FAULT_HWPOISON semantics in the fault handler, so we add our own specific PTE_MARKER_GUARD and adapt existing logic to handle it. We also extend the generic page walk mechanism to allow for installation of PTEs (carefully restricted to memory management logic only to prevent unwanted abuse). We ensure that zapping performed by, for instance, MADV_DONTNEED, does not remove guard poison markers, nor does forking (except when VM_WIPEONFORK is specified for a VMA which implies a total removal of memory characteristics). It's important to note that the guard page implementation is emphatically NOT a security feature, so a user can remove the poisoning if they wish. We simply implement it in such a way as to provide the least surprising behaviour. An extensive set of self-tests are provided which ensure behaviour is as expected and additionally self-documents expected behaviour of poisoned ranges. Suggested-by: Vlastimil Babka <vbabka(a)suze.cz> Suggested-by: Jann Horn <jannh(a)google.com> Suggested-by: David Hildenbrand <david(a)redhat.com> v1 * Un-RFC'd as appears no major objections to approach but rather debate on implementation. * Fixed issue with arches which need mmu_context.h and tlbfush.h. header imports in pagewalker logic to be able to use update_mmu_cache() as reported by the kernel test bot. * Added comments in page walker logic to clarify who can use ops->install_pte and why as well as adding a check_ops_valid() helper function, as suggested by Christoph. * Pass false in full parameter in pte_clear_not_present_full() as suggested by Jann. * Stopped erroneously requiring a write lock for the poison operation as suggested by Jann and Suren. * Moved anon_vma_prepare() to the start of madvise_guard_poison() to be consistent with how this is used elsewhere in the kernel as suggested by Jann. * Avoid returning -EAGAIN if we are raced on page faults, just keep looping and duck out if a fatal signal is pending or a conditional reschedule is needed, as suggested by Jann. * Avoid needlessly splitting huge PUDs and PMDs by specifying ACTION_CONTINUE, as suggested by Jann. RFC https://lore.kernel.org/all/cover.1727440966.git.lorenzo.stoakes@oracle.com/ Lorenzo Stoakes (4): mm: pagewalk: add the ability to install PTEs mm: add PTE_MARKER_GUARD PTE marker mm: madvise: implement lightweight guard page mechanism selftests/mm: add self tests for guard page feature arch/alpha/include/uapi/asm/mman.h | 3 + arch/mips/include/uapi/asm/mman.h | 3 + arch/parisc/include/uapi/asm/mman.h | 3 + arch/xtensa/include/uapi/asm/mman.h | 3 + include/linux/mm_inline.h | 2 +- include/linux/pagewalk.h | 18 +- include/linux/swapops.h | 26 +- include/uapi/asm-generic/mman-common.h | 3 + mm/hugetlb.c | 3 + mm/internal.h | 6 + mm/madvise.c | 168 ++++ mm/memory.c | 18 +- mm/mprotect.c | 3 +- mm/mseal.c | 1 + mm/pagewalk.c | 200 ++-- tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/guard-pages.c | 1168 ++++++++++++++++++++++ 18 files changed, 1564 insertions(+), 66 deletions(-) create mode 100644 tools/testing/selftests/mm/guard-pages.c -- 2.46.2

1 year

3
15
0 0

[PATCH 0/3] selftests/mm: revert pthread_barrier change and

by Edward Liaw

On Android arm, pthread_create followed by a fork caused a deadlock in the case where the fork required work to be completed by the created thread. The previous patches incorrectly assumed that the parent would always initialize the pthread_barrier for the child thread. This reverts the change and replaces the fix for wp-fork-with-event with the original use of atomic_bool. Edward Liaw (3): Revert "selftests/mm: fix deadlock for fork after pthread_create on ARM" Revert "selftests/mm: replace atomic_bool with pthread_barrier_t" selftests/mm: fix deadlock for fork after pthread_create with atomic_bool tools/testing/selftests/mm/uffd-common.c | 5 ++-- tools/testing/selftests/mm/uffd-common.h | 3 ++- tools/testing/selftests/mm/uffd-unit-tests.c | 24 ++++++++------------ 3 files changed, 14 insertions(+), 18 deletions(-) -- 2.47.0.105.g07ac214952-goog

1 year

2
4
0 0

[PATCH V3 00/15] selftests/resctrl: Support diverse platforms with MBM and MBA tests

by Reinette Chatre

Changes since V2: - V2: https://lore.kernel.org/all/cover.1726164080.git.reinette.chatre@intel.com/ - Add fix to protect against buffer overflow when parsing text from sysfs files. - Add cleanup patch to address use of magic constants as pointed out by Ilpo. - Add Reviewed-by tags where received, except for "selftests/resctrl: Use cache size to determine "fill_buf" buffer size" that changed too much since receiving the Reviewed-by tag. - Please see individual patches for detailed changes. Changes since V1: - V1: https://lore.kernel.org/cover.1724970211.git.reinette.chatre@intel.com/ - V2 contains the same general solutions to stated problem as V1 but these are now preceded by more fixes (patches 1 to 5) and improved robustness (patches 6 to 9) to existing tests before the series gets back to solving the original problem with more confidence in patches 10 to 13. - The posibility of making "memflush = false" for CMT test was discussed during V1. Modifying this setting does not have a significant impact on the observed results that are already well within acceptable range and this version thus keeps original default. If performance was a goal it may be possible to do further experimentation where "memflush = false" could eliminate the need for the sleep(1) within the test wrapper, but improving the performance is not a goal of this work. - (New) Support what seems to be unintended ability for user space to provide parameters to "fill_buf" by making the parsing robust and only support changing parameters that are supported to be changed. Drop support for "write" operation since it has never been measured. - (New) Improve wraparound handling. (Ilpo) - (New) A couple of new fixes addressing issues discovered during development. - (Change from V1) To support fill_buf parameters provided by user space as well as test specific fill_buf parameters struct fill_buf_param is no longer just a member of struct resctrl_val_param, instead there could be at most two instances of struct fill_buf_param, the immutable parameters provided by user space and the parameters used by individual tests. (Ilpo) - Please see individual patches for detailed changes. V1 cover: The resctrl selftests for Memory Bandwidth Allocation (MBA) and Memory Bandwidth Monitoring (MBM) are failing on some (for example [1]) Emerald Rapids systems. The test failures result from the following two properties of these systems: 1) Emerald Rapids systems can have up to 320MB L3 cache. The resctrl MBA and MBM selftests measure memory traffic for which a hardcoded 250MB buffer has been sufficient so far. On platforms with L3 cache larger than the buffer, the buffer fits in the L3 cache and thus no/very little memory traffic is generated during the "memory bandwidth" tests. 2) Some platform features, for example RAS features or memory performance features that generate memory traffic may drive accesses that are counted differently by performance counters and MBM respectively, for instance generating "overhead" traffic which is not counted against any specific RMID. Until now these counting differences have always been "in the noise". On Emerald Rapids systems the maximum MBA throttling (10% memory bandwidth) throttles memory bandwidth to where memory accesses by these other platform features push the memory bandwidth difference between memory controller performance counters and resctrl (MBM) beyond the tests' hardcoded tolerance. Make the tests more robust against platform variations: 1) Let the buffer used by memory bandwidth tests be guided by the size of the L3 cache. 2) Larger buffers require longer initialization time before the buffer can be used to measurement. Rework the tests to ensure that buffer initialization is complete before measurements start. 3) Do not compare performance counters and MBM measurements at low bandwidth. The value of "low" is hardcoded to 750MiB based on measurements on Emerald Rapids, Sapphire Rapids, and Ice Lake systems. This limit is not applicable to AMD systems since it only applies to the MBA and MBM tests that are isolated to Intel. [1] https://ark.intel.com/content/www/us/en/ark/products/237261/intel-xeon-plat… Reinette Chatre (15): selftests/resctrl: Make functions only used in same file static selftests/resctrl: Print accurate buffer size as part of MBM results selftests/resctrl: Fix memory overflow due to unhandled wraparound selftests/resctrl: Protect against array overrun during iMC config parsing selftests/resctrl: Protect against array overflow when reading strings selftests/resctrl: Make wraparound handling obvious selftests/resctrl: Remove "once" parameter required to be false selftests/resctrl: Only support measured read operation selftests/resctrl: Remove unused measurement code selftests/resctrl: Make benchmark parameter passing robust selftests/resctrl: Ensure measurements skip initialization of default benchmark selftests/resctrl: Use cache size to determine "fill_buf" buffer size selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth selftests/resctrl: Keep results from first test run selftests/resctrl: Replace magic constants used as array size tools/testing/selftests/resctrl/cmt_test.c | 37 +- tools/testing/selftests/resctrl/fill_buf.c | 45 +- tools/testing/selftests/resctrl/mba_test.c | 54 ++- tools/testing/selftests/resctrl/mbm_test.c | 37 +- tools/testing/selftests/resctrl/resctrl.h | 79 +++- .../testing/selftests/resctrl/resctrl_tests.c | 95 +++- tools/testing/selftests/resctrl/resctrl_val.c | 447 +++++------------- tools/testing/selftests/resctrl/resctrlfs.c | 19 +- 8 files changed, 354 insertions(+), 459 deletions(-) -- 2.46.2

1 year

2
24
0 0

[PATCH 0/2] selftests/mm: fix deadlock after pthread_create

by Edward Liaw

On Android arm, pthread_create followed by a fork caused a deadlock in the case where the fork required work to be completed by the created thread. Updated the synchronization primitive to use pthread_barrier instead of atomic_bool. Applied the same fix to the wp-fork-with-event test. Edward Liaw (2): selftests/mm: replace atomic_bool with pthread_barrier_t selftests/mm: fix deadlock for fork after pthread_create on ARM tools/testing/selftests/mm/uffd-common.c | 5 +++-- tools/testing/selftests/mm/uffd-common.h | 3 +-- tools/testing/selftests/mm/uffd-unit-tests.c | 21 ++++++++++++++------ 3 files changed, 19 insertions(+), 10 deletions(-) -- 2.46.1.824.gd892dcdcdd-goog

1 year

4
6
0 0

[PATCH] kunit: tool: catch warnings generated by the kernel

by Jason Gunthorpe

If the kunit being run generates a WARN for some reason kunit.py ignores it and declares the tested PASSED. This is very much not desirable, as tests that are hitting WARN's are probably actually failing. Take the simple approach to reducing this by setting panic_on_warn when running the kernel. The kernel crashes and kunit.py shows the WARN and reports the test fails. Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> --- tools/testing/kunit/kunit_kernel.py | 2 ++ 1 file changed, 2 insertions(+) I saw there was an earlier series working to make tests that deliberately made WARNs not do that, so this would be consistent with that idea, tests should not make WARNs, and WARNs should not be ignored.. diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 61931c4926fd66..7a4228568dd73c 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -342,6 +342,8 @@ class LinuxSourceTree: if filter_action: args.append('kunit.filter_action=' + filter_action) args.append('kunit.enable=1') + args.append('panic_on_warn=1') + args.append('panic=-1') process = self._ops.start(args, build_dir) assert process.stdout is not None # tell mypy it's set base-commit: 2872987b1d009df556c0061ecdeede6a5f9bf42c -- 2.46.2

1 year

1
0
0 0

[PATCH 0/2] selftest: rtc: Add rtc feature detection and rtc file check

by Joseph Jang

1. In order to make rtctest more explicit and robust, we propose to use RTC_PARAM_GET ioctl interface to check rtc alarm feature state before running alarm related tests. 2. The rtctest requires the read permission on /dev/rtc0. The rtctest will be skipped if the /dev/rtc0 is not readable. Joseph Jang (2): selftest: rtc: Add to check rtc alarm status for alarm related test selftest: rtc: Check if could access /dev/rtc0 before testing tools/testing/selftests/rtc/Makefile | 2 +- tools/testing/selftests/rtc/rtctest.c | 71 ++++++++++++++++++++++++++- 2 files changed, 71 insertions(+), 2 deletions(-) -- 2.34.1

1 year

3
15
0 0

[PATCH v9 9/9] selftests/pcie_bwctrl: Create selftests

by Ilpo Järvinen

Create selftests for PCIe BW control through the PCIe cooling device sysfs interface. First, the BW control selftest finds the PCIe Port to test with. By default, the PCIe Port with the highest Link Speed is selected but another PCIe Port can be provided with -d parameter. The actual test steps the cur_state of the cooling device one-by-one from max_state to what the cur_state was initially. The speed change is confirmed by observing the current_link_speed for the corresponding PCIe Port. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/pcie_bwctrl/Makefile | 2 + .../pcie_bwctrl/set_pcie_cooling_state.sh | 122 ++++++++++++++++++ .../selftests/pcie_bwctrl/set_pcie_speed.sh | 67 ++++++++++ 5 files changed, 193 insertions(+) create mode 100644 tools/testing/selftests/pcie_bwctrl/Makefile create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh diff --git a/MAINTAINERS b/MAINTAINERS index 393ed7ce5ea1..d7ffef4382df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17940,6 +17940,7 @@ S: Supported F: drivers/pci/pcie/bwctrl.c F: drivers/thermal/pcie_cooling.c F: include/linux/pci-bwctrl.h +F: tools/testing/selftests/pcie_bwctrl/ PCIE DRIVER FOR AMAZON ANNAPURNA LABS M: Jonathan Chocron <jonnyc(a)amazon.com> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index b38199965f99..7181756f47ff 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -72,6 +72,7 @@ TARGETS += net/packetdrill TARGETS += net/rds TARGETS += net/tcp_ao TARGETS += nsfs +TARGETS += pcie_bwctrl TARGETS += perf_events TARGETS += pidfd TARGETS += pid_namespace diff --git a/tools/testing/selftests/pcie_bwctrl/Makefile b/tools/testing/selftests/pcie_bwctrl/Makefile new file mode 100644 index 000000000000..3e84e26341d1 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/Makefile @@ -0,0 +1,2 @@ +TEST_PROGS = set_pcie_cooling_state.sh +include ../lib.mk diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh new file mode 100755 index 000000000000..9df606552af3 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + +SYSFS= +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +retval=0 +skipmsg="skip all tests:" + +PCIEPORTTYPE="PCIe_Port_Link_Speed" + +prerequisite() +{ + local ports + + if [ $UID != 0 ]; then + echo $skipmsg must be run as root >&2 + exit $ksft_skip + fi + + SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` + + if [ ! -d "$SYSFS" ]; then + echo $skipmsg sysfs is not mounted >&2 + exit $ksft_skip + fi + + if ! ls $SYSFS/class/thermal/cooling_device* > /dev/null 2>&1; then + echo $skipmsg thermal cooling devices missing >&2 + exit $ksft_skip + fi + + ports=`grep -e "^$PCIEPORTTYPE" $SYSFS/class/thermal/cooling_device*/type | wc -l` + if [ $ports -eq 0 ]; then + echo $skipmsg pcie cooling devices missing >&2 + exit $ksft_skip + fi +} + +testport= +find_pcie_port() +{ + local patt="$1" + local pcieports + local max + local cur + local delta + local bestdelta=-1 + + pcieports=`grep -l -F -e "$patt" /sys/class/thermal/cooling_device*/type` + if [ -z "$pcieports" ]; then + return + fi + pcieports=${pcieports//\/type/} + # Find the port with the highest PCIe Link Speed + for port in $pcieports; do + max=`cat $port/max_state` + cur=`cat $port/cur_state` + delta=$((max-cur)) + if [ $delta -gt $bestdelta ]; then + testport="$port" + bestdelta=$delta + fi + done +} + +sysfspcidev= +find_sysfs_pci_dev() +{ + local typefile="$1/type" + local pcidir + + pcidir="$SYSFS/bus/pci/devices/`sed -e "s|^${PCIEPORTTYPE}_||g" $typefile`" + + if [ -r "$pcidir/current_link_speed" ]; then + sysfspcidev="$pcidir/current_link_speed" + fi +} + +usage() +{ + echo "Usage $0 [ -d dev ]" + echo -e "\t-d: PCIe port BDF string (e.g., 0000:00:04.0)" +} + +pattern="$PCIEPORTTYPE" +parse_arguments() +{ + while getopts d:h opt; do + case $opt in + h) + usage "$0" + exit 0 + ;; + d) + pattern="$PCIEPORTTYPE_$OPTARG" + ;; + *) + usage "$0" + exit 0 + ;; + esac + done +} + +parse_arguments "$@" +prerequisite +find_pcie_port "$pattern" +if [ -z "$testport" ]; then + echo $skipmsg "pcie cooling device not found from sysfs" >&2 + exit $ksft_skip +fi +find_sysfs_pci_dev "$testport" +if [ -z "$sysfspcidev" ]; then + echo $skipmsg "PCIe port device not found from sysfs" >&2 + exit $ksft_skip +fi + +./set_pcie_speed.sh "$testport" "$sysfspcidev" +retval=$? + +exit $retval diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh new file mode 100755 index 000000000000..584596949312 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh @@ -0,0 +1,67 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + +set -e + +TESTNAME=set_pcie_speed + +declare -a PCIELINKSPEED=( + "2.5 GT/s PCIe" + "5.0 GT/s PCIe" + "8.0 GT/s PCIe" + "16.0 GT/s PCIe" + "32.0 GT/s PCIe" + "64.0 GT/s PCIe" +) + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +retval=0 + +coolingdev="$1" +statefile="$coolingdev/cur_state" +maxfile="$coolingdev/max_state" +linkspeedfile="$2" + +oldstate=`cat $statefile` +maxstate=`cat $maxfile` + +set_state() +{ + local state=$1 + local linkspeed + local expected_linkspeed + + echo $state > $statefile + + sleep 1 + + linkspeed="`cat $linkspeedfile`" + expected_linkspeed=$((maxstate-state)) + expected_str="${PCIELINKSPEED[$expected_linkspeed]}" + if [ ! "${expected_str}" = "${linkspeed}" ]; then + echo "$TESTNAME failed: expected: ${expected_str}; got ${linkspeed}" + retval=1 + fi +} + +cleanup_skip () +{ + set_state $oldstate + exit $ksft_skip +} + +trap cleanup_skip EXIT + +echo "$TESTNAME: testing states $maxstate .. $oldstate with $coolingdev" +for i in $(seq $maxstate -1 $oldstate); do + set_state "$i" +done + +trap EXIT +if [ $retval -eq 0 ]; then + echo "$TESTNAME [PASS]" +else + echo "$TESTNAME [FAIL]" +fi +exit $retval -- 2.39.5

1 year

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror