- Linux-kselftest-mirror - lists.linaro.org

[PATCH net] selftests: mptcp: connect: -f: no reconnect

by Matthieu Baerts (NGI0)

The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE by closing the connection with unread bytes in the receive queue. The xdisconnect() helper was used to stop the connection, but it does more than that: it will shut it down, then wait before reconnecting to the same address. This causes the mptcp_join's "fastclose test" to fail all the time. This failure is due to a recent change, with commit 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect"), but that went unnoticed because the test is currently ignored. The recent modification only shown an existing issue: xdisconnect() doesn't need to be used here, only the shutdown() part is needed. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - The failure was not clearly visible on NIPA, because the results for the two impacted sub-tests are currently ignored (unstable). Still, it looks important to fix that, as this will help when the tests will be improved not to be unstable any more. --- tools/testing/selftests/net/mptcp/mptcp_connect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index 414addef9a4514c489ecd09249143fe0ce2af649..d240d02fa443a1cd802f0e705ab36db5c22063a8 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -1302,7 +1302,7 @@ int main_loop(void) return ret; if (cfg_truncate > 0) { - xdisconnect(fd); + shutdown(fd, SHUT_WR); } else if (--cfg_repeat > 0) { xdisconnect(fd); --- base-commit: 4241a702e0d0c2ca9364cfac08dbf134264962de change-id: 20250204-net-mptcp-sft-conn-f-d1c14274ba66 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

7 months, 1 week

2
1
0 0

[PATCH] selftests/dma: Fix bad array reference.

by Liu Ye

dir[directions] should be directions[dir] to correctly index the directions array. Signed-off-by: Liu Ye <liuye(a)kylinos.cn> --- tools/testing/selftests/dma/dma_map_benchmark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index b12f1f9babf8..b925756373ce 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -118,7 +118,7 @@ int main(int argc, char **argv) } printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s granule: %d\n", - threads, seconds, node, dir[directions], granule); + threads, seconds, node, directions[dir], granule); printf("average map latency(us):%.1f standard deviation:%.1f\n", map.avg_map_100ns/10.0, map.map_stddev/10.0); printf("average unmap latency(us):%.1f standard deviation:%.1f\n", -- 2.25.1

7 months, 1 week

1
0
0 0

[PATCH] selftests: bpf: Support dynamic linking LLVM if static not available

by Daniel Xu

Since 67ab80a01886 ("selftests/bpf: Prefer static linking for LLVM libraries"), only statically linking test_progs is supported. However, some distros only provide a dynamically linkable LLVM. This commit adds a fallback for dynamically linking LLVM if static linking is not available. If both options are available, static linking is chosen. Signed-off-by: Daniel Xu <dxu(a)dxuuu.xyz> --- tools/testing/selftests/bpf/Makefile | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 6722080b2107..da514030a153 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -184,9 +184,14 @@ ifeq ($(feature-llvm),1) LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets # both llvm-config and lib.mk add -D_GNU_SOURCE, which ends up as conflict LLVM_CFLAGS += $(filter-out -D_GNU_SOURCE,$(shell $(LLVM_CONFIG) --cflags)) - LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --libs $(LLVM_CONFIG_LIB_COMPONENTS)) - LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --system-libs $(LLVM_CONFIG_LIB_COMPONENTS)) - LLVM_LDLIBS += -lstdc++ + # Prefer linking statically if it's available, otherwise fallback to shared + ifeq ($(shell $(LLVM_CONFIG) --link-static --libs &> /dev/null && echo static),static) + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --system-libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LLVM_LDLIBS += -lstdc++ + else + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-shared --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + endif LLVM_LDFLAGS += $(shell $(LLVM_CONFIG) --ldflags) endif -- 2.47.1

7 months, 1 week

5
7
0 0

[PATCH] selftests: pidfd: Fix compiling errors and warning

by I Hsin Cheng

When compiling selftests files under tools/testing/selftests/pidfd/ , some compiling errors and warnings will pop out as the following. CC pidfd_fdinfo_test pidfd_fdinfo_test.c: In function ‘child_fdinfo_nspid_test’: pidfd_fdinfo_test.c:231:13: warning: implicit declaration of function \ ‘mount’ [-Wimplicit-function-declaration] 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~ pidfd_fdinfo_test.c:231:36: error: ‘MS_REC’ undeclared \ (first use in this function) 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~~ pidfd_fdinfo_test.c:231:36: note: each undeclared identifier is \ reported only once for each function it appears in pidfd_fdinfo_test.c:231:45: error: ‘MS_PRIVATE’ undeclared \ (first use in this function); did you mean ‘MAP_PRIVATE’? 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~~~~~~ | MAP_PRIVATE pidfd_fdinfo_test.c:237:15: warning: implicit declaration of function \ ‘umount2’; did you mean ‘SYS_umount2’? \ [-Wimplicit-function-declaration] 237 | (void)umount2("/proc", MNT_DETACH); | ^~~~~~~ | SYS_umount2 pidfd_fdinfo_test.c:237:32: error: ‘MNT_DETACH’ undeclared \ (first use in this function) 237 | (void)umount2("/proc", MNT_DETACH); | ^~~~~~~~~~ make: *** [../lib.mk:222: \ ~/linux/tools/testing/selftests/pidfd/pidfd_fdinfo_test] Error 1 Solve these errors and warnings by including header file <sys/mount.h>. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- tools/testing/selftests/pidfd/pidfd_fdinfo_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index f062a986e..f718aac75 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -13,6 +13,7 @@ #include <syscall.h> #include <sys/wait.h> #include <sys/mman.h> +#include <sys/mount.h> #include "pidfd.h" #include "../kselftest.h" -- 2.43.0

7 months, 1 week

2
2
0 0

[PATCH 6.13 580/623] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

7 months, 1 week

1
0
0 0

[PATCH 6.12 546/590] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

7 months, 1 week

1
0
0 0

[PATCH 6.6 372/393] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 ++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 +++++++- 2 files changed, 33 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 5b9772cdf265..f6156790c3b4 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index 4e217b620e0c..062d10925a10 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size; -- 2.48.1

7 months, 1 week

1
0
0 0

[PATCH net-next v3 00/10] Some pktgen fixes/improvments

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Regards, Peter Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (10): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing selftest: net: add proc_net_pktgen net/core/pktgen.c | 257 ++++--- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 650 ++++++++++++++++++ 4 files changed, 819 insertions(+), 90 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

7 months, 1 week

3
23
0 0

[PATCH] selftests/mm: Fix thuge-gen test name uniqueness

by Mark Brown

The thuge-gen test_mmap() and test_shmget() tests are repeatedly run for a variety of sizes but always report the result of their test with the same name, meaning that automated sysetms running the tests are unable to distinguish between the various tests. Add the supplied sizes to the logged test names to distinguish between runs. Fixes: b38bd9b2c448 ("selftests/mm: thuge-gen: conform to TAP format output") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/mm/thuge-gen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/thuge-gen.c b/tools/testing/selftests/mm/thuge-gen.c index e4370b79b62ffb133056eb843cdd1eaeba6503df..cd5174d735be405220d99ae796a3768f53df6ea4 100644 --- a/tools/testing/selftests/mm/thuge-gen.c +++ b/tools/testing/selftests/mm/thuge-gen.c @@ -127,7 +127,7 @@ void test_mmap(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s mmap\n", __func__); + "%s mmap %lu\n", __func__, size); if (munmap(map, size * NUM_PAGES)) ksft_exit_fail_msg("%s: unmap %s\n", __func__, strerror(errno)); @@ -165,7 +165,7 @@ void test_shmget(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s: mmap\n", __func__); + "%s: mmap %lu\n", __func__, size); if (shmdt(map)) ksft_exit_fail_msg("%s: shmdt: %s\n", __func__, strerror(errno)); } --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250204-kselftest-mm-fix-dups-076a48577184 Best regards, -- Mark Brown <broonie(a)kernel.org>

7 months, 1 week

3
3
0 0

[PATCH] selftests: pidfd: Fix compiling warning of pidfs_setns

by I Hsin Cheng

In the compilation of pidfs_setns_test.c , a warning as the following will pop out. pidfd_setns_test.c: In function ‘current_nsset_setup’: pidfd_setns_test.c:173:54: warning: implicit declaration of function \ ‘ioctl’ [-Wimplicit-function-declaration] 173 | self->child_pidfd_derived_nsfds[i] = \ ioctl(self->pidfd, info->pidfd_ioctl, 0); It's caused by wrong import of header file <linux/ioctl.h>, fix it to <sys/ioctl.h>. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- tools/testing/selftests/pidfd/pidfd_setns_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/pidfd/pidfd_setns_test.c b/tools/testing/selftests/pidfd/pidfd_setns_test.c index 7c2a43491..3ed42f1eb 100644 --- a/tools/testing/selftests/pidfd/pidfd_setns_test.c +++ b/tools/testing/selftests/pidfd/pidfd_setns_test.c @@ -16,7 +16,7 @@ #include <unistd.h> #include <sys/socket.h> #include <sys/stat.h> -#include <linux/ioctl.h> +#include <sys/ioctl.h> #include "pidfd.h" #include "../clone3/clone3_selftests.h" -- 2.43.0

7 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror