- Linux-kselftest-mirror - lists.linaro.org

[PATCH] selftests : netfilter: Wrote a error and exit code for a command which needed veth kernel module.

by Jeffrin Jose T

A test for the basic NAT functionality uses ip command which needs veth device.There is a condition where the kernel support for veth is not compiled into the kernel and the test script breaks.This patch contains code for reasonable error display and correct code exit. Signed-off-by: Jeffrin Jose T <jeffrin(a)rajagiritech.edu.in> --- tools/testing/selftests/netfilter/nft_nat.sh | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 8ec76681605c..f25f72a75cf3 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -23,7 +23,11 @@ ip netns add ns0 ip netns add ns1 ip netns add ns2 -ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 ip -net ns0 link set lo up -- 2.20.1

6 years, 3 months

1
0
0 0

[PATCH v3 0/7] lib/string: Add strscpy_pad() function

by Tobin C. Harding

Hi, strscpy_pad() patch set now with added test shenanigans. This version adds 5 initial patches to the set and splits the single patch from v2 into two separate patches (6 and 7). While doing the testing for strscpy_pad() it was noticed that there is duplication in how test modules are being fed to kselftest and also in the test modules themselves. This set makes an attempt at adding a framework to kselftest for writing kernel test modules. It also adds a script for use in creating script test runners for kselftest. My macro-foo is not great, all criticism and suggestions very much appreciated. The design is based on test modules lib/test_printf.c, lib/test_bitmap.c, lib/test_xarray.c. Shua, I'm by no means a kselftest expert, if this approach does not fit in with your general direction please say so. Kees, I put the strscpy_pad() addition patch separate so if this goes in through Shua's tree (and if it goes in at all) its a single patch to grab if we want to start playing around with strscpy_pad(). Patch 1 fixes module unload for lib/test_printf in preparation for the rest of the series. Patch 2 Adds a shell script that can be used to create shell script test runners. Patch 3 Converts current shell script runners in tools/testing/selftests/lib/ to use the script introduced in patch 2. Patch 4 Adds the test framework by way of a header file (inc. documentation) Patch 5 Converts a couple of current test modules to make some use of the newly added test framework. Patch 6 Adds strscpy_pad() Patch 7 Adds test module for strscpy_pad() using the new framework and script. If you are a testing geek and you would like to play with this; if you are already running a kernel built recently from your tree you may want to just apply the first 5 patches then you don't need to build/boot a new kernel, just config and build the lib/ test modules (test_printf etc.) and then: sudo make TARGETS=lib kselftest Late in the development of this I found that a bunch of boiler plate had to be added to the script to handle running tests with: make O=/path/to/kout kselftest The reason is that during the build we are in the output directory but the script is in the source directory. I get the feeling that a better understanding of how the kernel build process works would provide a better solution to this. The current solution is disappointing since removing duplication and boiler plate was the point of the whole exercise. I'd love a better way to solve this? One final interesting note: there are 36 test modules in lib/ only 3 of them are run by kselftest from tools/testing/selfests/lib? Thanks for looking at this, Tobin. Tobin C. Harding (7): lib/test_printf: Add empty module_exit function kselftest: Add test runner creation script kselftest/lib: Use new shell runner to define tests kselftest: Add test module framework header lib: Use new kselftest header lib/string: Add strscpy_pad() function lib: Add test module for strscpy_pad Documentation/dev-tools/kselftest.rst | 108 ++++++++++++- include/linux/string.h | 4 + lib/Kconfig.debug | 3 + lib/Makefile | 1 + lib/string.c | 47 +++++- lib/test_bitmap.c | 20 +-- lib/test_printf.c | 17 +-- lib/test_strscpy.c | 150 +++++++++++++++++++ tools/testing/selftests/kselftest_module.h | 48 ++++++ tools/testing/selftests/kselftest_module.sh | 75 ++++++++++ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/bitmap.sh | 25 ++-- tools/testing/selftests/lib/config | 1 + tools/testing/selftests/lib/prime_numbers.sh | 23 ++- tools/testing/selftests/lib/printf.sh | 25 ++-- tools/testing/selftests/lib/strscpy.sh | 17 +++ 16 files changed, 490 insertions(+), 76 deletions(-) create mode 100644 lib/test_strscpy.c create mode 100644 tools/testing/selftests/kselftest_module.h create mode 100755 tools/testing/selftests/kselftest_module.sh create mode 100755 tools/testing/selftests/lib/strscpy.sh -- 2.20.1

6 years, 3 months

5
26
0 0

next-20190404 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc3 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 61de49cb596710b918f7a80839f0b6de2017bc32 git describe: next-20190404 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190404 Regressions (compared to build next-20190403) ------------------------------------------------------------------------ juno-r2 - arm64: kselftest: * bpf_test_sock_addr.sh qemu_arm64: kselftest: * bpf_test_sock_addr.sh * bpf_test_sockmap x86_64: kselftest-vsyscall-mode-native: * bpf_test_sockmap kselftest-vsyscall-mode-none: * bpf_test_sockmap * net_fib-onlink-tests.sh x86_64: kselftest-vsyscall-mode-native: * bpf_test_sockmap kselftest-vsyscall-mode-none: * bpf_test_sockmap * net_fib-onlink-tests.sh Fixes (compared to build next-20190403) ------------------------------------------------------------------------ x86_64: kselftest-vsyscall-mode-native: * bpf_test_select_reuseport kselftest-vsyscall-mode-none: * bpf_test_select_reuseport * bpf_test_sock_addr.sh x86_64: kselftest-vsyscall-mode-native: * bpf_test_select_reuseport kselftest-vsyscall-mode-none: * bpf_test_select_reuseport * bpf_test_sock_addr.sh In total: ------------------------------------------------------------------------ Ran 1625 total tests in the following environments and test suites. pass 1063 fail 356 xfail 0 skip 206 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_fsgsbase_64 qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_syscall_arg_fault_32 qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests dragonboard-410c: qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests x86: * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/cgroup_test_core * kselftest-vsyscall-mode-none/dma-buf_udmabuf * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh juno-r2: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

[PATCH v2 1/2] Provide in-kernel headers for making it easy to extend the kernel

by Joel Fernandes (Google)

Introduce in-kernel headers and other artifacts which are made available as an archive through proc (/proc/kheaders.txz file). This archive makes it possible to build kernel modules, run eBPF programs, and other tracing programs that need to extend the kernel for tracing purposes without any dependency on the file system having headers and build artifacts. On Android and embedded systems, it is common to switch kernels but not have kernel headers available on the file system. Raw kernel headers also cannot be copied into the filesystem like they can be on other distros, due to licensing and other issues. There's no linux-headers package on Android. Further once a different kernel is booted, any headers stored on the file system will no longer be useful. By storing the headers as a compressed archive within the kernel, we can avoid these issues that have been a hindrance for a long time. The feature is also buildable as a module just in case the user desires it not being part of the kernel image. This makes it possible to load and unload the headers on demand. A tracing program, or a kernel module builder can load the module, do its operations, and then unload the module to save kernel memory. The total memory needed is 3.8MB. The code to read the headers is based on /proc/config.gz code and uses the same technique to embed the headers. To build a module, the below steps have been tested on an x86 machine: modprobe kheaders rm -rf $HOME/headers mkdir -p $HOME/headers tar -xvf /proc/kheaders.txz -C $HOME/headers >/dev/null cd my-kernel-module make -C $HOME/headers M=$(pwd) modules rmmod kheaders Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- Changes since v1: - removed IKH_EXTRA variable, not needed (Masahiro Yamada) - small fix ups to selftest - added target to main Makefile etc - added MODULE_LICENSE to test module - made selftest more quiet Changes since RFC: Both changes bring size down to 3.8MB: - use xz for compression - strip comments except SPDX lines - Call out the module name in Kconfig - Also added selftests in second patch to ensure headers are always working. Documentation/dontdiff | 1 + init/Kconfig | 11 ++++++ kernel/.gitignore | 2 ++ kernel/Makefile | 27 ++++++++++++++ kernel/kheaders.c | 74 +++++++++++++++++++++++++++++++++++++++ scripts/gen_ikh_data.sh | 19 ++++++++++ scripts/strip-comments.pl | 8 +++++ 7 files changed, 142 insertions(+) create mode 100644 kernel/kheaders.c create mode 100755 scripts/gen_ikh_data.sh create mode 100755 scripts/strip-comments.pl diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 2228fcc8e29f..05a2319ee2a2 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -151,6 +151,7 @@ int8.c kallsyms kconfig keywords.c +kheaders_data.h* ksym.c* ksym.h* kxgettext diff --git a/init/Kconfig b/init/Kconfig index c9386a365eea..9fbf4f73d98c 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -563,6 +563,17 @@ config IKCONFIG_PROC This option enables access to the kernel configuration file through /proc/config.gz. +config IKHEADERS_PROC + tristate "Enable kernel header artifacts through /proc/kheaders.txz" + select BUILD_BIN2C + depends on PROC_FS + help + This option enables access to the kernel header and other artifacts that + are generated during the build process. These can be used to build kernel + modules, and other in-kernel programs such as those generated by eBPF + and systemtap tools. If you build the headers as a module, a module + called kheaders.ko is built which can be loaded to get access to them. + config LOG_BUF_SHIFT int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" range 12 25 diff --git a/kernel/.gitignore b/kernel/.gitignore index b3097bde4e9c..6acf71acbdcb 100644 --- a/kernel/.gitignore +++ b/kernel/.gitignore @@ -3,5 +3,7 @@ # config_data.h config_data.gz +kheaders_data.h +kheaders_data.txz timeconst.h hz.bc diff --git a/kernel/Makefile b/kernel/Makefile index 6aa7543bcdb2..1d13a7a6c537 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_UTS_NS) += utsname.o obj-$(CONFIG_USER_NS) += user_namespace.o obj-$(CONFIG_PID_NS) += pid_namespace.o obj-$(CONFIG_IKCONFIG) += configs.o +obj-$(CONFIG_IKHEADERS_PROC) += kheaders.o obj-$(CONFIG_SMP) += stop_machine.o obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o obj-$(CONFIG_AUDIT) += audit.o auditfilter.o @@ -130,3 +131,29 @@ filechk_ikconfiggz = \ targets += config_data.h $(obj)/config_data.h: $(obj)/config_data.gz FORCE $(call filechk,ikconfiggz) + +# Build a list of in-kernel headers for building kernel modules +ikh_file_list := include/ +ikh_file_list += arch/$(ARCH)/Makefile +ikh_file_list += arch/$(ARCH)/include/ +ikh_file_list += scripts/ +ikh_file_list += Makefile +ikh_file_list += Module.symvers +ifeq ($(CONFIG_STACK_VALIDATION), y) +ikh_file_list += $(objtree)/tools/objtool/objtool +endif + +$(obj)/kheaders.o: $(obj)/kheaders_data.h + +targets += kheaders_data.txz + +quiet_cmd_genikh = GEN $(obj)/kheaders_data.txz +cmd_genikh = $(srctree)/scripts/gen_ikh_data.sh $@ $^ >/dev/null 2>&1 +$(obj)/kheaders_data.txz: $(ikh_file_list) FORCE + $(call cmd,genikh) + +filechk_ikheadersxz = (echo "static const char kernel_headers_data[] __used = KH_MAGIC_START"; cat $< | scripts/bin2c; echo "KH_MAGIC_END;") + +targets += kheaders_data.h +$(obj)/kheaders_data.h: $(obj)/kheaders_data.txz FORCE + $(call filechk,ikheadersxz) diff --git a/kernel/kheaders.c b/kernel/kheaders.c new file mode 100644 index 000000000000..c39930f51202 --- /dev/null +++ b/kernel/kheaders.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kernel/kheaders.c + * Provide headers and artifacts needed to build kernel modules. + * (Borrowed code from kernel/configs.c) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/uaccess.h> + +/* + * Define kernel_headers_data and kernel_headers_data_size, which contains the + * compressed kernel headers. The file is first compressed with xz and then + * bounded by two eight byte magic numbers to allow extraction from a binary + * kernel image: + * + * IKHD_ST + * <image> + * IKHD_ED + */ +#define KH_MAGIC_START "IKHD_ST" +#define KH_MAGIC_END "IKHD_ED" +#include "kheaders_data.h" + + +#define KH_MAGIC_SIZE (sizeof(KH_MAGIC_START) - 1) +#define kernel_headers_data_size \ + (sizeof(kernel_headers_data) - 1 - KH_MAGIC_SIZE * 2) + +static ssize_t +ikheaders_read_current(struct file *file, char __user *buf, + size_t len, loff_t *offset) +{ + return simple_read_from_buffer(buf, len, offset, + kernel_headers_data + KH_MAGIC_SIZE, + kernel_headers_data_size); +} + +static const struct file_operations ikheaders_file_ops = { + .owner = THIS_MODULE, + .read = ikheaders_read_current, + .llseek = default_llseek, +}; + +static int __init ikheaders_init(void) +{ + struct proc_dir_entry *entry; + + /* create the current headers file */ + entry = proc_create("kheaders.txz", S_IFREG | S_IRUGO, NULL, + &ikheaders_file_ops); + if (!entry) + return -ENOMEM; + + proc_set_size(entry, kernel_headers_data_size); + + return 0; +} + +static void __exit ikheaders_cleanup(void) +{ + remove_proc_entry("kheaders.txz", NULL); +} + +module_init(ikheaders_init); +module_exit(ikheaders_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Joel Fernandes"); +MODULE_DESCRIPTION("Echo the kernel header artifacts used to build the kernel"); diff --git a/scripts/gen_ikh_data.sh b/scripts/gen_ikh_data.sh new file mode 100755 index 000000000000..609196b5cea2 --- /dev/null +++ b/scripts/gen_ikh_data.sh @@ -0,0 +1,19 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +spath="$(dirname "$(readlink -f "$0")")" + +rm -rf $1.tmp +mkdir $1.tmp + +for f in "${@:2}"; + do find "$f" ! -name "*.c" ! -name "*.o" ! -name "*.cmd" ! -name ".*"; +done | cpio -pd $1.tmp + +for f in $(find $1.tmp); do + $spath/strip-comments.pl $f +done + +tar -Jcf $1 -C $1.tmp/ . > /dev/null + +rm -rf $1.tmp diff --git a/scripts/strip-comments.pl b/scripts/strip-comments.pl new file mode 100755 index 000000000000..f8ada87c5802 --- /dev/null +++ b/scripts/strip-comments.pl @@ -0,0 +1,8 @@ +#!/usr/bin/perl -pi +# SPDX-License-Identifier: GPL-2.0 + +# This script removes /**/ comments from a file, unless such comments +# contain "SPDX". It is used when building compressed in-kernel headers. + +BEGIN {undef $/;} +s/\/\*((?!SPDX).)*?\*\///smg; -- 2.20.1.791.gb4d0f1c61a-goog

6 years, 3 months

7
20
0 0

[PATCH v3.1] selftests: Clean up module testing shell script

by Kees Cook

This adjusts kselftest_module.sh to take an option "args" argument for modprobe arguments, removes bash-isms (since some system's /bin/sh may not be bash), and refactors the lib/ scripts into a shorter calling convention. Signed-off-by: Kees Cook <keescook(a)chromium.org> --- This is my suggested clean-up for the module testing script for the strscpy_pad() series... --- tools/testing/selftests/kselftest_module.sh | 24 ++++++++++++-------- tools/testing/selftests/lib/bitmap.sh | 17 +------------- tools/testing/selftests/lib/prime_numbers.sh | 17 ++------------ tools/testing/selftests/lib/printf.sh | 16 +------------ tools/testing/selftests/lib/strscpy.sh | 17 ++------------ 5 files changed, 20 insertions(+), 71 deletions(-) diff --git a/tools/testing/selftests/kselftest_module.sh b/tools/testing/selftests/kselftest_module.sh index b5d446738614..20a897d21fde 100755 --- a/tools/testing/selftests/kselftest_module.sh +++ b/tools/testing/selftests/kselftest_module.sh @@ -2,19 +2,20 @@ # SPDX-License-Identifier: GPL-2.0+ # -# Runs an individual test module. kselftest expects a separate -# executable for each test. So test should each have an individial +# Runs an individual test module. kselftest expects a separate +# executable for each test. So test should each have an individial # script that can call this script. # # Individual test scrits should define these: module="" # filename (without the .ko). desc="" # Output prefix. +args="" # modprobe arguments modprobe="/sbin/modprobe" main() { - parse_args $@ + parse_args "$@" assert_root assert_have_module run_module @@ -23,17 +24,20 @@ main() { parse_args() { script=${0##*/} - if [[ ! $# -eq 2 ]]; then - echo "Usage: $script <module_name> <description> [FAIL]" + if [ $# -lt 2 ]; then + echo "Usage: $script <description> <module_name> [FAIL]" exit 1 fi - module=$1 - desc=$2 + desc="$1" + shift || true + module="$1" + shift || true + args="$@" } assert_root() { - if [[ $EUID -ne 0 ]]; then + if [ ! -w /dev ]; then skip "please run as root" fi } @@ -45,7 +49,7 @@ assert_have_module() { } run_module() { - if $modprobe -q $module; then + if $modprobe -q $module $args; then $modprobe -q -r $module say "ok" else @@ -72,4 +76,4 @@ skip() { # # Main script # -main $@ +main "$@" diff --git a/tools/testing/selftests/lib/bitmap.sh b/tools/testing/selftests/lib/bitmap.sh index ed4180ea0021..5511dddc5c2d 100755 --- a/tools/testing/selftests/lib/bitmap.sh +++ b/tools/testing/selftests/lib/bitmap.sh @@ -1,18 +1,3 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 - -module=test_bitmap -description="bitmap" - -# -# Shouldn't need to edit anything below here. -# - -file="kselftest_module.sh" -path="../$file" -if [[ ! $KBUILD_SRC == "" ]]; then - path="${KBUILD_SRC}/tools/testing/selftests/$file" -fi - -$path $module $description - +$(dirname $0)/../kselftest_module.sh "bitmap" test_bitmap diff --git a/tools/testing/selftests/lib/prime_numbers.sh b/tools/testing/selftests/lib/prime_numbers.sh index 6f782386d897..2b6be0308a6d 100755 --- a/tools/testing/selftests/lib/prime_numbers.sh +++ b/tools/testing/selftests/lib/prime_numbers.sh @@ -1,18 +1,5 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # Checks fast/slow prime_number generation for inconsistencies - -module=prime_numbers -description="prime_numbers" - -# -# Shouldn't need to edit anything below here. -# - -file="kselftest_module.sh" -path="../$file" -if [[ ! $KBUILD_SRC == "" ]]; then - path="${KBUILD_SRC}/tools/testing/selftests/$file" -fi - -$path $module $description +$(dirname $0)/../kselftest_module.sh "prime numbers" prime_numbers \ + selftest=65536 diff --git a/tools/testing/selftests/lib/printf.sh b/tools/testing/selftests/lib/printf.sh index 89717915d028..2ffa61da0296 100755 --- a/tools/testing/selftests/lib/printf.sh +++ b/tools/testing/selftests/lib/printf.sh @@ -1,18 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # Tests the printf infrastructure using test_printf kernel module. - -module=test_printf -description="printf" - -# -# Shouldn't need to edit anything below here. -# - -file="kselftest_module.sh" -path="../$file" -if [[ ! $KBUILD_SRC == "" ]]; then - path="${KBUILD_SRC}/tools/testing/selftests/$file" -fi - -$path $module $description +$(dirname $0)/../kselftest_module.sh "printf" test_printf diff --git a/tools/testing/selftests/lib/strscpy.sh b/tools/testing/selftests/lib/strscpy.sh index f3ba4b90e602..1f26dac74896 100755 --- a/tools/testing/selftests/lib/strscpy.sh +++ b/tools/testing/selftests/lib/strscpy.sh @@ -1,17 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0+ - -module=test_strscpy -description="strscpy" - -# -# Shouldn't need to edit anything below here. -# - -file="kselftest_module.sh" -path="../$file" -if [[ ! $KBUILD_SRC == "" ]]; then - path="${KBUILD_SRC}/tools/testing/selftests/$file" -fi - -$path $module $description +# Test corner cases of the strscpy()-family of functions. +$(dirname $0)/../kselftest_module.sh "strscpy" test_strscpy -- 2.17.1 -- Kees Cook

6 years, 3 months

3
3
0 0

next-20190403 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc3 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: bf97b82f37c6d90e16de001d0659644c57fa490d git describe: next-20190403 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190403 Regressions (compared to build next-20190402) ------------------------------------------------------------------------ x86_64: kselftest: * bpf_test_sock_addr.sh * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * bpf_test_select_reuseport kselftest-vsyscall-mode-none: * bpf_test_select_reuseport * bpf_test_sock_addr.sh x86_64: kselftest: * bpf_test_sock_addr.sh * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * bpf_test_select_reuseport kselftest-vsyscall-mode-none: * bpf_test_select_reuseport * bpf_test_sock_addr.sh x86_64: kselftest: * bpf_test_sock_addr.sh * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * bpf_test_select_reuseport kselftest-vsyscall-mode-none: * bpf_test_select_reuseport * bpf_test_sock_addr.sh Fixes (compared to build next-20190402) ------------------------------------------------------------------------ qemu_arm64: kselftest: * bpf_test_sockmap qemu_x86_64: kselftest: * bpf_test_select_reuseport * bpf_test_sock_addr.sh x86_64: kselftest-vsyscall-mode-native: * bpf_test_sockmap kselftest-vsyscall-mode-none: * bpf_test_sockmap * net_fib-onlink-tests.sh x86_64: kselftest-vsyscall-mode-native: * bpf_test_sockmap kselftest-vsyscall-mode-none: * bpf_test_sockmap * net_fib-onlink-tests.sh In total: ------------------------------------------------------------------------ Ran 1593 total tests in the following environments and test suites. pass 1034 fail 358 xfail 0 skip 201 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_fsgsbase_64 qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/size_get_size * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_syscall_arg_fault_32 dragonboard-410c: x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests x86: * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_select_reuseport * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_select_reuseport * kselftest-vsyscall-mode-none/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-none/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/cgroup_test_core * kselftest-vsyscall-mode-none/dma-buf_udmabuf * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/timestamping_txtimestamp.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh juno-r2: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

next-20190402 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc3 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 05d08e2995cbe6efdb993482ee0d38a77040861a git describe: next-20190402 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190402 Regressions (compared to build next-20190401) ------------------------------------------------------------------------ x86_64: kselftest-vsyscall-mode-native: * bpf_test_sockmap Fixes (compared to build next-20190401) ------------------------------------------------------------------------ x86_64: kselftest-vsyscall-mode-native: * bpf_test_sock_addr.sh In total: ------------------------------------------------------------------------ Ran 1582 total tests in the following environments and test suites. pass 1032 fail 351 xfail 0 skip 199 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/size_get_size * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_syscall_arg_fault_32 qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_fsgsbase_64 x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests juno-r2: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh dragonboard-410c: i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test x86: * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/cgroup_test_core * kselftest-vsyscall-mode-none/dma-buf_udmabuf * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

next-20190401 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc2 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: e3ecb83ee707a3b2a4d12e19509ecbda7f793cc2 git describe: next-20190401 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190401 Regressions (compared to build next-20190329) ------------------------------------------------------------------------ x86_64: kselftest-vsyscall-mode-native: * bpf_test_sock_addr.sh Fixes (compared to build next-20190329) ------------------------------------------------------------------------ juno-r2 - arm64: kselftest: * bpf_test_sock_addr.sh qemu_arm64: kselftest: * bpf_test_sock_addr.sh x86_64: kselftest: * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * bpf_test_sockmap x86_64: kselftest: * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * bpf_test_sockmap In total: ------------------------------------------------------------------------ Ran 1431 total tests in the following environments and test suites. pass 915 fail 334 xfail 0 skip 182 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native Failures ------------------------------------------------------------------------ qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/size_get_size * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_syscall_arg_fault_32 qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh juno-r2: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/timestamping_txtimestamp.sh qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh x86: * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh dragonboard-410c: Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

[PATCH v15 6/6] selftests: media_dev_allocator api test

by Shuah Khan

Add a new test for Media Device Allocator API. Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. This test does a series of unbind/bind tests to make sure media device is released correctly when it is no longer is use and when the last driver releases the reference. Signed-off-by: Shuah Khan <shuah(a)kernel.org> --- .../media_tests/media_dev_allocator.sh | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100755 tools/testing/selftests/media_tests/media_dev_allocator.sh diff --git a/tools/testing/selftests/media_tests/media_dev_allocator.sh b/tools/testing/selftests/media_tests/media_dev_allocator.sh new file mode 100755 index 000000000000..ffe00c59a483 --- /dev/null +++ b/tools/testing/selftests/media_tests/media_dev_allocator.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Media Device Allocator API test script +# Copyright (c) 2019 Shuah Khan <shuah(a)kernel.org> + +echo "Media Device Allocator testing: unbind and bind" +echo "media driver $1 audio driver $2" + +MDRIVER=/sys/bus/usb/drivers/$1 +cd $MDRIVER +MDEV=$(ls -d *\-*) + +ADRIVER=/sys/bus/usb/drivers/$2 +cd $ADRIVER +ADEV=$(ls -d *\-*.1) + +echo "==================================" +echo "Test unbind both devices - start" +echo "Running unbind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/unbind; + +echo "Media device should still be present!" +ls -l /dev/media* + +echo "sound driver is at: $ADRIVER" +echo "Device is: $ADEV" + +echo "Running unbind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/unbind; + +echo "Media device should have been deleted!" +ls -l /dev/media* +echo "Test unbind both devices - end" + +echo "==================================" + +echo "Test bind both devices - start" +echo "Running bind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/bind; + +echo "Media device should be present!" +ls -l /dev/media* + +echo "Running bind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Test bind both devices - end" + +echo "==================================" + +echo "Test unbind $MDEV - bind $MDEV - unbind $ADEV - bind $ADEV start" + +echo "Running unbind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/unbind; + +echo "Media device should be there!" +ls -l /dev/media* + +sleep 1 + +echo "Running bind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Running unbind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/unbind; + +echo "Media device should be there!" +ls -l /dev/media* + +sleep 1 + +echo "Running bind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Test unbind $MDEV - bind $MDEV - unbind $ADEV - bind $ADEV end" +echo "==================================" -- 2.17.1

6 years, 3 months

1
0
0 0

about selftests/netfilter test related issue

by Jeffrin Thalakkottoor

hello i think the script nft_nat.sh is assuming devices eth0 and eth1 which may not be the case always. my suggestion is why not give the needed network devices as arguments to the script. iam showing related command line sessions below and error related file is attached. ---------------------------x-------------x---------------------------- $ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 70:5a:0f:b9:d8:5c brd ff:ff:ff:ff:ff:ff 3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000 link/ether 68:14:01:07:36:1f brd ff:ff:ff:ff:ff:ff $ ------------------------x-----------x--------------------------------------- $sudo ./nft_nat.sh 2> error-related.txt ERROR: ping failed SKIP: Could not add add ip6 dnat hook ERROR: canot ping ns1 from ns2 ERROR: cannot ping ns1 from ns2 with active ip masquerading ERROR: cannot ping ns1 from ns2 via ipv6 ERROR: cannot ping ns1 from ns2 ERROR: cannot ping ns1 from ns2 with active ip redirect ERROR: cannnot ping ns1 from ns2 via ipv6 ERROR: cannot ping ns1 from ns2 with active ip6 redirect -------------------------x---------------------------x------------------------------------ a file is attached which shows the contents of error-related.txt /Jeffrin -- software engineer rajagiri school of engineering and technology

6 years, 3 months

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror