- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2 bpf-next 0/4] L2 encap support for bpf_skb_adjust_room

by Alan Maguire

Extend bpf_skb_adjust_room growth to mark inner MAC header so that L2 encapsulation can be used for tc tunnels. Patch #1 extends the existing test_tc_tunnel to support UDP encapsulation; later we want to be able to test MPLS over UDP and MPLS over GRE encapsulation. Patch #2 adds the BPF_F_ADJ_ROOM_ENCAP_L2(len) macro, which allows specification of inner mac length. Other approaches were explored prior to taking this approach. Specifically, I tried automatically computing the inner mac length on the basis of the specified flags (so inner maclen for GRE/IPv4 encap is the len_diff specified to bpf_skb_adjust_room minus GRE + IPv4 header length for example). Problem with this is that we don't know for sure what form of GRE/UDP header we have; is it a full GRE header, or is it a FOU UDP header or generic UDP encap header? My fear here was we'd end up with an explosion of flags. The other approach tried was to support inner L2 header marking as a separate room adjustment, i.e. adjust for L3/L4 encap, then call bpf_skb_adjust_room for L2 encap. This can be made to work but because it imposed an order on operations, felt a bit clunky. Patch #3 syncs tools/ bpf.h. Patch #4 extends the tests again to support MPLSoverGRE, MPLSoverUDP, and transparent ethernet bridging (TEB) where the inner L2 header is an ethernet header. Testing of BPF encap against tunnels is done for cases where configuration of such tunnels is possible (MPLSoverGRE[6], MPLSoverUDP, gre[6]tap), and skipped otherwise. Testing of BPF encap/decap is always carried out. Changes since v1: - fixed formatting of commit references. - BPF_F_ADJ_ROOM_FIXED_GSO flag enabled on all variants (patch 1) - fixed fou6 options for UDP encap; checksum errors observed were due to the fact fou6 tunnel was not set up with correct ipproto options (41 -6). 0 checksums work fine (patch 1) - added definitions for mask and shift used in setting L2 length (patch 2) - allow udp encap with fixed GSO (patch 2) - changed "elen" to "l2_len" to be more descriptive (patch 4) - added support for ethernet L2 encap to tests; testing against gre[6]tap tunnels (patch 4). Alan Maguire (4): selftests_bpf: add UDP encap to test_tc_tunnel bpf: add layer 2 encap support to bpf_skb_adjust_room bpf: sync bpf.h to tools/ for BPF_F_ADJ_ROOM_ENCAP_L2 selftests_bpf: add L2 encap to test_tc_tunnel include/uapi/linux/bpf.h | 10 + net/core/filter.c | 15 +- tools/include/uapi/linux/bpf.h | 10 + tools/testing/selftests/bpf/progs/test_tc_tunnel.c | 335 +++++++++++++++++---- tools/testing/selftests/bpf/test_tc_tunnel.sh | 147 +++++++-- 5 files changed, 427 insertions(+), 90 deletions(-) -- 1.8.3.1

6 years, 3 months

2
8
0 0

Re: [GIT PULL] Kselftest update for Linux 5.1-rc4

by shuah

On 4/3/19 7:34 PM, shuah wrote: > Hi Linus, > > Please pull the following Kselftest update for Linux 5.1-rc4 > > This Kselftest update for Linux 5.1-rc4 consists of fixes to rseq, > cgroup, and efivarfs tests. > > diff is attached. > > thanks, > -- Shuah > Hi Linus, I just noticed that one commit in this pull request has mismatched author and signed-off. Please disregard the pull request. I will fix this and send a new pull request. Sorry for the noise. thanks, -- Shuah

6 years, 3 months

1
0
0 0

[PATCH linux-next v9 0/7] ptrace: add PTRACE_GET_SYSCALL_INFO request

by Dmitry V. Levin

[I suggest to stop waiting for more acks and merge this into linux-next as is.] PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain details of the syscall the tracee is blocked in. There are two reasons for a special syscall-related ptrace request. Firstly, with the current ptrace API there are cases when ptracer cannot retrieve necessary information about syscalls. Some examples include: * The notorious int-0x80-from-64-bit-task issue. See [1] for details. In short, if a 64-bit task performs a syscall through int 0x80, its tracer has no reliable means to find out that the syscall was, in fact, a compat syscall, and misidentifies it. * Syscall-enter-stop and syscall-exit-stop look the same for the tracer. Common practice is to keep track of the sequence of ptrace-stops in order not to mix the two syscall-stops up. But it is not as simple as it looks; for example, strace had a (just recently fixed) long-standing bug where attaching strace to a tracee that is performing the execve system call led to the tracer identifying the following syscall-exit-stop as syscall-enter-stop, which messed up all the state tracking. * Since the introduction of commit 84d77d3f06e7e8dea057d10e8ec77ad71f721be3 ("ptrace: Don't allow accessing an undumpable mm"), both PTRACE_PEEKDATA and process_vm_readv become unavailable when the process dumpable flag is cleared. On such architectures as ia64 this results in all syscall arguments being unavailable for the tracer. Secondly, ptracers also have to support a lot of arch-specific code for obtaining information about the tracee. For some architectures, this requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall argument and return value. PTRACE_GET_SYSCALL_INFO returns the following structure: struct ptrace_syscall_info { __u8 op; /* PTRACE_SYSCALL_INFO_* */ __u32 arch __attribute__((__aligned__(sizeof(__u32)))); __u64 instruction_pointer; __u64 stack_pointer; union { struct { __u64 nr; __u64 args[6]; } entry; struct { __s64 rval; __u8 is_error; } exit; struct { __u64 nr; __u64 args[6]; __u32 ret_data; } seccomp; }; }; The structure was chosen according to [2], except for the following changes: * seccomp substructure was added as a superset of entry substructure; * the type of nr field was changed from int to __u64 because syscall numbers are, as a practical matter, 64 bits; * stack_pointer field was added along with instruction_pointer field since it is readily available and can save the tracer from extra PTRACE_GETREGS/PTRACE_GETREGSET calls; * arch is always initialized to aid with tracing system calls * such as execve(); * instruction_pointer and stack_pointer are always initialized so they could be easily obtained for non-syscall stops; * a boolean is_error field was added along with rval field, this way the tracer can more reliably distinguish a return value from an error value. strace has been ported to PTRACE_GET_SYSCALL_INFO. Starting with release 4.26, strace uses PTRACE_GET_SYSCALL_INFO API as the preferred mechanism of obtaining syscall information. [1] https://lore.kernel.org/lkml/CA+55aFzcSVmdDj9Lh_gdbz1OzHyEm6ZrGPBDAJnywm2LF… [2] https://lore.kernel.org/lkml/CAObL_7GM0n80N7J_DFw_eQyfLyzq+sf4y2AvsCCV88Tb3… --- Notes: v9: * Rebased to linux-next again due to syscall_get_arguments() signature change. v8: * Moved syscall_get_arch() specific patches to a separate patchset which is now merged into audit/next tree. * Rebased to linux-next. * Moved ptrace_get_syscall_info code under #ifdef CONFIG_HAVE_ARCH_TRACEHOOK, narrowing down the set of architectures supported by this implementation back to those 19 that enable CONFIG_HAVE_ARCH_TRACEHOOK because I failed to get all syscall_get_*(), instruction_pointer(), and user_stack_pointer() functions implemented on some niche architectures. This leaves the following architectures out: alpha, h8300, m68k, microblaze, and unicore32. v7: * Rebased to v5.0-rc1. * 5 arch-specific preparatory patches out of 25 have been merged into v5.0-rc1 via arch trees. v6: * Add syscall_get_arguments and syscall_set_arguments wrappers to asm-generic/syscall.h, requested by Geert. * Change PTRACE_GET_SYSCALL_INFO return code: do not take trailing paddings into account, use the end of the last field of the structure being written. * Change struct ptrace_syscall_info: * remove .frame_pointer field, is is not needed and not portable; * make .arch field explicitly aligned, remove no longer needed padding before .arch field; * remove trailing pads, they are no longer needed. v5: * Merge separate series and patches into the single series. * Change PTRACE_EVENTMSG_SYSCALL_{ENTRY,EXIT} values as requested by Oleg. * Change struct ptrace_syscall_info: generalize instruction_pointer, stack_pointer, and frame_pointer fields by moving them from ptrace_syscall_info.{entry,seccomp} substructures to ptrace_syscall_info and initializing them for all stops. * Add PTRACE_SYSCALL_INFO_NONE, set it when not in a syscall stop, so e.g. "strace -i" could use PTRACE_SYSCALL_INFO_SECCOMP to obtain instruction_pointer when the tracee is in a signal stop. * Patch all remaining architectures to provide all necessary syscall_get_* functions. * Make available for all architectures: do not conditionalize on CONFIG_HAVE_ARCH_TRACEHOOK since all syscall_get_* functions are implemented on all architectures. * Add a test for PTRACE_GET_SYSCALL_INFO to selftests/ptrace. v4: * Do not introduce task_struct.ptrace_event, use child->last_siginfo->si_code instead. * Implement PTRACE_SYSCALL_INFO_SECCOMP and ptrace_syscall_info.seccomp support along with PTRACE_SYSCALL_INFO_{ENTRY,EXIT} and ptrace_syscall_info.{entry,exit}. v3: * Change struct ptrace_syscall_info. * Support PTRACE_EVENT_SECCOMP by adding ptrace_event to task_struct. * Add proper defines for ptrace_syscall_info.op values. * Rename PT_SYSCALL_IS_ENTERING and PT_SYSCALL_IS_EXITING to PTRACE_EVENTMSG_SYSCALL_ENTRY and PTRACE_EVENTMSG_SYSCALL_EXIT * and move them to uapi. v2: * Do not use task->ptrace. * Replace entry_info.is_compat with entry_info.arch, use syscall_get_arch(). * Use addr argument of sys_ptrace to get expected size of the struct; return full size of the struct. Dmitry V. Levin (6): nds32: fix asm/syscall.h # waiting for ack since early January hexagon: define syscall_get_error() and syscall_get_return_value() # waiting for ack since November mips: define syscall_get_error() # acked parisc: define syscall_get_error() # acked powerpc: define syscall_get_error() # waiting for ack since early December selftests/ptrace: add a test case for PTRACE_GET_SYSCALL_INFO Elvira Khabirova (1): ptrace: add PTRACE_GET_SYSCALL_INFO request # reviewed arch/hexagon/include/asm/syscall.h | 14 + arch/mips/include/asm/syscall.h | 6 + arch/nds32/include/asm/syscall.h | 27 +- arch/parisc/include/asm/syscall.h | 7 + arch/powerpc/include/asm/syscall.h | 10 + include/linux/tracehook.h | 9 +- include/uapi/linux/ptrace.h | 35 +++ kernel/ptrace.c | 103 ++++++- tools/testing/selftests/ptrace/.gitignore | 1 + tools/testing/selftests/ptrace/Makefile | 2 +- .../selftests/ptrace/get_syscall_info.c | 271 ++++++++++++++++++ 11 files changed, 470 insertions(+), 15 deletions(-) create mode 100644 tools/testing/selftests/ptrace/get_syscall_info.c -- ldv

6 years, 3 months

2
3
0 0

TAP 13 output format

by Kees Cook

Hi, I'm working on writing a LKDTM selftest, and I noticed that the output format for the existing selftest tests don't seem to actually conform to the TAP 13 specification[1]. Namely, there is a ton of output between the "ok" and "not ok" lines, in various places for various reasons. IIUC, the spec says these lines should follow the "ok" lines and be (at least) indented to be parsed as YAML. How does the existing CI do the selftest output parsing? Is there some other spec I should have read for the correct interpretation here? (TAP 13 says this part isn't exactly agreed on yet.) e.g., I see this right now: # cd tools/testing/selftests # make --silent -C lib run_tests TAP version 13 selftests: lib: printf.sh ======================================== printf: module test_printf is not found [SKIP] not ok 1..1 selftests: lib: printf.sh [SKIP] selftests: lib: bitmap.sh ======================================== bitmap: module test_bitmap is not found [SKIP] not ok 1..2 selftests: lib: bitmap.sh [SKIP] selftests: lib: prime_numbers.sh ======================================== prime_numbers: module prime_numbers is not found [SKIP] not ok 1..3 selftests: lib: prime_numbers.sh [SKIP] There is no "plan" line, lots of lines between test lines, and the test numbering is non-spec. I would have expected the following output: TAP version 13 1..3 lib not ok 1 lib: printf.sh # SKIP module test_printf is not found not ok 2 lib: bitmap.sh # SKIP module test_bitmap is not found not ok 3 lib: prime_numbers.sh # SKIP module prime_numbers is not found And for output, here's another: # make --silent -C ipc run_tests TAP version 13 selftests: ipc: msgque ======================================== Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 1..0 ok 1..1 selftests: ipc: msgque [PASS] The test-specific output should be after the "ok" line: TAP version 13 1..1 ipc ok 1 ipc: msgque --- output: |+ Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 ... The test runner knows how many tests are going to be run, so the "plan" line can be correct. The ok/not-ok lines can be fixed to avoid the prefixed "1..", and the output during the tests can be captured and indented for valid YAML (above uses "output" to capture the text output with a literal block quote style of "|+"[2]). It seems like the current output cannot be parsed by things like Test::Harness. The spec is pretty specific about "Any output that is not a version, a plan, a test line, a YAML block, a diagnostic or a bail out is incorrect." Has this been discussed before? I spent a little time looking but couldn't find an earlier thread... Thanks! -Kees [1] https://testanything.org/tap-version-13-specification.html [2] https://yaml-multiline.info -- Kees Cook

6 years, 3 months

2
2
0 0

[RFC PATCH 0/2] Kselftest shell (or even C) API

by Petr Vorel

Hi, this is a draft trying to define some API in order to remove some redundancy from kselftest shell scripts. Existing kselftest.h already defines some sort of API for C, there is none for shell. It's just a small example how things could be. Draft, not meant to be really merged. But instead of defining shell library (with more useful helpers), I'd rather adopt LTP shell [1] and C [2] API to kselftest. LTP API [1] is more like a framework, easy to use with a lot of helpers making tests 1) small, concentrating on the problem itself 2) have unique output. API is well documented [3] [4], it's creator Cyril Hrubis made it after years experience of handling (at the time) quite bad quality LTP code. Rewriting LTP tests to use this API improved tests a lot (less buggy, easier to read). Some examples of advantages of LTP API: * SAFE_*() macros for C, which handles errors inside a library * unified messages, unified test status, unified way to exit testing due missing functionality, at the end of testing there is summary of passed, failed and skipped tests * many prepared functionality for both C and shell * handling threads, parent-child synchronization * setup and cleanup functions * "flags" for defining requirements or certain functionality (need root, temporary directory, ...) * and many other kselftest and LTP has a bit different goals and approach. Probably not all of LTP API is needed atm, but I guess it's at least worth of thinking to adopt it. There are of course other options: reinvent a wheel or left kselftest code in a state it is now (code quality varies, some of the code is really messy, buggy, not even compile). [1] https://github.com/linux-test-project/ltp/blob/master/testcases/lib/tst_tes… [2] https://github.com/linux-test-project/ltp/tree/master/lib [3] https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines#22-w… [4] https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines#23-w… Petr Vorel (2): selftests: Start shell API selftest/kexec: Use kselftest shell API .../selftests/kexec/kexec_common_lib.sh | 74 +++++-------------- .../selftests/kexec/test_kexec_file_load.sh | 53 ++++++------- .../selftests/kexec/test_kexec_load.sh | 20 ++--- tools/testing/selftests/kselftest.sh | 53 +++++++++++++ 4 files changed, 105 insertions(+), 95 deletions(-) mode change 100755 => 100644 tools/testing/selftests/kexec/kexec_common_lib.sh create mode 100644 tools/testing/selftests/kselftest.sh -- 2.20.1

6 years, 3 months

3
11
0 0

next-20190408 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ git repo: not informed git branch: not informed git commit: not informed git describe: not informed Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190408 Regressions (compared to build next-20190405) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20190405) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 0 total tests in the following environments and test suites. pass 0 fail 0 xfail 0 skip 0 Environments -------------- - x86_64 Test Suites ----------- Failures ------------------------------------------------------------------------ x86: Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

[PATCH bpf-next v2 5/5] selftests: bpf: test writable buffers in raw tps

by Matt Mullins

This tests that: * a BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE cannot be attached if it uses either: * a variable offset to the tracepoint buffer, or * an offset beyond the size of the tracepoint buffer * a tracer can modify the buffer provided when attached to a writable tracepoint in bpf_prog_test_run Signed-off-by: Matt Mullins <mmullins(a)fb.com> --- include/trace/events/bpf_test_run.h | 50 ++++++++++++ net/bpf/test_run.c | 4 + .../raw_tp_writable_reject_nbd_invalid.c | 40 ++++++++++ .../bpf/prog_tests/raw_tp_writable_test_run.c | 80 +++++++++++++++++++ .../selftests/bpf/verifier/raw_tp_writable.c | 34 ++++++++ 5 files changed, 208 insertions(+) create mode 100644 include/trace/events/bpf_test_run.h create mode 100644 tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c create mode 100644 tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c create mode 100644 tools/testing/selftests/bpf/verifier/raw_tp_writable.c diff --git a/include/trace/events/bpf_test_run.h b/include/trace/events/bpf_test_run.h new file mode 100644 index 000000000000..abf466839ea4 --- /dev/null +++ b/include/trace/events/bpf_test_run.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM bpf_test_run + +#if !defined(_TRACE_NBD_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_BPF_TEST_RUN_H + +#include <linux/tracepoint.h> + +DECLARE_EVENT_CLASS(bpf_test_finish, + + TP_PROTO(int *err), + + TP_ARGS(err), + + TP_STRUCT__entry( + __field(int, err) + ), + + TP_fast_assign( + __entry->err = *err; + ), + + TP_printk("bpf_test_finish with err=%d", __entry->err) +); + +#ifdef DEFINE_EVENT_WRITABLE +#undef BPF_TEST_RUN_DEFINE_EVENT +#define BPF_TEST_RUN_DEFINE_EVENT(template, call, proto, args, size) \ + DEFINE_EVENT_WRITABLE(template, call, PARAMS(proto), \ + PARAMS(args), size) +#else +#undef BPF_TEST_RUN_DEFINE_EVENT +#define BPF_TEST_RUN_DEFINE_EVENT(template, call, proto, args, size) \ + DEFINE_EVENT(template, call, PARAMS(proto), PARAMS(args)) +#endif + +BPF_TEST_RUN_DEFINE_EVENT(bpf_test_finish, bpf_test_finish, + + TP_PROTO(int *err), + + TP_ARGS(err), + + sizeof(int) +); + +#endif + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index fab142b796ef..25e757102595 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -13,6 +13,9 @@ #include <net/sock.h> #include <net/tcp.h> +#define CREATE_TRACE_POINTS +#include <trace/events/bpf_test_run.h> + static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat, u32 *retval, u32 *time) { @@ -100,6 +103,7 @@ static int bpf_test_finish(const union bpf_attr *kattr, if (err != -ENOSPC) err = 0; out: + trace_bpf_test_finish(&err); return err; } diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c new file mode 100644 index 000000000000..328d5c4b084b --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_reject_nbd_invalid(void) +{ + __u32 duration = 0; + char error[4096]; + int bpf_fd = -1, tp_fd = -1; + + const struct bpf_insn program[] = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_6, 128), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = program, + .insns_cnt = sizeof(program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable loaded", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + tp_fd = bpf_raw_tracepoint_open("nbd_send_request", bpf_fd); + if (CHECK(tp_fd >= 0, "bpf_raw_tracepoint_writable opened", + "erroneously succeeded\n")) + goto out_bpffd; + + close(tp_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c new file mode 100644 index 000000000000..4145925f9cab --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_test_run(void) +{ + __u32 duration = 0; + char error[4096]; + + const struct bpf_insn trace_program[] = { + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_6, 0), + BPF_LD_IMM64(BPF_REG_0, 42), + BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = trace_program, + .insns_cnt = sizeof(trace_program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + int bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable loaded", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + const struct bpf_insn skb_program[] = { + BPF_LD_IMM64(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr skb_load_attr = { + .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, + .license = "GPL v2", + .insns = skb_program, + .insns_cnt = sizeof(skb_program) / sizeof(struct bpf_insn), + }; + + int filter_fd = + bpf_load_program_xattr(&skb_load_attr, error, sizeof(error)); + if (CHECK(filter_fd < 0, "test_program_loaded", "failed: %d errno %d\n", + filter_fd, errno)) + goto out_bpffd; + + int tp_fd = bpf_raw_tracepoint_open("bpf_test_finish", bpf_fd); + if (CHECK(tp_fd < 0, "bpf_raw_tracepoint_writable opened", + "failed: %d errno %d\n", tp_fd, errno)) + goto out_filterfd; + + char test_skb[128] = { + 0, + }; + + __u32 prog_ret; + int err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, + 0, &prog_ret, 0); + CHECK(err != 42, "test_run", + "tracepoint did not modify return value\n"); + CHECK(prog_ret != 0, "test_run_ret", + "socket_filter did not return 0\n"); + + close(tp_fd); + + err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, 0, + &prog_ret, 0); + CHECK(err != 0, "test_run_notrace", + "test_run failed with %d errno %d\n", err, errno); + CHECK(prog_ret != 0, "test_run_ret_notrace", + "socket_filter did not return 0\n"); + +out_filterfd: + close(filter_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/verifier/raw_tp_writable.c b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c new file mode 100644 index 000000000000..95b5d70a1dc1 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c @@ -0,0 +1,34 @@ +{ + "raw_tracepoint_writable: reject variable offset", + .insns = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + + BPF_LD_MAP_FD(BPF_REG_1, 0), + /* move the key (== 0) to r10-8 */ + BPF_MOV32_IMM(BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0), + /* lookup in the map */ + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_map_lookup_elem), + + /* exit clean if null */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + + /* shift the buffer pointer to a variable location */ + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, 0), + BPF_ALU64_REG(BPF_ADD, BPF_REG_6, BPF_REG_0), + /* clobber whatever's there */ + BPF_MOV64_IMM(BPF_REG_7, 4242), + BPF_STX_MEM(BPF_DW, BPF_REG_6, BPF_REG_7, 0), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 1, }, + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .errstr = "R6 invalid variable buffer offset: off=0, var_off=(0x0; 0xffffffff)", +}, -- 2.17.1

6 years, 3 months

1
0
0 0

next-20190405 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc3 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 81e0cd6a7f096b96428dfec5735c90432ae89271 git describe: next-20190405 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190405 Regressions (compared to build next-20190404) ------------------------------------------------------------------------ x86_64: kselftest: * bpf_test_select_reuseport Fixes (compared to build next-20190404) ------------------------------------------------------------------------ qemu_arm64: kselftest: * bpf_test_maps * bpf_test_sockmap x86_64: kselftest: * bpf_test_sock_addr.sh * bpf_test_sockmap In total: ------------------------------------------------------------------------ Ran 1482 total tests in the following environments and test suites. pass 969 fail 322 xfail 0 skip 191 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/size_get_size * kselftest/tpm2_test_smoke.sh * kselftest/x86_syscall_arg_fault_32 qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_fsgsbase_64 x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/timestamping_txtimestamp.sh dragonboard-410c: juno-r2: i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test x86: * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/cgroup_test_core * kselftest-vsyscall-mode-none/dma-buf_udmabuf * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/timestamping_txtimestamp.sh Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

6 years, 3 months

1
0
0 0

[PATCH v5 0/9] selftests/kexec: add kexec tests

by Mimi Zohar

The kernel may be configured or an IMA policy specified on the boot command line requiring the kexec kernel image signature to be verified. At runtime a custom IMA policy may be loaded, replacing the policy specified on the boot command line. In addition, the arch specific policy rules are dynamically defined based on the secure boot mode that may require the kernel image signature to be verified. The kernel image may have a PE signature, an IMA signature, or both. In addition, there are two kexec syscalls - kexec_load and kexec_file_load - but only the kexec_file_load syscall can verify signatures. These kexec selftests verify that only properly signed kernel images are loaded as required, based on the kernel config, the secure boot mode, and the IMA runtime policy. Loading a kernel image requires root privileges. To run just the KEXEC selftests: sudo make TARGETS=kexec kselftest Changelog v5: - Make tests independent of IMA being enabled, folding the changes into the kexec_file_load test. - Add support for CONFIG_KEXEC_VERIFY_SIG being enabled, but not CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. Changelog v4: - Moved the kexec tests to selftests/kexec, as requested by Dave Young. - Removed the kernel module selftest from this patch set. - Rewritten cover letter, removing reference to kernel modules. Changelog v3: - Updated tests based on Petr's review, including the defining a common test to check for root privileges. - Modified config, removing the CONFIG_KEXEC_VERIFY_SIG requirement. - Updated the SPDX license to GPL-2.0 based on Shuah's review. - Updated the secureboot mode test to check the SetupMode as well, based on David Young's review. Mimi Zohar (8): selftests/kexec: move the IMA kexec_load selftest to selftests/kexec selftests/kexec: cleanup the kexec selftest selftests/kexec: define a set of common functions selftests/kexec: define common logging functions kselftest/kexec: define "require_root_privileges" selftests/kexec: kexec_file_load syscall test selftests/kexec: check kexec_load and kexec_file_load are enabled selftests/kexec: make kexec_load test independent of IMA being enabled Petr Vorel (1): selftests/kexec: Add missing '=y' to config options tools/testing/selftests/Makefile | 2 +- tools/testing/selftests/ima/Makefile | 11 -- tools/testing/selftests/ima/config | 4 - tools/testing/selftests/ima/test_kexec_load.sh | 54 ------ tools/testing/selftests/kexec/Makefile | 12 ++ tools/testing/selftests/kexec/config | 3 + tools/testing/selftests/kexec/kexec_common_lib.sh | 175 +++++++++++++++++ .../selftests/kexec/test_kexec_file_load.sh | 208 +++++++++++++++++++++ tools/testing/selftests/kexec/test_kexec_load.sh | 47 +++++ 9 files changed, 446 insertions(+), 70 deletions(-) delete mode 100644 tools/testing/selftests/ima/Makefile delete mode 100644 tools/testing/selftests/ima/config delete mode 100755 tools/testing/selftests/ima/test_kexec_load.sh create mode 100644 tools/testing/selftests/kexec/Makefile create mode 100644 tools/testing/selftests/kexec/config create mode 100755 tools/testing/selftests/kexec/kexec_common_lib.sh create mode 100755 tools/testing/selftests/kexec/test_kexec_file_load.sh create mode 100755 tools/testing/selftests/kexec/test_kexec_load.sh -- 2.7.5

6 years, 3 months

2
16
0 0

[PATCH v10 5/9] kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy()

by Roman Gushchin

If the cgroup destruction races with an exit() of a belonging process(es), cg_kill_all() may fail. It's not a good reason to make cg_destroy() fail and leave the cgroup in place, potentially causing next test runs to fail. Signed-off-by: Roman Gushchin <guro(a)fb.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Tejun Heo <tj(a)kernel.org> Cc: kernel-team(a)fb.com Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/cgroup/cgroup_util.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 14c9fe284806..eba06f94433b 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -227,9 +227,7 @@ int cg_destroy(const char *cgroup) retry: ret = rmdir(cgroup); if (ret && errno == EBUSY) { - ret = cg_killall(cgroup); - if (ret) - return ret; + cg_killall(cgroup); usleep(100); goto retry; } -- 2.20.1

6 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror