This is v9 of the TDX selftests.
Thanks everyone for the thorough review on v8 [1]. I tried addressing
all the comments. I'm terribly sorry if I missed something.
The original v8 series [1] was split to make reviewing the test framework
changes easier. This series includes the original patches up to the TDX
lifecycle test which is the first TDX selftest in the series.
This series is based on v6.17-rc2
Changes from v8:
- Rebased on top of v6.17-rc2
- Drop several patches which are no longer needed now that TDX support
is integrated into the common flow.
- Split several patches to make reviewing easier.
- Massive refactor compared to v8 to pull TDX special handling into
__vm_create() and vm_vcpu_add() instead of creating separate functions
for TDX.
- Use kbuild to expose values from c to assembly code.
- Move setup of the reset vectors to c code as suggested by Sean.
- Drop redundant cpuid masking functions which are no longer necessary.
- Initialize TDX protected pages one at a time instead of allocating
large chinks of memory.
- Add UCALL support for TDX to align with the rest of the selftests.
- Minor fixes to kselftest_harness.h and virt_map() that were identified
as part of this work.
[1] https://lore.kernel.org/lkml/20250807201628.1185915-1-sagis@google.com/
Ackerley Tng (2):
KVM: selftests: Add helpers to init TDX memory and finalize VM
KVM: selftests: Add ucall support for TDX
Erdem Aktas (2):
KVM: selftests: Add TDX boot code
KVM: selftests: Add support for TDX TDCALL from guest
Isaku Yamahata (2):
KVM: selftests: Update kvm_init_vm_address_properties() for TDX
KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs'
attribute configuration
Sagi Shahar (13):
KVM: selftests: Include overflow.h instead of redefining
is_signed_type()
KVM: selftests: Allocate pgd in virt_map() as necessary
KVM: selftests: Expose functions to get default sregs values
KVM: selftests: Expose function to allocate guest vCPU stack
KVM: selftests: Expose segment definitons to assembly files
KVM: selftests: Add kbuild definitons
KVM: selftests: Define structs to pass parameters to TDX boot code
KVM: selftests: Set up TDX boot code region
KVM: selftests: Set up TDX boot parameters region
KVM: selftests: Add helper to initialize TDX VM
KVM: selftests: Hook TDX support to vm and vcpu creation
KVM: selftests: Add wrapper for TDX MMIO from guest
KVM: selftests: Add TDX lifecycle test
tools/include/linux/kbuild.h | 18 +
tools/testing/selftests/kselftest_harness.h | 3 +-
tools/testing/selftests/kvm/Makefile.kvm | 32 ++
.../selftests/kvm/include/x86/processor.h | 8 +
.../selftests/kvm/include/x86/processor_asm.h | 12 +
.../selftests/kvm/include/x86/tdx/td_boot.h | 81 ++++
.../kvm/include/x86/tdx/td_boot_asm.h | 16 +
.../selftests/kvm/include/x86/tdx/tdcall.h | 34 ++
.../selftests/kvm/include/x86/tdx/tdx.h | 14 +
.../selftests/kvm/include/x86/tdx/tdx_util.h | 86 ++++
.../testing/selftests/kvm/include/x86/ucall.h | 4 +-
tools/testing/selftests/kvm/lib/kvm_util.c | 25 +-
.../testing/selftests/kvm/lib/x86/processor.c | 122 ++++--
.../selftests/kvm/lib/x86/tdx/td_boot.S | 60 +++
.../kvm/lib/x86/tdx/td_boot_offsets.c | 21 +
.../selftests/kvm/lib/x86/tdx/tdcall.S | 93 +++++
.../kvm/lib/x86/tdx/tdcall_offsets.c | 16 +
tools/testing/selftests/kvm/lib/x86/tdx/tdx.c | 22 +
.../selftests/kvm/lib/x86/tdx/tdx_util.c | 391 ++++++++++++++++++
tools/testing/selftests/kvm/lib/x86/ucall.c | 45 +-
tools/testing/selftests/kvm/x86/tdx_vm_test.c | 31 ++
21 files changed, 1095 insertions(+), 39 deletions(-)
create mode 100644 tools/include/linux/kbuild.h
create mode 100644 tools/testing/selftests/kvm/include/x86/processor_asm.h
create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot.h
create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h
create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdcall.h
create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx.h
create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx_util.h
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot_offsets.c
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall.S
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall_offsets.c
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx.c
create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx_util.c
create mode 100644 tools/testing/selftests/kvm/x86/tdx_vm_test.c
--
2.51.0.rc1.193.gad69d77794-goog
Currently, even if some subtests fails, the end result will still yield
"ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are
any failures.
Signed-off-by: Ricardo B. Marlière <rbm(a)suse.com>
---
tools/testing/selftests/bpf/test_xsk.sh | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index 65aafe0003db054e9dfd156092fed53b07be06a0..62db060298a4a3b4391ee4cfa50557cf4a62d3d5 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -241,4 +241,6 @@ done
if [ $failures -eq 0 ]; then
echo "All tests successful!"
+else
+ exit 1
fi
---
base-commit: 5b6d6fe1ca7b712c74f78426bb23c465fd34b322
change-id: 20250828-selftests-bpf-test_xsk_ret-1eb27dbac071
Best regards,
--
Ricardo B. Marlière <rbm(a)suse.com>
Clean up tests which expect shell=True without explicitly passing
that param to cmd(). There seems to be only one such case, and
in fact it's better converted to a direct write.
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
---
tools/testing/selftests/drivers/net/napi_threaded.py | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/drivers/net/napi_threaded.py b/tools/testing/selftests/drivers/net/napi_threaded.py
index ed66efa481b0..f4be72b2145a 100755
--- a/tools/testing/selftests/drivers/net/napi_threaded.py
+++ b/tools/testing/selftests/drivers/net/napi_threaded.py
@@ -24,7 +24,8 @@ from lib.py import cmd, defer, ethtool
def _set_threaded_state(cfg, threaded) -> None:
- cmd(f"echo {threaded} > /sys/class/net/{cfg.ifname}/threaded")
+ with open(f"/sys/class/net/{cfg.ifname}/threaded", "wb") as fp:
+ fp.write(str(threaded).encode('utf-8'))
def _setup_deferred_cleanup(cfg) -> None:
--
2.51.0
Mshare is a developing feature proposed by Anthony Yznaga and Khalid Aziz
that enables sharing of PTEs across processes. The V3 patch set has been
posted for review:
https://lore.kernel.org/linux-mm/20250820010415.699353-1-anthony.yznaga@ora…
This patch set adds selftests to exercise and demonstrate basic
functionality of mshare.
The initial tests use open, ioctl, and mmap syscalls to establish a shared
memory mapping between two processes and verify the expected behavior.
Additional tests are included to check interoperability with swap and
Transparent Huge Pages.
Future work will extend coverage to other use cases such as integration
with KVM and more advanced scenarios.
This series is intended to be applied on top of mshare V3, which is
based on mm-new (2025-08-15).
Yongting Lin (8):
mshare: Add selftests
mshare: selftests: Adding config fragment
mshare: selftests: Add some helper function for mshare filesystem
mshare: selftests: Add test case shared memory
mshare: selftests: Add test case ioctl unmap
mshare: selftests: Add some helper functions for reading and
controlling cgroup
mshare: selftests: Add test case to demostrate the swaping of mshare
memory
mshare: selftests: Add test case to demostrate that mshare doesn't
support THP
tools/testing/selftests/mshare/.gitignore | 3 +
tools/testing/selftests/mshare/Makefile | 7 +
tools/testing/selftests/mshare/basic.c | 108 ++++++++++
tools/testing/selftests/mshare/config | 1 +
tools/testing/selftests/mshare/memory.c | 82 +++++++
tools/testing/selftests/mshare/util.c | 251 ++++++++++++++++++++++
6 files changed, 452 insertions(+)
create mode 100644 tools/testing/selftests/mshare/.gitignore
create mode 100644 tools/testing/selftests/mshare/Makefile
create mode 100644 tools/testing/selftests/mshare/basic.c
create mode 100644 tools/testing/selftests/mshare/config
create mode 100644 tools/testing/selftests/mshare/memory.c
create mode 100644 tools/testing/selftests/mshare/util.c
--
2.20.1
The BTF dumper code currently displays arrays of characters as just that -
arrays, with each character formatted individually. Sometimes this is what
makes sense, but it's nice to be able to treat that array as a string.
This change adds a special case to the btf_dump functionality to allow
0-terminated arrays of single-byte integer values to be printed as
character strings. Characters for which isprint() returns false are
printed as hex-escaped values. This is enabled when the new ".emit_strings"
is set to 1 in the btf_dump_type_data_opts structure.
As an example, here's what it looks like to dump the string "hello" using
a few different field values for btf_dump_type_data_opts (.compact = 1):
- .emit_strings = 0, .skip_names = 0: (char[6])['h','e','l','l','o',]
- .emit_strings = 0, .skip_names = 1: ['h','e','l','l','o',]
- .emit_strings = 1, .skip_names = 0: (char[6])"hello"
- .emit_strings = 1, .skip_names = 1: "hello"
Here's the string "h\xff", dumped with .compact = 1 and .skip_names = 1:
- .emit_strings = 0: ['h',-1,]
- .emit_strings = 1: "h\xff"
Signed-off-by: Blake Jones <blakejones(a)google.com>
---
tools/lib/bpf/btf.h | 3 ++-
tools/lib/bpf/btf_dump.c | 55 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 56 insertions(+), 2 deletions(-)
diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h
index 4392451d634b..ccfd905f03df 100644
--- a/tools/lib/bpf/btf.h
+++ b/tools/lib/bpf/btf.h
@@ -326,9 +326,10 @@ struct btf_dump_type_data_opts {
bool compact; /* no newlines/indentation */
bool skip_names; /* skip member/type names */
bool emit_zeroes; /* show 0-valued fields */
+ bool emit_strings; /* print char arrays as strings */
size_t :0;
};
-#define btf_dump_type_data_opts__last_field emit_zeroes
+#define btf_dump_type_data_opts__last_field emit_strings
LIBBPF_API int
btf_dump__dump_type_data(struct btf_dump *d, __u32 id,
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 460c3e57fadb..7c2f1f13f958 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -68,6 +68,7 @@ struct btf_dump_data {
bool compact;
bool skip_names;
bool emit_zeroes;
+ bool emit_strings;
__u8 indent_lvl; /* base indent level */
char indent_str[BTF_DATA_INDENT_STR_LEN];
/* below are used during iteration */
@@ -2028,6 +2029,52 @@ static int btf_dump_var_data(struct btf_dump *d,
return btf_dump_dump_type_data(d, NULL, t, type_id, data, 0, 0);
}
+static int btf_dump_string_data(struct btf_dump *d,
+ const struct btf_type *t,
+ __u32 id,
+ const void *data)
+{
+ const struct btf_array *array = btf_array(t);
+ const char *chars = data;
+ __u32 i;
+
+ /* Make sure it is a NUL-terminated string. */
+ for (i = 0; i < array->nelems; i++) {
+ if ((void *)(chars + i) >= d->typed_dump->data_end)
+ return -E2BIG;
+ if (chars[i] == '\0')
+ break;
+ }
+ if (i == array->nelems) {
+ /* The caller will print this as a regular array. */
+ return -EINVAL;
+ }
+
+ btf_dump_data_pfx(d);
+ btf_dump_printf(d, "\"");
+
+ for (i = 0; i < array->nelems; i++) {
+ char c = chars[i];
+
+ if (c == '\0') {
+ /*
+ * When printing character arrays as strings, NUL bytes
+ * are always treated as string terminators; they are
+ * never printed.
+ */
+ break;
+ }
+ if (isprint(c))
+ btf_dump_printf(d, "%c", c);
+ else
+ btf_dump_printf(d, "\\x%02x", (__u8)c);
+ }
+
+ btf_dump_printf(d, "\"");
+
+ return 0;
+}
+
static int btf_dump_array_data(struct btf_dump *d,
const struct btf_type *t,
__u32 id,
@@ -2055,8 +2102,13 @@ static int btf_dump_array_data(struct btf_dump *d,
* char arrays, so if size is 1 and element is
* printable as a char, we'll do that.
*/
- if (elem_size == 1)
+ if (elem_size == 1) {
+ if (d->typed_dump->emit_strings &&
+ btf_dump_string_data(d, t, id, data) == 0) {
+ return 0;
+ }
d->typed_dump->is_array_char = true;
+ }
}
/* note that we increment depth before calling btf_dump_print() below;
@@ -2544,6 +2596,7 @@ int btf_dump__dump_type_data(struct btf_dump *d, __u32 id,
d->typed_dump->compact = OPTS_GET(opts, compact, false);
d->typed_dump->skip_names = OPTS_GET(opts, skip_names, false);
d->typed_dump->emit_zeroes = OPTS_GET(opts, emit_zeroes, false);
+ d->typed_dump->emit_strings = OPTS_GET(opts, emit_strings, false);
ret = btf_dump_dump_type_data(d, NULL, t, id, data, 0, 0);
--
2.49.0.1204.g71687c7c1d-goog