On 10/19/26 14:44, Laurent Pinchart wrote:
On Mon, Oct 19, 2026 at 09:14:07AM +0200, Karl Mehltretter wrote:
UVC and vivid access imported DMA-BUFs with the CPU without cache synchronization. On a Pi 400, captured data remained in the CPU cache while physical RAM was stale.
Add an opt-in queue flag to bracket CPU access from buf_prepare() through buf_finish(). The allocator cannot imply CPU use because some vb2-vmalloc drivers pass buffers to hardware. Patch 1 balances finish operations in VIDIOC_REMOVE_BUFS so removing prepared buffers closes this interval.
This seems completely wrong.
It looks a bit questionable from 1000 miles above, but I might be wrong.
Let me iterate the rules here:
Accessing imported DMA-buf with the CPU from userspace should only be possible by using the dma_buf_mmap() interface and that includes the DMA_BUF_IOCTL_SYNC IOCTL to flush buffers dirtied by the CPU. If that is not done this way then that would be a *major* security issue, but I guess that this isn't the issue here.
What the drivers do more likely is that they use the vmap interface to access the DMA-buf with the CPU inside the kernel. Correct?
In this case dma_buf_begin_cpu_access() and dma_buf_end_cpu_access() should be called to properly frame that access.
That seems to be added in patch #2, but I absolutely can't judge if that is correct or not since at the same time you speak about userptr access and the code really looks a bit like spaghetti.
Regards, Christian.
This follows the per-queue flag proposed here: https://lists.openwall.net/linux-kernel/2024/06/20/236
Based on Linux 7.3. Tests cover the same code on these earlier bases:
Pi 400, 7.3-rc4, all four patches: eight 640x480 YUYV frames per run, imported CMA DMA-BUFs with a DRM device mapping:
Path Runs Stale frames UVC, vb2-vmalloc 12 0/96 vivid, vb2-vmalloc 12 0/96 vivid, vb2-dma-contig 12 0/96
All six lifecycle cases passed with both vivid allocators. Read-only output USERPTR passed. The test added no warnings or failed CPU-access callbacks. A control without the DRM mapping found 4/16 stale frames.
SAM9X75 (ARMv5), 6.18 backport of all four patches: the baseline PREPARE_BUF/REMOVE_BUFS imbalance was fixed. USERPTR and six lifecycle cases passed. All 128 vivid and 96 UVC frames matched RAM, with 100/100 begin/end calls. The baseline was already coherent.
BeagleV Ahead (RISC-V), 7.3-rc7, patches 1, 2 and 4: read-only USERPTR, six traced lifecycle cases and 60 repeats passed with balanced callbacks and no kernel diagnostics. A vendor 5.10 backport of patches 2 and 3 captured 96 UVC frames without stale data, with 100/100 begin/end calls. Its baseline was already coherent.
Karl Mehltretter (4): media: videobuf2: finish prepared buffers in VIDIOC_REMOVE_BUFS media: videobuf2: add opt-in DMA-BUF CPU access media: uvcvideo: synchronize imported DMA-BUFs for CPU access media: vivid: synchronize imported DMA-BUFs for CPU access
.../media/common/videobuf2/videobuf2-core.c | 96 ++++++++++++++++++- .../common/videobuf2/videobuf2-dma-contig.c | 5 +- .../media/common/videobuf2/videobuf2-dma-sg.c | 5 +- .../common/videobuf2/videobuf2-vmalloc.c | 5 +- drivers/media/test-drivers/vivid/vivid-core.c | 1 + drivers/media/usb/uvc/uvc_queue.c | 1 + include/media/videobuf2-core.h | 12 ++- 7 files changed, 116 insertions(+), 9 deletions(-)
base-commit: c03c1a14507dfaf8b856c2608f9ac216021fc222