Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

5 participants
3114 discussions

by Benjamin Gaignard

This series of patches fix various issues in STI drm driver. Now HDMI i2c adapter could be selected in device tree and plug detection doesn't use gpio anymore. I also had fix some signal timing problems after testing the driver on more hardware. The remaining patches attemps to simplify the code and prepare the next evolutions like DVO and auxiliary CRTC support The changes could be fetch here: http://git.linaro.org/people/benjamin.gaignard/kernel.git on drm-sti-fixes-2014-12-04 branch Benjamin Gaignard (9): drm: sti: allow to change hdmi ddc i2c adapter drm: sti: remove gpio for HDMI hot plug detection drm: sti: clear all mixer control drm: sti: simplify gdp code drm: sti: remove event lock while disabling vblank drm: sti: fix hdmi avi infoframe drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: fix delay in VTG programming .../devicetree/bindings/gpu/st,stih4xx.txt | 3 +- drivers/gpu/drm/sti/sti_drm_crtc.c | 10 +-- drivers/gpu/drm/sti/sti_gdp.c | 39 ++++----- drivers/gpu/drm/sti/sti_hdmi.c | 84 +++++++++++--------- drivers/gpu/drm/sti/sti_hdmi.h | 6 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +++ drivers/gpu/drm/sti/sti_mixer.h | 1 + drivers/gpu/drm/sti/sti_tvout.c | 92 ++++++++++++---------- drivers/gpu/drm/sti/sti_vtg.c | 25 +++++- 9 files changed, 160 insertions(+), 109 deletions(-) -- 1.9.1

10 years, 11 months

[PATCH v2 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

by Marek Szyprowski

Hello Everyone, This is yet another attempt to finally make Exynos SYSMMU driver fully integrated with DMA-mapping subsystem. Previous approach is available here: https://lkml.org/lkml/2014/8/5/183 I meantime, there have been a discussion about the way the iommu driver should be integrated with dma-mapping subsystem, which resulted in "[RFC PATCH v3 0/7] Introduce automatic DMA configuration for IOMMU masters" patches prepared by Will Deacon: http://www.spinics.net/lists/arm-kernel/msg362076.html Those patches removed the need to use bus-specific notifiers for initialization. Main changes since previous version of my patches: 1. rebased onto "[RFC PATCH v3 0/7] Introduce automatic DMA configuration for IOMMU masters" patches, changed initialization from bus notifiers to DT related callbacks 2. removed support for separate IO address spaces - this will be discussed separately after the basic support gets merged 3. removed support for power domain notifier-based runtime power management - this also will be discussed separately later I hope that the driver with above changes will be easier to be merged to v3.18. Best regards Marek Szyprowski Samsung R&D Institute Poland Patch summary: Marek Szyprowski (18): arm: dma-mapping: arm_iommu_attach_device: automatically set max_seg_size arm: exynos: bind power domains earlier, on device creation drm: exynos: detach from default dma-mapping domain on init clk: exynos: add missing smmu_g2d clock and update comments ARM: DTS: Exynos4: add System MMU nodes iommu: exynos: don't read version register on every tlb operation iommu: exynos: remove unused functions iommu: exynos: remove useless spinlock iommu: exynos: refactor function parameters to simplify code iommu: exynos: remove unused functions, part 2 iommu: exynos: remove useless device_add/remove callbacks iommu: exynos: add support for binding more than one sysmmu to master device iommu: exynos: add support for runtime_pm iommu: exynos: rename variables to reflect their purpose iommu: exynos: document internal structures iommu: exynos: remove excessive includes and sort others alphabetically iommu: exynos: init from dt-specific callback instead of initcall iommu: exynos: add callback for initializing devices from device tree arch/arm/boot/dts/exynos4.dtsi | 117 +++++++ arch/arm/boot/dts/exynos4210.dtsi | 23 ++ arch/arm/boot/dts/exynos4x12.dtsi | 82 +++++ arch/arm/mach-exynos/pm_domains.c | 12 +- arch/arm/mm/dma-mapping.c | 16 + drivers/clk/samsung/clk-exynos4.c | 1 + drivers/gpu/drm/exynos/exynos_drm_iommu.c | 3 + drivers/iommu/exynos-iommu.c | 494 ++++++++++++++---------------- include/dt-bindings/clock/exynos4.h | 10 +- 9 files changed, 483 insertions(+), 275 deletions(-) -- 1.9.2

11 years

[PATCH v2 0/3] CMA & device tree, another approach

by Marek Szyprowski

Hello, This is another approach to finish support for reserved memory regions defined in device tree. Previous attempts (http://lists.linaro.org/pipermail/linaro-mm-sig/2014-February/003738.html and https://lkml.org/lkml/2014/7/14/108) ended in merging parts of the code and documentation. Merged patches allow to reserve memory, but there is still no reserved memory drivers nor any code that actually uses reserved memory regions. The final conclusion from the above mentioned threads is that there is no automated reserved memory initialization. All drivers that want to use reserved memory, should initialize it on their own. This patch series provides two driver for reserved memory regions (one based on CMA and one based on dma_coherent allocator). The main improvement comparing to the previous version is removal of automated reserved memory for every device and support for named memory regions. Those patches are for merging, rebased on top of recent linux-next tree. Best regards Marek Szyprowski Samsung R&D Institute Poland Changes since v1 (https://lkml.org/lkml/2014/8/26/339): - removed patches for named reserved regions - they will be discussed separately - added a check for 'no-map' property to dma coherent allocator (suggested by Laura Abbott) - removed example code for s5p-mfc driver Changes since '[PATCH v2 RESEND 0/4] CMA & device tree, once again' version: (https://lkml.org/lkml/2014/7/14/108) - added return error value to of_reserved_mem_device_init() - added support for named memory regions (so more than one region can be defined per device) - added usage example - converted custom reserved memory code used by s5p-mfc driver to the generic reserved memory handling code Patch summary: Marek Szyprowski (3): drivers: of: add return value to of_reserved_mem_device_init drivers: dma-coherent: add initialization from device tree drivers: dma-contiguous: add initialization from device tree drivers/base/dma-coherent.c | 145 ++++++++++++++++++++++++++++++++++------ drivers/base/dma-contiguous.c | 71 ++++++++++++++++++++ drivers/of/of_reserved_mem.c | 3 +- include/linux/cma.h | 3 + include/linux/of_reserved_mem.h | 9 ++- mm/cma.c | 62 ++++++++++++++--- 6 files changed, 259 insertions(+), 34 deletions(-) -- 1.9.2

11 years

[PATCH] drm: sti: remove gpio for HDMI hot plug detection

by Benjamin Gaignard

gpio used for HDMI hot plug detection is useless, HDMI_STI register contains an hot plug detection status bit. Fix binding documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- Documentation/devicetree/bindings/gpu/st,stih4xx.txt | 2 -- drivers/gpu/drm/sti/sti_hdmi.c | 11 ++--------- drivers/gpu/drm/sti/sti_hdmi.h | 5 +++-- 3 files changed, 5 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 8885d9e..32cfc7b 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -68,7 +68,6 @@ STMicroelectronics stih4xx platforms number of clocks may depend of the SoC type. - clock-names: names of the clocks listed in clocks property in the same order. - - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. - ddc: phandle of an I2C controller used for DDC EDID probing sti-hda: @@ -174,7 +173,6 @@ Example: interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", "audio"; clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; - hdmi,hpd-gpio = <&PIO2 5>; }; sti-hda@fe85a000 { diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index 7673189..09f39c5 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -130,8 +130,7 @@ static irqreturn_t hdmi_irq_thread(int irq, void *arg) /* Hot plug/unplug IRQ */ if (hdmi->irq_status & HDMI_INT_HOT_PLUG) { - /* read gpio to get the status */ - hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + hdmi->hpd = readl(hdmi->regs + HDMI_STA) & HDMI_STA_HOT_PLUG; if (hdmi->drm_dev) drm_helper_hpd_irq_event(hdmi->drm_dev); } @@ -767,13 +766,7 @@ static int sti_hdmi_probe(struct platform_device *pdev) return PTR_ERR(hdmi->clk_audio); } - hdmi->hpd_gpio = of_get_named_gpio(np, "hdmi,hpd-gpio", 0); - if (hdmi->hpd_gpio < 0) { - DRM_ERROR("Failed to get hdmi hpd-gpio\n"); - return -EIO; - } - - hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + hdmi->hpd = readl(hdmi->regs + HDMI_STA) & HDMI_STA_HOT_PLUG; init_waitqueue_head(&hdmi->wait_event); diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index d00a3e0..3d22390 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -14,6 +14,9 @@ #define HDMI_STA 0x0010 #define HDMI_STA_DLL_LCK BIT(5) +#define HDMI_STA_HOT_PLUG_SHIFT 4 +#define HDMI_STA_HOT_PLUG (1 << HDMI_STA_HOT_PLUG_SHIFT) + struct sti_hdmi; struct hdmi_phy_ops { @@ -37,7 +40,6 @@ struct hdmi_phy_ops { * @irq_status: interrupt status register * @phy_ops: phy start/stop operations * @enabled: true if hdmi is enabled else false - * @hpd_gpio: hdmi hot plug detect gpio number * @hpd: hot plug detect status * @wait_event: wait event * @event_received: wait event status @@ -57,7 +59,6 @@ struct sti_hdmi { u32 irq_status; struct hdmi_phy_ops *phy_ops; bool enabled; - int hpd_gpio; bool hpd; wait_queue_head_t wait_event; bool event_received; -- 1.9.1

11 years

[PATCH] drm: sti: allow to change hdmi ddc i2c adapter

by Benjamin Gaignard

Depending of the board configuration i2c for ddc could change, this patch allow to use a phandle to specify which i2c controller to use. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- .../devicetree/bindings/gpu/st,stih4xx.txt | 1 + drivers/gpu/drm/sti/sti_hdmi.c | 40 +++++++++++++++------- drivers/gpu/drm/sti/sti_hdmi.h | 1 + 3 files changed, 29 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 2d150c3..8885d9e 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -69,6 +69,7 @@ STMicroelectronics stih4xx platforms - clock-names: names of the clocks listed in clocks property in the same order. - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. + - ddc: phandle of an I2C controller used for DDC EDID probing sti-hda: Required properties: diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index ef93156..7673189 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -481,17 +481,15 @@ static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = { static int sti_hdmi_connector_get_modes(struct drm_connector *connector) { - struct i2c_adapter *i2c_adap; + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + struct sti_hdmi *hdmi = hdmi_connector->hdmi; struct edid *edid; int count; DRM_DEBUG_DRIVER("\n"); - i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - goto fail; - - edid = drm_get_edid(connector, i2c_adap); + edid = drm_get_edid(connector, hdmi->ddc_adapt); if (!edid) goto fail; @@ -604,29 +602,38 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data) struct sti_hdmi_connector *connector; struct drm_connector *drm_connector; struct drm_bridge *bridge; - struct i2c_adapter *i2c_adap; + struct device_node *ddc; int err; - i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - return -EPROBE_DEFER; + ddc = of_parse_phandle(dev->of_node, "ddc", 0); + if (ddc) { + hdmi->ddc_adapt = of_find_i2c_adapter_by_node(ddc); + if (!hdmi->ddc_adapt) { + err = -EPROBE_DEFER; + of_node_put(ddc); + return err; + } + + of_node_put(ddc); + } /* Set the drm device handle */ hdmi->drm_dev = drm_dev; encoder = sti_hdmi_find_encoder(drm_dev); if (!encoder) - return -ENOMEM; + goto err_adapt; connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL); if (!connector) - return -ENOMEM; + goto err_adapt; + connector->hdmi = hdmi; bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL); if (!bridge) - return -ENOMEM; + goto err_adapt; bridge->driver_private = hdmi; drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs); @@ -663,6 +670,8 @@ err_sysfs: err_connector: drm_bridge_cleanup(bridge); drm_connector_cleanup(drm_connector); +err_adapt: + put_device(&hdmi->ddc_adapt->dev); return -EINVAL; } @@ -789,6 +798,11 @@ static int sti_hdmi_probe(struct platform_device *pdev) static int sti_hdmi_remove(struct platform_device *pdev) { + struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev); + + if (hdmi->ddc_adapt) + put_device(&hdmi->ddc_adapt->dev); + component_del(&pdev->dev, &sti_hdmi_ops); return 0; } diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index 61bec65..d00a3e0 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -62,6 +62,7 @@ struct sti_hdmi { wait_queue_head_t wait_event; bool event_received; struct reset_control *reset; + struct i2c_adapter *ddc_adapt; }; u32 hdmi_read(struct sti_hdmi *hdmi, int offset); -- 1.9.1

11 years

[PATCH] drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}

by Benjamin Gaignard

Make sure that vblank is enabled when crtc commit is call. Replace drm_vblank_off() by drm_crtc_vblank_off() Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- drivers/gpu/drm/sti/sti_drm_crtc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sti/sti_drm_crtc.c b/drivers/gpu/drm/sti/sti_drm_crtc.c index d2ae0c0..38c4799 100644 --- a/drivers/gpu/drm/sti/sti_drm_crtc.c +++ b/drivers/gpu/drm/sti/sti_drm_crtc.c @@ -61,6 +61,8 @@ static void sti_drm_crtc_commit(struct drm_crtc *crtc) /* Enable layer on mixer */ if (sti_mixer_set_layer_status(mixer, layer, true)) DRM_ERROR("Can not enable layer at mixer\n"); + + drm_crtc_vblank_on(crtc); } static bool sti_drm_crtc_mode_fixup(struct drm_crtc *crtc, @@ -221,7 +223,7 @@ static void sti_drm_crtc_disable(struct drm_crtc *crtc) /* Then disable layer itself */ sti_layer_disable(layer); - drm_vblank_off(crtc->dev, mixer->id); + drm_crtc_vblank_off(crtc); /* Disable pixel clock and compo IP clocks */ if (mixer->id == STI_MIXER_MAIN) { -- 1.9.1

11 years

Ideal Android device to do Audio Multimedia Android stuff

by Viswanath Puttagunta

Hi All, I lost the only Android Tablet that I had to hack around and in the market for new Android Tablet. Needs to be stuff I can buy personally, so Juno / Vexpress is out the window. What would you recommend I buy? Below are specific use cases i. Work on NEON optimizations for Audio libraries (Vorbis, FLAC etc) in **Android** context. ii. So, would obviously like to have a reference Android baseline build that is actively used in Linaro. Is anyone in LMG using builds available for Nexus10 <http://releases.linaro.org/14.09/android/nexus10> and Nexus7 <http://releases.linaro.org/14.09/android/nexus7-2013> actively right now? How official are these builds? Regards, Vish (Viswanath Puttagunta) Cell: 972-342-0205 Technical Program Manager Member Services, Linaro

11 years

Install Ubuntu on Samsung Chromebook 2

by Viswanath Puttagunta

Hi All, Does any one have instructions to install Ubuntu natively on Samsung Chromebook2 that worked for you? Regards, Vish (Viswanath Puttagunta) Cell: 972-342-0205 Technical Program Manager Member Services, Linaro

11 years, 1 month

Changing PAGE_ALLOC_COSTLY_ORDER from 3 to 2

by Pintu Kumar

Hi, I wanted to know about the impact of changing PAGE_ALLOC_COSTLY_ORDER value from 3 to 2. This macro is defined in include/linux/mmzone.h #define PAGE_ALLOC_COSTLY_ORDER 3 As I know this value should never be changed irrespective of the type of the system. Is it good to change this value for RAM size: 512MB, 256MB or 128MB? If anybody have changed this value and experience any kind of problem or benefits please let us know. We noticed that for one of the Android product with 512MB RAM, the PAGE_ALLOC_COSTLY_ORDER was set to 2. We could not figure out why this value was decreased from 3 to 2. As per my analysis, I observed that kmalloc fails little early, if we change this value to 2. This is also visible from the _slowpath_ in page_alloc.c Apart from this we could not find any other impact. If anybody is aware of any other impact, please let us know. Thank you! Regards, Pintu Kumar

11 years, 1 month

Re: [Linaro-mm-sig] Question on UAPI for fences

by Daniel Vetter

On Sun, Sep 14, 2014 at 12:36:43PM +0200, Christian König wrote: > Yeah, right. Providing the fd to reassign to a fence would indeed reduce the > create/close overhead. > > But it would still be more overhead than for example a simple on demand > growing ring buffer which then uses 64bit sequence numbers in userspace to > refer to a fence in the kernel. > > Apart from that I'm pretty sure that when we do the syncing completely in > userspace we need more fences open at the same time than fds are available > by default. If you do the syncing completely in userspace you don't need kernel fences at all. Kernel fences are only required if you sync with a different process (where the pure userspace syncing might not work out) or with different devices. tbh I don't see any use-case at all where you'd need 10k such fences. That means your driver gets to deal with 2 kinds of fences, but so be it. Since not using fds for cross-device or cross-process syncing imo just doesn't make sense, so that one pretty much will have to stick. > As long as our internal handle or sequence based fence are easily > convertible to a fence fd I actually don't really see a problem with that. > Going to hack that approach into my prototype and then we can see how bad > the code looks after all. My plan for i915 is to start out with fd fences only, and once we have some clarity on the exact requirements probably add some pure userspace-controlled fences for tightly coupled stuff. Those might be fully internal to the opencl userspace driver though and never get out of there, ever. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch

11 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig