linaro-kernel

linaro-kernel@lists.linaro.org

10095 discussions

[PATCH 1/4] ASoC: pcm3008: Remove noisy version print

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> The version number has never been updated and the printk isn't based on any interaction with the device. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/pcm3008.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c index f2a6282..32e5a59 100644 --- a/sound/soc/codecs/pcm3008.c +++ b/sound/soc/codecs/pcm3008.c @@ -28,8 +28,6 @@ #include "pcm3008.h" -#define PCM3008_VERSION "0.2" - #define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000) @@ -64,8 +62,6 @@ static int pcm3008_soc_probe(struct snd_soc_codec *codec) struct pcm3008_setup_data *setup = codec->dev->platform_data; int ret = 0; - printk(KERN_INFO "PCM3008 SoC Audio Codec %s\n", PCM3008_VERSION); - /* DEM1 DEM0 DE-EMPHASIS_MODE * Low Low De-emphasis 44.1 kHz ON * Low High De-emphasis OFF -- 1.8.3.2

11 years, 11 months

[PATCH 1/9] spi: Support transfer speed checking in the core

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Allow drivers to avoid implementing their own checks for simple rates by specifying the limits in the master structure. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/spi/spi.c | 7 +++++++ include/linux/spi/spi.h | 6 ++++++ 2 files changed, 13 insertions(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 978dda2..a52f166 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1387,6 +1387,13 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) BIT(xfer->bits_per_word - 1))) return -EINVAL; } + + if (xfer->speed_hz && master->min_speed_hz && + xfer->speed_hz < master->min_speed_hz) + return -EINVAL; + if (xfer->speed_hz && master->max_speed_hz && + xfer->speed_hz > master->max_speed_hz) + return -EINVAL; } message->spi = spi; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 28e440b..cdf6681 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -233,6 +233,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * suported. If set, the SPI core will reject any transfer with an * unsupported bits_per_word. If not set, this value is simply ignored, * and it's up to the individual driver to perform any validation. + * @min_speed_hz: Lowest supported transfer speed + * @max_speed_hz: Highest supported transfer speed * @flags: other constraints relevant to this driver * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for SPI bus locking @@ -312,6 +314,10 @@ struct spi_master { #define SPI_BIT_MASK(bits) (((bits) == 32) ? ~0UL : (BIT(bits) - 1)) #define SPI_BPW_RANGE_MASK(min, max) (SPI_BIT_MASK(max) - SPI_BIT_MASK(min - 1)) + /* limits on transfer speed */ + u32 min_speed_hz; + u32 max_speed_hz; + /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ -- 1.8.3.2

11 years, 11 months

[PATCH] of/platform: Staticize of_platform_device_create_pdata()

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> It is not used outside of this file so doesn't need to be in the global namespace. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/of/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/platform.c b/drivers/of/platform.c index e0a6514..b0d1ff8 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -196,7 +196,7 @@ EXPORT_SYMBOL(of_device_alloc); * Returns pointer to created platform device, or NULL if a device was not * registered. Unavailable devices will not get registered. */ -struct platform_device *of_platform_device_create_pdata( +static struct platform_device *of_platform_device_create_pdata( struct device_node *np, const char *bus_id, void *platform_data, -- 1.8.3.2

11 years, 12 months

[PATCH] regulator: core: Drop references on supply regulator when unregistering

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/regulator/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index e8604be..cfb17e6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3827,8 +3827,11 @@ void regulator_unregister(struct regulator_dev *rdev) if (rdev == NULL) return; - if (rdev->supply) + if (rdev->supply) { + while (rdev->use_count--) + regulator_disable(rdev->supply); regulator_put(rdev->supply); + } mutex_lock(&regulator_list_mutex); debugfs_remove_recursive(rdev->debugfs); flush_work(&rdev->disable_work.work); -- 1.8.3.2

11 years, 12 months

[PATCH] regulator: build: Sort Kconfig

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Reduces merge issues if nothing else. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/regulator/Kconfig | 244 ++++++++++++++++++++++----------------------- drivers/regulator/Makefile | 2 +- 2 files changed, 123 insertions(+), 123 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f1e6ad9..759b601 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -64,15 +64,11 @@ config REGULATOR_USERSPACE_CONSUMER If unsure, say no. -config REGULATOR_GPIO - tristate "GPIO regulator support" - depends on GPIOLIB +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM860X=y help - This driver provides support for regulators that can be - controlled via gpios. - It is capable of supporting current and voltage regulators - and the platform has to provide a mapping of GPIO-states - to target volts/amps. + This driver supports 88PM8607 voltage regulator chips. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" @@ -81,6 +77,14 @@ config REGULATOR_AD5398 This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. +config REGULATOR_ANATOP + tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on MFD_SYSCON + help + Say y here to support Freescale i.MX on-chip ANATOP LDOs + regulators. It is recommended that this option be + enabled on i.MX6 platform. + config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE @@ -88,6 +92,22 @@ config REGULATOR_AAT2870 If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. +config REGULATOR_AB3100 + tristate "ST-Ericsson AB3100 Regulator functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + These regulators correspond to functionality in the + AB3100 analog baseband dealing with power regulators + for the system. + +config REGULATOR_AB8500 + bool "ST-Ericsson AB8500 Power Regulators" + depends on AB8500_CORE + help + This driver supports the regulators found on the ST-Ericsson mixed + signal AB8500 PMIC + config REGULATOR_ARIZONA tristate "Wolfson Arizona class devices" depends on MFD_ARIZONA @@ -96,6 +116,13 @@ config REGULATOR_ARIZONA Support for the regulators found on Wolfson Arizona class devices. +config REGULATOR_AS3711 + tristate "AS3711 PMIC" + depends on MFD_AS3711 + help + This driver provides support for the voltage regulators on the + AS3711 PMIC + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X @@ -120,6 +147,17 @@ config REGULATOR_DA9055 This driver can also be built as a module. If so, the module will be called da9055-regulator. +config REGULATOR_DBX500_PRCMU + bool + +config REGULATOR_DB8500_PRCMU + bool "ST-Ericsson DB8500 Voltage Domain Regulators" + depends on MFD_DB8500_PRCMU + select REGULATOR_DBX500_PRCMU + help + This driver supports the voltage domain regulators controlled by the + DB8500 PRCMU + config REGULATOR_FAN53555 tristate "Fairchild FAN53555 Regulator" depends on I2C @@ -131,44 +169,57 @@ config REGULATOR_FAN53555 input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. -config REGULATOR_ANATOP - tristate "Freescale i.MX on-chip ANATOP LDO regulators" - depends on MFD_SYSCON +config REGULATOR_GPIO + tristate "GPIO regulator support" + depends on GPIOLIB help - Say y here to support Freescale i.MX on-chip ANATOP LDOs - regulators. It is recommended that this option be - enabled on i.MX6 platform. + This driver provides support for regulators that can be + controlled via gpios. + It is capable of supporting current and voltage regulators + and the platform has to provide a mapping of GPIO-states + to target volts/amps. -config REGULATOR_MC13XXX_CORE - tristate +config REGULATOR_ISL6271A + tristate "Intersil ISL6271A Power regulator" + depends on I2C + help + This driver supports ISL6271A voltage regulator chip. -config REGULATOR_MC13783 - tristate "Freescale MC13783 regulator driver" - depends on MFD_MC13783 - select REGULATOR_MC13XXX_CORE +config REGULATOR_LP3971 + tristate "National Semiconductors LP3971 PMIC regulator driver" + depends on I2C help - Say y here to support the regulators found on the Freescale MC13783 - PMIC. + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3971 PMIC -config REGULATOR_MC13892 - tristate "Freescale MC13892 regulator driver" - depends on MFD_MC13XXX - select REGULATOR_MC13XXX_CORE +config REGULATOR_LP3972 + tristate "National Semiconductors LP3972 PMIC regulator driver" + depends on I2C help - Say y here to support the regulators found on the Freescale MC13892 - PMIC. + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3972 PMIC -config REGULATOR_ISL6271A - tristate "Intersil ISL6271A Power regulator" +config REGULATOR_LP872X + bool "TI/National Semiconductor LP8720/LP8725 voltage regulators" + depends on I2C=y + select REGMAP_I2C + help + This driver supports LP8720/LP8725 PMIC + +config REGULATOR_LP8755 + tristate "TI LP8755 High Performance PMU driver" depends on I2C + select REGMAP_I2C help - This driver supports ISL6271A voltage regulator chip. + This driver supports LP8755 High Performance PMU driver. This + chip contains six step-down DC/DC converters which can support + 9 mode multiphase configuration. -config REGULATOR_88PM8607 - bool "Marvell 88PM8607 Power regulators" - depends on MFD_88PM860X=y +config REGULATOR_LP8788 + bool "TI LP8788 Power Regulators" + depends on MFD_LP8788 help - This driver supports 88PM8607 voltage regulator chips. + This driver supports LP8788 voltage regulator chip. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" @@ -259,48 +310,43 @@ config REGULATOR_MAX77693 and one current regulator 'CHARGER'. This is suitable for Exynos-4x12 chips. -config REGULATOR_PCAP - tristate "Motorola PCAP2 regulator driver" - depends on EZX_PCAP - help - This driver provides support for the voltage regulators of the - PCAP2 PMIC. +config REGULATOR_MC13XXX_CORE + tristate -config REGULATOR_LP3971 - tristate "National Semiconductors LP3971 PMIC regulator driver" - depends on I2C +config REGULATOR_MC13783 + tristate "Freescale MC13783 regulator driver" + depends on MFD_MC13783 + select REGULATOR_MC13XXX_CORE help - Say Y here to support the voltage regulators and convertors - on National Semiconductors LP3971 PMIC + Say y here to support the regulators found on the Freescale MC13783 + PMIC. -config REGULATOR_LP3972 - tristate "National Semiconductors LP3972 PMIC regulator driver" - depends on I2C +config REGULATOR_MC13892 + tristate "Freescale MC13892 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE help - Say Y here to support the voltage regulators and convertors - on National Semiconductors LP3972 PMIC + Say y here to support the regulators found on the Freescale MC13892 + PMIC. -config REGULATOR_LP872X - bool "TI/National Semiconductor LP8720/LP8725 voltage regulators" - depends on I2C=y - select REGMAP_I2C +config REGULATOR_PALMAS + tristate "TI Palmas PMIC Regulators" + depends on MFD_PALMAS help - This driver supports LP8720/LP8725 PMIC + If you wish to control the regulators on the Palmas series of + chips say Y here. This will enable support for all the software + controllable SMPS/LDO regulators. -config REGULATOR_LP8755 - tristate "TI LP8755 High Performance PMU driver" - depends on I2C - select REGMAP_I2C - help - This driver supports LP8755 High Performance PMU driver. This - chip contains six step-down DC/DC converters which can support - 9 mode multiphase configuration. + The regulators available on Palmas series chips vary depending + on the muxing. This is handled automatically in the driver by + reading the mux info from OTP. -config REGULATOR_LP8788 - bool "TI LP8788 Power Regulators" - depends on MFD_LP8788 +config REGULATOR_PCAP + tristate "Motorola PCAP2 regulator driver" + depends on EZX_PCAP help - This driver supports LP8788 voltage regulator chip. + This driver provides support for the voltage regulators of the + PCAP2 PMIC. config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" @@ -335,44 +381,15 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. -config REGULATOR_AB3100 - tristate "ST-Ericsson AB3100 Regulator functions" - depends on AB3100_CORE - default y if AB3100_CORE - help - These regulators correspond to functionality in the - AB3100 analog baseband dealing with power regulators - for the system. - -config REGULATOR_AB8500 - bool "ST-Ericsson AB8500 Power Regulators" - depends on AB8500_CORE - help - This driver supports the regulators found on the ST-Ericsson mixed - signal AB8500 PMIC - -config REGULATOR_DBX500_PRCMU - bool - -config REGULATOR_DB8500_PRCMU - bool "ST-Ericsson DB8500 Voltage Domain Regulators" - depends on MFD_DB8500_PRCMU - select REGULATOR_DBX500_PRCMU - help - This driver supports the voltage domain regulators controlled by the - DB8500 PRCMU - -config REGULATOR_PALMAS - tristate "TI Palmas PMIC Regulators" - depends on MFD_PALMAS +config REGULATOR_TI_ABB + bool "TI Adaptive Body Bias on-chip LDO" + depends on ARCH_OMAP help - If you wish to control the regulators on the Palmas series of - chips say Y here. This will enable support for all the software - controllable SMPS/LDO regulators. - - The regulators available on Palmas series chips vary depending - on the muxing. This is handled automatically in the driver by - reading the mux info from OTP. + Select this option to support Texas Instruments' on-chip Adaptive Body + Bias (ABB) LDO regulators. It is recommended that this option be + enabled on required TI SoC. Certain Operating Performance Points + on TI SoCs may be unstable without enabling this as it provides + device specific optimized bias to allow/optimize functionality. config REGULATOR_TPS51632 tristate "TI TPS51632 Power Regulator" @@ -481,16 +498,6 @@ config REGULATOR_TWL4030 This driver supports the voltage regulators provided by this family of companion chips. -config REGULATOR_TI_ABB - bool "TI Adaptive Body Bias on-chip LDO" - depends on ARCH_OMAP - help - Select this option to support Texas Instruments' on-chip Adaptive Body - Bias (ABB) LDO regulators. It is recommended that this option be - enabled on required TI SoC. Certain Operating Performance Points - on TI SoCs may be unstable without enabling this as it provides - device specific optimized bias to allow/optimize functionality. - config REGULATOR_VEXPRESS tristate "Versatile Express regulators" depends on VEXPRESS_CONFIG @@ -526,12 +533,5 @@ config REGULATOR_WM8994 This driver provides support for the voltage regulators on the WM8994 CODEC. -config REGULATOR_AS3711 - tristate "AS3711 PMIC" - depends on MFD_AS3711 - help - This driver provides support for the voltage regulators on the - AS3711 PMIC - endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index ba4a3cf..d240772 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o +obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o @@ -64,7 +65,6 @@ obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o -obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o -- 1.8.3.2

11 years, 12 months

[PATCH] spi/bitbang: Use core message pump

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Convert drivers using bitbang to use the core mesasge pump infrastructure, saving some code and meaning that these drivers get to take advantage of work done on improving the core implementation. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/spi/spi-bitbang.c | 97 ++++++++++++----------------------------- include/linux/spi/spi_bitbang.h | 4 -- 2 files changed, 28 insertions(+), 73 deletions(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 8b8487c..282210f 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -255,6 +255,21 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) * Drivers can provide word-at-a-time i/o primitives, or provide * transfer-at-a-time ones to leverage dma or fifo hardware. */ + +static int spi_bitbang_prepare_hardware(struct spi_master *spi) +{ + struct spi_bitbang *bitbang; + unsigned long flags; + + bitbang = spi_master_get_devdata(spi); + + spin_lock_irqsave(&bitbang->lock, flags); + bitbang->busy = 1; + spin_unlock_irqrestore(&bitbang->lock, flags); + + return 0; +} + static int spi_bitbang_transfer_one(struct spi_device *spi, struct spi_message *m) { @@ -361,51 +376,18 @@ static int spi_bitbang_transfer_one(struct spi_device *spi, return status; } -static void bitbang_work(struct work_struct *work) -{ - struct spi_bitbang *bitbang = - container_of(work, struct spi_bitbang, work); - unsigned long flags; - struct spi_message *m, *_m; - - spin_lock_irqsave(&bitbang->lock, flags); - bitbang->busy = 1; - list_for_each_entry_safe(m, _m, &bitbang->queue, queue) { - list_del(&m->queue); - spin_unlock_irqrestore(&bitbang->lock, flags); - - spi_bitbang_transfer_one(m->spi, m); - - spin_lock_irqsave(&bitbang->lock, flags); - } - bitbang->busy = 0; - spin_unlock_irqrestore(&bitbang->lock, flags); -} - -/** - * spi_bitbang_transfer - default submit to transfer queue - */ -static int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +static int spi_bitbang_unprepare_hardware(struct spi_master *spi) { - struct spi_bitbang *bitbang; + struct spi_bitbang *bitbang; unsigned long flags; - int status = 0; - - m->actual_length = 0; - m->status = -EINPROGRESS; - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_master_get_devdata(spi); spin_lock_irqsave(&bitbang->lock, flags); - if (!spi->max_speed_hz) - status = -ENETDOWN; - else { - list_add_tail(&m->queue, &bitbang->queue); - queue_work(bitbang->workqueue, &bitbang->work); - } + bitbang->busy = 0; spin_unlock_irqrestore(&bitbang->lock, flags); - return status; + return 0; } /*----------------------------------------------------------------------*/ @@ -436,20 +418,22 @@ static int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) int spi_bitbang_start(struct spi_bitbang *bitbang) { struct spi_master *master = bitbang->master; - int status; if (!master || !bitbang->chipselect) return -EINVAL; - INIT_WORK(&bitbang->work, bitbang_work); spin_lock_init(&bitbang->lock); - INIT_LIST_HEAD(&bitbang->queue); if (!master->mode_bits) master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - if (!master->transfer) - master->transfer = spi_bitbang_transfer; + if (master->transfer || master->transfer_one_message) + return -EINVAL; + + master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; + master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; + master->transfer = spi_bitbang_transfer_one; + if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; @@ -462,32 +446,11 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) } } else if (!master->setup) return -EINVAL; - if (master->transfer == spi_bitbang_transfer && - !bitbang->setup_transfer) - return -EINVAL; - - /* this task is the only thing to touch the SPI bits */ - bitbang->busy = 0; - bitbang->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (bitbang->workqueue == NULL) { - status = -EBUSY; - goto err1; - } /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices */ - status = spi_register_master(master); - if (status < 0) - goto err2; - - return status; - -err2: - destroy_workqueue(bitbang->workqueue); -err1: - return status; + return spi_register_master(master); } EXPORT_SYMBOL_GPL(spi_bitbang_start); @@ -498,10 +461,6 @@ int spi_bitbang_stop(struct spi_bitbang *bitbang) { spi_unregister_master(bitbang->master); - WARN_ON(!list_empty(&bitbang->queue)); - - destroy_workqueue(bitbang->workqueue); - return 0; } EXPORT_SYMBOL_GPL(spi_bitbang_stop); diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index b5aa215..daebaba 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -4,11 +4,7 @@ #include <linux/workqueue.h> struct spi_bitbang { - struct workqueue_struct *workqueue; - struct work_struct work; - spinlock_t lock; - struct list_head queue; u8 busy; u8 use_dma; u8 flags; /* extra spi->mode support */ -- 1.8.3.2

11 years, 12 months

[PATCH] spi/drivers: Enable build of drivers with COMPILE_TEST

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Enable the build of drivers which don't have any real build time dependency on their architecture or platform with COMPILE_TEST, providing better build time coverage. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/spi/Kconfig | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 175491f..d39c998 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -70,14 +70,14 @@ config SPI_ATH79 config SPI_ATMEL tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) + depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) help This selects a driver for the Atmel SPI Controller, present on many AT32 (AVR32) and AT91 (ARM) chips. config SPI_BCM2835 tristate "BCM2835 SPI controller" - depends on ARCH_BCM2835 + depends on ARCH_BCM2835 || COMPILE_TEST help This selects a driver for the Broadcom BCM2835 SPI master. @@ -159,7 +159,7 @@ config SPI_DAVINCI config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" - depends on ARCH_EP93XX + depends on ARCH_EP93XX || COMPILE_TEST help This enables using the Cirrus EP93xx SPI controller in master mode. @@ -191,7 +191,7 @@ config SPI_GPIO config SPI_IMX tristate "Freescale i.MX SPI controllers" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST select SPI_BITBANG default m if IMX_HAVE_PLATFORM_SPI_IMX help @@ -280,20 +280,20 @@ config SPI_OMAP_UWIRE config SPI_OMAP24XX tristate "McSPI driver for OMAP" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || COMPILE_TEST help SPI master controller for OMAP24XX and later Multichannel SPI (McSPI) modules. config SPI_OMAP_100K tristate "OMAP SPI 100K" - depends on ARCH_OMAP850 || ARCH_OMAP730 + depends on ARCH_OMAP850 || ARCH_OMAP730 || COMPILE_TEST help OMAP SPI 100K master controller for omap7xx boards. config SPI_ORION tristate "Orion SPI master" - depends on PLAT_ORION + depends on PLAT_ORION || COMPILE_TEST help This enables using the SPI master controller on the Orion chips. @@ -318,7 +318,7 @@ config SPI_PPC4xx config SPI_PXA2XX_PXADMA bool "PXA2xx SSP legacy PXA DMA API support" - depends on SPI_PXA2XX && ARCH_PXA + depends on (SPI_PXA2XX && ARCH_PXA) || COMPILE_TEST help Enable PXA private legacy DMA API support. Note that this is deprecated in favor of generic DMA engine API. @@ -385,7 +385,7 @@ config SPI_SH_MSIOF config SPI_SH tristate "SuperH SPI controller" - depends on SUPERH + depends on SUPERH || COMPILE_TEST help SPI driver for SuperH SPI blocks. @@ -398,13 +398,13 @@ config SPI_SH_SCI config SPI_SH_HSPI tristate "SuperH HSPI controller" - depends on ARCH_SHMOBILE + depends on ARCH_SHMOBILE || COMPILE_TEST help SPI driver for SuperH HSPI blocks. config SPI_SIRF tristate "CSR SiRFprimaII SPI controller" - depends on ARCH_SIRF + depends on ARCH_SIRF || COMPILE_TEST select SPI_BITBANG help SPI driver for CSR SiRFprimaII SoCs @@ -418,7 +418,7 @@ config SPI_MXS config SPI_TEGRA114 tristate "NVIDIA Tegra114 SPI Controller" - depends on ARCH_TEGRA && TEGRA20_APB_DMA + depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST help SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller is different than the older SoCs SPI controller and also register interface @@ -426,7 +426,7 @@ config SPI_TEGRA114 config SPI_TEGRA20_SFLASH tristate "Nvidia Tegra20 Serial flash Controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST help SPI driver for Nvidia Tegra20 Serial flash Controller interface. The main usecase of this controller is to use spi flash as boot @@ -434,7 +434,7 @@ config SPI_TEGRA20_SFLASH config SPI_TEGRA20_SLINK tristate "Nvidia Tegra20/Tegra30 SLINK Controller" - depends on ARCH_TEGRA && TEGRA20_APB_DMA + depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST help SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. @@ -457,7 +457,7 @@ config SPI_TOPCLIFF_PCH config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" - depends on GPIOLIB && CPU_TX49XX + depends on GPIOLIB && (CPU_TX49XX || COMPILE_TEST) help SPI driver for Toshiba TXx9 MIPS SoCs -- 1.8.3.2

11 years, 12 months

[PATCH] spi/bitbang: Factor out message transfer from message pump loop

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> In order to make it easier to convert to transfer_one_message() lift the code that does the actual message transfer out of the work function that implements the message pump. This should have no functional impact, it's just a simple code motion patch. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/spi/spi-bitbang.c | 199 ++++++++++++++++++++++++---------------------- 1 file changed, 104 insertions(+), 95 deletions(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 495ce0a..8b8487c 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -255,117 +255,126 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) * Drivers can provide word-at-a-time i/o primitives, or provide * transfer-at-a-time ones to leverage dma or fifo hardware. */ -static void bitbang_work(struct work_struct *work) +static int spi_bitbang_transfer_one(struct spi_device *spi, + struct spi_message *m) { - struct spi_bitbang *bitbang = - container_of(work, struct spi_bitbang, work); - unsigned long flags; - struct spi_message *m, *_m; + struct spi_bitbang *bitbang; + unsigned nsecs; + struct spi_transfer *t = NULL; + unsigned tmp; + unsigned cs_change; + int status; + int do_setup = -1; - spin_lock_irqsave(&bitbang->lock, flags); - bitbang->busy = 1; - list_for_each_entry_safe(m, _m, &bitbang->queue, queue) { - struct spi_device *spi; - unsigned nsecs; - struct spi_transfer *t = NULL; - unsigned tmp; - unsigned cs_change; - int status; - int do_setup = -1; + bitbang = spi_master_get_devdata(spi->master); - list_del(&m->queue); - spin_unlock_irqrestore(&bitbang->lock, flags); + /* FIXME this is made-up ... the correct value is known to + * word-at-a-time bitbang code, and presumably chipselect() + * should enforce these requirements too? + */ + nsecs = 100; - /* FIXME this is made-up ... the correct value is known to - * word-at-a-time bitbang code, and presumably chipselect() - * should enforce these requirements too? - */ - nsecs = 100; + tmp = 0; + cs_change = 1; + status = 0; - spi = m->spi; - tmp = 0; - cs_change = 1; - status = 0; + list_for_each_entry (t, &m->transfers, transfer_list) { - list_for_each_entry (t, &m->transfers, transfer_list) { - - /* override speed or wordsize? */ - if (t->speed_hz || t->bits_per_word) - do_setup = 1; - - /* init (-1) or override (1) transfer params */ - if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; - if (do_setup == -1) - do_setup = 0; - } - - /* set up default clock polarity, and activate chip; - * this implicitly updates clock and spi modes as - * previously recorded for this device via setup(). - * (and also deselects any other chip that might be - * selected ...) - */ - if (cs_change) { - bitbang->chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (!t->tx_buf && !t->rx_buf && t->len) { - status = -EINVAL; - break; - } + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; - /* transfer data. the lower level code handles any - * new dma mappings it needs. our caller always gave - * us dma-safe buffers. - */ - if (t->len) { - /* REVISIT dma API still needs a designated - * DMA_ADDR_INVALID; ~0 might be better. - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) - m->actual_length += status; - if (status != t->len) { - /* always report some kind of error */ - if (status >= 0) - status = -EREMOTEIO; + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) break; - } - status = 0; - - /* protocol tweaks before next transfer */ - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) { - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } + if (do_setup == -1) + do_setup = 0; } - m->status = status; - m->complete(m->context); + /* set up default clock polarity, and activate chip; + * this implicitly updates clock and spi modes as + * previously recorded for this device via setup(). + * (and also deselects any other chip that might be + * selected ...) + */ + if (cs_change) { + bitbang->chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. + /* transfer data. the lower level code handles any + * new dma mappings it needs. our caller always gave + * us dma-safe buffers. */ - if (!(status == 0 && cs_change)) { + if (t->len) { + /* REVISIT dma API still needs a designated + * DMA_ADDR_INVALID; ~0 might be better. + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; + status = bitbang->txrx_bufs(spi, t); + } + if (status > 0) + m->actual_length += status; + if (status != t->len) { + /* always report some kind of error */ + if (status >= 0) + status = -EREMOTEIO; + break; + } + status = 0; + + /* protocol tweaks before next transfer */ + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) { + /* sometimes a short mid-message deselect of the chip + * may be needed to terminate a mode or command + */ ndelay(nsecs); bitbang->chipselect(spi, BITBANG_CS_INACTIVE); ndelay(nsecs); } + } + + m->status = status; + m->complete(m->context); + + /* normally deactivate chipselect ... unless no error and + * cs_change has hinted that the next message will probably + * be for this chip too. + */ + if (!(status == 0 && cs_change)) { + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + + return status; +} + +static void bitbang_work(struct work_struct *work) +{ + struct spi_bitbang *bitbang = + container_of(work, struct spi_bitbang, work); + unsigned long flags; + struct spi_message *m, *_m; + + spin_lock_irqsave(&bitbang->lock, flags); + bitbang->busy = 1; + list_for_each_entry_safe(m, _m, &bitbang->queue, queue) { + list_del(&m->queue); + spin_unlock_irqrestore(&bitbang->lock, flags); + + spi_bitbang_transfer_one(m->spi, m); spin_lock_irqsave(&bitbang->lock, flags); } -- 1.8.3.2

11 years, 12 months

[PATCH] spi/bitbang: Unexport spi_bitbang_transfer()

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Currently no drivers use the ability to override spi_bitbang_transfer() and if any started this would make it harder to convert the bitbang code to use transfer_one_message() so remove the export in order to prevent anyone starting. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/spi/spi-bitbang.c | 3 +-- include/linux/spi/spi_bitbang.h | 1 - 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index a63d7da..495ce0a 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -376,7 +376,7 @@ static void bitbang_work(struct work_struct *work) /** * spi_bitbang_transfer - default submit to transfer queue */ -int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +static int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) { struct spi_bitbang *bitbang; unsigned long flags; @@ -398,7 +398,6 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) return status; } -EXPORT_SYMBOL_GPL(spi_bitbang_transfer); /*----------------------------------------------------------------------*/ diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index f987a2b..b5aa215 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -41,7 +41,6 @@ struct spi_bitbang { */ extern int spi_bitbang_setup(struct spi_device *spi); extern void spi_bitbang_cleanup(struct spi_device *spi); -extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); extern int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t); -- 1.8.3.2

11 years, 12 months

[PATCH] ASoC: samsung: Remove obsolete GPIO based DT pinmuxing

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Since the Samsung platforms have moved to pinctrl for pin muxing and that is handled in the core the old GPIO based muxing code can just be removed. Something similar had been submitted by Thomas Abraham back in March but a resubmission following review never happened. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/samsung/i2s.c | 66 +++---------------------------------------------- 1 file changed, 4 insertions(+), 62 deletions(-) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 82ebb1a..7a17346 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1016,52 +1016,6 @@ static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec) return i2s; } -#ifdef CONFIG_OF -static int samsung_i2s_parse_dt_gpio(struct i2s_dai *i2s) -{ - struct device *dev = &i2s->pdev->dev; - int index, gpio, ret; - - for (index = 0; index < 7; index++) { - gpio = of_get_gpio(dev->of_node, index); - if (!gpio_is_valid(gpio)) { - dev_err(dev, "invalid gpio[%d]: %d\n", index, gpio); - goto free_gpio; - } - - ret = gpio_request(gpio, dev_name(dev)); - if (ret) { - dev_err(dev, "gpio [%d] request failed\n", gpio); - goto free_gpio; - } - i2s->gpios[index] = gpio; - } - return 0; - -free_gpio: - while (--index >= 0) - gpio_free(i2s->gpios[index]); - return -EINVAL; -} - -static void samsung_i2s_dt_gpio_free(struct i2s_dai *i2s) -{ - unsigned int index; - for (index = 0; index < 7; index++) - gpio_free(i2s->gpios[index]); -} -#else -static int samsung_i2s_parse_dt_gpio(struct i2s_dai *dai) -{ - return -EINVAL; -} - -static void samsung_i2s_dt_gpio_free(struct i2s_dai *dai) -{ -} - -#endif - static const struct of_device_id exynos_i2s_match[]; static inline int samsung_i2s_get_driver_data(struct platform_device *pdev) @@ -1235,18 +1189,10 @@ static int samsung_i2s_probe(struct platform_device *pdev) pri_dai->sec_dai = sec_dai; } - if (np) { - if (samsung_i2s_parse_dt_gpio(pri_dai)) { - dev_err(&pdev->dev, "Unable to configure gpio\n"); - ret = -EINVAL; - goto err; - } - } else { - if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to configure gpio\n"); - ret = -EINVAL; - goto err; - } + if (i2s_pdata && i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to configure gpio\n"); + ret = -EINVAL; + goto err; } snd_soc_register_component(&pri_dai->pdev->dev, &samsung_i2s_component, @@ -1267,14 +1213,10 @@ static int samsung_i2s_remove(struct platform_device *pdev) { struct i2s_dai *i2s, *other; struct resource *res; - struct s3c_audio_pdata *i2s_pdata = pdev->dev.platform_data; i2s = dev_get_drvdata(&pdev->dev); other = i2s->pri_dai ? : i2s->sec_dai; - if (!i2s_pdata->cfg_gpio && pdev->dev.of_node) - samsung_i2s_dt_gpio_free(i2s->pri_dai); - if (other) { other->pri_dai = NULL; other->sec_dai = NULL; -- 1.8.3.1

12 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel