linaro-kernel

linaro-kernel@lists.linaro.org

10094 discussions

[PATCH V3 0/6] USB: OHCI: more bus glues as separate modules

by Manjunath Goudar

These patches are for separating the SOC On-Chip ohci host controller from ohci-hcd host code into its own driver module. This work is part of enabling multi-platform kernels on ARM; it would be nice to have in 3.11. V2: In patch 5/6 and 6/6: -Set non-standard fields in hc_driver manually, rather than relying on an expanded struct ohci_driver_overrides. -Save orig_ohci_hub_control and orig_ohci_hub_status_data rather than relying on ohci_hub_control and hub_status_data being exported. In patch 1/6 to 4/6 -ohci_setup() has been removed because it is called in .reset member of the ohci_hc_driver structure. V3: In patch 5/6 and 6/6: -ohci_setup() has been removed because it is called in .reset member of the ohci_hc_driver structure. In patch 5/6: -The ohci_restart() function is not required in current scenario, only discarding connection state of integrated transceivers is sufficient, for this directly handling ohci->hc_control. In patch 2/6 : -rewritten if (config->otg || config->rwc) block statements into two separate 'if blocks' to handle below scenarios 1. config->otg set scenario. 2. if any of these (config->otg, config->rwc) are set, this scenario should be handled only after ohci_setup() In patch 1/6 and 4/6: No change. Manjunath Goudar (6): USB: OHCI: make ohci-exynos a separate driver USB: OHCI: make ohci-omap a separate driver USB: OHCI: make ohci-omap3 a separate driver USB: OHCI: make ohci-spear a separate driver USB: OHCI: make ohci-at91 a separate driver USB: OHCI: make ohci-s3c2410 a separate driver drivers/usb/host/Kconfig | 30 ++++++- drivers/usb/host/Makefile | 6 ++ drivers/usb/host/ohci-at91.c | 151 ++++++++++++++++------------------- drivers/usb/host/ohci-exynos.c | 167 ++++++++++++++++----------------------- drivers/usb/host/ohci-hcd.c | 108 ------------------------- drivers/usb/host/ohci-omap.c | 157 +++++++++++++----------------------- drivers/usb/host/ohci-omap3.c | 113 ++++++++------------------ drivers/usb/host/ohci-s3c2410.c | 128 +++++++++++++----------------- drivers/usb/host/ohci-spear.c | 140 +++++++++++++------------------- 9 files changed, 369 insertions(+), 631 deletions(-) -- 1.7.9.5

11 years, 9 months

[PATCH] ASoC: twl6040: Use power efficient workqueue

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> The accessory detect debounce work is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/twl6040.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index 44621dd..caf8784 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -429,7 +429,8 @@ static irqreturn_t twl6040_audio_handler(int irq, void *data) struct snd_soc_codec *codec = data; struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec); - schedule_delayed_work(&priv->hs_jack.work, msecs_to_jiffies(200)); + queue_delayed_work(system_power_efficient_wq, + &priv->hs_jack.work, msecs_to_jiffies(200)); return IRQ_HANDLED; } -- 1.8.3.2

11 years, 9 months

[PATCH] ASoC: fsl_ssi: Provide register I/O functions by default

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Use the ARM version by default as that's the more generally portable one, it doesn't matter if they work well on random platforms when the goal is only build coverage. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/fsl/fsl_ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index c9974a4..e12a997 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -36,7 +36,7 @@ #define read_ssi(addr) in_be32(addr) #define write_ssi(val, addr) out_be32(addr, val) #define write_ssi_mask(addr, clear, set) clrsetbits_be32(addr, clear, set) -#elif defined ARM +#else #define read_ssi(addr) readl(addr) #define write_ssi(val, addr) writel(val, addr) /* -- 1.8.3.2

11 years, 9 months

[PATCH] ASoC: jack: Use power efficient workqueue

by Mark Brown

11 years, 9 months

[PATCH 1/4] ASoC: wm8350: Use power efficient workqueue

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> The accessory detect debounce work is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/wm8350.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 0e8b3aa..af1318d 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1301,7 +1301,8 @@ static irqreturn_t wm8350_hpl_jack_handler(int irq, void *data) if (device_may_wakeup(wm8350->dev)) pm_wakeup_event(wm8350->dev, 250); - schedule_delayed_work(&priv->hpl.work, msecs_to_jiffies(200)); + queue_delayed_work(system_power_efficient_wq, + &priv->hpl.work, msecs_to_jiffies(200)); return IRQ_HANDLED; } @@ -1318,7 +1319,8 @@ static irqreturn_t wm8350_hpr_jack_handler(int irq, void *data) if (device_may_wakeup(wm8350->dev)) pm_wakeup_event(wm8350->dev, 250); - schedule_delayed_work(&priv->hpr.work, msecs_to_jiffies(200)); + queue_delayed_work(system_power_efficient_wq, + &priv->hpr.work, msecs_to_jiffies(200)); return IRQ_HANDLED; } -- 1.8.3.2

11 years, 9 months

[PATCH] ASoC: sta32x: Use power efficient workqueue

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> None of the delayed work the driver schedules has particularly short delays and it is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/sta32x.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index cfb55fe..06edb39 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -363,16 +363,18 @@ static void sta32x_watchdog(struct work_struct *work) } if (!sta32x->shutdown) - schedule_delayed_work(&sta32x->watchdog_work, - round_jiffies_relative(HZ)); + queue_delayed_work(system_power_efficient_wq, + &sta32x->watchdog_work, + round_jiffies_relative(HZ)); } static void sta32x_watchdog_start(struct sta32x_priv *sta32x) { if (sta32x->pdata->needs_esd_watchdog) { sta32x->shutdown = 0; - schedule_delayed_work(&sta32x->watchdog_work, - round_jiffies_relative(HZ)); + queue_delayed_work(system_power_efficient_wq, + &sta32x->watchdog_work, + round_jiffies_relative(HZ)); } } -- 1.8.3.2

11 years, 9 months

[PATCH] ASoC: max98090: Use power efficient workqueue

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> None of the delayed work the driver schedules has particularly short delays and it is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/max98090.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index ad5313f..0569a4c 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2084,8 +2084,9 @@ static irqreturn_t max98090_interrupt(int irq, void *data) pm_wakeup_event(codec->dev, 100); - schedule_delayed_work(&max98090->jack_work, - msecs_to_jiffies(100)); + queue_delayed_work(system_power_efficient_wq, + &max98090->jack_work, + msecs_to_jiffies(100)); } if (active & M98090_DRCACT_MASK) @@ -2132,8 +2133,9 @@ int max98090_mic_detect(struct snd_soc_codec *codec, snd_soc_jack_report(max98090->jack, 0, SND_JACK_HEADSET | SND_JACK_BTN_0); - schedule_delayed_work(&max98090->jack_work, - msecs_to_jiffies(100)); + queue_delayed_work(system_power_efficient_wq, + &max98090->jack_work, + msecs_to_jiffies(100)); return 0; } -- 1.8.3.2

11 years, 9 months

[PATCH V3] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host

by Anup Patel

This patch allows us to have X-Gene guest VCPU when using KVM arm64 on APM X-Gene host. We add KVM_ARM_TARGET_XGENE_POTENZA for X-Gene Potenza compatible guest VCPU and we return KVM_ARM_TARGET_XGENE_POTENZA in kvm_target_cpu() when running on X-Gene host with Potenza core. V3: - Reduce multiple "return -EINVAL" in kvm_target_cpu() V2: - Renamed KVM_ARM_TARGET_XGENE_V8 to KVM_ARM_TARGET_XGENE_POTENZA V1: - Initial patch with target named as KVM_ARM_TARGET_XGENE_V8 Signed-off-by: Anup Patel <anup.patel(a)linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar(a)linaro.org> --- arch/arm64/include/uapi/asm/kvm.h | 3 ++- arch/arm64/kvm/guest.c | 36 ++++++++++++++++++++++------------ arch/arm64/kvm/sys_regs_generic_v8.c | 3 +++ 3 files changed, 29 insertions(+), 13 deletions(-) diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index 5031f42..d9f026b 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -55,8 +55,9 @@ struct kvm_regs { #define KVM_ARM_TARGET_AEM_V8 0 #define KVM_ARM_TARGET_FOUNDATION_V8 1 #define KVM_ARM_TARGET_CORTEX_A57 2 +#define KVM_ARM_TARGET_XGENE_POTENZA 3 -#define KVM_ARM_NUM_TARGETS 3 +#define KVM_ARM_NUM_TARGETS 4 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ #define KVM_ARM_DEVICE_TYPE_SHIFT 0 diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 2c3ff67..143d179 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -207,20 +207,32 @@ int __attribute_const__ kvm_target_cpu(void) unsigned long implementor = read_cpuid_implementor(); unsigned long part_number = read_cpuid_part_number(); - if (implementor != ARM_CPU_IMP_ARM) - return -EINVAL; - - switch (part_number) { - case ARM_CPU_PART_AEM_V8: - return KVM_ARM_TARGET_AEM_V8; - case ARM_CPU_PART_FOUNDATION: - return KVM_ARM_TARGET_FOUNDATION_V8; - case ARM_CPU_PART_CORTEX_A57: - /* Currently handled by the generic backend */ - return KVM_ARM_TARGET_CORTEX_A57; + switch (implementor) { + case ARM_CPU_IMP_ARM: + switch (part_number) { + case ARM_CPU_PART_AEM_V8: + return KVM_ARM_TARGET_AEM_V8; + case ARM_CPU_PART_FOUNDATION: + return KVM_ARM_TARGET_FOUNDATION_V8; + case ARM_CPU_PART_CORTEX_A57: + return KVM_ARM_TARGET_CORTEX_A57; + default: + break; + } + break; + case ARM_CPU_IMP_APM: + switch (part_number) { + case APM_CPU_PART_POTENZA: + return KVM_ARM_TARGET_XGENE_POTENZA; + default: + break; + } + break; default: - return -EINVAL; + break; } + + return -EINVAL; } int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c index 4268ab9..8fe6f76 100644 --- a/arch/arm64/kvm/sys_regs_generic_v8.c +++ b/arch/arm64/kvm/sys_regs_generic_v8.c @@ -90,6 +90,9 @@ static int __init sys_reg_genericv8_init(void) &genericv8_target_table); kvm_register_target_sys_reg_table(KVM_ARM_TARGET_CORTEX_A57, &genericv8_target_table); + kvm_register_target_sys_reg_table(KVM_ARM_TARGET_XGENE_POTENZA, + &genericv8_target_table); + return 0; } late_initcall(sys_reg_genericv8_init); -- 1.7.9.5

11 years, 9 months

[PATCH] ASoC: jack: Use power efficient workqueue

by Mark Brown

11 years, 9 months

[PATCH] regulator: core: Ensure selector is mapped

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Clearly the testing only covered the bottom range. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/regulator/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index fd3f6e0..42ae134 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2446,6 +2446,8 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev, return ret; } + ret += range->min_sel; + break; } -- 1.8.3.2

11 years, 9 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel