Y2038

y2038@lists.linaro.org

1132 discussions

[PATCH v2] ide: pdc202xx_new: Replace timeval with ktime_t

by Amitoj Kaur Chawla

This driver uses 'struct timeval' which we are trying to remove since 32 bit time types will break in the year 2038 by replacing it with ktime_t. This patch changes do_gettimeofday() to ktime_get() because ktime_get() returns a ktime_t while do_gettimeofday() returns struct timeval. This patch also uses ktime_us_delta() to get the elapsed time. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- Changes in v2: -Modified subject of commit message drivers/ide/pdc202xx_new.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index df73cbd..9ad014a 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> +#include <linux/ktime.h> #include <asm/io.h> @@ -243,13 +244,13 @@ static long read_counter(u32 dma_base) */ static long detect_pll_input_clock(unsigned long dma_base) { - struct timeval start_time, end_time; + ktime_t start_time, end_time; long start_count, end_count; long pll_input, usec_elapsed; u8 scr1; start_count = read_counter(dma_base); - do_gettimeofday(&start_time); + start_time = ktime_get(); /* Start the test mode */ outb(0x01, dma_base + 0x01); @@ -261,7 +262,7 @@ static long detect_pll_input_clock(unsigned long dma_base) mdelay(10); end_count = read_counter(dma_base); - do_gettimeofday(&end_time); + end_time = ktime_get(); /* Stop the test mode */ outb(0x01, dma_base + 0x01); @@ -273,8 +274,7 @@ static long detect_pll_input_clock(unsigned long dma_base) * Calculate the input clock in Hz * (the clock counter is 30 bit wide and counts down) */ - usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + - (end_time.tv_usec - start_time.tv_usec); + usec_elapsed = ktime_us_delta(end_time, start_time); pll_input = ((start_count - end_count) & 0x3fffffff) / 10 * (10000000 / usec_elapsed); -- 1.9.1

9 years, 5 months

[PATCH] [DCCP]: Use 64-bit timekeeping

by Tina Ruchandani

This patch changes the use of struct timespec in dccp_probe to use struct timespec64 instead. timespec uses a 32-bit seconds field which will overflow in the year 2038 and beyond. timespec64 uses a 64-bit seconds field. Note that the correctness of the code isn't changed, since the original code only uses the timestamps to compute a small elapsed interval. This patch is part of a larger attempt to remove instances of 32-bit timekeeping structures (timespec, timeval, time_t) from the kernel so it is easier to identify where the real 2038 issues are. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> --- net/dccp/probe.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/dccp/probe.c b/net/dccp/probe.c index d8346d0..3d3fda0 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/kfifo.h> #include <linux/vmalloc.h> +#include <linux/time64.h> #include <linux/gfp.h> #include <net/net_namespace.h> @@ -47,20 +48,20 @@ static struct { struct kfifo fifo; spinlock_t lock; wait_queue_head_t wait; - struct timespec tstart; + struct timespec64 tstart; } dccpw; static void printl(const char *fmt, ...) { va_list args; int len; - struct timespec now; + struct timespec64 now; char tbuf[256]; va_start(args, fmt); - getnstimeofday(&now); + getnstimeofday64(&now); - now = timespec_sub(now, dccpw.tstart); + now = timespec64_sub(now, dccpw.tstart); len = sprintf(tbuf, "%lu.%06lu ", (unsigned long) now.tv_sec, @@ -110,7 +111,7 @@ static struct jprobe dccp_send_probe = { static int dccpprobe_open(struct inode *inode, struct file *file) { kfifo_reset(&dccpw.fifo); - getnstimeofday(&dccpw.tstart); + getnstimeofday64(&dccpw.tstart); return 0; } -- 1.9.1

9 years, 5 months

[PATCH] NET: ATM: MPOA: Remove 32-bit timekeeping

by Tina Ruchandani

net/atm/mpoa_* files use 'struct timeval' to store event timestamps. struct timeval uses a 32-bit seconds field which will overflow in the year 2038 and beyond. Morever, the timestamps are being compared only to get seconds elapsed, so struct timeval which stores a seconds and microseconds field is an overkill. This patch replaces the use of struct timeval with time64_t to store a 64-bit seconds field. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> --- net/atm/common.c | 2 +- net/atm/mpc.c | 9 +++++---- net/atm/mpoa_caches.c | 49 ++++++++++++++++++++++++------------------------- net/atm/mpoa_caches.h | 9 +++++---- net/atm/mpoa_proc.c | 15 +++++++++------ 5 files changed, 44 insertions(+), 40 deletions(-) diff --git a/net/atm/common.c b/net/atm/common.c index 49a872d..a48a1ac 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -14,7 +14,7 @@ #include <linux/capability.h> #include <linux/mm.h> #include <linux/sched.h> -#include <linux/time.h> /* struct timeval */ +#include <linux/time64.h> /* 64-bit time for seconds */ #include <linux/skbuff.h> #include <linux/bitops.h> #include <linux/init.h> diff --git a/net/atm/mpc.c b/net/atm/mpc.c index 0e98222..211468e 100644 --- a/net/atm/mpc.c +++ b/net/atm/mpc.c @@ -1090,7 +1090,7 @@ static void MPOA_trigger_rcvd(struct k_message *msg, struct mpoa_client *mpc) msg->type = SND_MPOA_RES_RQST; msg->content.in_info = entry->ctrl_info; msg_to_mpoad(msg, mpc); - do_gettimeofday(&(entry->reply_wait)); + entry->reply_wait = ktime_get_real_seconds(); mpc->in_ops->put(entry); return; } @@ -1100,7 +1100,7 @@ static void MPOA_trigger_rcvd(struct k_message *msg, struct mpoa_client *mpc) msg->type = SND_MPOA_RES_RQST; msg->content.in_info = entry->ctrl_info; msg_to_mpoad(msg, mpc); - do_gettimeofday(&(entry->reply_wait)); + entry->reply_wait = ktime_get_real_seconds(); mpc->in_ops->put(entry); return; } @@ -1176,8 +1176,9 @@ static void MPOA_res_reply_rcvd(struct k_message *msg, struct mpoa_client *mpc) } entry->ctrl_info = msg->content.in_info; - do_gettimeofday(&(entry->tv)); - do_gettimeofday(&(entry->reply_wait)); /* Used in refreshing func from now on */ + entry->tv = ktime_get_real_seconds(); + /* Used in refreshing func from now on */ + entry->reply_wait = ktime_get_real_seconds(); entry->refresh_time = 0; ddprintk_cont("entry->shortcut = %p\n", entry->shortcut); diff --git a/net/atm/mpoa_caches.c b/net/atm/mpoa_caches.c index d1b2d9a..2a59830 100644 --- a/net/atm/mpoa_caches.c +++ b/net/atm/mpoa_caches.c @@ -116,7 +116,7 @@ static in_cache_entry *in_cache_add_entry(__be32 dst_ip, memcpy(entry->MPS_ctrl_ATM_addr, client->mps_ctrl_addr, ATM_ESA_LEN); entry->ctrl_info.in_dst_ip = dst_ip; - do_gettimeofday(&(entry->tv)); + entry->tv = ktime_get_real_seconds(); entry->retry_time = client->parameters.mpc_p4; entry->count = 1; entry->entry_state = INGRESS_INVALID; @@ -147,7 +147,7 @@ static int cache_hit(in_cache_entry *entry, struct mpoa_client *mpc) if (qos != NULL) msg.qos = qos->qos; msg_to_mpoad(&msg, mpc); - do_gettimeofday(&(entry->reply_wait)); + entry->reply_wait = ktime_get_real_seconds(); entry->entry_state = INGRESS_RESOLVING; } if (entry->shortcut != NULL) @@ -170,7 +170,7 @@ static int cache_hit(in_cache_entry *entry, struct mpoa_client *mpc) if (qos != NULL) msg.qos = qos->qos; msg_to_mpoad(&msg, mpc); - do_gettimeofday(&(entry->reply_wait)); + entry->reply_wait = ktime_get_real_seconds(); } return CLOSED; @@ -226,17 +226,16 @@ static void in_cache_remove_entry(in_cache_entry *entry, static void clear_count_and_expired(struct mpoa_client *client) { in_cache_entry *entry, *next_entry; - struct timeval now; + time64_t now; - do_gettimeofday(&now); + now = ktime_get_real_seconds(); write_lock_bh(&client->ingress_lock); entry = client->in_cache; while (entry != NULL) { entry->count = 0; next_entry = entry->next; - if ((now.tv_sec - entry->tv.tv_sec) - > entry->ctrl_info.holding_time) { + if ((now - entry->tv) > entry->ctrl_info.holding_time) { dprintk("holding time expired, ip = %pI4\n", &entry->ctrl_info.in_dst_ip); client->in_ops->remove_entry(entry, client); @@ -252,35 +251,36 @@ static void check_resolving_entries(struct mpoa_client *client) struct atm_mpoa_qos *qos; in_cache_entry *entry; - struct timeval now; + time64_t now; struct k_message msg; - do_gettimeofday(&now); + now = ktime_get_real_seconds(); read_lock_bh(&client->ingress_lock); entry = client->in_cache; while (entry != NULL) { if (entry->entry_state == INGRESS_RESOLVING) { - if ((now.tv_sec - entry->hold_down.tv_sec) < - client->parameters.mpc_p6) { + + if ((now - entry->hold_down) + < client->parameters.mpc_p6) { entry = entry->next; /* Entry in hold down */ continue; } - if ((now.tv_sec - entry->reply_wait.tv_sec) > - entry->retry_time) { + if ((now - entry->reply_wait) > entry->retry_time) { entry->retry_time = MPC_C1 * (entry->retry_time); /* * Retry time maximum exceeded, * put entry in hold down. */ if (entry->retry_time > client->parameters.mpc_p5) { - do_gettimeofday(&(entry->hold_down)); + entry->hold_down = + ktime_get_real_seconds(); entry->retry_time = client->parameters.mpc_p4; entry = entry->next; continue; } /* Ask daemon to send a resolution request. */ - memset(&(entry->hold_down), 0, sizeof(struct timeval)); + memset(&entry->hold_down, 0, sizeof(time64_t)); msg.type = SND_MPOA_RES_RTRY; memcpy(msg.MPS_ctrl, client->mps_ctrl_addr, ATM_ESA_LEN); msg.content.in_info = entry->ctrl_info; @@ -288,7 +288,7 @@ static void check_resolving_entries(struct mpoa_client *client) if (qos != NULL) msg.qos = qos->qos; msg_to_mpoad(&msg, client); - do_gettimeofday(&(entry->reply_wait)); + entry->reply_wait = ktime_get_real_seconds(); } } entry = entry->next; @@ -299,18 +299,18 @@ static void check_resolving_entries(struct mpoa_client *client) /* Call this every MPC-p5 seconds. */ static void refresh_entries(struct mpoa_client *client) { - struct timeval now; + time64_t now; struct in_cache_entry *entry = client->in_cache; ddprintk("refresh_entries\n"); - do_gettimeofday(&now); + now = ktime_get_real_seconds(); read_lock_bh(&client->ingress_lock); while (entry != NULL) { if (entry->entry_state == INGRESS_RESOLVED) { if (!(entry->refresh_time)) entry->refresh_time = (2 * (entry->ctrl_info.holding_time))/3; - if ((now.tv_sec - entry->reply_wait.tv_sec) > + if ((now - entry->reply_wait) > entry->refresh_time) { dprintk("refreshing an entry.\n"); entry->entry_state = INGRESS_REFRESHING; @@ -479,7 +479,7 @@ static eg_cache_entry *eg_cache_add_entry(struct k_message *msg, memcpy(entry->MPS_ctrl_ATM_addr, client->mps_ctrl_addr, ATM_ESA_LEN); entry->ctrl_info = msg->content.eg_info; - do_gettimeofday(&(entry->tv)); + entry->tv = ktime_get_real_seconds(); entry->entry_state = EGRESS_RESOLVED; dprintk("new_eg_cache_entry cache_id %u\n", ntohl(entry->ctrl_info.cache_id)); @@ -494,7 +494,7 @@ static eg_cache_entry *eg_cache_add_entry(struct k_message *msg, static void update_eg_cache_entry(eg_cache_entry *entry, uint16_t holding_time) { - do_gettimeofday(&(entry->tv)); + entry->tv = ktime_get_real_seconds(); entry->entry_state = EGRESS_RESOLVED; entry->ctrl_info.holding_time = holding_time; } @@ -502,17 +502,16 @@ static void update_eg_cache_entry(eg_cache_entry *entry, uint16_t holding_time) static void clear_expired(struct mpoa_client *client) { eg_cache_entry *entry, *next_entry; - struct timeval now; + time64_t now; struct k_message msg; - do_gettimeofday(&now); + now = ktime_get_real_seconds(); write_lock_irq(&client->egress_lock); entry = client->eg_cache; while (entry != NULL) { next_entry = entry->next; - if ((now.tv_sec - entry->tv.tv_sec) - > entry->ctrl_info.holding_time) { + if ((now - entry->tv) > entry->ctrl_info.holding_time) { msg.type = SND_EGRESS_PURGE; msg.content.eg_info = entry->ctrl_info; dprintk("egress_cache: holding time expired, cache_id = %u.\n", diff --git a/net/atm/mpoa_caches.h b/net/atm/mpoa_caches.h index 8e5f78c..874fded 100644 --- a/net/atm/mpoa_caches.h +++ b/net/atm/mpoa_caches.h @@ -1,6 +1,7 @@ #ifndef MPOA_CACHES_H #define MPOA_CACHES_H +#include <linux/time64.h> #include <linux/netdevice.h> #include <linux/types.h> #include <linux/atm.h> @@ -14,9 +15,9 @@ void atm_mpoa_init_cache(struct mpoa_client *mpc); typedef struct in_cache_entry { struct in_cache_entry *next; struct in_cache_entry *prev; - struct timeval tv; - struct timeval reply_wait; - struct timeval hold_down; + time64_t tv; + time64_t reply_wait; + time64_t hold_down; uint32_t packets_fwded; uint16_t entry_state; uint32_t retry_time; @@ -51,7 +52,7 @@ struct in_cache_ops{ typedef struct eg_cache_entry{ struct eg_cache_entry *next; struct eg_cache_entry *prev; - struct timeval tv; + time64_t tv; uint8_t MPS_ctrl_ATM_addr[ATM_ESA_LEN]; struct atm_vcc *shortcut; uint32_t packets_rcvd; diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c index 2df34eb..06f2920 100644 --- a/net/atm/mpoa_proc.c +++ b/net/atm/mpoa_proc.c @@ -7,7 +7,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/proc_fs.h> -#include <linux/time.h> +#include <linux/ktime.h> #include <linux/seq_file.h> #include <linux/uaccess.h> #include <linux/atmmpc.h> @@ -137,7 +137,7 @@ static int mpc_show(struct seq_file *m, void *v) int i; in_cache_entry *in_entry; eg_cache_entry *eg_entry; - struct timeval now; + time64_t now; unsigned char ip_string[16]; if (v == SEQ_START_TOKEN) { @@ -147,15 +147,17 @@ static int mpc_show(struct seq_file *m, void *v) seq_printf(m, "\nInterface %d:\n\n", mpc->dev_num); seq_printf(m, "Ingress Entries:\nIP address State Holding time Packets fwded VPI VCI\n"); - do_gettimeofday(&now); + now = ktime_get_real_seconds(); for (in_entry = mpc->in_cache; in_entry; in_entry = in_entry->next) { + unsigned long seconds_delta = now - in_entry->tv; + sprintf(ip_string, "%pI4", &in_entry->ctrl_info.in_dst_ip); seq_printf(m, "%-16s%s%-14lu%-12u", ip_string, ingress_state_string(in_entry->entry_state), in_entry->ctrl_info.holding_time - - (now.tv_sec-in_entry->tv.tv_sec), + seconds_delta, in_entry->packets_fwded); if (in_entry->shortcut) seq_printf(m, " %-3d %-3d", @@ -168,13 +170,14 @@ static int mpc_show(struct seq_file *m, void *v) seq_printf(m, "Egress Entries:\nIngress MPC ATM addr\nCache-id State Holding time Packets recvd Latest IP addr VPI VCI\n"); for (eg_entry = mpc->eg_cache; eg_entry; eg_entry = eg_entry->next) { unsigned char *p = eg_entry->ctrl_info.in_MPC_data_ATM_addr; + unsigned long seconds_delta = now - eg_entry->tv; + for (i = 0; i < ATM_ESA_LEN; i++) seq_printf(m, "%02x", p[i]); seq_printf(m, "\n%-16lu%s%-14lu%-15u", (unsigned long)ntohl(eg_entry->ctrl_info.cache_id), egress_state_string(eg_entry->entry_state), - (eg_entry->ctrl_info.holding_time - - (now.tv_sec-eg_entry->tv.tv_sec)), + (eg_entry->ctrl_info.holding_time - seconds_delta), eg_entry->packets_rcvd); /* latest IP address */ -- 2.6.0.rc2.230.g3dd15c0

9 years, 5 months

[PATCH] usb: usbtest: Add new ioctl interface

by Deepa Dinamani

The new USBTEST_REQUEST ioctl is intended to eventually replace the old timeval exposing interface. struct timeval can have different sizes based on whether the kernel/ userspace are compiled in 32 bit/ 64 bit mode. The new ioctl exposes the duration the tests run as a scalar nanosecond value. Rename old ioctl and data types to COMPAT_USBTEST_REQUEST and usbtest_param_compat, respectively. The change also uses monotonic time instead of real time for both ioctls. This ensures that the time duration is always positive. Also use ktime api's for time routines accomodating moving all of kernel to use 64 bit time eventually. Refactor usbtest_ioctl for readability to clarify that the only difference is in how delta time is returned. Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com> --- Resending due to incorrect recipient list This patch is intended for the next branch of the usb tree: git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git drivers/usb/misc/usbtest.c | 208 +++++++++++++++++++++++++++++---------------- 1 file changed, 134 insertions(+), 74 deletions(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 637f3f7..00daff3 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -22,7 +22,11 @@ static void complicated_callback(struct urb *urb); /*-------------------------------------------------------------------------*/ /* FIXME make these public somewhere; usbdevfs.h? */ -struct usbtest_param { + +/* Compat parameter for the compat interface. + * This is deprecated due to the timeval output parameter. + */ +struct usbtest_param_compat { /* inputs */ unsigned test_num; /* 0..(TEST_CASES-1) */ unsigned iterations; @@ -33,7 +37,27 @@ struct usbtest_param { /* outputs */ struct timeval duration; }; -#define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param) + +/* Parameters to the usbtest driver */ +struct usbtest_param { + /* inputs */ + unsigned test_num; /* 0..(TEST_CASES-1) */ + unsigned iterations; + unsigned length; + unsigned vary; + unsigned sglen; + + /* outputs */ + s64 duration_ns; +}; + +/* + * COMPAT IOCTL interface to the driver. + * The interface is deprecated and should not be used by new code. + */ +#define USBTEST_REQUEST_COMPAT _IOWR('U', 100, struct usbtest_param_compat) +/* IOCTL interface to the driver. */ +#define USBTEST_REQUEST _IOWR('U', 101, struct usbtest_param) /*-------------------------------------------------------------------------*/ @@ -2049,81 +2073,20 @@ static int test_unaligned_bulk( return retval; } -/*-------------------------------------------------------------------------*/ - -/* We only have this one interface to user space, through usbfs. - * User mode code can scan usbfs to find N different devices (maybe on - * different busses) to use when testing, and allocate one thread per - * test. So discovery is simplified, and we have no device naming issues. - * - * Don't use these only as stress/load tests. Use them along with with - * other USB bus activity: plugging, unplugging, mousing, mp3 playback, - * video capture, and so on. Run different tests at different times, in - * different sequences. Nothing here should interact with other devices, - * except indirectly by consuming USB bandwidth and CPU resources for test - * threads and request completion. But the only way to know that for sure - * is to test when HC queues are in use by many devices. - * - * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), - * it locks out usbcore in certain code paths. Notably, if you disconnect - * the device-under-test, hub_wq will wait block forever waiting for the - * ioctl to complete ... so that usb_disconnect() can abort the pending - * urbs and then call usbtest_disconnect(). To abort a test, you're best - * off just killing the userspace task and waiting for it to exit. - */ - +/* Run tests. */ static int -usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param *param) { struct usbtest_dev *dev = usb_get_intfdata(intf); struct usb_device *udev = testdev_to_usbdev(dev); - struct usbtest_param *param = buf; - int retval = -EOPNOTSUPP; struct urb *urb; struct scatterlist *sg; struct usb_sg_request req; - struct timeval start; unsigned i; - - /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ - - pattern = mod_pattern; - - if (code != USBTEST_REQUEST) - return -EOPNOTSUPP; + int retval = -EOPNOTSUPP; if (param->iterations <= 0) return -EINVAL; - - if (param->sglen > MAX_SGLEN) - return -EINVAL; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - - /* FIXME: What if a system sleep starts while a test is running? */ - - /* some devices, like ez-usb default devices, need a non-default - * altsetting to have any active endpoints. some tests change - * altsettings; force a default so most tests don't need to check. - */ - if (dev->info->alt >= 0) { - int res; - - if (intf->altsetting->desc.bInterfaceNumber) { - mutex_unlock(&dev->lock); - return -ENODEV; - } - res = set_altsetting(dev, dev->info->alt); - if (res) { - dev_err(&intf->dev, - "set altsetting to %d failed, %d\n", - dev->info->alt, res); - mutex_unlock(&dev->lock); - return res; - } - } - /* * Just a bunch of test cases that every HCD is expected to handle. * @@ -2133,7 +2096,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) * FIXME add more tests! cancel requests, verify the data, control * queueing, concurrent read+write threads, and so on. */ - do_gettimeofday(&start); switch (param->test_num) { case 0: @@ -2548,17 +2510,116 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) dev->in_pipe, NULL, 0); break; } - do_gettimeofday(&param->duration); - param->duration.tv_sec -= start.tv_sec; - param->duration.tv_usec -= start.tv_usec; - if (param->duration.tv_usec < 0) { - param->duration.tv_usec += 1000 * 1000; - param->duration.tv_sec -= 1; + return retval; +} + +/*-------------------------------------------------------------------------*/ + +/* We only have this one interface to user space, through usbfs. + * User mode code can scan usbfs to find N different devices (maybe on + * different busses) to use when testing, and allocate one thread per + * test. So discovery is simplified, and we have no device naming issues. + * + * Don't use these only as stress/load tests. Use them along with with + * other USB bus activity: plugging, unplugging, mousing, mp3 playback, + * video capture, and so on. Run different tests at different times, in + * different sequences. Nothing here should interact with other devices, + * except indirectly by consuming USB bandwidth and CPU resources for test + * threads and request completion. But the only way to know that for sure + * is to test when HC queues are in use by many devices. + * + * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), + * it locks out usbcore in certain code paths. Notably, if you disconnect + * the device-under-test, hub_wq will wait block forever waiting for the + * ioctl to complete ... so that usb_disconnect() can abort the pending + * urbs and then call usbtest_disconnect(). To abort a test, you're best + * off just killing the userspace task and waiting for it to exit. + */ + +static int +usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +{ + + struct usbtest_dev *dev = usb_get_intfdata(intf); + struct usbtest_param_compat *param_compat = buf; + struct usbtest_param temp; + struct usbtest_param *param = buf; + ktime_t start; + ktime_t end; + ktime_t duration; + int retval = -EOPNOTSUPP; + + /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ + + pattern = mod_pattern; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + + /* FIXME: What if a system sleep starts while a test is running? */ + + /* some devices, like ez-usb default devices, need a non-default + * altsetting to have any active endpoints. some tests change + * altsettings; force a default so most tests don't need to check. + */ + if (dev->info->alt >= 0) { + if (intf->altsetting->desc.bInterfaceNumber) { + retval = -ENODEV; + goto free_mutex; + } + retval = set_altsetting(dev, dev->info->alt); + if (retval) { + dev_err(&intf->dev, + "set altsetting to %d failed, %d\n", + dev->info->alt, retval); + goto free_mutex; + } + } + + switch (code) { + case USBTEST_REQUEST_COMPAT: + temp.test_num = param_compat->test_num; + temp.iterations = param_compat->iterations; + temp.length = param_compat->length; + temp.sglen = param_compat->sglen; + temp.vary = param_compat->vary; + param = &temp; + break; + + case USBTEST_REQUEST: + break; + + default: + retval = -EOPNOTSUPP; + goto free_mutex; + } + + start = ktime_get(); + + retval = usbtest_do_ioctl(intf, param); + if (retval) + goto free_mutex; + + end = ktime_get(); + + duration = ktime_sub(end, start); + + switch (code) { + case USBTEST_REQUEST_COMPAT: + param_compat->duration = ktime_to_timeval(duration); + break; + + case USBTEST_REQUEST: + param->duration_ns = ktime_to_ns(duration); + break; } + +free_mutex: mutex_unlock(&dev->lock); return retval; } + /*-------------------------------------------------------------------------*/ static unsigned force_interrupt; @@ -2891,4 +2952,3 @@ module_exit(usbtest_exit); MODULE_DESCRIPTION("USB Core/HCD Testing Driver"); MODULE_LICENSE("GPL"); - -- 1.9.1

9 years, 6 months

[RESEND PATCH] mpt3sas: Remove usage of 'struct timeval'

by Tina Ruchandani

'struct timeval' will have its tv_sec value overflow on 32-bit systems in year 2038 and beyond. This patch replaces the use of struct timeval for computing mpi_request.TimeStamp, and instead uses ktime_t which provides 64-bit seconds value. The timestamp computed remains unaffected (milliseconds since Unix epoch). Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 1560115..ee9c3c6 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -56,6 +56,7 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/time.h> +#include <linux/ktime.h> #include <linux/kthread.h> #include <linux/aer.h> @@ -3735,7 +3736,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) Mpi2IOCInitRequest_t mpi_request; Mpi2IOCInitReply_t mpi_reply; int i, r = 0; - struct timeval current_time; + ktime_t current_time; u16 ioc_status; u32 reply_post_free_array_sz = 0; Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL; @@ -3797,9 +3798,8 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) /* This time stamp specifies number of milliseconds * since epoch ~ midnight January 1, 1970. */ - do_gettimeofday(&current_time); - mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + - (current_time.tv_usec / 1000)); + current_time = ktime_get_real(); + mpi_request.TimeStamp = cpu_to_le64(ktime_to_ms(current_time)); if (ioc->logging_level & MPT_DEBUG_INIT) { __le32 *mfp; -- 2.2.0.rc0.207.ga3a616c

9 years, 6 months

[PATCH] mtd:replace struct timeval with ktime_t in tests

by DengChao

The mtd tests' code recodes tests' start time and finish time by storing real time in struct timeval. This will cause problems on 32-bit architectures in 2038 when time_t overflows. Since the tests' code just needs delta value between start and end time, it is not necessary to record them in real time. This patch changes the code to use the monotonic time instead, replaces do_gettimeofday() and struct timeval with ktime_get() and ktime_t. Signed-off-by: DengChao <chao.deng(a)linaro.org> --- drivers/mtd/tests/speedtest.c | 9 ++++----- drivers/mtd/tests/torturetest.c | 9 ++++----- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/tests/speedtest.c b/drivers/mtd/tests/speedtest.c index 5a6f31a..039cf92 100644 --- a/drivers/mtd/tests/speedtest.c +++ b/drivers/mtd/tests/speedtest.c @@ -49,7 +49,7 @@ static int pgsize; static int ebcnt; static int pgcnt; static int goodebcnt; -static struct timeval start, finish; +static ktime_t start, finish; static int multiblock_erase(int ebnum, int blocks) { @@ -168,12 +168,12 @@ static int read_eraseblock_by_2pages(int ebnum) static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } static long calc_speed(void) @@ -181,8 +181,7 @@ static long calc_speed(void) uint64_t k; long ms; - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); if (ms == 0) return 0; k = (uint64_t)goodebcnt * (mtd->erasesize / 1024) * 1000; diff --git a/drivers/mtd/tests/torturetest.c b/drivers/mtd/tests/torturetest.c index e5d6e6d..3c8a86b 100644 --- a/drivers/mtd/tests/torturetest.c +++ b/drivers/mtd/tests/torturetest.c @@ -79,18 +79,18 @@ static unsigned char *check_buf; static unsigned int erase_cycles; static int pgsize; -static struct timeval start, finish; +static ktime_t start, finish; static void report_corrupt(unsigned char *read, unsigned char *written); static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } /* @@ -333,8 +333,7 @@ static int __init tort_init(void) long ms; stop_timing(); - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); pr_info("%08u erase cycles done, took %lu " "milliseconds (%lu seconds)\n", erase_cycles, ms, ms / 1000); -- 1.9.1

9 years, 6 months

[PATCH] staging: media: lirc: lirc_sasem: Replace timeval with ktime_t

by Amitoj Kaur Chawla

This driver uses 'struct timeval' which we are trying to remove since 32 bit time types will break in the year 2038 by replacing it with ktime_t. This patch changes do_gettimeofday() to ktime_get() because ktime_get() returns ktime_t while do_gettimeofday() returns struct timeval. This patch also uses ktime_ms_delta() to get the elapsed time in milliseconds. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/staging/media/lirc/lirc_sasem.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c index bc78da0..51780c0 100644 --- a/drivers/staging/media/lirc/lirc_sasem.c +++ b/drivers/staging/media/lirc/lirc_sasem.c @@ -40,6 +40,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/ktime.h> #include <linux/uaccess.h> #include <linux/usb.h> @@ -111,7 +112,7 @@ struct sasem_context { } tx; /* for dealing with repeat codes (wish there was a toggle bit!) */ - struct timeval presstime; + ktime_t presstime; char lastcode[8]; int codesaved; }; @@ -567,7 +568,7 @@ static void incoming_packet(struct sasem_context *context, int len = urb->actual_length; unsigned char *buf = urb->transfer_buffer; long ms; - struct timeval tv; + ktime_t timestamp; if (len != 8) { dev_warn(&context->dev->dev, @@ -584,10 +585,9 @@ static void incoming_packet(struct sasem_context *context, */ /* get the time since the last button press */ - do_gettimeofday(&tv); - ms = (tv.tv_sec - context->presstime.tv_sec) * 1000 + - (tv.tv_usec - context->presstime.tv_usec) / 1000; - + timestamp = ktime_get(); + ms = ktime_ms_delta(timestamp, context->presstime); + if (memcmp(buf, "\x08\0\0\0\0\0\0\0", 8) == 0) { /* * the repeat code is being sent, so we copy @@ -602,8 +602,7 @@ static void incoming_packet(struct sasem_context *context, */ if ((ms < 250) && (context->codesaved != 0)) { memcpy(buf, &context->lastcode, 8); - context->presstime.tv_sec = tv.tv_sec; - context->presstime.tv_usec = tv.tv_usec; + context->presstime = timestamp; } } else { /* save the current valid code for repeats */ @@ -613,8 +612,7 @@ static void incoming_packet(struct sasem_context *context, * just for safety reasons */ context->codesaved = 1; - context->presstime.tv_sec = tv.tv_sec; - context->presstime.tv_usec = tv.tv_usec; + context->presstime = timestamp; } lirc_buffer_write(context->driver->rbuf, buf); -- 1.9.1

9 years, 6 months

[RESEND v2] mtd: tests: Replace timeval with ktime_t

by Shraddha Barke

Changes the 32-bit time type timeval to the 64-bit time type ktime_t, since 32-bit systems using struct timeval will break in the year 2038. Correspondingly change do_gettimeofday() to ktime_get() since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval.Here, ktime_get() is used instead of ktime_get_real() since ktime_get() uses monotonic clock. Signed-off-by: Shraddha Barke <shraddha.6596(a)gmail.com> Reviewed-by: Arnd Bergmann <arnd(a)arndb.de> --- Changes in v2- Make commit message clearer. drivers/mtd/tests/speedtest.c | 10 +++++----- drivers/mtd/tests/torturetest.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/tests/speedtest.c b/drivers/mtd/tests/speedtest.c index 5a6f31a..0b89418 100644 --- a/drivers/mtd/tests/speedtest.c +++ b/drivers/mtd/tests/speedtest.c @@ -22,6 +22,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/init.h> +#include <linux/ktime.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/err.h> @@ -49,7 +50,7 @@ static int pgsize; static int ebcnt; static int pgcnt; static int goodebcnt; -static struct timeval start, finish; +static ktime_t start, finish; static int multiblock_erase(int ebnum, int blocks) { @@ -168,12 +169,12 @@ static int read_eraseblock_by_2pages(int ebnum) static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } static long calc_speed(void) @@ -181,8 +182,7 @@ static long calc_speed(void) uint64_t k; long ms; - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); if (ms == 0) return 0; k = (uint64_t)goodebcnt * (mtd->erasesize / 1024) * 1000; diff --git a/drivers/mtd/tests/torturetest.c b/drivers/mtd/tests/torturetest.c index e5d6e6d..93c2729 100644 --- a/drivers/mtd/tests/torturetest.c +++ b/drivers/mtd/tests/torturetest.c @@ -26,6 +26,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/init.h> +#include <linux/ktime.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/err.h> @@ -79,18 +80,18 @@ static unsigned char *check_buf; static unsigned int erase_cycles; static int pgsize; -static struct timeval start, finish; +static ktime_t start, finish; static void report_corrupt(unsigned char *read, unsigned char *written); static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } /* @@ -333,8 +334,7 @@ static int __init tort_init(void) long ms; stop_timing(); - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); pr_info("%08u erase cycles done, took %lu " "milliseconds (%lu seconds)\n", erase_cycles, ms, ms / 1000); -- 2.1.4

9 years, 6 months

[PATCH] hp_sdc: fixed y2038 problem

by WEN Pingbo

Two replacements happened in this patch: 1. using timespec64 to prevent time overflow in 2038 2. using ktime_get_ts64 to avoid wall time issues(leap second, etc) Signed-off-by: WEN Pingbo <pingbo.wen(a)linaro.org> --- drivers/input/serio/hp_sdc.c | 18 +++++++++--------- include/linux/hp_sdc.h | 6 +++--- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 852858e..76fb7fa 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -193,7 +193,7 @@ static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data) curr->seq[curr->idx++] = status; curr->seq[curr->idx++] = data; hp_sdc.rqty -= 2; - do_gettimeofday(&hp_sdc.rtv); + ktime_get_ts64(&hp_sdc.rtv); if (hp_sdc.rqty <= 0) { /* All data has been gathered. */ @@ -306,13 +306,13 @@ static void hp_sdc_tasklet(unsigned long foo) write_lock_irq(&hp_sdc.rtq_lock); if (hp_sdc.rcurr >= 0) { - struct timeval tv; + struct timespec64 ts64; - do_gettimeofday(&tv); - if (tv.tv_sec > hp_sdc.rtv.tv_sec) - tv.tv_usec += USEC_PER_SEC; + ktime_get_ts64(&ts64); + if (ts64.tv_sec > hp_sdc.rtv.tv_sec) + ts64.tv_nsec += NSEC_PER_SEC; - if (tv.tv_usec - hp_sdc.rtv.tv_usec > HP_SDC_MAX_REG_DELAY) { + if (ts64.tv_nsec - hp_sdc.rtv.tv_nsec > HP_SDC_MAX_REG_DELAY) { hp_sdc_transaction *curr; uint8_t tmp; @@ -321,8 +321,8 @@ static void hp_sdc_tasklet(unsigned long foo) * we'll need to figure out a way to communicate * it back to the application. and be less verbose. */ - printk(KERN_WARNING PREFIX "read timeout (%ius)!\n", - (int)(tv.tv_usec - hp_sdc.rtv.tv_usec)); + printk(KERN_WARNING PREFIX "read timeout (%llins)!\n", + (s64)(ts64.tv_nsec - hp_sdc.rtv.tv_nsec)); curr->idx += hp_sdc.rqty; hp_sdc.rqty = 0; tmp = curr->seq[curr->actidx]; @@ -551,7 +551,7 @@ unsigned long hp_sdc_put(void) /* Start a new read */ hp_sdc.rqty = curr->seq[curr->idx]; - do_gettimeofday(&hp_sdc.rtv); + ktime_get_ts64(&hp_sdc.rtv); curr->idx++; /* Still need to lock here in case of spurious irq. */ write_lock_irq(&hp_sdc.rtq_lock); diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h index d392975..1535640 100644 --- a/include/linux/hp_sdc.h +++ b/include/linux/hp_sdc.h @@ -47,9 +47,9 @@ #endif -/* No 4X status reads take longer than this (in usec). +/* No 4X status reads take longer than this (in nsec). */ -#define HP_SDC_MAX_REG_DELAY 20000 +#define HP_SDC_MAX_REG_DELAY 20000000 typedef void (hp_sdc_irqhook) (int irq, void *dev_id, uint8_t status, uint8_t data); @@ -281,7 +281,7 @@ typedef struct { hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */ int rcurr, rqty; /* Current read transact in process */ - struct timeval rtv; /* Time when current read started */ + struct timespec64 rtv; /* Time when current read started */ int wcurr; /* Current write transact in process */ int dev_err; /* carries status from registration */ -- 1.9.1

9 years, 6 months

[PATCH] hil_mlc: convert timeval to timespec64

by WEN Pingbo

Using struct timeval will cause time overflow in 2038, replacing it with a 64bit version. In addition, the origin driver try to covert usec to jiffies manually in hilse_donode(). This is not a universal and safe way, using nsecs_to_jiffies() to fix that. Signed-off-by: WEN Pingbo <pingbo.wen(a)linaro.org> --- drivers/input/serio/hil_mlc.c | 31 +++++++++++++++++-------------- drivers/input/serio/hp_sdc_mlc.c | 10 ++++++---- include/linux/hil_mlc.h | 4 ++-- 3 files changed, 25 insertions(+), 20 deletions(-) diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c index 65605e4..4e3b926 100644 --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -274,14 +274,14 @@ static int hilse_match(hil_mlc *mlc, int unused) /* An LCV used to prevent runaway loops, forces 5 second sleep when reset. */ static int hilse_init_lcv(hil_mlc *mlc, int unused) { - struct timeval tv; + struct timespec64 ts64; - do_gettimeofday(&tv); + ktime_get_ts64(&ts64); - if (mlc->lcv && (tv.tv_sec - mlc->lcv_tv.tv_sec) < 5) + if (mlc->lcv && (ts64.tv_sec - mlc->lcv_ts64.tv_sec) < 5) return -1; - mlc->lcv_tv = tv; + mlc->lcv_ts64 = ts64; mlc->lcv = 0; return 0; @@ -605,7 +605,7 @@ static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node } mlc->istarted = 1; mlc->intimeout = node->arg; - do_gettimeofday(&(mlc->instart)); + ktime_get_ts64(&(mlc->instart)); mlc->icount = 15; memset(mlc->ipacket, 0, 16 * sizeof(hil_packet)); BUG_ON(down_trylock(&mlc->isem)); @@ -710,7 +710,7 @@ static int hilse_donode(hil_mlc *mlc) break; } mlc->ostarted = 0; - do_gettimeofday(&(mlc->instart)); + ktime_get_ts64(&(mlc->instart)); write_unlock_irqrestore(&mlc->lock, flags); nextidx = HILSEN_NEXT; break; @@ -731,18 +731,21 @@ static int hilse_donode(hil_mlc *mlc) #endif while (nextidx & HILSEN_SCHED) { - struct timeval tv; + struct timespec64 ts64; if (!sched_long) goto sched; - do_gettimeofday(&tv); - tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec); - tv.tv_usec -= mlc->instart.tv_usec; - if (tv.tv_usec >= mlc->intimeout) goto sched; - tv.tv_usec = (mlc->intimeout - tv.tv_usec) * HZ / USEC_PER_SEC; - if (!tv.tv_usec) goto sched; - mod_timer(&hil_mlcs_kicker, jiffies + tv.tv_usec); + ktime_get_ts64(&ts64); + ts64.tv_nsec += NSEC_PER_SEC * + (ts64.tv_sec - mlc->instart.tv_sec); + ts64.tv_nsec -= mlc->instart.tv_nsec; + if (ts64.tv_nsec >= (mlc->intimeout * NSEC_PER_USEC)) + goto sched; + ts64.tv_nsec = mlc->intimeout * NSEC_PER_USEC - ts64.tv_nsec; + if (!ts64.tv_nsec) goto sched; + mod_timer(&hil_mlcs_kicker, + jiffies + nsecs_to_jiffies(ts64.tv_nsec)); break; sched: tasklet_schedule(&hil_mlcs_tasklet); diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c index d50f067..369885d 100644 --- a/drivers/input/serio/hp_sdc_mlc.c +++ b/drivers/input/serio/hp_sdc_mlc.c @@ -149,7 +149,7 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout) /* Try to down the semaphore */ if (down_trylock(&mlc->isem)) { - struct timeval tv; + struct timespec64 ts64; if (priv->emtestmode) { mlc->ipacket[0] = HIL_ERR_INT | (mlc->opacket & @@ -160,9 +160,11 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout) /* printk(KERN_DEBUG PREFIX ">[%x]\n", mlc->ipacket[0]); */ goto wasup; } - do_gettimeofday(&tv); - tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec); - if (tv.tv_usec - mlc->instart.tv_usec > mlc->intimeout) { + ktime_get_ts64(&ts64); + ts64.tv_nsec += NSEC_PER_SEC * + (ts64.tv_sec - mlc->instart.tv_sec); + if (ts64.tv_nsec - mlc->instart.tv_nsec > mlc->intimeout * + NSEC_PER_USEC) { /* printk("!%i %i", tv.tv_usec - mlc->instart.tv_usec, mlc->intimeout); diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h index 394a840..a6b62fb 100644 --- a/include/linux/hil_mlc.h +++ b/include/linux/hil_mlc.h @@ -144,12 +144,12 @@ struct hil_mlc { hil_packet ipacket[16]; hil_packet imatch; int icount; - struct timeval instart; + struct timespec64 instart; suseconds_t intimeout; int ddi; /* Last operational device id */ int lcv; /* LCV to throttle loops */ - struct timeval lcv_tv; /* Time loop was started */ + struct timespec64 lcv_ts64; /* Time loop was started */ int di_map[7]; /* Maps below items to live devs */ struct hil_mlc_devinfo di[HIL_MLC_DEVMEM]; -- 1.9.1

9 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038