- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] blk-iocost: fix NULL iocg deref from racing against" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d16baa3f1453c14d680c5fee01cd122a22d0e0ce Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj(a)kernel.org> Date: Tue, 5 Jan 2021 12:37:23 -0500 Subject: [PATCH] blk-iocost: fix NULL iocg deref from racing against initialization When initializing iocost for a queue, its rqos should be registered before the blkcg policy is activated to allow policy data initiailization to lookup the associated ioc. This unfortunately means that the rqos methods can be called on bios before iocgs are attached to all existing blkgs. While the race is theoretically possible on ioc_rqos_throttle(), it mostly happened in ioc_rqos_merge() due to the difference in how they lookup ioc. The former determines it from the passed in @rqos and then bails before dereferencing iocg if the looked up ioc is disabled, which most likely is the case if initialization is still in progress. The latter looked up ioc by dereferencing the possibly NULL iocg making it a lot more prone to actually triggering the bug. * Make ioc_rqos_merge() use the same method as ioc_rqos_throttle() to look up ioc for consistency. * Make ioc_rqos_throttle() and ioc_rqos_merge() test for NULL iocg before dereferencing it. * Explain the danger of NULL iocgs in blk_iocost_init(). Signed-off-by: Tejun Heo <tj(a)kernel.org> Reported-by: Jonathan Lemon <bsd(a)fb.com> Cc: stable(a)vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/block/blk-iocost.c b/block/blk-iocost.c index ac6078a34939..98d656bdb42b 100644 --- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -2551,8 +2551,8 @@ static void ioc_rqos_throttle(struct rq_qos *rqos, struct bio *bio) bool use_debt, ioc_locked; unsigned long flags; - /* bypass IOs if disabled or for root cgroup */ - if (!ioc->enabled || !iocg->level) + /* bypass IOs if disabled, still initializing, or for root cgroup */ + if (!ioc->enabled || !iocg || !iocg->level) return; /* calculate the absolute vtime cost */ @@ -2679,14 +2679,14 @@ static void ioc_rqos_merge(struct rq_qos *rqos, struct request *rq, struct bio *bio) { struct ioc_gq *iocg = blkg_to_iocg(bio->bi_blkg); - struct ioc *ioc = iocg->ioc; + struct ioc *ioc = rqos_to_ioc(rqos); sector_t bio_end = bio_end_sector(bio); struct ioc_now now; u64 vtime, abs_cost, cost; unsigned long flags; - /* bypass if disabled or for root cgroup */ - if (!ioc->enabled || !iocg->level) + /* bypass if disabled, still initializing, or for root cgroup */ + if (!ioc->enabled || !iocg || !iocg->level) return; abs_cost = calc_vtime_cost(bio, iocg, true); @@ -2863,6 +2863,12 @@ static int blk_iocost_init(struct request_queue *q) ioc_refresh_params(ioc, true); spin_unlock_irq(&ioc->lock); + /* + * rqos must be added before activation to allow iocg_pd_init() to + * lookup the ioc from q. This means that the rqos methods may get + * called before policy activation completion, can't assume that the + * target bio has an iocg associated and need to test for NULL iocg. + */ rq_qos_add(q, rqos); ret = blkcg_activate_policy(q, &blkcg_policy_iocost); if (ret) {

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] x86/resctrl: Don't move a task to the same resource group" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a0195f314a25582b38993bf30db11c300f4f4611 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu(a)intel.com> Date: Thu, 17 Dec 2020 14:31:19 -0800 Subject: [PATCH] x86/resctrl: Don't move a task to the same resource group Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3… Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb(a)google.com> Signed-off-by: Fenghua Yu <fenghua.yu(a)intel.com> Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Reviewed-by: Tony Luck <tony.luck(a)intel.com> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.16082431… diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index 1c6f8a60ac52..460f3e0df106 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -546,6 +546,13 @@ static void update_task_closid_rmid(struct task_struct *t) static int __rdtgroup_move_task(struct task_struct *tsk, struct rdtgroup *rdtgrp) { + /* If the task is already in rdtgrp, no need to move the task. */ + if ((rdtgrp->type == RDTCTRL_GROUP && tsk->closid == rdtgrp->closid && + tsk->rmid == rdtgrp->mon.rmid) || + (rdtgrp->type == RDTMON_GROUP && tsk->rmid == rdtgrp->mon.rmid && + tsk->closid == rdtgrp->mon.parent->closid)) + return 0; + /* * Set the task's closid/rmid before the PQR_ASSOC MSR can be * updated by them.

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] x86/resctrl: Don't move a task to the same resource group" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a0195f314a25582b38993bf30db11c300f4f4611 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu(a)intel.com> Date: Thu, 17 Dec 2020 14:31:19 -0800 Subject: [PATCH] x86/resctrl: Don't move a task to the same resource group Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3… Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb(a)google.com> Signed-off-by: Fenghua Yu <fenghua.yu(a)intel.com> Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Reviewed-by: Tony Luck <tony.luck(a)intel.com> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.16082431… diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index 1c6f8a60ac52..460f3e0df106 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -546,6 +546,13 @@ static void update_task_closid_rmid(struct task_struct *t) static int __rdtgroup_move_task(struct task_struct *tsk, struct rdtgroup *rdtgrp) { + /* If the task is already in rdtgrp, no need to move the task. */ + if ((rdtgrp->type == RDTCTRL_GROUP && tsk->closid == rdtgrp->closid && + tsk->rmid == rdtgrp->mon.rmid) || + (rdtgrp->type == RDTMON_GROUP && tsk->rmid == rdtgrp->mon.rmid && + tsk->closid == rdtgrp->mon.parent->closid)) + return 0; + /* * Set the task's closid/rmid before the PQR_ASSOC MSR can be * updated by them.

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] x86/resctrl: Don't move a task to the same resource group" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a0195f314a25582b38993bf30db11c300f4f4611 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu(a)intel.com> Date: Thu, 17 Dec 2020 14:31:19 -0800 Subject: [PATCH] x86/resctrl: Don't move a task to the same resource group Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3… Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb(a)google.com> Signed-off-by: Fenghua Yu <fenghua.yu(a)intel.com> Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Reviewed-by: Tony Luck <tony.luck(a)intel.com> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.16082431… diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index 1c6f8a60ac52..460f3e0df106 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -546,6 +546,13 @@ static void update_task_closid_rmid(struct task_struct *t) static int __rdtgroup_move_task(struct task_struct *tsk, struct rdtgroup *rdtgrp) { + /* If the task is already in rdtgrp, no need to move the task. */ + if ((rdtgrp->type == RDTCTRL_GROUP && tsk->closid == rdtgrp->closid && + tsk->rmid == rdtgrp->mon.rmid) || + (rdtgrp->type == RDTMON_GROUP && tsk->rmid == rdtgrp->mon.rmid && + tsk->closid == rdtgrp->mon.parent->closid)) + return 0; + /* * Set the task's closid/rmid before the PQR_ASSOC MSR can be * updated by them.

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] kvm: check tlbs_dirty directly" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 88bf56d04bc3564542049ec4ec168a8b60d0b48c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan <laijs(a)linux.alibaba.com> Date: Thu, 17 Dec 2020 23:41:18 +0800 Subject: [PATCH] kvm: check tlbs_dirty directly In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable(a)vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs(a)linux.alibaba.com> Message-Id: <20201217154118.16497-1-jiangshanlai(a)gmail.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 3abcb2ce5b7d..19dae28904f7 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -485,9 +485,8 @@ static int kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, kvm->mmu_notifier_count++; need_tlb_flush = kvm_unmap_hva_range(kvm, range->start, range->end, range->flags); - need_tlb_flush |= kvm->tlbs_dirty; /* we've to flush the tlb before the pages can be freed */ - if (need_tlb_flush) + if (need_tlb_flush || kvm->tlbs_dirty) kvm_flush_remote_tlbs(kvm); spin_unlock(&kvm->mmu_lock);

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] kvm: check tlbs_dirty directly" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 88bf56d04bc3564542049ec4ec168a8b60d0b48c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan <laijs(a)linux.alibaba.com> Date: Thu, 17 Dec 2020 23:41:18 +0800 Subject: [PATCH] kvm: check tlbs_dirty directly In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable(a)vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs(a)linux.alibaba.com> Message-Id: <20201217154118.16497-1-jiangshanlai(a)gmail.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 3abcb2ce5b7d..19dae28904f7 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -485,9 +485,8 @@ static int kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, kvm->mmu_notifier_count++; need_tlb_flush = kvm_unmap_hva_range(kvm, range->start, range->end, range->flags); - need_tlb_flush |= kvm->tlbs_dirty; /* we've to flush the tlb before the pages can be freed */ - if (need_tlb_flush) + if (need_tlb_flush || kvm->tlbs_dirty) kvm_flush_remote_tlbs(kvm); spin_unlock(&kvm->mmu_lock);

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] usb: gadget: u_ether: Fix MTU size mismatch with RX packet" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 0a88fa221ce911c331bf700d2214c5b2f77414d3 Mon Sep 17 00:00:00 2001 From: Manish Narani <manish.narani(a)xilinx.com> Date: Tue, 17 Nov 2020 12:43:35 +0530 Subject: [PATCH] usb: gadget: u_ether: Fix MTU size mismatch with RX packet size Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani <manish.narani(a)xilinx.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 31ea76adcc0d..c019f2b0c0af 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -45,9 +45,10 @@ #define UETH__VERSION "29-May-2008" /* Experiments show that both Linux and Windows hosts allow up to 16k - * frame sizes. Set the max size to 15k+52 to prevent allocating 32k + * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k * blocks and still have efficient handling. */ -#define GETHER_MAX_ETH_FRAME_LEN 15412 +#define GETHER_MAX_MTU_SIZE 15412 +#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) struct eth_dev { /* lock is held while accessing port_usb @@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); @@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname) /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; return net; }

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] usb: gadget: u_ether: Fix MTU size mismatch with RX packet" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 0a88fa221ce911c331bf700d2214c5b2f77414d3 Mon Sep 17 00:00:00 2001 From: Manish Narani <manish.narani(a)xilinx.com> Date: Tue, 17 Nov 2020 12:43:35 +0530 Subject: [PATCH] usb: gadget: u_ether: Fix MTU size mismatch with RX packet size Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani <manish.narani(a)xilinx.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 31ea76adcc0d..c019f2b0c0af 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -45,9 +45,10 @@ #define UETH__VERSION "29-May-2008" /* Experiments show that both Linux and Windows hosts allow up to 16k - * frame sizes. Set the max size to 15k+52 to prevent allocating 32k + * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k * blocks and still have efficient handling. */ -#define GETHER_MAX_ETH_FRAME_LEN 15412 +#define GETHER_MAX_MTU_SIZE 15412 +#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) struct eth_dev { /* lock is held while accessing port_usb @@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); @@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname) /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; return net; }

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c318840fb2a42ce25febc95c4c19357acf1ae5ca Mon Sep 17 00:00:00 2001 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Wed, 30 Dec 2020 11:20:44 -0500 Subject: [PATCH] USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug The dummy-hcd driver was written under the assumption that all the parameters in URBs sent to its root hub would be valid. With URBs sent from userspace via usbfs, that assumption can be violated. In particular, the driver doesn't fully check the port-feature values stored in the wValue entry of Clear-Port-Feature and Set-Port-Feature requests. Values that are too large can cause the driver to perform an invalid left shift of more than 32 bits. Ironically, two of those left shifts are unnecessary, because they implement Set-Port-Feature requests that hubs are not required to support, according to section 11.24.2.13 of the USB-2.0 spec. This patch adds the appropriate checks for the port feature selector values and removes the unnecessary feature settings. It also rejects requests to set the TEST feature or to set or clear the INDICATOR and C_OVERCURRENT features, as none of these are relevant to dummy-hcd's root-hub emulation. CC: <stable(a)vger.kernel.org> Reported-and-tested-by: syzbot+5925509f78293baa7331(a)syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20201230162044.GA727759@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ab5e978b5052..1a953f44183a 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2118,9 +2118,21 @@ static int dummy_hub_control( dum_hcd->port_status &= ~USB_PORT_STAT_POWER; set_link_state(dum_hcd); break; - default: + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; } break; case GetHubDescriptor: @@ -2281,18 +2293,17 @@ static int dummy_hub_control( */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; default: - if (hcd->speed == HCD_USB3) { - if ((dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - } else - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - set_link_state(dum_hcd); + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; } break; case GetPortErrorCount:

4 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c318840fb2a42ce25febc95c4c19357acf1ae5ca Mon Sep 17 00:00:00 2001 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Wed, 30 Dec 2020 11:20:44 -0500 Subject: [PATCH] USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug The dummy-hcd driver was written under the assumption that all the parameters in URBs sent to its root hub would be valid. With URBs sent from userspace via usbfs, that assumption can be violated. In particular, the driver doesn't fully check the port-feature values stored in the wValue entry of Clear-Port-Feature and Set-Port-Feature requests. Values that are too large can cause the driver to perform an invalid left shift of more than 32 bits. Ironically, two of those left shifts are unnecessary, because they implement Set-Port-Feature requests that hubs are not required to support, according to section 11.24.2.13 of the USB-2.0 spec. This patch adds the appropriate checks for the port feature selector values and removes the unnecessary feature settings. It also rejects requests to set the TEST feature or to set or clear the INDICATOR and C_OVERCURRENT features, as none of these are relevant to dummy-hcd's root-hub emulation. CC: <stable(a)vger.kernel.org> Reported-and-tested-by: syzbot+5925509f78293baa7331(a)syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20201230162044.GA727759@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ab5e978b5052..1a953f44183a 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2118,9 +2118,21 @@ static int dummy_hub_control( dum_hcd->port_status &= ~USB_PORT_STAT_POWER; set_link_state(dum_hcd); break; - default: + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; } break; case GetHubDescriptor: @@ -2281,18 +2293,17 @@ static int dummy_hub_control( */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; default: - if (hcd->speed == HCD_USB3) { - if ((dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - } else - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - set_link_state(dum_hcd); + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; } break; case GetPortErrorCount:

4 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror