- Linux-stable-mirror - lists.linaro.org

[PATCH] x86/bugs: Fix use of possibly uninit value in amd_check_tsa_microcode()

by Michael Zhivich

Note: I believe this change only applies to stable backports. For kernels compiled with CONFIG_INIT_STACK_NONE=y, the value of __reserved bitfield in zen_patch_rev union on the stack may be garbage. If so, it will prevent correct microcode check when consulting p.ucode_rev, resulting in incorrect mitigation selection. Signed-off-by: Michael Zhivich <mzhivich(a)akamai.com> Fixes: 7a0395f6607a ("x86/bugs: Add a Transient Scheduler Attacks mitigation") --- arch/x86/kernel/cpu/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index efd42ee9d1cc..91b21814ce8c 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -371,7 +371,7 @@ static void bsp_determine_snp(struct cpuinfo_x86 *c) static bool amd_check_tsa_microcode(void) { struct cpuinfo_x86 *c = &boot_cpu_data; - union zen_patch_rev p; + union zen_patch_rev p = {0}; u32 min_rev = 0; p.ext_fam = c->x86 - 0xf; -- 2.34.1

5 months, 1 week

3
2
0 0

[PATCH] scsi: ufs: exynos: fix programming of HCI_UTRL_NEXUS_TYPE

by André Draszik

On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write. Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs") Cc: stable(a)vger.kernel.org Signed-off-by: André Draszik <andre.draszik(a)linaro.org> --- drivers/ufs/host/ufs-exynos.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c index 3e545af536e53e06b66c624ed0dc6dc7de13549f..f0adcd9dd553d2e630c75e8c3220e21bc5f7c8d8 100644 --- a/drivers/ufs/host/ufs-exynos.c +++ b/drivers/ufs/host/ufs-exynos.c @@ -1110,8 +1110,8 @@ static int exynos_ufs_post_link(struct ufs_hba *hba) hci_writel(ufs, val, HCI_TXPRDT_ENTRY_SIZE); hci_writel(ufs, ilog2(DATA_UNIT_SIZE), HCI_RXPRDT_ENTRY_SIZE); - hci_writel(ufs, (1 << hba->nutrs) - 1, HCI_UTRL_NEXUS_TYPE); - hci_writel(ufs, (1 << hba->nutmrs) - 1, HCI_UTMRL_NEXUS_TYPE); + hci_writel(ufs, BIT(hba->nutrs) - 1, HCI_UTRL_NEXUS_TYPE); + hci_writel(ufs, BIT(hba->nutmrs) - 1, HCI_UTMRL_NEXUS_TYPE); hci_writel(ufs, 0xf, HCI_AXIDMA_RWDATA_BURST_LEN); if (ufs->opts & EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB) --- base-commit: 50c8770a42faf8b1c7abe93e7c114337f580a97d change-id: 20250707-ufs-exynos-shift-b6d1084e28c4 Best regards, -- André Draszik <andre.draszik(a)linaro.org>

5 months, 1 week

4
4
0 0

[PATCH] mm/damon/ops-common: ignore migration request to invalid nodes

by SeongJae Park

damon_migrate_pages() try migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for move_pages() system call. Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") # 6.11.x Cc: stable(a)vger.kernel.org Cc: Honggyu Kim <honggyu.kim(a)sk.com> Signed-off-by: SeongJae Park <sj(a)kernel.org> --- mm/damon/ops-common.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/damon/ops-common.c b/mm/damon/ops-common.c index 6a9797d1d7ff..99321ff5cb92 100644 --- a/mm/damon/ops-common.c +++ b/mm/damon/ops-common.c @@ -383,6 +383,10 @@ unsigned long damon_migrate_pages(struct list_head *folio_list, int target_nid) if (list_empty(folio_list)) return nr_migrated; + if (target_nid < 0 || target_nid >= MAX_NUMNODES || + !node_state(target_nid, N_MEMORY)) + return nr_migrated; + noreclaim_flag = memalloc_noreclaim_save(); nid = folio_nid(lru_to_folio(folio_list)); base-commit: e2c90d41402c324ea81fa3d9c2c1d0f61906c161 -- 2.39.5

5 months, 1 week

3
4
0 0

+ mm-damon-ops-common-ignore-migration-request-to-invalid-nodes.patch added to mm-unstable branch

by Andrew Morton

The patch titled Subject: mm/damon/ops-common: ignore migration request to invalid nodes has been added to the -mm mm-unstable branch. Its filename is mm-damon-ops-common-ignore-migration-request-to-invalid-nodes.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: SeongJae Park <sj(a)kernel.org> Subject: mm/damon/ops-common: ignore migration request to invalid nodes Date: Sun, 20 Jul 2025 11:58:22 -0700 damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call. Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x] Signed-off-by: SeongJae Park <sj(a)kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy(a)gmail.com> Cc: Honggyu Kim <honggyu.kim(a)sk.com> Cc: Hyeongtak Ji <hyeongtak.ji(a)sk.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/damon/ops-common.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/mm/damon/ops-common.c~mm-damon-ops-common-ignore-migration-request-to-invalid-nodes +++ a/mm/damon/ops-common.c @@ -383,6 +383,10 @@ unsigned long damon_migrate_pages(struct if (list_empty(folio_list)) return nr_migrated; + if (target_nid < 0 || target_nid >= MAX_NUMNODES || + !node_state(target_nid, N_MEMORY)) + return nr_migrated; + noreclaim_flag = memalloc_noreclaim_save(); nid = folio_nid(lru_to_folio(folio_list)); _ Patches currently in -mm which might be from sj(a)kernel.org are mm-damon-core-commit-damos_quota_goal-nid.patch mm-damon-sysfs-implement-refresh_ms-file-under-kdamond-directory.patch mm-damon-sysfs-implement-refresh_ms-file-internal-work.patch docs-admin-guide-mm-damon-usage-document-refresh_ms-file.patch docs-abi-damon-update-for-refresh_ms.patch mm-damon-ops-common-ignore-migration-request-to-invalid-nodes.patch

5 months, 1 week

1
0
0 0

[PATCH net v2] gve: Fix stuck TX queue for DQ queue format

by Harshitha Ramamurthy

From: Praveen Kaligineedi <pkaligineedi(a)google.com> gve_tx_timeout was calculating missed completions in a way that is only relevant in the GQ queue format. Additionally, it was attempting to disable device interrupts, which is not needed in either GQ or DQ queue formats. As a result, TX timeouts with the DQ queue format likely would have triggered early resets without kicking the queue at all. This patch drops the check for pending work altogether and always kicks the queue after validating the queue has not seen a TX timeout too recently. Cc: stable(a)vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet(a)google.com> Signed-off-by: Tim Hostetler <thostet(a)google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi(a)google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy(a)google.com> --- Changes in v2: -Refactor out gve_tx_timeout_try_q_kick to remove goto statements (Jakub Kicinski) --- drivers/net/ethernet/google/gve/gve_main.c | 67 ++++++++++++++++++++++++------------------- 1 file changed, 37 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index c3791cf23c87..2fdb58646132 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -1916,49 +1916,56 @@ static void gve_turnup_and_check_status(struct gve_priv *priv) gve_handle_link_status(priv, GVE_DEVICE_STATUS_LINK_STATUS_MASK & status); } -static void gve_tx_timeout(struct net_device *dev, unsigned int txqueue) +static struct gve_notify_block *gve_get_tx_notify_block(struct gve_priv *priv, + unsigned int txqueue) { - struct gve_notify_block *block; - struct gve_tx_ring *tx = NULL; - struct gve_priv *priv; - u32 last_nic_done; - u32 current_time; u32 ntfy_idx; - netdev_info(dev, "Timeout on tx queue, %d", txqueue); - priv = netdev_priv(dev); if (txqueue > priv->tx_cfg.num_queues) - goto reset; + return NULL; ntfy_idx = gve_tx_idx_to_ntfy(priv, txqueue); if (ntfy_idx >= priv->num_ntfy_blks) - goto reset; + return NULL; + + return &priv->ntfy_blocks[ntfy_idx]; +} + +static bool gve_tx_timeout_try_q_kick(struct gve_priv *priv, + unsigned int txqueue) +{ + struct gve_notify_block *block; + u32 current_time; - block = &priv->ntfy_blocks[ntfy_idx]; - tx = block->tx; + block = gve_get_tx_notify_block(priv, txqueue); + + if (!block) + return false; current_time = jiffies_to_msecs(jiffies); - if (tx->last_kick_msec + MIN_TX_TIMEOUT_GAP > current_time) - goto reset; + if (block->tx->last_kick_msec + MIN_TX_TIMEOUT_GAP > current_time) + return false; - /* Check to see if there are missed completions, which will allow us to - * kick the queue. - */ - last_nic_done = gve_tx_load_event_counter(priv, tx); - if (last_nic_done - tx->done) { - netdev_info(dev, "Kicking queue %d", txqueue); - iowrite32be(GVE_IRQ_MASK, gve_irq_doorbell(priv, block)); - napi_schedule(&block->napi); - tx->last_kick_msec = current_time; - goto out; - } // Else reset. + netdev_info(priv->dev, "Kicking queue %d", txqueue); + napi_schedule(&block->napi); + block->tx->last_kick_msec = current_time; + return true; +} -reset: - gve_schedule_reset(priv); +static void gve_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct gve_notify_block *block; + struct gve_priv *priv; -out: - if (tx) - tx->queue_timeout++; + netdev_info(dev, "Timeout on tx queue, %d", txqueue); + priv = netdev_priv(dev); + + if (!gve_tx_timeout_try_q_kick(priv, txqueue)) + gve_schedule_reset(priv); + + block = gve_get_tx_notify_block(priv, txqueue); + if (block) + block->tx->queue_timeout++; priv->tx_timeo_cnt++; } -- 2.50.0.727.gbf7dc18ff4-goog

5 months, 1 week

2
1
0 0

[PATCH net v2 0/2] selftests: mptcp: connect: cover alt modes

by Matthieu Baerts (NGI0)

mptcp_connect.sh can be executed manually with "-m <MODE>" and "-C" to make sure everything works as expected when using "mmap" and "sendfile" modes instead of "poll", and with the MPTCP checksum support. These modes should be validated, but they are not when the selftests are executed via the kselftest helpers. It means that most CIs validating these selftests, like NIPA for the net development trees and LKFT for the stable ones, are not covering these modes. To fix that, new test programs have been added, simply calling mptcp_connect.sh with the right parameters. The first patch can be backported up to v5.6, and the second one up to v5.14. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Changes in v2: - force using a different prefix in the subtests to avoid having the same test names in all mptcp_connect*.sh selftests. - Link to v1: https://lore.kernel.org/r/20250714-net-mptcp-sft-connect-alt-v1-0-bf1c5abbe… --- Matthieu Baerts (NGI0) (2): selftests: mptcp: connect: also cover alt modes selftests: mptcp: connect: also cover checksum tools/testing/selftests/net/mptcp/Makefile | 3 ++- tools/testing/selftests/net/mptcp/mptcp_connect_checksum.sh | 5 +++++ tools/testing/selftests/net/mptcp/mptcp_connect_mmap.sh | 5 +++++ tools/testing/selftests/net/mptcp/mptcp_connect_sendfile.sh | 5 +++++ 4 files changed, 17 insertions(+), 1 deletion(-) --- base-commit: b640daa2822a39ff76e70200cb2b7b892b896dce change-id: 20250714-net-mptcp-sft-connect-alt-c1aaf073ef4e Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

5 months, 1 week

4
8
0 0

[PATCH] KVM: arm64: Check for SYSREGS_ON_CPU before accessing the CPU state

by Marc Zyngier

Mark Brown reports that since we commit to making exceptions visible without the vcpu being loaded, the external abort selftest fails. Upon investigation, it turns out that the code that makes registers affected by an exception visible to the guest is completely broken on VHE, as we don't check whether the system registers are loaded on the CPU at this point. We managed to get away with this so far, but that's obviously as bad as it gets, Add the required checksm and document the absolute need to check for the SYSREGS_ON_CPU flag before calling into any of the __vcpu_write_sys_reg_to_cpu()__vcpu_read_sys_reg_from_cpu() helpers. Reported-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Marc Zyngier <maz(a)kernel.org> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/18535df8-e647-4643-af9a-bb780af03a70@sirena.org.uk --- arch/arm64/include/asm/kvm_host.h | 4 ++++ arch/arm64/kvm/hyp/exception.c | 6 ++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index df9c1e1e52025..831cec0e1239e 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -1169,6 +1169,8 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val) * System registers listed in the switch are not saved on every * exit from the guest but are only saved on vcpu_put. * + * SYSREGS_ON_CPU *MUST* be checked before using this helper. + * * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but * should never be listed below, because the guest cannot modify its * own MPIDR_EL1 and MPIDR_EL1 is accessed for VCPU A from VCPU B's @@ -1221,6 +1223,8 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg) * System registers listed in the switch are not restored on every * entry to the guest but are only restored on vcpu_load. * + * SYSREGS_ON_CPU *MUST* be checked before using this helper. + * * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but * should never be listed below, because the MPIDR should only be set * once, before running the VCPU, and never changed later. diff --git a/arch/arm64/kvm/hyp/exception.c b/arch/arm64/kvm/hyp/exception.c index 7dafd10e52e8c..95d186e0bf54f 100644 --- a/arch/arm64/kvm/hyp/exception.c +++ b/arch/arm64/kvm/hyp/exception.c @@ -26,7 +26,8 @@ static inline u64 __vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg) if (unlikely(vcpu_has_nv(vcpu))) return vcpu_read_sys_reg(vcpu, reg); - else if (__vcpu_read_sys_reg_from_cpu(reg, &val)) + else if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) && + __vcpu_read_sys_reg_from_cpu(reg, &val)) return val; return __vcpu_sys_reg(vcpu, reg); @@ -36,7 +37,8 @@ static inline void __vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg) { if (unlikely(vcpu_has_nv(vcpu))) vcpu_write_sys_reg(vcpu, val, reg); - else if (!__vcpu_write_sys_reg_to_cpu(val, reg)) + else if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU) || + !__vcpu_write_sys_reg_to_cpu(val, reg)) __vcpu_assign_sys_reg(vcpu, reg, val); } -- 2.39.2

5 months, 1 week

2
1
0 0

[PATCH 2/2] NFSD: Fix last write offset handling in layoutcommit

by Sergey Bashirov

The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> --- fs/nfsd/blocklayout.c | 5 ++--- fs/nfsd/nfs4proc.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 18 deletions(-) diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb440..0822d8a119c6f 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d88407..7043fc475458d 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out: -- 2.43.0

5 months, 1 week

2
1
0 0

[PATCH v2] kernel/fork: Increase minimum number of allowed threads

by Hauke Mehrtens

A modern Linux system creates much more than 20 threads at bootup. When I booted up OpenWrt in qemu the system sometimes failed to boot up when it wanted to create the 419th thread. The VM had 128MB RAM and the calculation in set_max_threads() calculated that max_threads should be set to 419. When the system booted up it tried to notify the user space about every device it created because CONFIG_UEVENT_HELPER was set and used. I counted 1299 calls to call_usermodehelper_setup(), all of them try to create a new thread and call the userspace hotplug script in it. This fixes bootup of Linux on systems with low memory. I saw the problem with qemu 10.0.2 using these commands: qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic Cc: stable(a)vger.kernel.org Signed-off-by: Hauke Mehrtens <hauke(a)hauke-m.de> --- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/fork.c b/kernel/fork.c index 7966c9a1c163..388299525f3c 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -115,7 +115,7 @@ /* * Minimum number of threads to boot the kernel */ -#define MIN_THREADS 20 +#define MIN_THREADS 600 /* * Maximum number of threads -- 2.50.1

5 months, 1 week

4
6
0 0

[PATCH net 5/5] e1000e: ignore uninitialized checksum word on tgp

by Tony Nguyen

From: Jacek Kowalski <jacek(a)jacekk.info> As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Unfortunately some systems have left the factory with an uninitialized value of 0xFFFF at register address 0x3F (checksum word location). So on Tiger Lake platform we ignore the computed checksum when such condition is encountered. Signed-off-by: Jacek Kowalski <jacek(a)jacekk.info> Tested-by: Vlad URSU <vlad(a)ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable(a)vger.kernel.org Reviewed-by: Simon Horman <horms(a)kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> --- drivers/net/ethernet/intel/e1000e/defines.h | 3 +++ drivers/net/ethernet/intel/e1000e/nvm.c | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 8294a7c4f122..ba331899d186 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -638,6 +638,9 @@ /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ #define NVM_SUM 0xBABA +/* Uninitialized ("empty") checksum word value */ +#define NVM_CHECKSUM_UNINITIALIZED 0xFFFF + /* PBA (printed board assembly) number words */ #define NVM_PBA_OFFSET_0 8 #define NVM_PBA_OFFSET_1 9 diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index e609f4df86f4..16369e6d245a 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -558,6 +558,12 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) checksum += nvm_data; } + if (hw->mac.type == e1000_pch_tgp && + nvm_data == NVM_CHECKSUM_UNINITIALIZED) { + e_dbg("Uninitialized NVM Checksum on TGP platform - ignoring\n"); + return 0; + } + if (checksum != (u16)NVM_SUM) { e_dbg("NVM Checksum Invalid\n"); return -E1000_ERR_NVM; -- 2.47.1

5 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror