- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] serial: 8250: fix panic due to PSLVERR" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 7f8fdd4dbffc05982b96caf586f77a014b2a9353 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081847-cheddar-glacier-ea0e@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7f8fdd4dbffc05982b96caf586f77a014b2a9353 Mon Sep 17 00:00:00 2001 From: Yunhui Cui <cuiyunhui(a)bytedance.com> Date: Wed, 23 Jul 2025 10:33:22 +0800 Subject: [PATCH] serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Reviewed-by: John Ogness <john.ogness(a)linutronix.de> Cc: stable <stable(a)kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7eddcab318b4..2da9db960d09 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2269,9 +2269,9 @@ static void serial8250_initialize(struct uart_port *port) { unsigned long flags; + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - uart_port_lock_irqsave(port, &flags); serial8250_init_mctrl(port); serial8250_iir_txen_test(port); uart_port_unlock_irqrestore(port, flags);

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] serial: 8250: fix panic due to PSLVERR" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 7f8fdd4dbffc05982b96caf586f77a014b2a9353 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081846-exquisite-previous-f76e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7f8fdd4dbffc05982b96caf586f77a014b2a9353 Mon Sep 17 00:00:00 2001 From: Yunhui Cui <cuiyunhui(a)bytedance.com> Date: Wed, 23 Jul 2025 10:33:22 +0800 Subject: [PATCH] serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Reviewed-by: John Ogness <john.ogness(a)linutronix.de> Cc: stable <stable(a)kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7eddcab318b4..2da9db960d09 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2269,9 +2269,9 @@ static void serial8250_initialize(struct uart_port *port) { unsigned long flags; + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - uart_port_lock_irqsave(port, &flags); serial8250_init_mctrl(port); serial8250_iir_txen_test(port); uart_port_unlock_irqrestore(port, flags);

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] usb: typec: fusb302: cache PD RX state" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 1e61f6ab08786d66a11cfc51e13d6f08a6b06c56 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081830-selected-dandelion-46ec@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1e61f6ab08786d66a11cfc51e13d6f08a6b06c56 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel <sebastian.reichel(a)collabora.com> Date: Fri, 4 Jul 2025 19:55:06 +0200 Subject: [PATCH] usb: typec: fusb302: cache PD RX state This patch fixes a race condition communication error, which ends up in PD hard resets when losing the race. Some systems, like the Radxa ROCK 5B are powered through USB-C without any backup power source and use a FUSB302 chip to do the PD negotiation. This means it is quite important to avoid hard resets, since that effectively kills the system's power-supply. I've found the following race condition while debugging unplanned power loss during booting the board every now and then: 1. lots of TCPM/FUSB302/PD initialization stuff 2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here) 3. the remote PD source does not send anything, so TCPM does a SOFT RESET 4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time (tcpm_set_pd_rx is enabled again, even though it is still on) At this point I've seen broken CRC good messages being send by the FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like messages are being lost and things generally going haywire with one of the two sides doing a hard reset once a broken CRC good message was send to the bus. I think the system is running into a race condition, that the FIFOs are being cleared and/or the automatic good CRC message generation flag is being updated while a message is already arriving. Let's avoid this by caching the PD RX enabled state, as we have already processed anything in the FIFOs and are in a good state. As a side effect that this also optimizes I2C bus usage :) As far as I can tell the problem theoretically also exists when TCPM enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less critical for the following reason: On devices like the ROCK 5B, which are powered through a TCPM backed USB-C port, the bootloader must have done some prior PD communication (initial communication must happen within 5 seconds after plugging the USB-C plug). This means the first time the kernel TCPM state machine reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages actively. On other devices a hard reset simply adds some extra delay and things should be good afterwards. Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index f2801279c4b5..a4ff2403ddd6 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -104,6 +104,7 @@ struct fusb302_chip { bool vconn_on; bool vbus_on; bool charge_on; + bool pd_rx_on; bool vbus_present; enum typec_cc_polarity cc_polarity; enum typec_cc_status cc1; @@ -841,6 +842,11 @@ static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) int ret = 0; mutex_lock(&chip->lock); + if (chip->pd_rx_on == on) { + fusb302_log(chip, "pd is already %s", str_on_off(on)); + goto done; + } + ret = fusb302_pd_rx_flush(chip); if (ret < 0) { fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret); @@ -863,6 +869,8 @@ static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) str_on_off(on), ret); goto done; } + + chip->pd_rx_on = on; fusb302_log(chip, "pd := %s", str_on_off(on)); done: mutex_unlock(&chip->lock);

4 months, 1 week

2
2
0 0

FAILED: patch "[PATCH] serial: 8250: fix panic due to PSLVERR" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 7f8fdd4dbffc05982b96caf586f77a014b2a9353 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081846-vanquish-fastball-b7d1@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7f8fdd4dbffc05982b96caf586f77a014b2a9353 Mon Sep 17 00:00:00 2001 From: Yunhui Cui <cuiyunhui(a)bytedance.com> Date: Wed, 23 Jul 2025 10:33:22 +0800 Subject: [PATCH] serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Reviewed-by: John Ogness <john.ogness(a)linutronix.de> Cc: stable <stable(a)kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7eddcab318b4..2da9db960d09 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2269,9 +2269,9 @@ static void serial8250_initialize(struct uart_port *port) { unsigned long flags; + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - uart_port_lock_irqsave(port, &flags); serial8250_init_mctrl(port); serial8250_iir_txen_test(port); uart_port_unlock_irqrestore(port, flags);

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] serial: 8250: fix panic due to PSLVERR" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x 7f8fdd4dbffc05982b96caf586f77a014b2a9353 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081845-enlarging-goldsmith-455a@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7f8fdd4dbffc05982b96caf586f77a014b2a9353 Mon Sep 17 00:00:00 2001 From: Yunhui Cui <cuiyunhui(a)bytedance.com> Date: Wed, 23 Jul 2025 10:33:22 +0800 Subject: [PATCH] serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Reviewed-by: John Ogness <john.ogness(a)linutronix.de> Cc: stable <stable(a)kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7eddcab318b4..2da9db960d09 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2269,9 +2269,9 @@ static void serial8250_initialize(struct uart_port *port) { unsigned long flags; + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - uart_port_lock_irqsave(port, &flags); serial8250_init_mctrl(port); serial8250_iir_txen_test(port); uart_port_unlock_irqrestore(port, flags);

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] serial: 8250: fix panic due to PSLVERR" failed to apply to 6.16-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.16-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.16.y git checkout FETCH_HEAD git cherry-pick -x 7f8fdd4dbffc05982b96caf586f77a014b2a9353 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081844-wimp-jubilance-539e@gregkh' --subject-prefix 'PATCH 6.16.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7f8fdd4dbffc05982b96caf586f77a014b2a9353 Mon Sep 17 00:00:00 2001 From: Yunhui Cui <cuiyunhui(a)bytedance.com> Date: Wed, 23 Jul 2025 10:33:22 +0800 Subject: [PATCH] serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Reviewed-by: John Ogness <john.ogness(a)linutronix.de> Cc: stable <stable(a)kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7eddcab318b4..2da9db960d09 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2269,9 +2269,9 @@ static void serial8250_initialize(struct uart_port *port) { unsigned long flags; + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - uart_port_lock_irqsave(port, &flags); serial8250_init_mctrl(port); serial8250_iir_txen_test(port); uart_port_unlock_irqrestore(port, flags);

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] cifs: reset iface weights when we cannot find a candidate" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 9d5eff7821f6d70f7d1b4d8a60680fba4de868a7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081845-cork-enable-a1e8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9d5eff7821f6d70f7d1b4d8a60680fba4de868a7 Mon Sep 17 00:00:00 2001 From: Shyam Prasad N <sprasad(a)microsoft.com> Date: Thu, 17 Jul 2025 17:36:13 +0530 Subject: [PATCH] cifs: reset iface weights when we cannot find a candidate We now do a weighted selection of server interfaces when allocating new channels. The weights are decided based on the speed advertised. The fulfilled weight for an interface is a counter that is used to track the interface selection. It should be reset back to zero once all interfaces fulfilling their weight. In cifs_chan_update_iface, this reset logic was missing. As a result when the server interface list changes, the client may not be able to find a new candidate for other channels after all interfaces have been fulfilled. Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed") Cc: <stable(a)vger.kernel.org> Signed-off-by: Shyam Prasad N <sprasad(a)microsoft.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index 330bc3d25bad..0a8c2fcc9ded 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -332,6 +332,7 @@ cifs_chan_update_iface(struct cifs_ses *ses, struct TCP_Server_Info *server) struct cifs_server_iface *old_iface = NULL; struct cifs_server_iface *last_iface = NULL; struct sockaddr_storage ss; + int retry = 0; spin_lock(&ses->chan_lock); chan_index = cifs_ses_get_chan_index(ses, server); @@ -360,6 +361,7 @@ cifs_chan_update_iface(struct cifs_ses *ses, struct TCP_Server_Info *server) return; } +try_again: last_iface = list_last_entry(&ses->iface_list, struct cifs_server_iface, iface_head); iface_min_speed = last_iface->speed; @@ -397,6 +399,13 @@ cifs_chan_update_iface(struct cifs_ses *ses, struct TCP_Server_Info *server) } if (list_entry_is_head(iface, &ses->iface_list, iface_head)) { + list_for_each_entry(iface, &ses->iface_list, iface_head) + iface->weight_fulfilled = 0; + + /* see if it can be satisfied in second attempt */ + if (!retry++) + goto try_again; + iface = NULL; cifs_dbg(FYI, "unable to find a suitable iface\n"); }

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mm/damon/ops-common: ignore migration request to invalid" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 7e6c3130690a01076efdf45aa02ba5d5c16849a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081833-booting-yelling-d0fa@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7e6c3130690a01076efdf45aa02ba5d5c16849a0 Mon Sep 17 00:00:00 2001 From: SeongJae Park <sj(a)kernel.org> Date: Sun, 20 Jul 2025 11:58:22 -0700 Subject: [PATCH] mm/damon/ops-common: ignore migration request to invalid nodes damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call. Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x] Signed-off-by: SeongJae Park <sj(a)kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy(a)gmail.com> Cc: Honggyu Kim <honggyu.kim(a)sk.com> Cc: Hyeongtak Ji <hyeongtak.ji(a)sk.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/damon/ops-common.c b/mm/damon/ops-common.c index 6a9797d1d7ff..99321ff5cb92 100644 --- a/mm/damon/ops-common.c +++ b/mm/damon/ops-common.c @@ -383,6 +383,10 @@ unsigned long damon_migrate_pages(struct list_head *folio_list, int target_nid) if (list_empty(folio_list)) return nr_migrated; + if (target_nid < 0 || target_nid >= MAX_NUMNODES || + !node_state(target_nid, N_MEMORY)) + return nr_migrated; + noreclaim_flag = memalloc_noreclaim_save(); nid = folio_nid(lru_to_folio(folio_list));

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mm/damon/ops-common: ignore migration request to invalid" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x 7e6c3130690a01076efdf45aa02ba5d5c16849a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081832-splendor-carve-f25b@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7e6c3130690a01076efdf45aa02ba5d5c16849a0 Mon Sep 17 00:00:00 2001 From: SeongJae Park <sj(a)kernel.org> Date: Sun, 20 Jul 2025 11:58:22 -0700 Subject: [PATCH] mm/damon/ops-common: ignore migration request to invalid nodes damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call. Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x] Signed-off-by: SeongJae Park <sj(a)kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy(a)gmail.com> Cc: Honggyu Kim <honggyu.kim(a)sk.com> Cc: Hyeongtak Ji <hyeongtak.ji(a)sk.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/damon/ops-common.c b/mm/damon/ops-common.c index 6a9797d1d7ff..99321ff5cb92 100644 --- a/mm/damon/ops-common.c +++ b/mm/damon/ops-common.c @@ -383,6 +383,10 @@ unsigned long damon_migrate_pages(struct list_head *folio_list, int target_nid) if (list_empty(folio_list)) return nr_migrated; + if (target_nid < 0 || target_nid >= MAX_NUMNODES || + !node_state(target_nid, N_MEMORY)) + return nr_migrated; + noreclaim_flag = memalloc_noreclaim_save(); nid = folio_nid(lru_to_folio(folio_list));

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mm/damon/ops-common: ignore migration request to invalid" failed to apply to 6.16-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.16-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.16.y git checkout FETCH_HEAD git cherry-pick -x 7e6c3130690a01076efdf45aa02ba5d5c16849a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081831-singular-geologist-93a6@gregkh' --subject-prefix 'PATCH 6.16.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7e6c3130690a01076efdf45aa02ba5d5c16849a0 Mon Sep 17 00:00:00 2001 From: SeongJae Park <sj(a)kernel.org> Date: Sun, 20 Jul 2025 11:58:22 -0700 Subject: [PATCH] mm/damon/ops-common: ignore migration request to invalid nodes damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call. Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x] Signed-off-by: SeongJae Park <sj(a)kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy(a)gmail.com> Cc: Honggyu Kim <honggyu.kim(a)sk.com> Cc: Hyeongtak Ji <hyeongtak.ji(a)sk.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/damon/ops-common.c b/mm/damon/ops-common.c index 6a9797d1d7ff..99321ff5cb92 100644 --- a/mm/damon/ops-common.c +++ b/mm/damon/ops-common.c @@ -383,6 +383,10 @@ unsigned long damon_migrate_pages(struct list_head *folio_list, int target_nid) if (list_empty(folio_list)) return nr_migrated; + if (target_nid < 0 || target_nid >= MAX_NUMNODES || + !node_state(target_nid, N_MEMORY)) + return nr_migrated; + noreclaim_flag = memalloc_noreclaim_save(); nid = folio_nid(lru_to_folio(folio_list));

4 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror