- Linux-stable-mirror - lists.linaro.org

[PATCH v4 4/6] misc: pci_endpoint_test: Fix irq_type to convey the correct type

by Kunihiko Hayashi

There are two variables that indicate the interrupt type to be used in the next test execution, "irq_type" as global and test->irq_type. The global is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). The type set in this function isn't reflected in the global "irq_type", so ioctl(PCITEST_GET_IRQTYPE) returns the previous type. As a result, the wrong type is displayed in old "pcitest" as follows: # pcitest -i 0 SET IRQ TYPE TO LEGACY: OKAY # pcitest -I GET IRQ TYPE: MSI And new "pcitest" in kselftest results in an error as follows: # RUN pci_ep_basic.LEGACY_IRQ_TEST ... # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1) # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type Fix this issue by propagating the current type to the global "irq_type". Cc: stable(a)vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Reviewed-by: Niklas Cassel <cassel(a)kernel.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index acf3d8dab131..896392c428de 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -833,6 +833,7 @@ static int pci_endpoint_test_set_irq(struct pci_endpoint_test *test, return ret; } + irq_type = test->irq_type; return 0; } -- 2.25.1

4 months

2
1
0 0

[PATCH 5/5] batman-adv: Ignore own maximum aggregation size during RX

by Simon Wunderlich

From: Sven Eckelmann <sven(a)narfation.org> An OGMv1 and OGMv2 packet receive processing were not only limited by the number of bytes in the received packet but also by the nodes maximum aggregation packet size limit. But this limit is relevant for TX and not for RX. It must not be enforced by batadv_(i)v_ogm_aggr_packet to avoid loss of information in case of a different limit for sender and receiver. This has a minor side effect for B.A.T.M.A.N. IV because the batadv_iv_ogm_aggr_packet is also used for the preprocessing for the TX. But since the aggregation code itself will not allow more than BATADV_MAX_AGGREGATION_BYTES bytes, this check was never triggering (in this context) prior of removing it. Cc: stable(a)vger.kernel.org Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_iv_ogm.c | 3 +-- net/batman-adv/bat_v_ogm.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 07ae5dd1f150..b12645949ae5 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -325,8 +325,7 @@ batadv_iv_ogm_aggr_packet(int buff_pos, int packet_len, /* check if there is enough space for the optional TVLV */ next_buff_pos += ntohs(ogm_packet->tvlv_len); - return (next_buff_pos <= packet_len) && - (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES); + return next_buff_pos <= packet_len; } /* send a batman ogm to a given interface */ diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c index e503ee0d896b..8f89ffe6020c 100644 --- a/net/batman-adv/bat_v_ogm.c +++ b/net/batman-adv/bat_v_ogm.c @@ -839,8 +839,7 @@ batadv_v_ogm_aggr_packet(int buff_pos, int packet_len, /* check if there is enough space for the optional TVLV */ next_buff_pos += ntohs(ogm2_packet->tvlv_len); - return (next_buff_pos <= packet_len) && - (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES); + return next_buff_pos <= packet_len; } /** -- 2.39.5

4 months

1
0
0 0

[PATCH 4/5] batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()

by Simon Wunderlich

From: Remi Pommarel <repk(a)triplefau.lt> Since commit 4436df478860 ("batman-adv: Add flex array to struct batadv_tvlv_tt_data"), the introduction of batadv_tvlv_tt_data's flex array member in batadv_tt_tvlv_ogm_handler_v1() put tt_changes at invalid offset. Those TT changes are supposed to be filled from the end of batadv_tvlv_tt_data structure (including vlan_data flexible array), but only the flex array size is taken into account missing completely the size of the fixed part of the structure itself. Fix the tt_change offset computation by using struct_size() instead of flex_array_size() so both flex array member and its container structure sizes are taken into account. Cc: stable(a)vger.kernel.org Fixes: 4436df478860 ("batman-adv: Add flex array to struct batadv_tvlv_tt_data") Signed-off-by: Remi Pommarel <repk(a)triplefau.lt> Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/translation-table.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 760d51fdbdf6..7d5de4cbb814 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -3959,23 +3959,21 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tt_data; u16 num_entries, num_vlan; - size_t flex_size; + size_t tt_data_sz; if (tvlv_value_len < sizeof(*tt_data)) return; tt_data = tvlv_value; - tvlv_value_len -= sizeof(*tt_data); - num_vlan = ntohs(tt_data->num_vlan); - flex_size = flex_array_size(tt_data, vlan_data, num_vlan); - if (tvlv_value_len < flex_size) + tt_data_sz = struct_size(tt_data, vlan_data, num_vlan); + if (tvlv_value_len < tt_data_sz) return; tt_change = (struct batadv_tvlv_tt_change *)((void *)tt_data - + flex_size); - tvlv_value_len -= flex_size; + + tt_data_sz); + tvlv_value_len -= tt_data_sz; num_entries = batadv_tt_entries(tvlv_value_len); -- 2.39.5

4 months

1
0
0 0

[PATCH 3/5] batman-adv: Drop unmanaged ELP metric worker

by Simon Wunderlich

From: Sven Eckelmann <sven(a)narfation.org> The ELP worker needs to calculate new metric values for all neighbors "reachable" over an interface. Some of the used metric sources require locks which might need to sleep. This sleep is incompatible with the RCU list iterator used for the recorded neighbors. The initial approach to work around of this problem was to queue another work item per neighbor and then run this in a new context. Even when this solved the RCU vs might_sleep() conflict, it has a major problems: Nothing was stopping the work item in case it is not needed anymore - for example because one of the related interfaces was removed or the batman-adv module was unloaded - resulting in potential invalid memory accesses. Directly canceling the metric worker also has various problems: * cancel_work_sync for a to-be-deactivated interface is called with rtnl_lock held. But the code in the ELP metric worker also tries to use rtnl_lock() - which will never return in this case. This also means that cancel_work_sync would never return because it is waiting for the worker to finish. * iterating over the neighbor list for the to-be-deactivated interface is currently done using the RCU specific methods. Which means that it is possible to miss items when iterating over it without the associated spinlock - a behaviour which is acceptable for a periodic metric check but not for a cleanup routine (which must "stop" all still running workers) The better approch is to get rid of the per interface neighbor metric worker and handle everything in the interface worker. The original problems are solved by: * creating a list of neighbors which require new metric information inside the RCU protected context, gathering the metric according to the new list outside the RCU protected context * only use rcu_trylock inside metric gathering code to avoid a deadlock when the cancel_delayed_work_sync is called in the interface removal code (which is called with the rtnl_lock held) Cc: stable(a)vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_v.c | 2 -- net/batman-adv/bat_v_elp.c | 71 ++++++++++++++++++++++++++------------ net/batman-adv/bat_v_elp.h | 2 -- net/batman-adv/types.h | 3 -- 4 files changed, 48 insertions(+), 30 deletions(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index ac11f1f08db0..d35479c465e2 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -113,8 +113,6 @@ static void batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh) { ewma_throughput_init(&hardif_neigh->bat_v.throughput); - INIT_WORK(&hardif_neigh->bat_v.metric_work, - batadv_v_elp_throughput_metric_update); } /** diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 65e52de52bcd..b065578b4436 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -18,6 +18,7 @@ #include <linux/if_ether.h> #include <linux/jiffies.h> #include <linux/kref.h> +#include <linux/list.h> #include <linux/minmax.h> #include <linux/netdevice.h> #include <linux/nl80211.h> @@ -26,6 +27,7 @@ #include <linux/rcupdate.h> #include <linux/rtnetlink.h> #include <linux/skbuff.h> +#include <linux/slab.h> #include <linux/stddef.h> #include <linux/string.h> #include <linux/types.h> @@ -41,6 +43,18 @@ #include "routing.h" #include "send.h" +/** + * struct batadv_v_metric_queue_entry - list of hardif neighbors which require + * and metric update + */ +struct batadv_v_metric_queue_entry { + /** @hardif_neigh: hardif neighbor scheduled for metric update */ + struct batadv_hardif_neigh_node *hardif_neigh; + + /** @list: list node for metric_queue */ + struct list_head list; +}; + /** * batadv_v_elp_start_timer() - restart timer for ELP periodic work * @hard_iface: the interface for which the timer has to be reset @@ -137,10 +151,17 @@ static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, goto default_throughput; } + /* only use rtnl_trylock because the elp worker will be cancelled while + * the rntl_lock is held. the cancel_delayed_work_sync() would otherwise + * wait forever when the elp work_item was started and it is then also + * trying to rtnl_lock + */ + if (!rtnl_trylock()) + return false; + /* if not a wifi interface, check if this device provides data via * ethtool (e.g. an Ethernet adapter) */ - rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); if (ret == 0) { @@ -175,31 +196,19 @@ static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, /** * batadv_v_elp_throughput_metric_update() - worker updating the throughput * metric of a single hop neighbour - * @work: the work queue item + * @neigh: the neighbour to probe */ -void batadv_v_elp_throughput_metric_update(struct work_struct *work) +static void +batadv_v_elp_throughput_metric_update(struct batadv_hardif_neigh_node *neigh) { - struct batadv_hardif_neigh_node_bat_v *neigh_bat_v; - struct batadv_hardif_neigh_node *neigh; u32 throughput; bool valid; - neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v, - metric_work); - neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node, - bat_v); - valid = batadv_v_elp_get_throughput(neigh, &throughput); if (!valid) - goto put_neigh; + return; ewma_throughput_add(&neigh->bat_v.throughput, throughput); - -put_neigh: - /* decrement refcounter to balance increment performed before scheduling - * this task - */ - batadv_hardif_neigh_put(neigh); } /** @@ -273,14 +282,16 @@ batadv_v_elp_wifi_neigh_probe(struct batadv_hardif_neigh_node *neigh) */ static void batadv_v_elp_periodic_work(struct work_struct *work) { + struct batadv_v_metric_queue_entry *metric_entry; + struct batadv_v_metric_queue_entry *metric_safe; struct batadv_hardif_neigh_node *hardif_neigh; struct batadv_hard_iface *hard_iface; struct batadv_hard_iface_bat_v *bat_v; struct batadv_elp_packet *elp_packet; + struct list_head metric_queue; struct batadv_priv *bat_priv; struct sk_buff *skb; u32 elp_interval; - bool ret; bat_v = container_of(work, struct batadv_hard_iface_bat_v, elp_wq.work); hard_iface = container_of(bat_v, struct batadv_hard_iface, bat_v); @@ -316,6 +327,8 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) atomic_inc(&hard_iface->bat_v.elp_seqno); + INIT_LIST_HEAD(&metric_queue); + /* The throughput metric is updated on each sent packet. This way, if a * node is dead and no longer sends packets, batman-adv is still able to * react timely to its death. @@ -340,16 +353,28 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) /* Reading the estimated throughput from cfg80211 is a task that * may sleep and that is not allowed in an rcu protected - * context. Therefore schedule a task for that. + * context. Therefore add it to metric_queue and process it + * outside rcu protected context. */ - ret = queue_work(batadv_event_workqueue, - &hardif_neigh->bat_v.metric_work); - - if (!ret) + metric_entry = kzalloc(sizeof(*metric_entry), GFP_ATOMIC); + if (!metric_entry) { batadv_hardif_neigh_put(hardif_neigh); + continue; + } + + metric_entry->hardif_neigh = hardif_neigh; + list_add(&metric_entry->list, &metric_queue); } rcu_read_unlock(); + list_for_each_entry_safe(metric_entry, metric_safe, &metric_queue, list) { + batadv_v_elp_throughput_metric_update(metric_entry->hardif_neigh); + + batadv_hardif_neigh_put(metric_entry->hardif_neigh); + list_del(&metric_entry->list); + kfree(metric_entry); + } + restart_timer: batadv_v_elp_start_timer(hard_iface); out: diff --git a/net/batman-adv/bat_v_elp.h b/net/batman-adv/bat_v_elp.h index 9e2740195fa2..c9cb0a307100 100644 --- a/net/batman-adv/bat_v_elp.h +++ b/net/batman-adv/bat_v_elp.h @@ -10,7 +10,6 @@ #include "main.h" #include <linux/skbuff.h> -#include <linux/workqueue.h> int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface); void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface); @@ -19,6 +18,5 @@ void batadv_v_elp_iface_activate(struct batadv_hard_iface *primary_iface, void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface); int batadv_v_elp_packet_recv(struct sk_buff *skb, struct batadv_hard_iface *if_incoming); -void batadv_v_elp_throughput_metric_update(struct work_struct *work); #endif /* _NET_BATMAN_ADV_BAT_V_ELP_H_ */ diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 04f6398b3a40..85a50096f5b2 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -596,9 +596,6 @@ struct batadv_hardif_neigh_node_bat_v { * neighbor */ unsigned long last_unicast_tx; - - /** @metric_work: work queue callback item for metric update */ - struct work_struct metric_work; }; /** -- 2.39.5

4 months

1
0
0 0

[PATCH 2/5] batman-adv: Ignore neighbor throughput metrics in error case

by Simon Wunderlich

From: Sven Eckelmann <sven(a)narfation.org> If a temporary error happened in the evaluation of the neighbor throughput information, then the invalid throughput result should not be stored in the throughtput EWMA. Cc: stable(a)vger.kernel.org Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_v_elp.c | 50 ++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 16 deletions(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index fbf499bcc671..65e52de52bcd 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -59,11 +59,13 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface) /** * batadv_v_elp_get_throughput() - get the throughput towards a neighbour * @neigh: the neighbour for which the throughput has to be obtained + * @pthroughput: calculated throughput towards the given neighbour in multiples + * of 100kpbs (a value of '1' equals 0.1Mbps, '10' equals 1Mbps, etc). * - * Return: The throughput towards the given neighbour in multiples of 100kpbs - * (a value of '1' equals 0.1Mbps, '10' equals 1Mbps, etc). + * Return: true when value behind @pthroughput was set */ -static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) +static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, + u32 *pthroughput) { struct batadv_hard_iface *hard_iface = neigh->if_incoming; struct net_device *soft_iface = hard_iface->soft_iface; @@ -77,14 +79,16 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) * batman-adv interface */ if (!soft_iface) - return BATADV_THROUGHPUT_DEFAULT_VALUE; + return false; /* if the user specified a customised value for this interface, then * return it directly */ throughput = atomic_read(&hard_iface->bat_v.throughput_override); - if (throughput != 0) - return throughput; + if (throughput != 0) { + *pthroughput = throughput; + return true; + } /* if this is a wireless device, then ask its throughput through * cfg80211 API @@ -111,19 +115,24 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) * possible to delete this neighbor. For now set * the throughput metric to 0. */ - return 0; + *pthroughput = 0; + return true; } if (ret) goto default_throughput; - if (sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)) - return sinfo.expected_throughput / 100; + if (sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)) { + *pthroughput = sinfo.expected_throughput / 100; + return true; + } /* try to estimate the expected throughput based on reported tx * rates */ - if (sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE)) - return cfg80211_calculate_bitrate(&sinfo.txrate) / 3; + if (sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE)) { + *pthroughput = cfg80211_calculate_bitrate(&sinfo.txrate) / 3; + return true; + } goto default_throughput; } @@ -142,8 +151,10 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX; throughput = link_settings.base.speed; - if (throughput && throughput != SPEED_UNKNOWN) - return throughput * 10; + if (throughput && throughput != SPEED_UNKNOWN) { + *pthroughput = throughput * 10; + return true; + } } default_throughput: @@ -157,7 +168,8 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) } /* if none of the above cases apply, return the base_throughput */ - return BATADV_THROUGHPUT_DEFAULT_VALUE; + *pthroughput = BATADV_THROUGHPUT_DEFAULT_VALUE; + return true; } /** @@ -169,15 +181,21 @@ void batadv_v_elp_throughput_metric_update(struct work_struct *work) { struct batadv_hardif_neigh_node_bat_v *neigh_bat_v; struct batadv_hardif_neigh_node *neigh; + u32 throughput; + bool valid; neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v, metric_work); neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node, bat_v); - ewma_throughput_add(&neigh->bat_v.throughput, - batadv_v_elp_get_throughput(neigh)); + valid = batadv_v_elp_get_throughput(neigh, &throughput); + if (!valid) + goto put_neigh; + + ewma_throughput_add(&neigh->bat_v.throughput, throughput); +put_neigh: /* decrement refcounter to balance increment performed before scheduling * this task */ -- 2.39.5

4 months

1
0
0 0

[PATCH 1/5] batman-adv: fix panic during interface removal

by Simon Wunderlich

From: Andy Strohman <andrew(a)andrewstrohman.com> Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. Cc: stable(a)vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Andy Strohman <andrew(a)andrewstrohman.com> [sven(a)narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface] Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_v_elp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 1d704574e6bf..fbf499bcc671 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -66,12 +66,19 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface) static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) { struct batadv_hard_iface *hard_iface = neigh->if_incoming; + struct net_device *soft_iface = hard_iface->soft_iface; struct ethtool_link_ksettings link_settings; struct net_device *real_netdev; struct station_info sinfo; u32 throughput; int ret; + /* don't query throughput when no longer associated with any + * batman-adv interface + */ + if (!soft_iface) + return BATADV_THROUGHPUT_DEFAULT_VALUE; + /* if the user specified a customised value for this interface, then * return it directly */ @@ -141,7 +148,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) default_throughput: if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) { - batadv_info(hard_iface->soft_iface, + batadv_info(soft_iface, "WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %u.%1u Mbps. Consider overriding the throughput manually or checking your driver.\n", hard_iface->net_dev->name, BATADV_THROUGHPUT_DEFAULT_VALUE / 10, -- 2.39.5

4 months

1
0
0 0

[PATCH stable 6.6] lib/buildid: Handle memfd_secret() files in build_id_parse()

by Chen Linxuan

Backport of a similar change from commit 5ac9b4e935df ("lib/buildid: Handle memfd_secret() files in build_id_parse()") to address an issue where accessing secret memfd contents through build_id_parse() would trigger faults. Original report and repro can be found in [0]. [0] https://lore.kernel.org/bpf/ZwyG8Uro%2FSyTXAni@ly-workstation/ This repro will cause BUG: unable to handle kernel paging request in build_id_parse in 5.15/6.1/6.6. Some other discussions can be found in [1]. [1] https://lore.kernel.org/bpf/20241104175256.2327164-1-jolsa@kernel.org/T/#u Cc: stable(a)vger.kernel.org Fixes: 88a16a130933 ("perf: Add build id data in mmap2 event") Signed-off-by: Chen Linxuan <chenlinxuan(a)deepin.org> --- lib/buildid.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/lib/buildid.c b/lib/buildid.c index 9fc46366597e..9db35305f257 100644 --- a/lib/buildid.c +++ b/lib/buildid.c @@ -5,6 +5,7 @@ #include <linux/elf.h> #include <linux/kernel.h> #include <linux/pagemap.h> +#include <linux/secretmem.h> #define BUILD_ID 3 @@ -157,6 +158,12 @@ int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id, if (!vma->vm_file) return -EINVAL; +#ifdef CONFIG_SECRETMEM + /* reject secretmem folios created with memfd_secret() */ + if (vma->vm_file->f_mapping->a_ops == &secretmem_aops) + return -EFAULT; +#endif + page = find_get_page(vma->vm_file->f_mapping, 0); if (!page) return -EFAULT; /* page not mapped */ -- 2.48.1

4 months

4
5
0 0

FAILED: patch "[PATCH] userfaultfd: fix PTE unmapping stack-allocated PTE copies" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 927e926d72d9155fde3264459fe9bfd7b5e40d28 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025030948-playhouse-strongman-c9c3@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 927e926d72d9155fde3264459fe9bfd7b5e40d28 Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan <surenb(a)google.com> Date: Wed, 26 Feb 2025 10:55:09 -0800 Subject: [PATCH] userfaultfd: fix PTE unmapping stack-allocated PTE copies Current implementation of move_pages_pte() copies source and destination PTEs in order to detect concurrent changes to PTEs involved in the move. However these copies are also used to unmap the PTEs, which will fail if CONFIG_HIGHPTE is enabled because the copies are allocated on the stack. Fix this by using the actual PTEs which were kmap()ed. Link: https://lkml.kernel.org/r/20250226185510.2732648-3-surenb@google.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Reported-by: Peter Xu <peterx(a)redhat.com> Reviewed-by: Peter Xu <peterx(a)redhat.com> Cc: Andrea Arcangeli <aarcange(a)redhat.com> Cc: Barry Song <21cnbao(a)gmail.com> Cc: Barry Song <v-songbaohua(a)oppo.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Hugh Dickins <hughd(a)google.com> Cc: Jann Horn <jannh(a)google.com> Cc: Kalesh Singh <kaleshsingh(a)google.com> Cc: Liam R. Howlett <Liam.Howlett(a)Oracle.com> Cc: Lokesh Gidra <lokeshgidra(a)google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Matthew Wilcow (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index f5c6b3454f76..d06453fa8aba 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -1290,8 +1290,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, spin_unlock(src_ptl); if (!locked) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; /* now we can block and wait */ folio_lock(src_folio); @@ -1307,8 +1307,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, /* at this point we have src_folio locked */ if (folio_test_large(src_folio)) { /* split_folio() can block */ - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; err = split_folio(src_folio); if (err) @@ -1333,8 +1333,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, goto out; } if (!anon_vma_trylock_write(src_anon_vma)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; /* now we can block and wait */ anon_vma_lock_write(src_anon_vma); @@ -1352,8 +1352,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, entry = pte_to_swp_entry(orig_src_pte); if (non_swap_entry(entry)) { if (is_migration_entry(entry)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; migration_entry_wait(mm, src_pmd, src_addr); err = -EAGAIN; @@ -1396,8 +1396,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, src_folio = folio; src_folio_pte = orig_src_pte; if (!folio_trylock(src_folio)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; put_swap_device(si); si = NULL;

4 months

3
2
0 0

FAILED: patch "[PATCH] userfaultfd: fix PTE unmapping stack-allocated PTE copies" failed to apply to 6.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.13.y git checkout FETCH_HEAD git cherry-pick -x 927e926d72d9155fde3264459fe9bfd7b5e40d28 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025030947-disloyal-bust-0d23@gregkh' --subject-prefix 'PATCH 6.13.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 927e926d72d9155fde3264459fe9bfd7b5e40d28 Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan <surenb(a)google.com> Date: Wed, 26 Feb 2025 10:55:09 -0800 Subject: [PATCH] userfaultfd: fix PTE unmapping stack-allocated PTE copies Current implementation of move_pages_pte() copies source and destination PTEs in order to detect concurrent changes to PTEs involved in the move. However these copies are also used to unmap the PTEs, which will fail if CONFIG_HIGHPTE is enabled because the copies are allocated on the stack. Fix this by using the actual PTEs which were kmap()ed. Link: https://lkml.kernel.org/r/20250226185510.2732648-3-surenb@google.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Reported-by: Peter Xu <peterx(a)redhat.com> Reviewed-by: Peter Xu <peterx(a)redhat.com> Cc: Andrea Arcangeli <aarcange(a)redhat.com> Cc: Barry Song <21cnbao(a)gmail.com> Cc: Barry Song <v-songbaohua(a)oppo.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Hugh Dickins <hughd(a)google.com> Cc: Jann Horn <jannh(a)google.com> Cc: Kalesh Singh <kaleshsingh(a)google.com> Cc: Liam R. Howlett <Liam.Howlett(a)Oracle.com> Cc: Lokesh Gidra <lokeshgidra(a)google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Matthew Wilcow (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index f5c6b3454f76..d06453fa8aba 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -1290,8 +1290,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, spin_unlock(src_ptl); if (!locked) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; /* now we can block and wait */ folio_lock(src_folio); @@ -1307,8 +1307,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, /* at this point we have src_folio locked */ if (folio_test_large(src_folio)) { /* split_folio() can block */ - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; err = split_folio(src_folio); if (err) @@ -1333,8 +1333,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, goto out; } if (!anon_vma_trylock_write(src_anon_vma)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; /* now we can block and wait */ anon_vma_lock_write(src_anon_vma); @@ -1352,8 +1352,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, entry = pte_to_swp_entry(orig_src_pte); if (non_swap_entry(entry)) { if (is_migration_entry(entry)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; migration_entry_wait(mm, src_pmd, src_addr); err = -EAGAIN; @@ -1396,8 +1396,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, src_folio = folio; src_folio_pte = orig_src_pte; if (!folio_trylock(src_folio)) { - pte_unmap(&orig_src_pte); - pte_unmap(&orig_dst_pte); + pte_unmap(src_pte); + pte_unmap(dst_pte); src_pte = dst_pte = NULL; put_swap_device(si); si = NULL;

4 months

3
2
0 0

Re: [PATCH] drm/ttm/tests: fix potential null pointer dereference in ttm_bo_unreserve_bulk()

by Qasim Ijaz

On Thu, Mar 13, 2025 at 03:20:34PM +0100, Christian König wrote: > Am 11.03.25 um 20:01 schrieb Qasim Ijaz: > > In the ttm_bo_unreserve_bulk() test function, resv is allocated > > using kunit_kzalloc(), but the subsequent assertion mistakenly > > verifies the ttm_dev pointer instead of checking the resv pointer. > > This mistake means that if allocation for resv fails, the error will > > go undetected, resv will be NULL and a call to dma_resv_init(resv) > > The description here is correct, but the subject line is a bit misleading. > > Please use something like this instead "drm/ttm/tests: incorrect assert in ttm_bo_unreserve_bulk()". > > > will dereference a NULL pointer. > > That irrelevant, an allocation failure will result in a NULL pointer deref anyway. This is just an unit test. > > > > > Fix the assertion to properly verify the resv pointer. > > > > Fixes: 588c4c8d58c4 ("drm/ttm/tests: Fix a warning in ttm_bo_unreserve_bulk") > > Cc: stable(a)vger.kernel.org > > Please drop those tags. This is just an unit test, not relevant for stability and therefore shouldn't be backported. > > Regards, > Christian. > Thank you for the feedback Christian, I will resend a new patch with the changes you described. Thanks, Qasim. > > Signed-off-by: Qasim Ijaz <qasdev00(a)gmail.com> > > --- > > drivers/gpu/drm/ttm/tests/ttm_bo_test.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/ttm/tests/ttm_bo_test.c b/drivers/gpu/drm/ttm/tests/ttm_bo_test.c > > index f8f20d2f6174..e08e5a138420 100644 > > --- a/drivers/gpu/drm/ttm/tests/ttm_bo_test.c > > +++ b/drivers/gpu/drm/ttm/tests/ttm_bo_test.c > > @@ -340,7 +340,7 @@ static void ttm_bo_unreserve_bulk(struct kunit *test) > > KUNIT_ASSERT_NOT_NULL(test, ttm_dev); > > > > resv = kunit_kzalloc(test, sizeof(*resv), GFP_KERNEL); > > - KUNIT_ASSERT_NOT_NULL(test, ttm_dev); > > + KUNIT_ASSERT_NOT_NULL(test, resv); > > > > err = ttm_device_kunit_init(priv, ttm_dev, false, false); > > KUNIT_ASSERT_EQ(test, err, 0); >

4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror