- Linux-stable-mirror - lists.linaro.org

[PATCH 6.12.y] net/mlx5: HWS, change error flow on matcher disconnect

by Subramaniam, Sujana

From: Sujana Subramaniam <sujana.subramaniam(a)sap.com> [ Upstream commit 1ce840c7a659aa53a31ef49f0271b4fd0dc10296 ] Currently, when firmware failure occurs during matcher disconnect flow, the error flow of the function reconnects the matcher back and returns an error, which continues running the calling function and eventually frees the matcher that is being disconnected. This leads to a case where we have a freed matcher on the matchers list, which in turn leads to use-after-free and eventual crash. This patch fixes that by not trying to reconnect the matcher back when some FW command fails during disconnect. Note that we're dealing here with FW error. We can't overcome this problem. This might lead to bad steering state (e.g. wrong connection between matchers), and will also lead to resource leakage, as it is the case with any other error handling during resource destruction. However, the goal here is to allow the driver to continue and not crash the machine with use-after-free error. Signed-off-by: Yevgeny Kliteynik <kliteyn(a)nvidia.com> Signed-off-by: Itamar Gozlan <igozlan(a)nvidia.com> Reviewed-by: Mark Bloch <mbloch(a)nvidia.com> Signed-off-by: Tariq Toukan <tariqt(a)nvidia.com> Link: https://patch.msgid.link/20250102181415.1477316-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Jan Alexander Preissler <akendo(a)akendo.eu> Signed-off-by: Sujana Subramaniam <sujana.subramaniam(a)sap.com> --- .../mlx5/core/steering/hws/mlx5hws_matcher.c | 24 +++++++------------ 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws_matcher.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws_matcher.c index 61a1155d4b4f..ce541c60c5b4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws_matcher.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws_matcher.c @@ -165,14 +165,14 @@ static int hws_matcher_disconnect(struct mlx5hws_matcher *matcher) next->match_ste.rtc_0_id, next->match_ste.rtc_1_id); if (ret) { - mlx5hws_err(tbl->ctx, "Failed to disconnect matcher\n"); - goto matcher_reconnect; + mlx5hws_err(tbl->ctx, "Fatal error, failed to disconnect matcher\n"); + return ret; } } else { ret = mlx5hws_table_connect_to_miss_table(tbl, tbl->default_miss.miss_tbl); if (ret) { - mlx5hws_err(tbl->ctx, "Failed to disconnect last matcher\n"); - goto matcher_reconnect; + mlx5hws_err(tbl->ctx, "Fatal error, failed to disconnect last matcher\n"); + return ret; } } @@ -180,27 +180,19 @@ static int hws_matcher_disconnect(struct mlx5hws_matcher *matcher) if (prev_ft_id == tbl->ft_id) { ret = mlx5hws_table_update_connected_miss_tables(tbl); if (ret) { - mlx5hws_err(tbl->ctx, "Fatal error, failed to update connected miss table\n"); - goto matcher_reconnect; + mlx5hws_err(tbl->ctx, + "Fatal error, failed to update connected miss table\n"); + return ret; } } ret = mlx5hws_table_ft_set_default_next_ft(tbl, prev_ft_id); if (ret) { mlx5hws_err(tbl->ctx, "Fatal error, failed to restore matcher ft default miss\n"); - goto matcher_reconnect; + return ret; } return 0; - -matcher_reconnect: - if (list_empty(&tbl->matchers_list) || !prev) - list_add(&matcher->list_node, &tbl->matchers_list); - else - /* insert after prev matcher */ - list_add(&matcher->list_node, &prev->list_node); - - return ret; } static void hws_matcher_set_rtc_attr_sz(struct mlx5hws_matcher *matcher, -- 2.39.5 (Apple Git-154)

3 months

1
0
0 0

[PATCH] media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID

by Ricardo Ribalda

From: Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID. ``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ``` If we add a new entity with id 0 or a duplicated ID, it will be marked as UVC_INVALID_ENTITY_ID. In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID"), we ignored all the invalid units, this broke a lot of non-compatible cameras. Hopefully we are more lucky this time. This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings. In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid. Here is a sample stack trace for one of those cases. [ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] </TASK> Cc: stable(a)vger.kernel.org Reported-by: syzbot+0584f746fde3d52b4675(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675 Reported-by: syzbot+dd320d114deb3f5bb79b(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b Fixes: a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> Co-developed-by: Ricardo Ribalda <ribalda(a)chromium.org> Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org> --- This is a new attempt to land a Thadeu's patch, but being a bit more benevolent on the non-compliant cameras. I have kept most of Thadeu's code, but instead of returning an error when trying to allocate an invalid entity, I replace its id with a special ID. Thadeu can you validate this new version? Tomasz can you also check this patch with your non compliant camera? Thanks! --- drivers/media/usb/uvc/uvc_driver.c | 73 ++++++++++++++++++++++++-------------- drivers/media/usb/uvc/uvcvideo.h | 2 ++ 2 files changed, 48 insertions(+), 27 deletions(-) diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 775bede0d93d9b3e5391914aa395326d3de6a3b1..46923cd85f0b6790f01ae6b393571ca7660900f7 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -137,6 +137,9 @@ struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) { struct uvc_entity *entity; + if (id == UVC_INVALID_ENTITY_ID) + return NULL; + list_for_each_entry(entity, &dev->entities, list) { if (entity->id == id) return entity; @@ -795,14 +798,27 @@ static const u8 uvc_media_transport_input_guid[16] = UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT; static const u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING; -static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, - unsigned int num_pads, unsigned int extra_size) +static struct uvc_entity *uvc_alloc_new_entity(struct uvc_device *dev, u16 type, + u16 id, unsigned int num_pads, + unsigned int extra_size) { struct uvc_entity *entity; unsigned int num_inputs; unsigned int size; unsigned int i; + /* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero. */ + if (id == 0) { + dev_err(&dev->intf->dev, "Found Unit with invalid ID 0.\n"); + id = UVC_INVALID_ENTITY_ID; + } + + /* Per UVC 1.1+ spec 3.7.2, the ID is unique. */ + if (uvc_entity_by_id(dev, id)) { + dev_err(&dev->intf->dev, "Found multiple Units with ID %u\n", id); + id = UVC_INVALID_ENTITY_ID; + } + extra_size = roundup(extra_size, sizeof(*entity->pads)); if (num_pads) num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1; @@ -812,7 +828,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, + num_inputs; entity = kzalloc(size, GFP_KERNEL); if (entity == NULL) - return NULL; + return ERR_PTR(-ENOMEM); entity->id = id; entity->type = type; @@ -924,10 +940,10 @@ static int uvc_parse_vendor_control(struct uvc_device *dev, break; } - unit = uvc_alloc_entity(UVC_VC_EXTENSION_UNIT, buffer[3], - p + 1, 2*n); - if (unit == NULL) - return -ENOMEM; + unit = uvc_alloc_new_entity(dev, UVC_VC_EXTENSION_UNIT, + buffer[3], p + 1, 2 * n); + if (IS_ERR(unit)) + return PTR_ERR(unit); memcpy(unit->guid, &buffer[4], 16); unit->extension.bNumControls = buffer[20]; @@ -1036,10 +1052,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev, return -EINVAL; } - term = uvc_alloc_entity(type | UVC_TERM_INPUT, buffer[3], - 1, n + p); - if (term == NULL) - return -ENOMEM; + term = uvc_alloc_new_entity(dev, type | UVC_TERM_INPUT, + buffer[3], 1, n + p); + if (IS_ERR(term)) + return PTR_ERR(term); if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) { term->camera.bControlSize = n; @@ -1095,10 +1111,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev, return 0; } - term = uvc_alloc_entity(type | UVC_TERM_OUTPUT, buffer[3], - 1, 0); - if (term == NULL) - return -ENOMEM; + term = uvc_alloc_new_entity(dev, type | UVC_TERM_OUTPUT, + buffer[3], 1, 0); + if (IS_ERR(term)) + return PTR_ERR(term); memcpy(term->baSourceID, &buffer[7], 1); @@ -1117,9 +1133,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev, return -EINVAL; } - unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, 0); - if (unit == NULL) - return -ENOMEM; + unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3], + p + 1, 0); + if (IS_ERR(unit)) + return PTR_ERR(unit); memcpy(unit->baSourceID, &buffer[5], p); @@ -1139,9 +1156,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev, return -EINVAL; } - unit = uvc_alloc_entity(buffer[2], buffer[3], 2, n); - if (unit == NULL) - return -ENOMEM; + unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3], 2, n); + if (IS_ERR(unit)) + return PTR_ERR(unit); memcpy(unit->baSourceID, &buffer[4], 1); unit->processing.wMaxMultiplier = @@ -1168,9 +1185,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev, return -EINVAL; } - unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, n); - if (unit == NULL) - return -ENOMEM; + unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3], + p + 1, n); + if (IS_ERR(unit)) + return PTR_ERR(unit); memcpy(unit->guid, &buffer[4], 16); unit->extension.bNumControls = buffer[20]; @@ -1315,9 +1333,10 @@ static int uvc_gpio_parse(struct uvc_device *dev) return dev_err_probe(&dev->intf->dev, irq, "No IRQ for privacy GPIO\n"); - unit = uvc_alloc_entity(UVC_EXT_GPIO_UNIT, UVC_EXT_GPIO_UNIT_ID, 0, 1); - if (!unit) - return -ENOMEM; + unit = uvc_alloc_new_entity(dev, UVC_EXT_GPIO_UNIT, + UVC_EXT_GPIO_UNIT_ID, 0, 1); + if (IS_ERR(unit)) + return PTR_ERR(unit); unit->gpio.gpio_privacy = gpio_privacy; unit->gpio.irq = irq; diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 70dc80e2b213dff333665022b3410b175d072793..881bfa0caab22714c26a3260cc843bda8e2706a4 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -41,6 +41,8 @@ #define UVC_EXT_GPIO_UNIT 0x7ffe #define UVC_EXT_GPIO_UNIT_ID 0x100 +#define UVC_INVALID_ENTITY_ID 0xffff + /* ------------------------------------------------------------------------ * Driver specific constants. */ --- base-commit: a75b8d198c55e9eb5feb6f6e155496305caba2dc change-id: 20250820-uvc-thadeu2-25723a961bd8 Best regards, -- Ricardo Ribalda <ribalda(a)chromium.org>

3 months

4
5
0 0

[PATCH] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46

by Christian Marangi

In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK. This wasn't notice as there were no board that made use of the secondary PHY LED but looking at the internal Documentation the actual value should be LED1_MODE_MASK similar to the other GPIO entry. Fix the wrong value to apply the correct MUX configuration. Cc: stable(a)vger.kernel.org Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> --- drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c index 5d84a778683d..f7f8fd2f35fc 100644 --- a/drivers/pinctrl/mediatek/pinctrl-airoha.c +++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c @@ -1752,8 +1752,8 @@ static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1816,8 +1816,8 @@ static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1880,8 +1880,8 @@ static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1944,8 +1944,8 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, -- 2.51.0

3 months

2
1
0 0

[PATCH v4] bus: mhi: host: Fix potential kernel panic by calling dev_err

by Adam Xue

In mhi_init_irq_setup, the device pointer used for dev_err was not initialized. Use the pointer from mhi_cntrl instead. Signed-off-by: Adam Xue <zxue(a)semtech.com> --- drivers/bus/mhi/host/init.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 7f72aab38ce9..099be8dd1900 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -194,7 +194,6 @@ static void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl) static int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl) { struct mhi_event *mhi_event = mhi_cntrl->mhi_event; - struct device *dev = &mhi_cntrl->mhi_dev->dev; unsigned long irq_flags = IRQF_SHARED | IRQF_NO_SUSPEND; int i, ret; @@ -221,7 +220,7 @@ static int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl) continue; if (mhi_event->irq >= mhi_cntrl->nr_irqs) { - dev_err(dev, "irq %d not available for event ring\n", + dev_err(mhi_cntrl->cntrl_dev, "irq %d not available for event ring\n", mhi_event->irq); ret = -EINVAL; goto error_request; @@ -232,7 +231,7 @@ static int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl) irq_flags, "mhi", mhi_event); if (ret) { - dev_err(dev, "Error requesting irq:%d for ev:%d\n", + dev_err(mhi_cntrl->cntrl_dev, "Error requesting irq:%d for ev:%d\n", mhi_cntrl->irq[mhi_event->irq], i); goto error_request; } -- 2.43.0 To view our privacy policy, including the types of personal information we collect, process and share, and the rights and options you have in this respect, see www.semtech.com/legal.

3 months

3
2
0 0

[PATCH v4] PCI: j721e: Fix programming sequence of "strap" settings

by Siddharth Vadapalli

The Cadence PCIe Controller integrated in the TI K3 SoCs supports both Root-Complex and Endpoint modes of operation. The Glue Layer allows "strapping" the Mode of operation of the Controller, the Link Speed and the Link Width. This is enabled by programming the "PCIEn_CTRL" register (n corresponds to the PCIe instance) within the CTRL_MMR memory-mapped register space. The "reset-values" of the registers are also different depending on the mode of operation. Since the PCIe Controller latches onto the "reset-values" immediately after being powered on, if the Glue Layer configuration is not done while the PCIe Controller is off, it will result in the PCIe Controller latching onto the wrong "reset-values". In practice, this will show up as a wrong representation of the PCIe Controller's capability structures in the PCIe Configuration Space. Some such capabilities which are supported by the PCIe Controller in the Root-Complex mode but are incorrectly latched onto as being unsupported are: - Link Bandwidth Notification - Alternate Routing ID (ARI) Forwarding Support - Next capability offset within Advanced Error Reporting (AER) capability Fix this by powering off the PCIe Controller before programming the "strap" settings and powering it on after that. The runtime PM APIs namely pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and increment the usage counter respectively, causing GENPD to power off and power on the PCIe Controller. Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> --- Hello, This patch is based on commit 76eeb9b8de98 Linux 6.17-rc5 of Mainline Linux. v3 of this patch is at: https://lore.kernel.org/r/20250829091707.2990211-1-s-vadapalli@ti.com/ Changes since v3: - The commit message and the comment have been updated to state that the runtime PM APIs being added by the patch change the usage counter for the PCIe Controller causing GENPD to power it off and power it on. This patch has been tested on the J7200-EVM since the issue being fixed by the patch is seen on the J7200 SoC. Test Logs: https://gist.github.com/Siddharth-Vadapalli-at-TI/38b403f4bb974c51ebf3d0d2a… Regards, Siddharth. drivers/pci/controller/cadence/pci-j721e.c | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 6c93f39d0288..29ffaf2bae10 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -284,6 +284,25 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) if (!ret) offset = args.args[0]; + /* + * The PCIe Controller's registers have different "reset-values" + * depending on the "strap" settings programmed into the PCIEn_CTRL + * register within the CTRL_MMR memory-mapped register space. + * The registers latch onto a "reset-value" based on the "strap" + * settings sampled after the PCIe Controller is powered on. + * To ensure that the "reset-values" are sampled accurately, power + * off the PCIe Controller before programming the "strap" settings + * and power it on after that. The runtime PM APIs namely + * pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and + * increment the usage counter respectively, causing GENPD to power off + * and power on the PCIe Controller. + */ + ret = pm_runtime_put_sync(dev); + if (ret < 0) { + dev_err(dev, "Failed to power off PCIe Controller\n"); + return ret; + } + ret = j721e_pcie_set_mode(pcie, syscon, offset); if (ret < 0) { dev_err(dev, "Failed to set pci mode\n"); @@ -302,6 +321,12 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) return ret; } + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "Failed to power on PCIe Controller\n"); + return ret; + } + /* Enable ACSPCIE refclk output if the optional property exists */ syscon = syscon_regmap_lookup_by_phandle_optional(node, "ti,syscon-acspcie-proxy-ctrl"); -- 2.43.0

3 months

2
1
0 0

[PATCH] fs/ceph/addr: fix crash after fscrypt_encrypt_pagecache_blocks() error

by Max Kellermann

The function move_dirty_folio_in_page_array() was created by commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by moving code from ceph_writepages_start() to this function. This new function is supposed to return an error code which is checked by the caller (now ceph_process_folio_batch()), and on error, the caller invokes redirty_page_for_writepage() and then breaks from the loop. However, the refactoring commit has gone wrong, and it by accident, it always returns 0 (= success) because it first NULLs the pointer and then returns PTR_ERR(NULL) which is always 0. This means errors are silently ignored, leaving NULL entries in the page array, which may later crash the kernel. The simple solution is to call PTR_ERR() before clearing the pointer. Fixes: ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") Link: https://lore.kernel.org/ceph-devel/aK4v548CId5GIKG1@swift.blarg.de/ Cc: stable(a)vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann(a)ionos.com> --- fs/ceph/addr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 8b202d789e93..e3e0d477f3f7 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -1264,7 +1264,9 @@ static inline int move_dirty_folio_in_page_array(struct address_space *mapping, 0, gfp_flags); if (IS_ERR(pages[index])) { - if (PTR_ERR(pages[index]) == -EINVAL) { + int err = PTR_ERR(pages[index]); + + if (err == -EINVAL) { pr_err_client(cl, "inode->i_blkbits=%hhu\n", inode->i_blkbits); } @@ -1273,7 +1275,7 @@ static inline int move_dirty_folio_in_page_array(struct address_space *mapping, BUG_ON(ceph_wbc->locked_pages == 0); pages[index] = NULL; - return PTR_ERR(pages[index]); + return err; } } else { pages[index] = &folio->page; -- 2.47.2

3 months

2
1
0 0

FAILED: patch "[PATCH] kunit: kasan_test: disable fortify string checker on" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 7a19afee6fb39df63ddea7ce78976d8c521178c6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025090617-define-clerical-52ff@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7a19afee6fb39df63ddea7ce78976d8c521178c6 Mon Sep 17 00:00:00 2001 From: Yeoreum Yun <yeoreum.yun(a)arm.com> Date: Fri, 1 Aug 2025 13:02:36 +0100 Subject: [PATCH] kunit: kasan_test: disable fortify string checker on kasan_strings() test Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with FORTIFY_SOURCE") the kernel is panicing in kasan_string(). This is due to the `src` and `ptr` not being hidden from the optimizer which would disable the runtime fortify string checker. Call trace: __fortify_panic+0x10/0x20 (P) kasan_strings+0x980/0x9b0 kunit_try_run_case+0x68/0x190 kunit_generic_run_threadfn_adapter+0x34/0x68 kthread+0x1c4/0x228 ret_from_fork+0x10/0x20 Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000) ---[ end trace 0000000000000000 ]--- note: kunit_try_catch[128] exited with irqs disabled note: kunit_try_catch[128] exited with preempt_count 1 # kasan_strings: try faulted: last ** replaying previous printk message ** # kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600 # kasan_strings: internal error occurred preventing test case from running: -4 Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit") Signed-off-by: Yeoreum Yun <yeoreum.yun(a)arm.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Dmitriy Vyukov <dvyukov(a)google.com> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/kasan/kasan_test_c.c b/mm/kasan/kasan_test_c.c index e0968acc03aa..f4b17984b627 100644 --- a/mm/kasan/kasan_test_c.c +++ b/mm/kasan/kasan_test_c.c @@ -1578,9 +1578,11 @@ static void kasan_strings(struct kunit *test) ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr); + OPTIMIZER_HIDE_VAR(ptr); src = kmalloc(KASAN_GRANULE_SIZE, GFP_KERNEL | __GFP_ZERO); strscpy(src, "f0cacc1a0000000", KASAN_GRANULE_SIZE); + OPTIMIZER_HIDE_VAR(src); /* * Make sure that strscpy() does not trigger KASAN if it overreads into

3 months

2
1
0 0

FAILED: patch "[PATCH] kunit: kasan_test: disable fortify string checker on" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 7a19afee6fb39df63ddea7ce78976d8c521178c6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025090616-departed-guidance-d285@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7a19afee6fb39df63ddea7ce78976d8c521178c6 Mon Sep 17 00:00:00 2001 From: Yeoreum Yun <yeoreum.yun(a)arm.com> Date: Fri, 1 Aug 2025 13:02:36 +0100 Subject: [PATCH] kunit: kasan_test: disable fortify string checker on kasan_strings() test Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with FORTIFY_SOURCE") the kernel is panicing in kasan_string(). This is due to the `src` and `ptr` not being hidden from the optimizer which would disable the runtime fortify string checker. Call trace: __fortify_panic+0x10/0x20 (P) kasan_strings+0x980/0x9b0 kunit_try_run_case+0x68/0x190 kunit_generic_run_threadfn_adapter+0x34/0x68 kthread+0x1c4/0x228 ret_from_fork+0x10/0x20 Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000) ---[ end trace 0000000000000000 ]--- note: kunit_try_catch[128] exited with irqs disabled note: kunit_try_catch[128] exited with preempt_count 1 # kasan_strings: try faulted: last ** replaying previous printk message ** # kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600 # kasan_strings: internal error occurred preventing test case from running: -4 Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit") Signed-off-by: Yeoreum Yun <yeoreum.yun(a)arm.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Dmitriy Vyukov <dvyukov(a)google.com> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/kasan/kasan_test_c.c b/mm/kasan/kasan_test_c.c index e0968acc03aa..f4b17984b627 100644 --- a/mm/kasan/kasan_test_c.c +++ b/mm/kasan/kasan_test_c.c @@ -1578,9 +1578,11 @@ static void kasan_strings(struct kunit *test) ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr); + OPTIMIZER_HIDE_VAR(ptr); src = kmalloc(KASAN_GRANULE_SIZE, GFP_KERNEL | __GFP_ZERO); strscpy(src, "f0cacc1a0000000", KASAN_GRANULE_SIZE); + OPTIMIZER_HIDE_VAR(src); /* * Make sure that strscpy() does not trigger KASAN if it overreads into

3 months

2
1
0 0

[PATCH] firmware: arm_scmi: quirk: fix write to string constant

by Johan Hovold

The quirk version range is typically a string constant and must not be modified (e.g. as it may be stored in read-only memory): Unable to handle kernel write to read-only memory at virtual address ffffc036d998a947 Fix the range parsing so that it operates on a copy of the version range string, and mark all the quirk strings as const to reduce the risk of introducing similar future issues. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220437 Fixes: 487c407d57d6 ("firmware: arm_scmi: Add common framework to handle firmware quirks") Cc: stable(a)vger.kernel.org # 6.16 Cc: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/firmware/arm_scmi/quirks.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/arm_scmi/quirks.c b/drivers/firmware/arm_scmi/quirks.c index 03960aca3610..e70823754b0b 100644 --- a/drivers/firmware/arm_scmi/quirks.c +++ b/drivers/firmware/arm_scmi/quirks.c @@ -89,9 +89,9 @@ struct scmi_quirk { bool enabled; const char *name; - char *vendor; - char *sub_vendor_id; - char *impl_ver_range; + const char *vendor; + const char *sub_vendor_id; + const char *impl_ver_range; u32 start_range; u32 end_range; struct static_key_false *key; @@ -217,7 +217,7 @@ static unsigned int scmi_quirk_signature(const char *vend, const char *sub_vend) static int scmi_quirk_range_parse(struct scmi_quirk *quirk) { - const char *last, *first = quirk->impl_ver_range; + const char *last, *first; size_t len; char *sep; int ret; @@ -228,8 +228,12 @@ static int scmi_quirk_range_parse(struct scmi_quirk *quirk) if (!len) return 0; + first = kmemdup(quirk->impl_ver_range, len + 1, GFP_KERNEL); + if (!first) + return -ENOMEM; + last = first + len - 1; - sep = strchr(quirk->impl_ver_range, '-'); + sep = strchr(first, '-'); if (sep) *sep = '\0'; @@ -238,7 +242,7 @@ static int scmi_quirk_range_parse(struct scmi_quirk *quirk) else /* X OR X- OR X-y */ ret = kstrtouint(first, 0, &quirk->start_range); if (ret) - return ret; + goto out_free; if (!sep) quirk->end_range = quirk->start_range; @@ -246,7 +250,9 @@ static int scmi_quirk_range_parse(struct scmi_quirk *quirk) ret = kstrtouint(sep + 1, 0, &quirk->end_range); if (quirk->start_range > quirk->end_range) - return -EINVAL; + ret = -EINVAL; +out_free: + kfree(first); return ret; } -- 2.49.1

3 months

3
7
0 0

FAILED: patch "[PATCH] kunit: kasan_test: disable fortify string checker on" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 7a19afee6fb39df63ddea7ce78976d8c521178c6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025090614-jaws-chihuahua-c86c@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7a19afee6fb39df63ddea7ce78976d8c521178c6 Mon Sep 17 00:00:00 2001 From: Yeoreum Yun <yeoreum.yun(a)arm.com> Date: Fri, 1 Aug 2025 13:02:36 +0100 Subject: [PATCH] kunit: kasan_test: disable fortify string checker on kasan_strings() test Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with FORTIFY_SOURCE") the kernel is panicing in kasan_string(). This is due to the `src` and `ptr` not being hidden from the optimizer which would disable the runtime fortify string checker. Call trace: __fortify_panic+0x10/0x20 (P) kasan_strings+0x980/0x9b0 kunit_try_run_case+0x68/0x190 kunit_generic_run_threadfn_adapter+0x34/0x68 kthread+0x1c4/0x228 ret_from_fork+0x10/0x20 Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000) ---[ end trace 0000000000000000 ]--- note: kunit_try_catch[128] exited with irqs disabled note: kunit_try_catch[128] exited with preempt_count 1 # kasan_strings: try faulted: last ** replaying previous printk message ** # kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600 # kasan_strings: internal error occurred preventing test case from running: -4 Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit") Signed-off-by: Yeoreum Yun <yeoreum.yun(a)arm.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Dmitriy Vyukov <dvyukov(a)google.com> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/kasan/kasan_test_c.c b/mm/kasan/kasan_test_c.c index e0968acc03aa..f4b17984b627 100644 --- a/mm/kasan/kasan_test_c.c +++ b/mm/kasan/kasan_test_c.c @@ -1578,9 +1578,11 @@ static void kasan_strings(struct kunit *test) ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr); + OPTIMIZER_HIDE_VAR(ptr); src = kmalloc(KASAN_GRANULE_SIZE, GFP_KERNEL | __GFP_ZERO); strscpy(src, "f0cacc1a0000000", KASAN_GRANULE_SIZE); + OPTIMIZER_HIDE_VAR(src); /* * Make sure that strscpy() does not trigger KASAN if it overreads into

3 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror