- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] phy: freescale: imx8m-pcie: assert phy reset and perst in" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x aecb63e88c5e5fb9afb782a1577264c76f179af9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041739-buffoon-panorama-8f27@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aecb63e88c5e5fb9afb782a1577264c76f179af9 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger <stefan.eichenberger(a)toradex.com> Date: Wed, 5 Mar 2025 15:43:16 +0100 Subject: [PATCH] phy: freescale: imx8m-pcie: assert phy reset and perst in power off Ensure the PHY reset and perst is asserted during power-off to guarantee it is in a reset state upon repeated power-on calls. This resolves an issue where the PHY may not properly initialize during subsequent power-on cycles. Power-on will deassert the reset at the appropriate time after tuning the PHY parameters. During suspend/resume cycles, we observed that the PHY PLL failed to lock during resume when the CPU temperature increased from 65C to 75C. The observed errors were: phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110 imx6q-pcie 33800000.pcie: waiting for PHY ready timeout! imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110 imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110 This resulted in a complete CPU freeze, which is resolved by ensuring the PHY is in reset during power-on, thus preventing PHY PLL failures. Cc: stable(a)vger.kernel.org Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Stefan Eichenberger <stefan.eichenberger(a)toradex.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c index 5b505e34ca36..7355d9921b64 100644 --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c @@ -156,6 +156,16 @@ static int imx8_pcie_phy_power_on(struct phy *phy) return ret; } +static int imx8_pcie_phy_power_off(struct phy *phy) +{ + struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy); + + reset_control_assert(imx8_phy->reset); + reset_control_assert(imx8_phy->perst); + + return 0; +} + static int imx8_pcie_phy_init(struct phy *phy) { struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy); @@ -176,6 +186,7 @@ static const struct phy_ops imx8_pcie_phy_ops = { .init = imx8_pcie_phy_init, .exit = imx8_pcie_phy_exit, .power_on = imx8_pcie_phy_power_on, + .power_off = imx8_pcie_phy_power_off, .owner = THIS_MODULE, };

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for" failed to apply to 6.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.13.y git checkout FETCH_HEAD git cherry-pick -x fa17ff8e325a657c84be1083f06e54ee7eea82e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041709-smuggling-subway-557b@gregkh' --subject-prefix 'PATCH 6.13.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fa17ff8e325a657c84be1083f06e54ee7eea82e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= <nfraprado(a)collabora.com> Date: Mon, 13 Jan 2025 10:27:14 -0300 Subject: [PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to get working interrupts, a low offset value needs to be configured. The minimum value for it is 20 Celsius, which is what is configured when there's no lower thermal trip (ie the thermal core passes -INT_MAX as low trip temperature). However, when the temperature gets that low and fluctuates around that value it causes an interrupt storm. Prevent that interrupt storm by not enabling the low offset interrupt if the low threshold is the minimum one. Cc: stable(a)vger.kernel.org Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07… Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 0aaa44b734ca..04bfbfe93a71 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -67,10 +67,14 @@ #define LVTS_CALSCALE_CONF 0x300 #define LVTS_MONINT_CONF 0x0300318C -#define LVTS_MONINT_OFFSET_SENSOR0 0xC -#define LVTS_MONINT_OFFSET_SENSOR1 0x180 -#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 -#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0 BIT(3) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1 BIT(8) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2 BIT(13) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3 BIT(25) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0 BIT(2) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1 BIT(7) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2 BIT(12) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3 BIT(24) #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0 @@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) { - static const u32 masks[] = { - LVTS_MONINT_OFFSET_SENSOR0, - LVTS_MONINT_OFFSET_SENSOR1, - LVTS_MONINT_OFFSET_SENSOR2, - LVTS_MONINT_OFFSET_SENSOR3, + static const u32 high_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3, + }; + static const u32 low_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3, }; u32 value = 0; int i; @@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) for (i = 0; i < ARRAY_SIZE(masks); i++) { if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh - && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) - value |= masks[i]; - else - value &= ~masks[i]; + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) { + /* + * The minimum threshold needs to be configured in the + * OFFSETL register to get working interrupts, but we + * don't actually want to generate interrupts when + * crossing it. + */ + if (lvts_ctrl->low_thresh == -INT_MAX) { + value &= ~low_offset_inten_masks[i]; + value |= high_offset_inten_masks[i]; + } else { + value |= low_offset_inten_masks[i] | high_offset_inten_masks[i]; + } + } else { + value &= ~(low_offset_inten_masks[i] | high_offset_inten_masks[i]); + } } writel(value, LVTS_MONINT(lvts_ctrl->base));

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x fa17ff8e325a657c84be1083f06e54ee7eea82e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041708-pasta-coroner-1111@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fa17ff8e325a657c84be1083f06e54ee7eea82e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= <nfraprado(a)collabora.com> Date: Mon, 13 Jan 2025 10:27:14 -0300 Subject: [PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to get working interrupts, a low offset value needs to be configured. The minimum value for it is 20 Celsius, which is what is configured when there's no lower thermal trip (ie the thermal core passes -INT_MAX as low trip temperature). However, when the temperature gets that low and fluctuates around that value it causes an interrupt storm. Prevent that interrupt storm by not enabling the low offset interrupt if the low threshold is the minimum one. Cc: stable(a)vger.kernel.org Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07… Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 0aaa44b734ca..04bfbfe93a71 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -67,10 +67,14 @@ #define LVTS_CALSCALE_CONF 0x300 #define LVTS_MONINT_CONF 0x0300318C -#define LVTS_MONINT_OFFSET_SENSOR0 0xC -#define LVTS_MONINT_OFFSET_SENSOR1 0x180 -#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 -#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0 BIT(3) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1 BIT(8) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2 BIT(13) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3 BIT(25) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0 BIT(2) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1 BIT(7) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2 BIT(12) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3 BIT(24) #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0 @@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) { - static const u32 masks[] = { - LVTS_MONINT_OFFSET_SENSOR0, - LVTS_MONINT_OFFSET_SENSOR1, - LVTS_MONINT_OFFSET_SENSOR2, - LVTS_MONINT_OFFSET_SENSOR3, + static const u32 high_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3, + }; + static const u32 low_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3, }; u32 value = 0; int i; @@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) for (i = 0; i < ARRAY_SIZE(masks); i++) { if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh - && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) - value |= masks[i]; - else - value &= ~masks[i]; + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) { + /* + * The minimum threshold needs to be configured in the + * OFFSETL register to get working interrupts, but we + * don't actually want to generate interrupts when + * crossing it. + */ + if (lvts_ctrl->low_thresh == -INT_MAX) { + value &= ~low_offset_inten_masks[i]; + value |= high_offset_inten_masks[i]; + } else { + value |= low_offset_inten_masks[i] | high_offset_inten_masks[i]; + } + } else { + value &= ~(low_offset_inten_masks[i] | high_offset_inten_masks[i]); + } } writel(value, LVTS_MONINT(lvts_ctrl->base));

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x fa17ff8e325a657c84be1083f06e54ee7eea82e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041731-qualifier-football-8dbd@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fa17ff8e325a657c84be1083f06e54ee7eea82e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= <nfraprado(a)collabora.com> Date: Mon, 13 Jan 2025 10:27:14 -0300 Subject: [PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to get working interrupts, a low offset value needs to be configured. The minimum value for it is 20 Celsius, which is what is configured when there's no lower thermal trip (ie the thermal core passes -INT_MAX as low trip temperature). However, when the temperature gets that low and fluctuates around that value it causes an interrupt storm. Prevent that interrupt storm by not enabling the low offset interrupt if the low threshold is the minimum one. Cc: stable(a)vger.kernel.org Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07… Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 0aaa44b734ca..04bfbfe93a71 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -67,10 +67,14 @@ #define LVTS_CALSCALE_CONF 0x300 #define LVTS_MONINT_CONF 0x0300318C -#define LVTS_MONINT_OFFSET_SENSOR0 0xC -#define LVTS_MONINT_OFFSET_SENSOR1 0x180 -#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 -#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0 BIT(3) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1 BIT(8) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2 BIT(13) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3 BIT(25) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0 BIT(2) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1 BIT(7) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2 BIT(12) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3 BIT(24) #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0 @@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) { - static const u32 masks[] = { - LVTS_MONINT_OFFSET_SENSOR0, - LVTS_MONINT_OFFSET_SENSOR1, - LVTS_MONINT_OFFSET_SENSOR2, - LVTS_MONINT_OFFSET_SENSOR3, + static const u32 high_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3, + }; + static const u32 low_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3, }; u32 value = 0; int i; @@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) for (i = 0; i < ARRAY_SIZE(masks); i++) { if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh - && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) - value |= masks[i]; - else - value &= ~masks[i]; + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) { + /* + * The minimum threshold needs to be configured in the + * OFFSETL register to get working interrupts, but we + * don't actually want to generate interrupts when + * crossing it. + */ + if (lvts_ctrl->low_thresh == -INT_MAX) { + value &= ~low_offset_inten_masks[i]; + value |= high_offset_inten_masks[i]; + } else { + value |= low_offset_inten_masks[i] | high_offset_inten_masks[i]; + } + } else { + value &= ~(low_offset_inten_masks[i] | high_offset_inten_masks[i]); + } } writel(value, LVTS_MONINT(lvts_ctrl->base));

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x fa17ff8e325a657c84be1083f06e54ee7eea82e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041731-pellet-morale-d20d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fa17ff8e325a657c84be1083f06e54ee7eea82e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= <nfraprado(a)collabora.com> Date: Mon, 13 Jan 2025 10:27:14 -0300 Subject: [PATCH] thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to get working interrupts, a low offset value needs to be configured. The minimum value for it is 20 Celsius, which is what is configured when there's no lower thermal trip (ie the thermal core passes -INT_MAX as low trip temperature). However, when the temperature gets that low and fluctuates around that value it causes an interrupt storm. Prevent that interrupt storm by not enabling the low offset interrupt if the low threshold is the minimum one. Cc: stable(a)vger.kernel.org Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07… Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 0aaa44b734ca..04bfbfe93a71 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -67,10 +67,14 @@ #define LVTS_CALSCALE_CONF 0x300 #define LVTS_MONINT_CONF 0x0300318C -#define LVTS_MONINT_OFFSET_SENSOR0 0xC -#define LVTS_MONINT_OFFSET_SENSOR1 0x180 -#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 -#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0 BIT(3) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1 BIT(8) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2 BIT(13) +#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3 BIT(25) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0 BIT(2) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1 BIT(7) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2 BIT(12) +#define LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3 BIT(24) #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0 @@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) { - static const u32 masks[] = { - LVTS_MONINT_OFFSET_SENSOR0, - LVTS_MONINT_OFFSET_SENSOR1, - LVTS_MONINT_OFFSET_SENSOR2, - LVTS_MONINT_OFFSET_SENSOR3, + static const u32 high_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR3, + }; + static const u32 low_offset_inten_masks[] = { + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR0, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR1, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR2, + LVTS_MONINT_OFFSET_LOW_INTEN_SENSOR3, }; u32 value = 0; int i; @@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) for (i = 0; i < ARRAY_SIZE(masks); i++) { if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh - && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) - value |= masks[i]; - else - value &= ~masks[i]; + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) { + /* + * The minimum threshold needs to be configured in the + * OFFSETL register to get working interrupts, but we + * don't actually want to generate interrupts when + * crossing it. + */ + if (lvts_ctrl->low_thresh == -INT_MAX) { + value &= ~low_offset_inten_masks[i]; + value |= high_offset_inten_masks[i]; + } else { + value |= low_offset_inten_masks[i] | high_offset_inten_masks[i]; + } + } else { + value &= ~(low_offset_inten_masks[i] | high_offset_inten_masks[i]); + } } writel(value, LVTS_MONINT(lvts_ctrl->base));

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] thermal/drivers/mediatek/lvts: Disable Stage 3 thermal" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x c612cbcdf603aefb3358b2e3964dcd5aa3f827a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041721-net-slider-2204@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c612cbcdf603aefb3358b2e3964dcd5aa3f827a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= <nfraprado(a)collabora.com> Date: Mon, 13 Jan 2025 10:27:13 -0300 Subject: [PATCH] thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Stage 3 thermal threshold is currently configured during the controller initialization to 105 Celsius. From the kernel perspective, this configuration is harmful because: * The stage 3 interrupt that gets triggered when the threshold is crossed is not handled in any way by the IRQ handler, it just gets cleared. Besides, the temperature used for stage 3 comes from the sensors, and the critical thermal trip points described in the Devicetree will already cause a shutdown when crossed (at a lower temperature, of 100 Celsius, for all SoCs currently using this driver). * The only effect of crossing the stage 3 threshold that has been observed is that it causes the machine to no longer be able to enter suspend. Even if that was a result of a momentary glitch in the temperature reading of a sensor (as has been observed on the MT8192-based Chromebooks). For those reasons, disable the Stage 3 thermal threshold configuration. Cc: stable(a)vger.kernel.org Reported-by: Hsin-Te Yuan <yuanhsinte(a)chromium.org> Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/ Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07… Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index a1a438ebad33..0aaa44b734ca 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -65,7 +65,7 @@ #define LVTS_HW_FILTER 0x0 #define LVTS_TSSEL_CONF 0x13121110 #define LVTS_CALSCALE_CONF 0x300 -#define LVTS_MONINT_CONF 0x8300318C +#define LVTS_MONINT_CONF 0x0300318C #define LVTS_MONINT_OFFSET_SENSOR0 0xC #define LVTS_MONINT_OFFSET_SENSOR1 0x180 @@ -91,8 +91,6 @@ #define LVTS_MSR_READ_TIMEOUT_US 400 #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) -#define LVTS_HW_TSHUT_TEMP 105000 - #define LVTS_MINIMUM_THRESHOLD 20000 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; @@ -145,7 +143,6 @@ struct lvts_ctrl { struct lvts_sensor sensors[LVTS_SENSOR_MAX]; const struct lvts_data *lvts_data; u32 calibration[LVTS_SENSOR_MAX]; - u32 hw_tshut_raw_temp; u8 valid_sensor_mask; int mode; void __iomem *base; @@ -837,14 +834,6 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, */ lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode; - /* - * The temperature to raw temperature must be done - * after initializing the calibration. - */ - lvts_ctrl[i].hw_tshut_raw_temp = - lvts_temp_to_raw(LVTS_HW_TSHUT_TEMP, - lvts_data->temp_factor); - lvts_ctrl[i].low_thresh = INT_MIN; lvts_ctrl[i].high_thresh = INT_MIN; } @@ -919,7 +908,6 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * 10 : Selected sensor with bits 19-18 * 11 : Reserved */ - writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base)); /* * LVTS_PROTTA : Stage 1 temperature threshold @@ -932,8 +920,8 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * * writel(0x0, LVTS_PROTTA(lvts_ctrl->base)); * writel(0x0, LVTS_PROTTB(lvts_ctrl->base)); + * writel(0x0, LVTS_PROTTC(lvts_ctrl->base)); */ - writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base)); /* * LVTS_MONINT : Interrupt configuration register

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] spi: fsl-qspi: use devm function instead of driver remove" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 40369bfe717e96e26650eeecfa5a6363563df6e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041726-excess-confident-6c33@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40369bfe717e96e26650eeecfa5a6363563df6e4 Mon Sep 17 00:00:00 2001 From: Han Xu <han.xu(a)nxp.com> Date: Wed, 26 Mar 2025 17:41:51 -0500 Subject: [PATCH] spi: fsl-qspi: use devm function instead of driver remove Driver use devm APIs to manage clk/irq/resources and register the spi controller, but the legacy remove function will be called first during device detach and trigger kernel panic. Drop the remove function and use devm_add_action_or_reset() for driver cleanup to ensure the release sequence. Trigger kernel panic on i.MX8MQ by echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind Cc: stable(a)vger.kernel.org Fixes: 8fcb830a00f0 ("spi: spi-fsl-qspi: use devm_spi_register_controller") Reported-by: Kevin Hao <haokexin(a)gmail.com> Signed-off-by: Han Xu <han.xu(a)nxp.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 355e6a39fb41..5c59fddb32c1 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -844,6 +844,19 @@ static const struct spi_controller_mem_caps fsl_qspi_mem_caps = { .per_op_freq = true, }; +static void fsl_qspi_cleanup(void *data) +{ + struct fsl_qspi *q = data; + + /* disable the hardware */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + fsl_qspi_clk_disable_unprep(q); + + mutex_destroy(&q->lock); +} + static int fsl_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctlr; @@ -934,6 +947,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->dev.of_node = np; + ret = devm_add_action_or_reset(dev, fsl_qspi_cleanup, q); + if (ret) + goto err_destroy_mutex; + ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_destroy_mutex; @@ -953,19 +970,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) return ret; } -static void fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - fsl_qspi_clk_disable_unprep(q); - - mutex_destroy(&q->lock); -} - static int fsl_qspi_suspend(struct device *dev) { return 0; @@ -1003,7 +1007,6 @@ static struct platform_driver fsl_qspi_driver = { .pm = &fsl_qspi_pm_ops, }, .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, }; module_platform_driver(fsl_qspi_driver);

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] spi: fsl-qspi: use devm function instead of driver remove" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 40369bfe717e96e26650eeecfa5a6363563df6e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041725-clustered-unruly-09ab@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40369bfe717e96e26650eeecfa5a6363563df6e4 Mon Sep 17 00:00:00 2001 From: Han Xu <han.xu(a)nxp.com> Date: Wed, 26 Mar 2025 17:41:51 -0500 Subject: [PATCH] spi: fsl-qspi: use devm function instead of driver remove Driver use devm APIs to manage clk/irq/resources and register the spi controller, but the legacy remove function will be called first during device detach and trigger kernel panic. Drop the remove function and use devm_add_action_or_reset() for driver cleanup to ensure the release sequence. Trigger kernel panic on i.MX8MQ by echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind Cc: stable(a)vger.kernel.org Fixes: 8fcb830a00f0 ("spi: spi-fsl-qspi: use devm_spi_register_controller") Reported-by: Kevin Hao <haokexin(a)gmail.com> Signed-off-by: Han Xu <han.xu(a)nxp.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 355e6a39fb41..5c59fddb32c1 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -844,6 +844,19 @@ static const struct spi_controller_mem_caps fsl_qspi_mem_caps = { .per_op_freq = true, }; +static void fsl_qspi_cleanup(void *data) +{ + struct fsl_qspi *q = data; + + /* disable the hardware */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + fsl_qspi_clk_disable_unprep(q); + + mutex_destroy(&q->lock); +} + static int fsl_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctlr; @@ -934,6 +947,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->dev.of_node = np; + ret = devm_add_action_or_reset(dev, fsl_qspi_cleanup, q); + if (ret) + goto err_destroy_mutex; + ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_destroy_mutex; @@ -953,19 +970,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) return ret; } -static void fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - fsl_qspi_clk_disable_unprep(q); - - mutex_destroy(&q->lock); -} - static int fsl_qspi_suspend(struct device *dev) { return 0; @@ -1003,7 +1007,6 @@ static struct platform_driver fsl_qspi_driver = { .pm = &fsl_qspi_pm_ops, }, .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, }; module_platform_driver(fsl_qspi_driver);

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] spi: fsl-qspi: use devm function instead of driver remove" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 40369bfe717e96e26650eeecfa5a6363563df6e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041725-unpack-salt-80eb@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40369bfe717e96e26650eeecfa5a6363563df6e4 Mon Sep 17 00:00:00 2001 From: Han Xu <han.xu(a)nxp.com> Date: Wed, 26 Mar 2025 17:41:51 -0500 Subject: [PATCH] spi: fsl-qspi: use devm function instead of driver remove Driver use devm APIs to manage clk/irq/resources and register the spi controller, but the legacy remove function will be called first during device detach and trigger kernel panic. Drop the remove function and use devm_add_action_or_reset() for driver cleanup to ensure the release sequence. Trigger kernel panic on i.MX8MQ by echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind Cc: stable(a)vger.kernel.org Fixes: 8fcb830a00f0 ("spi: spi-fsl-qspi: use devm_spi_register_controller") Reported-by: Kevin Hao <haokexin(a)gmail.com> Signed-off-by: Han Xu <han.xu(a)nxp.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 355e6a39fb41..5c59fddb32c1 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -844,6 +844,19 @@ static const struct spi_controller_mem_caps fsl_qspi_mem_caps = { .per_op_freq = true, }; +static void fsl_qspi_cleanup(void *data) +{ + struct fsl_qspi *q = data; + + /* disable the hardware */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + fsl_qspi_clk_disable_unprep(q); + + mutex_destroy(&q->lock); +} + static int fsl_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctlr; @@ -934,6 +947,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->dev.of_node = np; + ret = devm_add_action_or_reset(dev, fsl_qspi_cleanup, q); + if (ret) + goto err_destroy_mutex; + ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_destroy_mutex; @@ -953,19 +970,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) return ret; } -static void fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - fsl_qspi_clk_disable_unprep(q); - - mutex_destroy(&q->lock); -} - static int fsl_qspi_suspend(struct device *dev) { return 0; @@ -1003,7 +1007,6 @@ static struct platform_driver fsl_qspi_driver = { .pm = &fsl_qspi_pm_ops, }, .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, }; module_platform_driver(fsl_qspi_driver);

2 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] spi: fsl-qspi: use devm function instead of driver remove" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 40369bfe717e96e26650eeecfa5a6363563df6e4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025041724-scam-animation-c621@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40369bfe717e96e26650eeecfa5a6363563df6e4 Mon Sep 17 00:00:00 2001 From: Han Xu <han.xu(a)nxp.com> Date: Wed, 26 Mar 2025 17:41:51 -0500 Subject: [PATCH] spi: fsl-qspi: use devm function instead of driver remove Driver use devm APIs to manage clk/irq/resources and register the spi controller, but the legacy remove function will be called first during device detach and trigger kernel panic. Drop the remove function and use devm_add_action_or_reset() for driver cleanup to ensure the release sequence. Trigger kernel panic on i.MX8MQ by echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind Cc: stable(a)vger.kernel.org Fixes: 8fcb830a00f0 ("spi: spi-fsl-qspi: use devm_spi_register_controller") Reported-by: Kevin Hao <haokexin(a)gmail.com> Signed-off-by: Han Xu <han.xu(a)nxp.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 355e6a39fb41..5c59fddb32c1 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -844,6 +844,19 @@ static const struct spi_controller_mem_caps fsl_qspi_mem_caps = { .per_op_freq = true, }; +static void fsl_qspi_cleanup(void *data) +{ + struct fsl_qspi *q = data; + + /* disable the hardware */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + fsl_qspi_clk_disable_unprep(q); + + mutex_destroy(&q->lock); +} + static int fsl_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctlr; @@ -934,6 +947,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->dev.of_node = np; + ret = devm_add_action_or_reset(dev, fsl_qspi_cleanup, q); + if (ret) + goto err_destroy_mutex; + ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_destroy_mutex; @@ -953,19 +970,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) return ret; } -static void fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - fsl_qspi_clk_disable_unprep(q); - - mutex_destroy(&q->lock); -} - static int fsl_qspi_suspend(struct device *dev) { return 0; @@ -1003,7 +1007,6 @@ static struct platform_driver fsl_qspi_driver = { .pm = &fsl_qspi_pm_ops, }, .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, }; module_platform_driver(fsl_qspi_driver);

2 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror