Assert PCI Configuration Enable bit after probe. When this bit is left to
0 in the endpoint mode, the RK3399 PCIe endpoint core will generate
configuration request retry status (CRS) messages back to the root complex.
Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply
to configuration requests from the root complex.
This is documented in section 17.5.8.1.2 of the RK3399 TRM.
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Cc: stable(a)vger.kernel.org
Signed-off-by: Rick Wertenbroek <rick.wertenbroek(a)gmail.com>
Reviewed-by: Damien Le Moal <damien.lemoal(a)opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal(a)opensource.wdc.com>
---
drivers/pci/controller/pcie-rockchip-ep.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 9b835377bd9e..4c84e403e155 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -623,6 +623,8 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
ep->irq_pci_addr = ROCKCHIP_PCIE_EP_DUMMY_IRQ_ADDR;
+ rockchip_pcie_write(rockchip, PCIE_CLIENT_CONF_ENABLE, PCIE_CLIENT_CONFIG);
+
return 0;
err_epc_mem_exit:
pci_epc_mem_exit(epc);
--
2.25.1
Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.
This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).
But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.
It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.
So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.
Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.
Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable(a)vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
---
drivers/platform/x86/ideapad-laptop.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index b5ef3452da1f..35c63cce0479 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1170,7 +1170,6 @@ static const struct key_entry ideapad_keymap[] = {
{ KE_KEY, 65, { KEY_PROG4 } },
{ KE_KEY, 66, { KEY_TOUCHPAD_OFF } },
{ KE_KEY, 67, { KEY_TOUCHPAD_ON } },
- { KE_KEY, 68, { KEY_TOUCHPAD_TOGGLE } },
{ KE_KEY, 128, { KEY_ESC } },
/*
@@ -1526,18 +1525,16 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv, bool send_
if (priv->features.ctrl_ps2_aux_port)
i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE);
- if (send_events) {
- /*
- * On older models the EC controls the touchpad and toggles it
- * on/off itself, in this case we report KEY_TOUCHPAD_ON/_OFF.
- * If the EC did not toggle, report KEY_TOUCHPAD_TOGGLE.
- */
- if (value != priv->r_touchpad_val) {
- ideapad_input_report(priv, value ? 67 : 66);
- sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
- } else {
- ideapad_input_report(priv, 68);
- }
+ /*
+ * On older models the EC controls the touchpad and toggles it on/off
+ * itself, in this case we report KEY_TOUCHPAD_ON/_OFF. Some models do
+ * an acpi-notify with VPC bit 5 set on resume, so this function get
+ * called with send_events=true on every resume. Therefor if the EC did
+ * not toggle, do nothing to avoid sending spurious KEY_TOUCHPAD_TOGGLE.
+ */
+ if (send_events && value != priv->r_touchpad_val) {
+ ideapad_input_report(priv, value ? 67 : 66);
+ sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
}
priv->r_touchpad_val = value;
--
2.39.1
In the memory allocation of rp->domains in rapl_detect_domains(), there
is an additional memory of struct rapl_domain allocated to prevent the
pointer out of bounds called later.
Optimize the code here to save sizeof(struct rapl_domain) bytes of
memory.
Test in Intel NUC (i5-1135G7).
Cc: stable(a)vger.kernel.org
Signed-off-by: xiongxin <xiongxin(a)kylinos.cn>
Tested-by: xiongxin <xiongxin(a)kylinos.cn>
---
drivers/powercap/intel_rapl_common.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index 8970c7b80884..f8971282498a 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -1171,13 +1171,14 @@ static int rapl_package_register_powercap(struct rapl_package *rp)
{
struct rapl_domain *rd;
struct powercap_zone *power_zone = NULL;
- int nr_pl, ret;
+ int nr_pl, ret, i;
/* Update the domain data of the new package */
rapl_update_domain_data(rp);
/* first we register package domain as the parent zone */
- for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+ for (i = 0; i < rp->nr_domains; i++) {
+ rd = &rp->domains[i];
if (rd->id == RAPL_DOMAIN_PACKAGE) {
nr_pl = find_nr_power_limit(rd);
pr_debug("register package domain %s\n", rp->name);
@@ -1201,8 +1202,9 @@ static int rapl_package_register_powercap(struct rapl_package *rp)
return -ENODEV;
}
/* now register domains as children of the socket/package */
- for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+ for (i = 0; i < rp->nr_domains; i++) {
struct powercap_zone *parent = rp->power_zone;
+ rd = &rp->domains[i];
if (rd->id == RAPL_DOMAIN_PACKAGE)
continue;
@@ -1302,7 +1304,6 @@ static void rapl_detect_powerlimit(struct rapl_domain *rd)
*/
static int rapl_detect_domains(struct rapl_package *rp, int cpu)
{
- struct rapl_domain *rd;
int i;
for (i = 0; i < RAPL_DOMAIN_MAX; i++) {
@@ -1319,15 +1320,15 @@ static int rapl_detect_domains(struct rapl_package *rp, int cpu)
}
pr_debug("found %d domains on %s\n", rp->nr_domains, rp->name);
- rp->domains = kcalloc(rp->nr_domains + 1, sizeof(struct rapl_domain),
+ rp->domains = kcalloc(rp->nr_domains, sizeof(struct rapl_domain),
GFP_KERNEL);
if (!rp->domains)
return -ENOMEM;
rapl_init_domains(rp);
- for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++)
- rapl_detect_powerlimit(rd);
+ for (i = 0; i < rp->nr_domains; i++)
+ rapl_detect_powerlimit(&rp->domains[i]);
return 0;
}
--
2.34.1
Dzień dobry,
jakiś czas temu zgłosiła się do nas firma, której strona internetowa nie pozycjonowała się wysoko w wyszukiwarce Google.
Na podstawie wykonanego przez nas audytu SEO zoptymalizowaliśmy treści na stronie pod kątem wcześniej opracowanych słów kluczowych. Nasz wewnętrzny system codziennie analizuje prawidłowe działanie witryny. Dzięki indywidualnej strategii, firma zdobywa coraz więcej Klientów.
Czy chcieliby Państwo zwiększyć liczbę osób odwiedzających stronę internetową firmy? Mógłbym przedstawić ofertę?
Pozdrawiam
Przemysław Polak
This series fixes two bugs in the RTW88 USB driver I was reported from
several people and that I also encountered myself.
The first one resulted in "timed out to flush queue 3" messages from the
driver and sometimes a complete stall of the TX queues.
The second one is specific to the RTW8821CU chipset. Here 2GHz networks
were hardly seen and impossible to connect to. This goes down to
misinterpreting the rfe_option field in the efuse.
Sascha Hauer (2):
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: rtw8821c: Fix rfe_option field width
drivers/net/wireless/realtek/rtw88/rtw8821c.c | 3 +-
drivers/net/wireless/realtek/rtw88/usb.c | 70 +++++++++++++------
2 files changed, 48 insertions(+), 25 deletions(-)
--
2.39.2