- Linux-stable-mirror - lists.linaro.org

[PATCH v2 1/2] tty: serial: 8250_omap: fix tx with dma

by Mans Rullgard

Commit 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") introduced an error in the TX DMA handling for 8250_omap. When the OMAP_DMA_TX_KICK flag is set, one byte is pulled from the kfifo and emitted directly in order to start the DMA. This is done without updating DMA tx_size which leads to uart_xmit_advance() called in the DMA complete callback advancing the kfifo by one too much. In practice, transmitting N bytes has been seen to result in the last N-1 bytes being sent repeatedly. This change fixes the problem by moving all of the dma setup after the OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the dma size for the 4-byte cutoff check. This slightly changes the behaviour at buffer wraparound, but it still transmits the correct bytes somehow. At the point kfifo_dma_out_prepare_mapped is called, at least one byte is guaranteed to be in the fifo, so checking the return value is not necessary. Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") Cc: stable(a)vger.kernel.org Signed-off-by: Mans Rullgard <mans(a)mansr.com> --- v2: split patch in two --- drivers/tty/serial/8250/8250_omap.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index f1aee915bc02..180466e09605 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1173,16 +1173,6 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) return 0; } - sg_init_table(&sg, 1); - ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, - UART_XMIT_SIZE, dma->tx_addr); - if (ret != 1) { - serial8250_clear_THRI(p); - return 0; - } - - dma->tx_size = sg_dma_len(&sg); - if (priv->habit & OMAP_DMA_TX_KICK) { unsigned char c; u8 tx_lvl; @@ -1207,7 +1197,7 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) ret = -EBUSY; goto err; } - if (dma->tx_size < 4) { + if (kfifo_len(&tport->xmit_fifo) < 4) { ret = -EINVAL; goto err; } @@ -1216,11 +1206,12 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) goto err; } skip_byte = c; - /* now we need to recompute due to kfifo_get */ - kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, - UART_XMIT_SIZE, dma->tx_addr); } + sg_init_table(&sg, 1); + kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, + UART_XMIT_SIZE, dma->tx_addr); + desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { @@ -1228,6 +1219,7 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) goto err; } + dma->tx_size = sg_dma_len(&sg); dma->tx_running = 1; desc->callback = omap_8250_dma_tx_complete; @@ -1248,8 +1240,10 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) err: dma->tx_err = 1; out_skip: - if (skip_byte >= 0) + if (skip_byte >= 0) { serial_out(p, UART_TX, skip_byte); + p->port.icount.tx++; + } return ret; } -- 2.49.0

2 months

3
4
0 0

[PATCH] udf: Make sure i_lenExtents is uptodate on inode eviction

by Jan Kara

UDF maintains total length of all extents in i_lenExtents. Generally we keep extent lengths (and thus i_lenExtents) block aligned because it makes the file appending logic simpler. However the standard mandates that the inode size must match the length of all extents and thus we trim the last extent when closing the file. To catch possible bugs we also verify that i_lenExtents matches i_size when evicting inode from memory. Commit b405c1e58b73 ("udf: refactor udf_next_aext() to handle error") however broke the code updating i_lenExtents and thus udf_evict_inode() ended up spewing lots of errors about incorrectly sized extents although the extents were actually sized properly. Fix the updating of i_lenExtents to silence the errors. Fixes: b405c1e58b73 ("udf: refactor udf_next_aext() to handle error") CC: stable(a)vger.kernel.org Signed-off-by: Jan Kara <jack(a)suse.cz> --- fs/udf/truncate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) I plan to merge this fix to my tree. diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c index 4f33a4a48886..b4071c9cf8c9 100644 --- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -115,7 +115,7 @@ void udf_truncate_tail_extent(struct inode *inode) } /* This inode entry is in-memory only and thus we don't have to mark * the inode dirty */ - if (ret == 0) + if (ret >= 0) iinfo->i_lenExtents = inode->i_size; brelse(epos.bh); } -- 2.43.0

2 months

1
0
0 0

[PATCH v3] mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled

by Ignacio Moreno Gonzalez via B4 Relay

From: Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez(a)kuka.com> commit c4608d1bf7c6 ("mm: mmap: map MAP_STACK to VM_NOHUGEPAGE") maps the mmap option MAP_STACK to VM_NOHUGEPAGE. This is also done if CONFIG_TRANSPARENT_HUGETABLES is not defined. But in that case, the VM_NOHUGEPAGE does not make sense. Fixes: c4608d1bf7c6 ("mm: mmap: map MAP_STACK to VM_NOHUGEPAGE") Cc: stable(a)vger.kernel.org Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Reviewed-by: Yang Shi <yang(a)os.amperecomputing.com> Reviewed-by: Liam R. Howlett <Liam.Howlett(a)oracle.com> Signed-off-by: Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez(a)kuka.com> --- I discovered this issue when trying to use the tool CRIU to checkpoint and restore a container. Our running kernel is compiled without CONFIG_TRANSPARENT_HUGETABLES. CRIU parses the output of /proc/<pid>/smaps and saves the "nh" flag. When trying to restore the container, CRIU fails to restore the "nh" mappings, since madvise() MADV_NOHUGEPAGE always returns an error because CONFIG_TRANSPARENT_HUGETABLES is not defined. The mapping MAP_STACK -> VM_NOHUGEPAGE was introduced by commit c4608d1bf7c6 ("mm: mmap: map MAP_STACK to VM_NOHUGEPAGE") in order to fix a regression introduced by commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries"). The change introducing the regression (efa7df3e3bb5) was limited to THP kernels, but its fix (c4608d1bf7c6) is applied without checking if THP is set. The mapping MAP_STACK -> VM_NOHUGEPAGE should only be applied if THP is enabled. --- Changes in v3: - Exclude non-stable patch (for huge_mm.h) from this series to avoid mixing stable and non-stable patches, as suggested by Andrew. - Extend description in cover letter. - Link to v2: https://lore.kernel.org/r/20250506-map-map_stack-to-vm_nohugepage-only-if-t… Changes in v2: - [Patch 1/2] Use '#ifdef' instead of '#if defined(...)' - [Patch 1/2] Add 'Fixes: c4608d1bf7c6...' - Create [Patch 2/2] - Link to v1: https://lore.kernel.org/r/20250502-map-map_stack-to-vm_nohugepage-only-if-t… --- include/linux/mman.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/mman.h b/include/linux/mman.h index bce214fece16b9af3791a2baaecd6063d0481938..f4c6346a8fcd29b08d43f7cd9158c3eddc3383e1 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -155,7 +155,9 @@ calc_vm_flag_bits(struct file *file, unsigned long flags) return _calc_vm_trans(flags, MAP_GROWSDOWN, VM_GROWSDOWN ) | _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED ) | _calc_vm_trans(flags, MAP_SYNC, VM_SYNC ) | +#ifdef CONFIG_TRANSPARENT_HUGEPAGE _calc_vm_trans(flags, MAP_STACK, VM_NOHUGEPAGE) | +#endif arch_calc_vm_flag_bits(file, flags); } --- base-commit: fc96b232f8e7c0a6c282f47726b2ff6a5fb341d2 change-id: 20250428-map-map_stack-to-vm_nohugepage-only-if-thp-is-enabled-ce40a1de095d Best regards, -- Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez(a)kuka.com>

2 months

2
1
0 0

[PATCH] bus: firewall: Fix missing static inline annotations for stubs

by Krzysztof Kozlowski

Stubs in the header file for !CONFIG_STM32_FIREWALL case should be both static and inline, because they do not come with earlier declaration and should be inlined in every unit including the header. Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: <stable(a)vger.kernel.org> Fixes: 5c9668cfc6d7 ("firewall: introduce stm32_firewall framework") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- include/linux/bus/stm32_firewall_device.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h index 5178b72bc920..eaa7a3f54450 100644 --- a/include/linux/bus/stm32_firewall_device.h +++ b/include/linux/bus/stm32_firewall_device.h @@ -114,27 +114,30 @@ void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 su #else /* CONFIG_STM32_FIREWALL */ -int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall, - unsigned int nb_firewall) +static inline int stm32_firewall_get_firewall(struct device_node *np, + struct stm32_firewall *firewall, + unsigned int nb_firewall) { return -ENODEV; } -int stm32_firewall_grant_access(struct stm32_firewall *firewall) +static inline int stm32_firewall_grant_access(struct stm32_firewall *firewall) { return -ENODEV; } -void stm32_firewall_release_access(struct stm32_firewall *firewall) +static inline void stm32_firewall_release_access(struct stm32_firewall *firewall) { } -int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id) +static inline int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, + u32 subsystem_id) { return -ENODEV; } -void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id) +static inline void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, + u32 subsystem_id) { } -- 2.45.2

2 months

2
2
0 0

[PATCH 1/2] phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw_mode

by Wayne Chang

The logic that drives the pad calibration values resides in the controller reset domain and so the calibration values are only being captured when the controller is out of reset. However, by clearing the CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set while the controller is in reset. The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the trk_hw_mode flag, but this dependency is not necessary. Instead, introduce a new flag, trk_update_on_idle, to independently control this bit. Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support") Cc: stable(a)vger.kernel.org Signed-off-by: Wayne Chang <waynec(a)nvidia.com> --- drivers/phy/tegra/xusb-tegra186.c | 14 ++++++++------ drivers/phy/tegra/xusb.h | 1 + 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index fae6242aa730..dd0aaf305e90 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -650,14 +650,15 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) udelay(100); } - if (padctl->soc->trk_hw_mode) { - value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); - value |= USB2_TRK_HW_MODE; + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); + if (padctl->soc->trk_update_on_idle) value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE; - padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); - } else { + if (padctl->soc->trk_hw_mode) + value |= USB2_TRK_HW_MODE; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); + + if (!padctl->soc->trk_hw_mode) clk_disable_unprepare(priv->usb2_trk_clk); - } mutex_unlock(&padctl->lock); } @@ -1703,6 +1704,7 @@ const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = { .supports_gen2 = true, .poll_trk_completed = true, .trk_hw_mode = true, + .trk_update_on_idle = true, .supports_lp_cfg_en = true, }; EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc); diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h index 6e45d194c689..d2b5f9565132 100644 --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -434,6 +434,7 @@ struct tegra_xusb_padctl_soc { bool need_fake_usb3_port; bool poll_trk_completed; bool trk_hw_mode; + bool trk_update_on_idle; bool supports_lp_cfg_en; }; -- 2.25.1

2 months

2
1
0 0

[PATCH] parisc stable patch for kernel v6.13

by Helge Deller

Hi Greg, below is a backport for upstream patch fd87b7783802 ("net: Fix the devmem sock opts and msgs for parisc"). This upstream patch does not apply cleanly against v6.13, and backporting all intermediate changes are too big, so I created this trivial standalone patch instead. Can you please add the patch below to the stable queue for v6.13? Thanks! Helge --- From: Pranjal Shrivastava <praan(a)google.com> Date: Mon, 24 Mar 2025 07:42:27 +0000 Subject: [PATCH] net: Fix the devmem sock opts and msgs for parisc The devmem socket options and socket control message definitions introduced in the TCP devmem series[1] incorrectly continued the socket definitions for arch/parisc. The UAPI change seems safe as there are currently no drivers that declare support for devmem TCP RX via PP_FLAG_ALLOW_UNREADABLE_NETMEM. Hence, fixing this UAPI should be safe. Fix the devmem socket options and socket control message definitions to reflect the series followed by arch/parisc. [1] https://lore.kernel.org/lkml/20240910171458.219195-10-almasrymina@google.co… Patch modified for kernel 6.13 by Helge Deller. Fixes: 8f0b3cc9a4c10 ("tcp: RX path for devmem TCP") Signed-off-by: Pranjal Shrivastava <praan(a)google.com> Signed-off-by: Helge Deller <deller(a)gmx.de> diff --git b/arch/parisc/include/uapi/asm/socket.h a/arch/parisc/include/uapi/asm/socket.h index d268d69bfcd2..96831c988606 100644 --- b/arch/parisc/include/uapi/asm/socket.h +++ a/arch/parisc/include/uapi/asm/socket.h @@ -132,13 +132,15 @@ #define SO_PASSPIDFD 0x404A #define SO_PEERPIDFD 0x404B -#define SO_DEVMEM_LINEAR 78 +#define SCM_TS_OPT_ID 0x404C + +#define SO_RCVPRIORITY 0x404D + +#define SO_DEVMEM_LINEAR 0x404E #define SCM_DEVMEM_LINEAR SO_DEVMEM_LINEAR -#define SO_DEVMEM_DMABUF 79 +#define SO_DEVMEM_DMABUF 0x404F #define SCM_DEVMEM_DMABUF SO_DEVMEM_DMABUF -#define SO_DEVMEM_DONTNEED 80 - -#define SCM_TS_OPT_ID 0x404C +#define SO_DEVMEM_DONTNEED 0x4050 #if !defined(__KERNEL__)

2 months

2
1
0 0

[PATCH v13 0/4] Add STM32MP25 SPI NOR support

by Patrice Chotard

This series adds SPI NOR support for STM32MP25 SoCs from STMicroelectronics. On STM32MP25 SoCs family, an Octo Memory Manager block manages the muxing, the memory area split, the chip select override and the time constraint between its 2 Octo SPI children. Due to these depedencies, this series adds support for: - Octo Memory Manager driver. - Octo SPI driver. - yaml schema for Octo Memory Manager and Octo SPI drivers. The device tree files adds Octo Memory Manager and its 2 associated Octo SPI chidren in stm32mp251.dtsi and adds SPI NOR support in stm32mp257f-ev1 board. Signed-off-by: Patrice Chotard <patrice.chotard(a)foss.st.com> Changes in v13: - Make firewall prototypes always exposed. - Restore STM32_OMM Kconfig dependency from v11. - Link to v12: https://lore.kernel.org/r/20250506-upstream_ospi_v6-v12-0-e3bb5a0d78fb@foss… Changes in v12: - Update Kconfig dependencies. - Link to v11: https://lore.kernel.org/r/20250428-upstream_ospi_v6-v11-0-1548736fd9d2@foss… Changes in v11: - Add stm32_omm_toggle_child_clock(dev, false) in stm32_omm_disable_child() in case of error. - Check MUXEN bit in stm32_omm_probe() to check if child clock must be disabled. - Add dev_err_probe() in stm32_omm_probe(). - Link to v10: https://lore.kernel.org/r/20250422-upstream_ospi_v6-v10-0-6f4942a04e10@foss… Changes in v10: - Add of_node_put() in stm32_omm_set_amcr(). - Link to v9: https://lore.kernel.org/r/20250410-upstream_ospi_v6-v9-0-cf119508848a@foss.… Changes in v9: - split patchset by susbsystem, current one include only OMM related patches. - Update SPDX Identifiers to "GPL-2.0-only". - Add of_node_put)() instm32_omm_set_amcr(). - Rework error path in stm32_omm_toggle_child_clock(). - Make usage of reset_control_acquire/release() in stm32_omm_disable_child() and move reset_control_get in probe(). - Rename error label in stm32_omm_configure(). - Remove child compatible check in stm32_omm_probe(). - Make usage of devm_of_platform_populate(). - Link to v8: https://lore.kernel.org/r/20250407-upstream_ospi_v6-v8-0-7b7716c1c1f6@foss.… Changes in v8: - update OMM's dt-bindings: - Remove minItems for clocks and resets properties. - Fix st,syscfg-amcr items declaration. - move power-domains property before vendor specific properties. - Update compatible check wrongly introduced during internal tests in stm32_omm.c. - Move ommanager's node outside bus@42080000's node in stm32mp251.dtsi. - Link to v7: https://lore.kernel.org/r/20250401-upstream_ospi_v6-v7-0-0ef28513ed81@foss.… Changes in v7: - update OMM's dt-bindings by updating : - clock-names and reset-names properties. - spi unit-address node. - example. - update stm32mp251.dtsi to match with OMM's bindings update. - update stm32mp257f-ev1.dts to match with OMM's bindings update. - Link to v6: https://lore.kernel.org/r/20250321-upstream_ospi_v6-v6-0-37bbcab43439@foss.… Changes in v6: - Update MAINTAINERS file. - Remove previous patch 1/8 and 2/8, merged by Mark Brown in spi git tree. - Fix Signed-off-by order for patch 3. - OMM driver: - Add dev_err_probe() in error path. - Rename stm32_omm_enable_child_clock() to stm32_omm_toggle_child_clock(). - Reorder initialised/non-initialized variable in stm32_omm_configure() and stm32_omm_probe(). - Move pm_runtime_disable() calls from stm32_omm_configure() to stm32_omm_probe(). - Update children's clocks and reset management. - Use of_platform_populate() to probe children. - Add missing pm_runtime_disable(). - Remove useless stm32_omm_check_access's first parameter. - Update OMM's dt-bindings by adding OSPI's clocks and resets. - Update stm32mp251.dtsi by adding OSPI's clock and reset in OMM's node. Changes in v5: - Add Reviewed-by Krzysztof Kozlowski for patch 1 and 3. Changes in v4: - Add default value requested by Krzysztof for st,omm-req2ack-ns, st,omm-cssel-ovr and st,omm-mux properties in st,stm32mp25-omm.yaml - Remove constraint in free form test for st,omm-mux property. - Fix drivers/memory/Kconfig by replacing TEST_COMPILE_ by COMPILE_TEST. - Fix SPDX-License-Identifier for stm32-omm.c. - Fix Kernel test robot by fixing dev_err() format in stm32-omm.c. - Add missing pm_runtime_disable() in the error handling path in stm32-omm.c. - Replace an int by an unsigned int in stm32-omm.c - Remove uneeded "," after terminator in stm32-omm.c. - Update cover letter description to explain dependecies between Octo Memory Manager and its 2 Octo SPI children. Changes in v3: - Squash defconfig patches 8 and 9. - Update STM32 Octo Memory Manager controller bindings. - Rename st,stm32-omm.yaml to st,stm32mp25-omm.yaml. - Update STM32 OSPI controller bindings. - Reorder DT properties in .dtsi and .dts files. - Replace devm_reset_control_get_optional() by devm_reset_control_get_optional_exclusive() in stm32_omm.c. - Reintroduce region-memory-names management in stm32_omm.c. - Rename stm32_ospi_tx_poll() and stm32_ospi_tx() to respectively to stm32_ospi_poll() and stm32_ospi_xfer() in spi-stm32-ospi.c. - Set SPI_CONTROLLER_HALF_DUPLEX in controller flags in spi-stm32-ospi.c. Changes in v2: - Move STM32 Octo Memory Manager controller driver and bindings from misc to memory-controllers. - Update STM32 OSPI controller bindings. - Update STM32 Octo Memory Manager controller bindings. - Update STM32 Octo Memory Manager driver to match bindings update. - Update DT to match bindings update. Signed-off-by: Patrice Chotard <patrice.chotard(a)foss.st.com> --- Patrice Chotard (4): firewall: Always expose firewall prototype dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller memory: Add STM32 Octo Memory Manager driver MAINTAINERS: add entry for STM32 OCTO MEMORY MANAGER driver .../memory-controllers/st,stm32mp25-omm.yaml | 226 ++++++++++ MAINTAINERS | 6 + drivers/memory/Kconfig | 17 + drivers/memory/Makefile | 1 + drivers/memory/stm32_omm.c | 476 +++++++++++++++++++++ include/linux/bus/stm32_firewall_device.h | 10 +- 6 files changed, 735 insertions(+), 1 deletion(-) --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250320-upstream_ospi_v6-d432a8172105 Best regards, -- Patrice Chotard <patrice.chotard(a)foss.st.com>

2 months

3
5
0 0

[PATCH v1 0/7] ublk: Backport to 6.14-stable: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd

by Jared Holzman

This patchset backports a series of ublk fixes from upstream to 6.14-stable. Patch 7 fixes the race that can cause kernel panic when ublk server daemon is exiting. It depends on patches 1-6 which simplifies & improves IO canceling when ublk server daemon is exiting as described here: https://lore.kernel.org/linux-block/20250416035444.99569-1-ming.lei@redhat.… Ming Lei (5): ublk: add helper of ublk_need_map_io() ublk: move device reset into ublk_ch_release() ublk: remove __ublk_quiesce_dev() ublk: simplify aborting ublk request ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd Uday Shankar (2): ublk: properly serialize all FETCH_REQs ublk: improve detection and handling of ublk server exit drivers/block/ublk_drv.c | 550 +++++++++++++++++++++------------------ 1 file changed, 291 insertions(+), 259 deletions(-) -- 2.43.0

2 months

3
10
0 0

[PATCH] KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()

by Sebastian Ott

Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid. Fixes: fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") Signed-off-by: Sebastian Ott <sebott(a)redhat.com> Reviewed-by: Marc Zyngier <maz(a)kernel.org> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/kvmarm/3f5db4c7-ccce-fb95-595c-692fa7aad227@redhat.… --- arch/arm64/kvm/mmu.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 754f2fe0cc67..eeda92330ade 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -1501,6 +1501,11 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, return -EFAULT; } + if (!is_protected_kvm_enabled()) + memcache = &vcpu->arch.mmu_page_cache; + else + memcache = &vcpu->arch.pkvm_memcache; + /* * Permission faults just need to update the existing leaf entry, * and so normally don't require allocations from the memcache. The @@ -1510,13 +1515,11 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (!fault_is_perm || (logging_active && write_fault)) { int min_pages = kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu); - if (!is_protected_kvm_enabled()) { - memcache = &vcpu->arch.mmu_page_cache; + if (!is_protected_kvm_enabled()) ret = kvm_mmu_topup_memory_cache(memcache, min_pages); - } else { - memcache = &vcpu->arch.pkvm_memcache; + else ret = topup_hyp_memcache(memcache, min_pages); - } + if (ret) return ret; } base-commit: 92a09c47464d040866cf2b4cd052bc60555185fb -- 2.49.0

2 months

3
2
0 0

Re: [PATCH v4 00/24] Add support for HEVC and VP9 codecs in decoder

by Dikshita Agarwal

Hi All, Pls ignore this, b4 messed up. Will post a proper series soon. Thanks, Dikshita On 5/7/2025 12:10 PM, Dikshita Agarwal wrote: > Hi All, > > This patch series adds initial support for the HEVC(H.265) and VP9 > codecs in iris decoder. The objective of this work is to extend the > decoder's capabilities to handle HEVC and VP9 codec streams, > including necessary format handling and buffer management. > In addition, the series also includes a set of fixes to address issues > identified during testing of these additional codecs. > > These patches also address the comments and feedback received from the > RFC patches previously sent. I have made the necessary improvements > based on the community's suggestions. > > Changes in v4: > - Splitted patch patch 06/23 in two patches (Bryan) > - Simplified the conditional logic in patch 13/23 (Bryan) > - Fix the value of H265_NUM_TILE_ROW macro (Neil) > - Link to v3: https://lore.kernel.org/r/20250502-qcom-iris-hevc-vp9-v3-0-552158a10a7d@qui… > > Changes in v3: > - Introduced two wrappers with explicit names to handle destroy internal > buffers (Nicolas) > - Used sub state check instead of introducing new boolean (Vikash) > - Addressed other comments (Vikash) > - Reorderd patches to have all fixes patches first (Dmitry) > - Link to v2: > https://lore.kernel.org/r/20250428-qcom-iris-hevc-vp9-v2-0-3a6013ecb8a5@qui… > > Changes in v2: > - Added Changes to make sure all buffers are released in session close > (bryna) > - Added tracking for flush responses to fix a timing issue. > - Added a handling to fix timing issue in reconfig > - Splitted patch 06/20 in two patches (Bryan) > - Added missing fixes tag (bryan) > - Updated fluster report (Nicolas) > - Link to v1: > https://lore.kernel.org/r/20250408-iris-dec-hevc-vp9-v1-0-acd258778bd6@quic… > > Changes sinces RFC: > - Added additional fixes to address issues identified during further > testing. > - Moved typo fix to a seperate patch [Neil] > - Reordered the patches for better logical flow and clarity [Neil, > Dmitry] > - Added fixes tag wherever applicable [Neil, Dmitry] > - Removed the default case in the switch statement for codecs [Bryan] > - Replaced if-else statements with switch-case [Bryan] > - Added comments for mbpf [Bryan] > - RFC: > https://lore.kernel.org/linux-media/20250305104335.3629945-1-quic_dikshita@… > > This patch series depends on [1] & [2] > [1] > https://lore.kernel.org/linux-media/20250417-topic-sm8x50-iris-v10-v7-0-f02… > [2] > https://lore.kernel.org/linux-media/20250424-qcs8300_iris-v5-0-f118f505c300… > > These patches are tested on SM8250 and SM8550 with v4l2-ctl and > Gstreamer for HEVC and VP9 decoders, at the same time ensured that > the existing H264 decoder functionality remains uneffected. > > Note: 1 of the fluster compliance test is fixed with firmware [3] > [3]: > https://lore.kernel.org/linux-firmware/1a511921-446d-cdc4-0203-084c88a5dc1e… > > The result of fluster test on SM8550: > 131/147 testcases passed while testing JCT-VC-HEVC_V1 with > GStreamer-H.265-V4L2-Gst1.0. > The failing test case: > - 10 testcases failed due to unsupported 10 bit format. > - DBLK_A_MAIN10_VIXS_4 > - INITQP_B_Main10_Sony_1 > - TSUNEQBD_A_MAIN10_Technicolor_2 > - WP_A_MAIN10_Toshiba_3 > - WP_MAIN10_B_Toshiba_3 > - WPP_A_ericsson_MAIN10_2 > - WPP_B_ericsson_MAIN10_2 > - WPP_C_ericsson_MAIN10_2 > - WPP_E_ericsson_MAIN10_2 > - WPP_F_ericsson_MAIN10_2 > - 4 testcase failed due to unsupported resolution > - PICSIZE_A_Bossen_1 > - PICSIZE_B_Bossen_1 > - WPP_D_ericsson_MAIN10_2 > - WPP_D_ericsson_MAIN_2 > - 2 testcase failed due to CRC mismatch > - RAP_A_docomo_6 > - RAP_B_Bossen_2 > - BUG reported: > https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4392 > Analysis - First few frames in this discarded by firmware and are > sent to driver with 0 filled length. Driver send such buffers to > client with timestamp 0 and payload set to 0 and > make buf state to VB2_BUF_STATE_ERROR. Such buffers should be > dropped by GST. But instead, the first frame displayed as green > frame and when a valid buffer is sent to client later with same 0 > timestamp, its dropped, leading to CRC mismatch for first frame. > > 235/305 testcases passed while testing VP9-TEST-VECTORS with > GStreamer-VP9-V4L2-Gst1.0. > The failing test case: > - 64 testcases failed due to unsupported resolution > - vp90-2-02-size-08x08.webm > - vp90-2-02-size-08x10.webm > - vp90-2-02-size-08x16.webm > - vp90-2-02-size-08x18.webm > - vp90-2-02-size-08x32.webm > - vp90-2-02-size-08x34.webm > - vp90-2-02-size-08x64.webm > - vp90-2-02-size-08x66.webm > - vp90-2-02-size-10x08.webm > - vp90-2-02-size-10x10.webm > - vp90-2-02-size-10x16.webm > - vp90-2-02-size-10x18.webm > - vp90-2-02-size-10x32.webm > - vp90-2-02-size-10x34.webm > - vp90-2-02-size-10x64.webm > - vp90-2-02-size-10x66.webm > - vp90-2-02-size-16x08.webm > - vp90-2-02-size-16x10.webm > - vp90-2-02-size-16x16.webm > - vp90-2-02-size-16x18.webm > - vp90-2-02-size-16x32.webm > - vp90-2-02-size-16x34.webm > - vp90-2-02-size-16x64.webm > - vp90-2-02-size-16x66.webm > - vp90-2-02-size-18x08.webm > - vp90-2-02-size-18x10.webm > - vp90-2-02-size-18x16.webm > - vp90-2-02-size-18x18.webm > - vp90-2-02-size-18x32.webm > - vp90-2-02-size-18x34.webm > - vp90-2-02-size-18x64.webm > - vp90-2-02-size-18x66.webm > - vp90-2-02-size-32x08.webm > - vp90-2-02-size-32x10.webm > - vp90-2-02-size-32x16.webm > - vp90-2-02-size-32x18.webm > - vp90-2-02-size-32x32.webm > - vp90-2-02-size-32x34.webm > - vp90-2-02-size-32x64.webm > - vp90-2-02-size-32x66.webm > - vp90-2-02-size-34x08.webm > - vp90-2-02-size-34x10.webm > - vp90-2-02-size-34x16.webm > - vp90-2-02-size-34x18.webm > - vp90-2-02-size-34x32.webm > - vp90-2-02-size-34x34.webm > - vp90-2-02-size-34x64.webm > - vp90-2-02-size-34x66.webm > - vp90-2-02-size-64x08.webm > - vp90-2-02-size-64x10.webm > - vp90-2-02-size-64x16.webm > - vp90-2-02-size-64x18.webm > - vp90-2-02-size-64x32.webm > - vp90-2-02-size-64x34.webm > - vp90-2-02-size-64x64.webm > - vp90-2-02-size-64x66.webm > - vp90-2-02-size-66x08.webm > - vp90-2-02-size-66x10.webm > - vp90-2-02-size-66x16.webm > - vp90-2-02-size-66x18.webm > - vp90-2-02-size-66x32.webm > - vp90-2-02-size-66x34.webm > - vp90-2-02-size-66x64.webm > - vp90-2-02-size-66x66.webm > - 2 testcases failed due to unsupported format > - vp91-2-04-yuv422.webm > - vp91-2-04-yuv444.webm > - 1 testcase failed with CRC mismatch > - vp90-2-22-svc_1280x720_3.ivf > - Bug reported: > https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4371 > - 2 testcase failed due to unsupported resolution after sequence change > - vp90-2-21-resize_inter_320x180_5_1-2.webm > - vp90-2-21-resize_inter_320x180_7_1-2.webm > - 1 testcase failed due to unsupported stream > - vp90-2-16-intra-only.webm > > The result of fluster test on SM8250: > 133/147 testcases passed while testing JCT-VC-HEVC_V1 with > GStreamer-H.265-V4L2-Gst1.0. > The failing test case: > - 10 testcases failed due to unsupported 10 bit format. > - DBLK_A_MAIN10_VIXS_4 > - INITQP_B_Main10_Sony_1 > - TSUNEQBD_A_MAIN10_Technicolor_2 > - WP_A_MAIN10_Toshiba_3 > - WP_MAIN10_B_Toshiba_3 > - WPP_A_ericsson_MAIN10_2 > - WPP_B_ericsson_MAIN10_2 > - WPP_C_ericsson_MAIN10_2 > - WPP_E_ericsson_MAIN10_2 > - WPP_F_ericsson_MAIN10_2 > - 4 testcase failed due to unsupported resolution > - PICSIZE_A_Bossen_1 > - PICSIZE_B_Bossen_1 > - WPP_D_ericsson_MAIN10_2 > - WPP_D_ericsson_MAIN_2 > > 232/305 testcases passed while testing VP9-TEST-VECTORS with > GStreamer-VP9-V4L2-Gst1.0. > The failing test case: > - 64 testcases failed due to unsupported resolution > - vp90-2-02-size-08x08.webm > - vp90-2-02-size-08x10.webm > - vp90-2-02-size-08x16.webm > - vp90-2-02-size-08x18.webm > - vp90-2-02-size-08x32.webm > - vp90-2-02-size-08x34.webm > - vp90-2-02-size-08x64.webm > - vp90-2-02-size-08x66.webm > - vp90-2-02-size-10x08.webm > - vp90-2-02-size-10x10.webm > - vp90-2-02-size-10x16.webm > - vp90-2-02-size-10x18.webm > - vp90-2-02-size-10x32.webm > - vp90-2-02-size-10x34.webm > - vp90-2-02-size-10x64.webm > - vp90-2-02-size-10x66.webm > - vp90-2-02-size-16x08.webm > - vp90-2-02-size-16x10.webm > - vp90-2-02-size-16x16.webm > - vp90-2-02-size-16x18.webm > - vp90-2-02-size-16x32.webm > - vp90-2-02-size-16x34.webm > - vp90-2-02-size-16x64.webm > - vp90-2-02-size-16x66.webm > - vp90-2-02-size-18x08.webm > - vp90-2-02-size-18x10.webm > - vp90-2-02-size-18x16.webm > - vp90-2-02-size-18x18.webm > - vp90-2-02-size-18x32.webm > - vp90-2-02-size-18x34.webm > - vp90-2-02-size-18x64.webm > - vp90-2-02-size-18x66.webm > - vp90-2-02-size-32x08.webm > - vp90-2-02-size-32x10.webm > - vp90-2-02-size-32x16.webm > - vp90-2-02-size-32x18.webm > - vp90-2-02-size-32x32.webm > - vp90-2-02-size-32x34.webm > - vp90-2-02-size-32x64.webm > - vp90-2-02-size-32x66.webm > - vp90-2-02-size-34x08.webm > - vp90-2-02-size-34x10.webm > - vp90-2-02-size-34x16.webm > - vp90-2-02-size-34x18.webm > - vp90-2-02-size-34x32.webm > - vp90-2-02-size-34x34.webm > - vp90-2-02-size-34x64.webm > - vp90-2-02-size-34x66.webm > - vp90-2-02-size-64x08.webm > - vp90-2-02-size-64x10.webm > - vp90-2-02-size-64x16.webm > - vp90-2-02-size-64x18.webm > - vp90-2-02-size-64x32.webm > - vp90-2-02-size-64x34.webm > - vp90-2-02-size-64x64.webm > - vp90-2-02-size-64x66.webm > - vp90-2-02-size-66x08.webm > - vp90-2-02-size-66x10.webm > - vp90-2-02-size-66x16.webm > - vp90-2-02-size-66x18.webm > - vp90-2-02-size-66x32.webm > - vp90-2-02-size-66x34.webm > - vp90-2-02-size-66x64.webm > - vp90-2-02-size-66x66.webm > - 2 testcases failed due to unsupported format > - vp91-2-04-yuv422.webm > - vp91-2-04-yuv444.webm > - 1 testcase failed with CRC mismatch > - vp90-2-22-svc_1280x720_3.ivf > - Bug raised: > https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4371 > - 5 testcase failed due to unsupported resolution after sequence change > - vp90-2-21-resize_inter_320x180_5_1-2.webm > - vp90-2-21-resize_inter_320x180_7_1-2.webm > - vp90-2-21-resize_inter_320x240_5_1-2.webm > - vp90-2-21-resize_inter_320x240_7_1-2.webm > - vp90-2-18-resize.ivf > - 1 testcase failed with CRC mismatch > - vp90-2-16-intra-only.webm > Analysis: First few frames are marked by firmware as NO_SHOW frame. > Driver make buf state to VB2_BUF_STATE_ERROR for such frames. > Such buffers should be dropped by GST. But instead, the first frame > is being displayed and when a valid buffer is sent to client later > with same timestamp, its dropped, leading to CRC mismatch for first > frame. > > Signed-off-by: Dikshita Agarwal <dikshita(a)qti.qualcomm.com> > --- > Dikshita Agarwal (24): > media: iris: Skip destroying internal buffer if not dequeued > media: iris: Update CAPTURE format info based on OUTPUT format > media: iris: Avoid updating frame size to firmware during reconfig > media: iris: Drop port check for session property response > media: iris: Prevent HFI queue writes when core is in deinit state > media: iris: Remove error check for non-zero v4l2 controls > media: iris: Remove deprecated property setting to firmware > media: iris: Fix missing function pointer initialization > media: iris: Fix NULL pointer dereference > media: iris: Fix typo in depth variable > media: iris: Track flush responses to prevent premature completion > media: iris: Fix buffer preparation failure during resolution change > media: iris: Send V4L2_BUF_FLAG_ERROR for capture buffers with 0 filled length > media: iris: Skip flush on first sequence change > media: iris: Add handling for corrupt and drop frames > media: iris: Add handling for no show frames > media: iris: Improve last flag handling > media: iris: Remove redundant buffer count check in stream off > media: iris: Add a comment to explain usage of MBPS > media: iris: Add HEVC and VP9 formats for decoder > media: iris: Add platform capabilities for HEVC and VP9 decoders > media: iris: Set mandatory properties for HEVC and VP9 decoders. > media: iris: Add internal buffer calculation for HEVC and VP9 decoders > media: iris: Add codec specific check for VP9 decoder drain handling > > drivers/media/platform/qcom/iris/iris_buffer.c | 35 +- > drivers/media/platform/qcom/iris/iris_buffer.h | 3 +- > drivers/media/platform/qcom/iris/iris_ctrls.c | 35 +- > drivers/media/platform/qcom/iris/iris_hfi_common.h | 1 + > .../platform/qcom/iris/iris_hfi_gen1_command.c | 48 ++- > .../platform/qcom/iris/iris_hfi_gen1_defines.h | 5 +- > .../platform/qcom/iris/iris_hfi_gen1_response.c | 37 +- > .../platform/qcom/iris/iris_hfi_gen2_command.c | 143 +++++++- > .../platform/qcom/iris/iris_hfi_gen2_defines.h | 5 + > .../platform/qcom/iris/iris_hfi_gen2_response.c | 56 ++- > drivers/media/platform/qcom/iris/iris_hfi_queue.c | 2 +- > drivers/media/platform/qcom/iris/iris_instance.h | 6 + > .../platform/qcom/iris/iris_platform_common.h | 28 +- > .../media/platform/qcom/iris/iris_platform_gen2.c | 198 ++++++++-- > .../platform/qcom/iris/iris_platform_qcs8300.h | 126 +++++-- > .../platform/qcom/iris/iris_platform_sm8250.c | 15 +- > drivers/media/platform/qcom/iris/iris_state.c | 2 +- > drivers/media/platform/qcom/iris/iris_state.h | 1 + > drivers/media/platform/qcom/iris/iris_vb2.c | 18 +- > drivers/media/platform/qcom/iris/iris_vdec.c | 116 +++--- > drivers/media/platform/qcom/iris/iris_vdec.h | 11 + > drivers/media/platform/qcom/iris/iris_vidc.c | 36 +- > drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 397 ++++++++++++++++++++- > drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 46 ++- > 24 files changed, 1159 insertions(+), 211 deletions(-) > --- > base-commit: 398a1b33f1479af35ca915c5efc9b00d6204f8fa > change-id: 20250506-video-iris-hevc-vp9-ee13f23dd9a8 > prerequisite-message-id: <20250417-topic-sm8x50-iris-v10-v7-0-f020cb1d0e98(a)linaro.org> > prerequisite-patch-id: afffe7096c8e110a8da08c987983bc4441d39578 > prerequisite-patch-id: b93c37dc7e09d1631b75387dc1ca90e3066dce17 > prerequisite-patch-id: b7b50aa1657be59fd51c3e53d73382a1ee75a08e > prerequisite-patch-id: 30960743105a36f20b3ec4a9ff19e7bca04d6add > prerequisite-patch-id: 2bba98151ca103aa62a513a0fbd0df7ae64d9868 > prerequisite-patch-id: 0e43a6d758b5fa5ab921c6aa3c19859e312b47d0 > prerequisite-patch-id: 35f8dae1416977e88c2db7c767800c01822e266e > prerequisite-message-id: <20250501-qcs8300_iris-v7-0-b229d5347990(a)quicinc.com> > prerequisite-patch-id: e35b05c527217206ae871aef0d7b0261af0319ea > prerequisite-patch-id: 07ba0745c7d72796567e0a57f5c8e5355a8d2046 > prerequisite-patch-id: 3398937a7fabb45934bb98a530eef73252231132 > prerequisite-patch-id: 500bc3b8391940d3ebca222d2098b737414b2af4 > prerequisite-patch-id: 2e72fe4d11d264db3d42fa450427d30171303c6f > > Best regards,

2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror