- Linux-stable-mirror - lists.linaro.org

[PATCH] media: mtk-mdp: Fix a reference leak in mtk_mdp_probe()

by Haoxiang Li

vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak. Fixes: ee18fc7b0b95 ("media: mtk-mdp: handle vpu_wdt_reg_handler() errors during probe") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/media/platform/mediatek/mdp/mtk_mdp_core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c index 80fdc6ff57e0..6aedb6033010 100644 --- a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c +++ b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c @@ -198,7 +198,7 @@ static int mtk_mdp_probe(struct platform_device *pdev) VPU_RST_MDP); if (ret) { dev_err(&pdev->dev, "Failed to register reset handler\n"); - goto err_m2m_register; + goto err_vpu_get_dev; } platform_set_drvdata(pdev, mdp); @@ -206,7 +206,7 @@ static int mtk_mdp_probe(struct platform_device *pdev) ret = vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { dev_err(&pdev->dev, "Failed to set vb2 dma mag seg size\n"); - goto err_m2m_register; + goto err_vpu_get_dev; } pm_runtime_enable(dev); @@ -214,6 +214,9 @@ static int mtk_mdp_probe(struct platform_device *pdev) return 0; +err_vpu_get_dev: + platform_device_put(mdp->vpu_dev); + err_m2m_register: v4l2_device_unregister(&mdp->v4l2_dev); -- 2.25.1

1 month, 2 weeks

2
1
0 0

I look forward to your response

by Mr. Peter Hosmeyer

Greetings, The GOSFORD FINANCE & LOANS LTD (UK) invites you to partner with us and benefit from our new Loan and Project funding program. We offer loans and funding for various good projects. This, however, is in the form of a partnership. Do you have projects and businesses that require funding? We are ready to give out Loans (Any big Loan), at just 2% per annum for 15 years. If you're interested in any of our proposals, then send My email and your mobile phone number connected to whatsapp, more details on our Loan Investment Funding Plan. I look forward to your response Best Regards. Mr. Peter Hosmeyer. peter.hosmeyer(a)janushendersons.com

1 month, 2 weeks

1
0
0 0

[PATCH] binder: fix double-free in dbitmap

by Carlos Llamas

A process might fail to allocate a new bitmap when trying to expand its proc->dmap. In that case, dbitmap_grow() fails and frees the old bitmap via dbitmap_free(). However, the driver calls dbitmap_free() again when the same process terminates, leading to a double-free error: ================================================================== BUG: KASAN: double-free in binder_proc_dec_tmpref+0x2e0/0x55c Free of addr ffff00000b7c1420 by task kworker/9:1/209 CPU: 9 UID: 0 PID: 209 Comm: kworker/9:1 Not tainted 6.17.0-rc6-dirty #5 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: kfree+0x164/0x31c binder_proc_dec_tmpref+0x2e0/0x55c binder_deferred_func+0xc24/0x1120 process_one_work+0x520/0xba4 [...] Allocated by task 448: __kmalloc_noprof+0x178/0x3c0 bitmap_zalloc+0x24/0x30 binder_open+0x14c/0xc10 [...] Freed by task 449: kfree+0x184/0x31c binder_inc_ref_for_node+0xb44/0xe44 binder_transaction+0x29b4/0x7fbc binder_thread_write+0x1708/0x442c binder_ioctl+0x1b50/0x2900 [...] ================================================================== Fix this issue by marking proc->map NULL in dbitmap_free(). Cc: stable(a)vger.kernel.org Fixes: 15d9da3f818c ("binder: use bitmap for faster descriptor lookup") Signed-off-by: Carlos Llamas <cmllamas(a)google.com> --- drivers/android/dbitmap.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/android/dbitmap.h b/drivers/android/dbitmap.h index 956f1bd087d1..c7299ce8b374 100644 --- a/drivers/android/dbitmap.h +++ b/drivers/android/dbitmap.h @@ -37,6 +37,7 @@ static inline void dbitmap_free(struct dbitmap *dmap) { dmap->nbits = 0; kfree(dmap->map); + dmap->map = NULL; } /* Returns the nbits that a dbitmap can shrink to, 0 if not possible. */ -- 2.51.0.384.g4c02a37b29-goog

1 month, 2 weeks

3
2
0 0

[PATCH v12] Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw

by Shuai Zhang

On QCS9075 and QCA8275 platforms, the BT_EN pin is always pulled up by hw and cannot be controlled by the host. As a result, in case of a firmware crash, the host cannot trigger a cold reset. Instead, the BT controller performs a warm restart on its own, without reloading the firmware. This leads to the controller remaining in IBS_WAKE state, while the host expects it to be in sleep mode. The mismatch causes HCI reset commands to time out. Additionally, the driver does not clear internal flags QCA_SSR_TRIGGERED and QCA_IBS_DISABLED, which blocks the reset sequence. If the SSR duration exceeds 2 seconds, the host may enter TX sleep mode due to tx_idle_timeout, further preventing recovery. Also, memcoredump_flag is not cleared, so only the first SSR generates a coredump. Tell driver that BT controller has undergone a proper restart sequence: - Clear QCA_SSR_TRIGGERED and QCA_IBS_DISABLED flags after SSR. - Add a 50ms delay to allow the controller to complete its warm reset. - Reset tx_idle_timer to prevent the host from entering TX sleep mode. - Clear memcoredump_flag to allow multiple coredump captures. Apply these steps only when HCI_QUIRK_NON_PERSISTENT_SETUP is not set, which indicates that BT_EN is defined in DTS and cannot be toggled. Refer to the comment in include/net/bluetooth/hci.h for details on HCI_QUIRK_NON_PERSISTENT_SETUP. Changes in v12: - Rewrote commit to clarify the actual issue and affected platforms. - Used imperative language to describe the fix. - Explained the role of HCI_QUIRK_NON_PERSISTENT_SETUP. Signed-off-by: Shuai Zhang <quic_shuaz(a)quicinc.com> --- drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 4cff4d9be..2d6560482 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1653,6 +1653,39 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code) skb_queue_purge(&qca->rx_memdump_q); } + /* + * If the BT chip's bt_en pin is connected to a 3.3V power supply via + * hardware and always stays high, driver cannot control the bt_en pin. + * As a result, during SSR (SubSystem Restart), QCA_SSR_TRIGGERED and + * QCA_IBS_DISABLED flags cannot be cleared, which leads to a reset + * command timeout. + * Add an msleep delay to ensure controller completes the SSR process. + * + * Host will not download the firmware after SSR, controller to remain + * in the IBS_WAKE state, and the host needs to synchronize with it + * + * Since the bluetooth chip has been reset, clear the memdump state. + */ + if (!hci_test_quirk(hu->hdev, HCI_QUIRK_NON_PERSISTENT_SETUP)) { + /* + * When the SSR (SubSystem Restart) duration exceeds 2 seconds, + * it triggers host tx_idle_delay, which sets host TX state + * to sleep. Reset tx_idle_timer after SSR to prevent + * host enter TX IBS_Sleep mode. + */ + mod_timer(&qca->tx_idle_timer, jiffies + + msecs_to_jiffies(qca->tx_idle_delay)); + + /* Controller reset completion time is 50ms */ + msleep(50); + + clear_bit(QCA_SSR_TRIGGERED, &qca->flags); + clear_bit(QCA_IBS_DISABLED, &qca->flags); + + qca->tx_ibs_state = HCI_IBS_TX_AWAKE; + qca->memdump_state = QCA_MEMDUMP_IDLE; + } + clear_bit(QCA_HW_ERROR_EVENT, &qca->flags); } -- 2.34.1

1 month, 2 weeks

3
2
0 0

[PATCH net v1 1/1] net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups

by Oleksij Rempel

Drop phylink_{suspend,resume}() from ax88772 PM callbacks. MDIO bus accesses have their own runtime-PM handling and will try to wake the device if it is suspended. Such wake attempts must not happen from PM callbacks while the device PM lock is held. Since phylink {sus|re}sume may trigger MDIO, it must not be called in PM context. No extra phylink PM handling is required for this driver: - .ndo_open/.ndo_stop control the phylink start/stop lifecycle. - ethtool/phylib entry points run in process context, not PM. - phylink MAC ops program the MAC on link changes after resume. Fixes: e0bffe3e6894 ("net: asix: ax88772: migrate to phylink") Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632(a)gmail.com> Cc: stable(a)vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> --- drivers/net/usb/asix_devices.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 792ddda1ad49..1e8f7089f5e8 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -607,15 +607,8 @@ static const struct net_device_ops ax88772_netdev_ops = { static void ax88772_suspend(struct usbnet *dev) { - struct asix_common_private *priv = dev->driver_priv; u16 medium; - if (netif_running(dev->net)) { - rtnl_lock(); - phylink_suspend(priv->phylink, false); - rtnl_unlock(); - } - /* Stop MAC operation */ medium = asix_read_medium_status(dev, 1); medium &= ~AX_MEDIUM_RE; @@ -644,12 +637,6 @@ static void ax88772_resume(struct usbnet *dev) for (i = 0; i < 3; i++) if (!priv->reset(dev, 1)) break; - - if (netif_running(dev->net)) { - rtnl_lock(); - phylink_resume(priv->phylink); - rtnl_unlock(); - } } static int asix_resume(struct usb_interface *intf) -- 2.47.3

1 month, 2 weeks

8
20
0 0

[PATCH v11] Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw

by Shuai Zhang

When the host actively triggers SSR and collects coredump data, the Bluetooth stack sends a reset command to the controller. However, due to the inability to clear the QCA_SSR_TRIGGERED and QCA_IBS_DISABLED bits, the reset command times out. To address this, this patch clears the QCA_SSR_TRIGGERED and QCA_IBS_DISABLED flags and adds a 50ms delay after SSR, but only when HCI_QUIRK_NON_PERSISTENT_SETUP is not set. This ensures the controller completes the SSR process when BT_EN is always high due to hardware. For the purpose of HCI_QUIRK_NON_PERSISTENT_SETUP, please refer to the comment in `include/net/bluetooth/hci.h`. The HCI_QUIRK_NON_PERSISTENT_SETUP quirk is associated with BT_EN, and its presence can be used to determine whether BT_EN is defined in DTS. After SSR, host will not download the firmware, causing controller to remain in the IBS_WAKE state. Host needs to synchronize with the controller to maintain proper operation. Multiple triggers of SSR only first generate coredump file, due to memcoredump_flag no clear. add clear coredump flag when ssr completed. When the SSR duration exceeds 2 seconds, it triggers host tx_idle_timeout, which sets host TX state to sleep. due to the hardware pulling up bt_en, the firmware is not downloaded after the SSR. As a result, the controller does not enter sleep mode. Consequently, when the host sends a command afterward, it sends 0xFD to the controller, but the controller does not respond, leading to a command timeout. So reset tx_idle_timer after SSR to prevent host enter TX IBS_Sleep mode. --- Changs since v10: -- Update base patch to latest patch. Changs since v8-v9: -- Update base patch to latest patch. -- add Cc stable(a)vger.kernel.org on signed-of. Changes since v6-7: - Merge the changes into a single patch. - Update commit. Changes since v1-5: - Add an explanation for HCI_QUIRK_NON_PERSISTENT_SETUP. - Add commments for msleep(50). - Update format and commit. Signed-off-by: Shuai Zhang <quic_shuaz(a)quicinc.com> Cc: stable(a)vger.kernel.org --- drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 4cff4d9be..2d6560482 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1653,6 +1653,39 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code) skb_queue_purge(&qca->rx_memdump_q); } + /* + * If the BT chip's bt_en pin is connected to a 3.3V power supply via + * hardware and always stays high, driver cannot control the bt_en pin. + * As a result, during SSR (SubSystem Restart), QCA_SSR_TRIGGERED and + * QCA_IBS_DISABLED flags cannot be cleared, which leads to a reset + * command timeout. + * Add an msleep delay to ensure controller completes the SSR process. + * + * Host will not download the firmware after SSR, controller to remain + * in the IBS_WAKE state, and the host needs to synchronize with it + * + * Since the bluetooth chip has been reset, clear the memdump state. + */ + if (!hci_test_quirk(hu->hdev, HCI_QUIRK_NON_PERSISTENT_SETUP)) { + /* + * When the SSR (SubSystem Restart) duration exceeds 2 seconds, + * it triggers host tx_idle_delay, which sets host TX state + * to sleep. Reset tx_idle_timer after SSR to prevent + * host enter TX IBS_Sleep mode. + */ + mod_timer(&qca->tx_idle_timer, jiffies + + msecs_to_jiffies(qca->tx_idle_delay)); + + /* Controller reset completion time is 50ms */ + msleep(50); + + clear_bit(QCA_SSR_TRIGGERED, &qca->flags); + clear_bit(QCA_IBS_DISABLED, &qca->flags); + + qca->tx_ibs_state = HCI_IBS_TX_AWAKE; + qca->memdump_state = QCA_MEMDUMP_IDLE; + } + clear_bit(QCA_HW_ERROR_EVENT, &qca->flags); } -- 2.34.1

1 month, 2 weeks

2
3
0 0

[PATCH] mfd: rz-mtu3: fix MTU5 NFCR register offset

by Cosmin Tanislav

The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet Page 725, Table 16.4. The address of all registers is offset by 0x1200, making the proper address of MTU5 NFCR register be 0x895. Cc: stable(a)vger.kernel.org Fixes: 654c293e1687 ("mfd: Add Renesas RZ/G2L MTU3a core driver") Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa(a)renesas.com> --- drivers/mfd/rz-mtu3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/rz-mtu3.c b/drivers/mfd/rz-mtu3.c index f3dac4a29a83..9cdfef610398 100644 --- a/drivers/mfd/rz-mtu3.c +++ b/drivers/mfd/rz-mtu3.c @@ -32,7 +32,7 @@ static const unsigned long rz_mtu3_8bit_ch_reg_offs[][13] = { [RZ_MTU3_CHAN_2] = MTU_8BIT_CH_1_2(0x204, 0x092, 0x205, 0x200, 0x20c, 0x201, 0x202), [RZ_MTU3_CHAN_3] = MTU_8BIT_CH_3_4_6_7(0x008, 0x093, 0x02c, 0x000, 0x04c, 0x002, 0x004, 0x005, 0x038), [RZ_MTU3_CHAN_4] = MTU_8BIT_CH_3_4_6_7(0x009, 0x094, 0x02d, 0x001, 0x04d, 0x003, 0x006, 0x007, 0x039), - [RZ_MTU3_CHAN_5] = MTU_8BIT_CH_5(0xab2, 0x1eb, 0xab4, 0xab6, 0xa84, 0xa85, 0xa86, 0xa94, 0xa95, 0xa96, 0xaa4, 0xaa5, 0xaa6), + [RZ_MTU3_CHAN_5] = MTU_8BIT_CH_5(0xab2, 0x895, 0xab4, 0xab6, 0xa84, 0xa85, 0xa86, 0xa94, 0xa95, 0xa96, 0xaa4, 0xaa5, 0xaa6), [RZ_MTU3_CHAN_6] = MTU_8BIT_CH_3_4_6_7(0x808, 0x893, 0x82c, 0x800, 0x84c, 0x802, 0x804, 0x805, 0x838), [RZ_MTU3_CHAN_7] = MTU_8BIT_CH_3_4_6_7(0x809, 0x894, 0x82d, 0x801, 0x84d, 0x803, 0x806, 0x807, 0x839), [RZ_MTU3_CHAN_8] = MTU_8BIT_CH_8(0x404, 0x098, 0x400, 0x406, 0x401, 0x402, 0x403) -- 2.51.0

1 month, 2 weeks

3
2
0 0

[PATCH] drm/amd: Only restore cached manual clock settings in restore if OD enabled

by Mario Limonciello

If OD is not enabled then restoring cached clock settings doesn't make sense and actually leads to errors in resume. Check if enabled before restoring settings. Fixes: 796ff8a7e01bd ("drm/amd: Restore cached manual clock settings during resume") Cc: stable(a)vger.kernel.org Reported-by: Jérôme Lécuyer <jerome.4a4c(a)gmail.com> Closes: https://lore.kernel.org/amd-gfx/0ffe2692-7bfa-4821-856e-dd0f18e2c32b@amd.co… Suggested-by: Jérôme Lécuyer <jerome.4a4c(a)gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index bf2b38dd7e25..fb8086859857 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -2263,7 +2263,7 @@ static int smu_resume(struct amdgpu_ip_block *ip_block) return ret; } - if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) { + if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL && smu->od_enabled) { ret = smu_od_edit_dpm_table(smu, PP_OD_COMMIT_DPM_TABLE, NULL, 0); if (ret) return ret; -- 2.49.0

1 month, 2 weeks

2
1
0 0

[PATCH v1] ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275

by Mohammad Rafi Shaik

The QCS8275 board is based on Qualcomm's QCS8300 SoC family, and all supported firmware files are located in the qcs8300 directory. The sound topology and ALSA UCM configuration files have also been migrated from the qcs8275 directory to the actual SoC qcs8300 directory in linux-firmware. With the current setup, the sound topology fails to load, resulting in sound card registration failure. This patch updates the driver match data to use the correct driver name qcs8300 for the qcs8275-sndcard, ensuring that the sound card driver correctly loads the sound topology and ALSA UCM configuration files from the qcs8300 directory. Fixes: 34d340d48e595 ("ASoC: qcom: sc8280xp: Add support for QCS8275") Cc: stable(a)vger.kernel.org Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik(a)oss.qualcomm.com> --- sound/soc/qcom/sc8280xp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index 73f9f82c4e25..db48168b7d3f 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -186,7 +186,7 @@ static int sc8280xp_platform_probe(struct platform_device *pdev) static const struct of_device_id snd_sc8280xp_dt_match[] = { {.compatible = "qcom,qcm6490-idp-sndcard", "qcm6490"}, {.compatible = "qcom,qcs6490-rb3gen2-sndcard", "qcs6490"}, - {.compatible = "qcom,qcs8275-sndcard", "qcs8275"}, + {.compatible = "qcom,qcs8275-sndcard", "qcs8300"}, {.compatible = "qcom,qcs9075-sndcard", "qcs9075"}, {.compatible = "qcom,qcs9100-sndcard", "qcs9100"}, {.compatible = "qcom,sc8280xp-sndcard", "sc8280xp"}, -- 2.34.1

1 month, 2 weeks

4
3
0 0

[PATCH 6.6.y] ksmbd: fix null pointer dereference in alloc_preauth_hash()

by Subramaniam, Sujana

From: Sujana Subramaniam <sujana.subramaniam(a)sap.com> [ Upstream commit c8b5b7c5da7d0c31c9b7190b4a7bba5281fc4780 ] The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete. Cc: stable(a)vger.kernel.org Tested-by: Steve French <stfrench(a)microsoft.com> Reported-by: zdi-disclosures(a)trendmicro.com # ZDI-CAN-26505 Signed-off-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Jan Alexander Preissler <akendo(a)akendo.eu> Signed-off-by: Sujana Subramaniam <sujana.subramaniam(a)sap.com> --- fs/smb/server/connection.h | 11 +++++++++++ fs/smb/server/mgmt/user_session.c | 4 ++-- fs/smb/server/smb2pdu.c | 14 +++++++++++--- 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/fs/smb/server/connection.h b/fs/smb/server/connection.h index 29ba91fc5407..45421269ddd8 100644 --- a/fs/smb/server/connection.h +++ b/fs/smb/server/connection.h @@ -27,6 +27,7 @@ enum { KSMBD_SESS_EXITING, KSMBD_SESS_NEED_RECONNECT, KSMBD_SESS_NEED_NEGOTIATE, + KSMBD_SESS_NEED_SETUP, KSMBD_SESS_RELEASING }; @@ -195,6 +196,11 @@ static inline bool ksmbd_conn_need_negotiate(struct ksmbd_conn *conn) return READ_ONCE(conn->status) == KSMBD_SESS_NEED_NEGOTIATE; } +static inline bool ksmbd_conn_need_setup(struct ksmbd_conn *conn) +{ + return READ_ONCE(conn->status) == KSMBD_SESS_NEED_SETUP; +} + static inline bool ksmbd_conn_need_reconnect(struct ksmbd_conn *conn) { return READ_ONCE(conn->status) == KSMBD_SESS_NEED_RECONNECT; @@ -225,6 +231,11 @@ static inline void ksmbd_conn_set_need_negotiate(struct ksmbd_conn *conn) WRITE_ONCE(conn->status, KSMBD_SESS_NEED_NEGOTIATE); } +static inline void ksmbd_conn_set_need_setup(struct ksmbd_conn *conn) +{ + WRITE_ONCE(conn->status, KSMBD_SESS_NEED_SETUP); +} + static inline void ksmbd_conn_set_need_reconnect(struct ksmbd_conn *conn) { WRITE_ONCE(conn->status, KSMBD_SESS_NEED_RECONNECT); diff --git a/fs/smb/server/mgmt/user_session.c b/fs/smb/server/mgmt/user_session.c index 82dcc86a32c5..408f47220c07 100644 --- a/fs/smb/server/mgmt/user_session.c +++ b/fs/smb/server/mgmt/user_session.c @@ -373,12 +373,12 @@ void destroy_previous_session(struct ksmbd_conn *conn, ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_RECONNECT); err = ksmbd_conn_wait_idle_sess_id(conn, id); if (err) { - ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_SETUP); goto out; } ksmbd_destroy_file_table(&prev_sess->file_table); prev_sess->state = SMB2_SESSION_EXPIRED; - ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_SETUP); out: up_write(&conn->session_lock); up_write(&sessions_table_lock); diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 85e7bc3a2bd3..ae47450dc40f 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -1252,7 +1252,7 @@ int smb2_handle_negotiate(struct ksmbd_work *work) } conn->srv_sec_mode = le16_to_cpu(rsp->SecurityMode); - ksmbd_conn_set_need_negotiate(conn); + ksmbd_conn_set_need_setup(conn); err_out: if (rc) @@ -1273,6 +1273,9 @@ static int alloc_preauth_hash(struct ksmbd_session *sess, if (sess->Preauth_HashValue) return 0; + if (!conn->preauth_info) + return -ENOMEM; + sess->Preauth_HashValue = kmemdup(conn->preauth_info->Preauth_HashValue, PREAUTH_HASHVALUE_SIZE, GFP_KERNEL); if (!sess->Preauth_HashValue) @@ -1688,6 +1691,11 @@ int smb2_sess_setup(struct ksmbd_work *work) ksmbd_debug(SMB, "Received request for session setup\n"); + if (!ksmbd_conn_need_setup(conn) && !ksmbd_conn_good(conn)) { + work->send_no_response = 1; + return rc; + } + WORK_BUFFERS(work, req, rsp); rsp->StructureSize = cpu_to_le16(9); @@ -1919,7 +1927,7 @@ int smb2_sess_setup(struct ksmbd_work *work) if (try_delay) { ksmbd_conn_set_need_reconnect(conn); ssleep(5); - ksmbd_conn_set_need_negotiate(conn); + ksmbd_conn_set_need_setup(conn); } } smb2_set_err_rsp(work); @@ -2249,7 +2257,7 @@ int smb2_session_logoff(struct ksmbd_work *work) ksmbd_free_user(sess->user); sess->user = NULL; } - ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_SETUP); rsp->StructureSize = cpu_to_le16(4); err = ksmbd_iov_pin_rsp(work, rsp, sizeof(struct smb2_logoff_rsp)); --

1 month, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror