This fixes an issue that a gadget driver (usb_f_fs) is possible to
stop rx transactions after the usb-dmac is used because the following
functions missed to set/check the "running" flag.
- usbhsf_dma_prepare_pop_with_usb_dmac()
- usbhsf_dma_pop_done_with_usb_dmac()
So, if next transaction uses pio, the usbhsf_prepare_pop() can not
start the transaction because the "running" flag is 0.
Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle")
Cc: <stable(a)vger.kernel.org> # v3.19+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com>
---
drivers/usb/renesas_usbhs/fifo.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 2d24ef3..b295e20 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -989,6 +989,10 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
goto usbhsf_pio_prepare_pop;
+ /* return at this time if the pipe is running */
+ if (usbhs_pipe_is_running(pipe))
+ return 0;
+
usbhs_pipe_config_change_bfre(pipe, 1);
ret = usbhsf_fifo_select(pipe, fifo, 0);
@@ -1179,6 +1183,7 @@ static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
usbhsf_fifo_clear(pipe, fifo);
pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+ usbhs_pipe_running(pipe, 0);
usbhsf_dma_stop(pipe, fifo);
usbhsf_dma_unmap(pkt);
usbhsf_fifo_unselect(pipe, pipe->fifo);
--
1.9.1
From: thongsyho <thong.ho.px(a)rvc.renesas.com>
commit 641307df71fe77d7b38a477067495ede05d47295 upstream.
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
Cc: stable(a)vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com>
Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 53 ++++++++++++++++++++++++++++++----
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 +++++
2 files changed, 55 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 848f7f2..3322b15 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -392,6 +392,31 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
rcrtc->started = true;
}
+static void rcar_du_crtc_disable_planes(struct rcar_du_crtc *rcrtc)
+{
+ struct rcar_du_device *rcdu = rcrtc->group->dev;
+ struct drm_crtc *crtc = &rcrtc->crtc;
+ u32 status;
+ /* Make sure vblank interrupts are enabled. */
+ drm_crtc_vblank_get(crtc);
+ /*
+ * Disable planes and calculate how many vertical blanking interrupts we
+ * have to wait for. If a vertical blanking interrupt has been triggered
+ * but not processed yet, we don't know whether it occurred before or
+ * after the planes got disabled. We thus have to wait for two vblank
+ * interrupts in that case.
+ */
+ spin_lock_irq(&rcrtc->vblank_lock);
+ rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
+ status = rcar_du_crtc_read(rcrtc, DSSR);
+ rcrtc->vblank_count = status & DSSR_VBK ? 2 : 1;
+ spin_unlock_irq(&rcrtc->vblank_lock);
+ if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0,
+ msecs_to_jiffies(100)))
+ dev_warn(rcdu->dev, "vertical blanking timeout\n");
+ drm_crtc_vblank_put(crtc);
+}
+
static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
{
struct drm_crtc *crtc = &rcrtc->crtc;
@@ -400,17 +425,16 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
return;
/* Disable all planes and wait for the change to take effect. This is
- * required as the DSnPR registers are updated on vblank, and no vblank
- * will occur once the CRTC is stopped. Disabling planes when starting
- * the CRTC thus wouldn't be enough as it would start scanning out
- * immediately from old frame buffers until the next vblank.
+ * required as the plane enable registers are updated on vblank, and no
+ * vblank will occur once the CRTC is stopped. Disabling planes when
+ * starting the CRTC thus wouldn't be enough as it would start scanning
+ * out immediately from old frame buffers until the next vblank.
*
* This increases the CRTC stop delay, especially when multiple CRTCs
* are stopped in one operation as we now wait for one vblank per CRTC.
* Whether this can be improved needs to be researched.
*/
- rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
- drm_crtc_wait_one_vblank(crtc);
+ rcar_du_crtc_disable_planes(rcrtc);
/* Disable vertical blanking interrupt reporting. We first need to wait
* for page flip completion before stopping the CRTC as userspace
@@ -548,10 +572,25 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
irqreturn_t ret = IRQ_NONE;
u32 status;
+ spin_lock(&rcrtc->vblank_lock);
+
status = rcar_du_crtc_read(rcrtc, DSSR);
rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
if (status & DSSR_VBK) {
+ /*
+ * Wake up the vblank wait if the counter reaches 0. This must
+ * be protected by the vblank_lock to avoid races in
+ * rcar_du_crtc_disable_planes().
+ */
+ if (rcrtc->vblank_count) {
+ if (--rcrtc->vblank_count == 0)
+ wake_up(&rcrtc->vblank_wait);
+ }
+ }
+ spin_unlock(&rcrtc->vblank_lock);
+
+ if (status & DSSR_VBK) {
drm_crtc_handle_vblank(&rcrtc->crtc);
rcar_du_crtc_finish_page_flip(rcrtc);
ret = IRQ_HANDLED;
@@ -606,6 +645,8 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
}
init_waitqueue_head(&rcrtc->flip_wait);
+ init_waitqueue_head(&rcrtc->vblank_wait);
+ spin_lock_init(&rcrtc->vblank_lock);
rcrtc->group = rgrp;
rcrtc->mmio_offset = mmio_offsets[index];
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 6f08b7e..48bef05 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -15,6 +15,7 @@
#define __RCAR_DU_CRTC_H__
#include <linux/mutex.h>
+#include <linux/spinlock.h>
#include <linux/wait.h>
#include <drm/drmP.h>
@@ -33,6 +34,9 @@
* @started: whether the CRTC has been started and is running
* @event: event to post when the pending page flip completes
* @flip_wait: wait queue used to signal page flip completion
+ * @vblank_lock: protects vblank_wait and vblank_count
+ * @vblank_wait: wait queue used to signal vertical blanking
+ * @vblank_count: number of vertical blanking interrupts to wait for
* @outputs: bitmask of the outputs (enum rcar_du_output) driven by this CRTC
* @group: CRTC group this CRTC belongs to
*/
@@ -48,6 +52,10 @@ struct rcar_du_crtc {
struct drm_pending_vblank_event *event;
wait_queue_head_t flip_wait;
+ spinlock_t vblank_lock;
+ wait_queue_head_t vblank_wait;
+ unsigned int vblank_count;
+
unsigned int outputs;
struct rcar_du_group *group;
--
1.9.1
From: thongsyho <thong.ho.px(a)rvc.renesas.com>
commit 1f8754d4daea5f257370a52a30fcb22798c54516 upstream.
If SSI uses shared pin, some SSI will be used as parent SSI.
Then, normal SSI's remove and Parent SSI's remove
(these are same SSI) will be called when unbind or remove timing.
In this case, free_irq() will be called twice.
This patch solve this issue.
Cc: stable(a)vger.kernel.org
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com>
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com>
---
sound/soc/sh/rcar/ssi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 6cb6db0..9472d99 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -694,9 +694,14 @@ static int rsnd_ssi_dma_remove(struct rsnd_mod *mod,
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+ struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io);
struct device *dev = rsnd_priv_to_dev(priv);
int irq = ssi->irq;
+ /* Do nothing for SSI parent mod */
+ if (ssi_parent_mod == mod)
+ return 0;
+
/* PIO will request IRQ again */
devm_free_irq(dev, irq, mod);
--
1.9.1
From: thongsyho <thong.ho.px(a)rvc.renesas.com>
commit 641307df71fe77d7b38a477067495ede05d47295 upstream.
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
Cc: stable(a)vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com>
Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 54 ++++++++++++++++++++++++++++++----
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 +++++
2 files changed, 56 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 25bdab6..6fab079 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -371,6 +371,31 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
rcrtc->started = true;
}
+static void rcar_du_crtc_disable_planes(struct rcar_du_crtc *rcrtc)
+{
+ struct rcar_du_device *rcdu = rcrtc->group->dev;
+ struct drm_crtc *crtc = &rcrtc->crtc;
+ u32 status;
+ /* Make sure vblank interrupts are enabled. */
+ drm_crtc_vblank_get(crtc);
+ /*
+ * Disable planes and calculate how many vertical blanking interrupts we
+ * have to wait for. If a vertical blanking interrupt has been triggered
+ * but not processed yet, we don't know whether it occurred before or
+ * after the planes got disabled. We thus have to wait for two vblank
+ * interrupts in that case.
+ */
+ spin_lock_irq(&rcrtc->vblank_lock);
+ rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
+ status = rcar_du_crtc_read(rcrtc, DSSR);
+ rcrtc->vblank_count = status & DSSR_VBK ? 2 : 1;
+ spin_unlock_irq(&rcrtc->vblank_lock);
+ if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0,
+ msecs_to_jiffies(100)))
+ dev_warn(rcdu->dev, "vertical blanking timeout\n");
+ drm_crtc_vblank_put(crtc);
+}
+
static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
{
struct drm_crtc *crtc = &rcrtc->crtc;
@@ -379,17 +404,16 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
return;
/* Disable all planes and wait for the change to take effect. This is
- * required as the DSnPR registers are updated on vblank, and no vblank
- * will occur once the CRTC is stopped. Disabling planes when starting
- * the CRTC thus wouldn't be enough as it would start scanning out
- * immediately from old frame buffers until the next vblank.
+ * required as the plane enable registers are updated on vblank, and no
+ * vblank will occur once the CRTC is stopped. Disabling planes when
+ * starting the CRTC thus wouldn't be enough as it would start scanning
+ * out immediately from old frame buffers until the next vblank.
*
* This increases the CRTC stop delay, especially when multiple CRTCs
* are stopped in one operation as we now wait for one vblank per CRTC.
* Whether this can be improved needs to be researched.
*/
- rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
- drm_crtc_wait_one_vblank(crtc);
+ rcar_du_crtc_disable_planes(rcrtc);
/* Disable vertical blanking interrupt reporting. We first need to wait
* for page flip completion before stopping the CRTC as userspace
@@ -528,10 +552,26 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
irqreturn_t ret = IRQ_NONE;
u32 status;
+ spin_lock(&rcrtc->vblank_lock);
+
status = rcar_du_crtc_read(rcrtc, DSSR);
rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
if (status & DSSR_VBK) {
+ /*
+ * Wake up the vblank wait if the counter reaches 0. This must
+ * be protected by the vblank_lock to avoid races in
+ * rcar_du_crtc_disable_planes().
+ */
+ if (rcrtc->vblank_count) {
+ if (--rcrtc->vblank_count == 0)
+ wake_up(&rcrtc->vblank_wait);
+ }
+ }
+
+ spin_unlock(&rcrtc->vblank_lock);
+
+ if (status & DSSR_VBK) {
drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index);
rcar_du_crtc_finish_page_flip(rcrtc);
ret = IRQ_HANDLED;
@@ -585,6 +625,8 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
}
init_waitqueue_head(&rcrtc->flip_wait);
+ init_waitqueue_head(&rcrtc->vblank_wait);
+ spin_lock_init(&rcrtc->vblank_lock);
rcrtc->group = rgrp;
rcrtc->mmio_offset = mmio_offsets[index];
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 2bbe3f5..be22ce3 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -15,6 +15,7 @@
#define __RCAR_DU_CRTC_H__
#include <linux/mutex.h>
+#include <linux/spinlock.h>
#include <linux/wait.h>
#include <drm/drmP.h>
@@ -32,6 +33,9 @@ struct rcar_du_group;
* @started: whether the CRTC has been started and is running
* @event: event to post when the pending page flip completes
* @flip_wait: wait queue used to signal page flip completion
+ * @vblank_lock: protects vblank_wait and vblank_count
+ * @vblank_wait: wait queue used to signal vertical blanking
+ * @vblank_count: number of vertical blanking interrupts to wait for
* @outputs: bitmask of the outputs (enum rcar_du_output) driven by this CRTC
* @enabled: whether the CRTC is enabled, used to control system resume
* @group: CRTC group this CRTC belongs to
@@ -48,6 +52,10 @@ struct rcar_du_crtc {
struct drm_pending_vblank_event *event;
wait_queue_head_t flip_wait;
+ spinlock_t vblank_lock;
+ wait_queue_head_t vblank_wait;
+ unsigned int vblank_count;
+
unsigned int outputs;
bool enabled;
--
1.9.1