- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "raid5: Set R5_Expanded on parity devices as well as data." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled raid5: Set R5_Expanded on parity devices as well as data. to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <… [View More]stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: NeilBrown <neilb(a)suse.com> Date: Tue, 17 Oct 2017 16:18:36 +1100 Subject: raid5: Set R5_Expanded on parity devices as well as data. From: NeilBrown <neilb(a)suse.com> [ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ] When reshaping a fully degraded raid5/raid6 to a larger nubmer of devices, the new device(s) are not in-sync and so that can make the newly grown stripe appear to be "failed". To avoid this, we set the R5_Expanded flag to say "Even though this device is not fully in-sync, this block is safe so don't treat the device as failed for this stripe". This flag is set for data devices, not not for parity devices. Consequently, if you have a RAID6 with two devices that are partly recovered and a spare, and start a reshape to include the spare, then when the reshape gets past the point where the recovery was up to, it will think the stripes are failed and will get into an infinite loop, failing to make progress. So when contructing parity on an EXPAND_READY stripe, set R5_Expanded. Reported-by: Curt <lightspd(a)gmail.com> Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid5.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1681,8 +1681,11 @@ static void ops_complete_reconstruct(voi struct r5dev *dev = &sh->dev[i]; if (dev->written || i == pd_idx || i == qd_idx) { - if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) + if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) { set_bit(R5_UPTODATE, &dev->flags); + if (test_bit(STRIPE_EXPAND_READY, &sh->state)) + set_bit(R5_Expanded, &dev->flags); + } if (fua) set_bit(R5_WantFUA, &dev->flags); if (sync) Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.4/md-cluster-free-md_cluster_info-if-node-leave-cluster.patch queue-4.4/autofs-fix-careless-error-in-recent-commit.patch queue-4.4/raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch queue-4.4/nfsd-fix-nfsd_reset_versions-for-nfsv4.patch queue-4.4/nfsd-fix-nfsd_minorversion-..-nfsd_avail.patch [View Less]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "ppp: Destroy the mutex when cleanup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ppp: Destroy the mutex when cleanup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ppp-destroy-the-mutex-when-cleanup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. … [View More]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, … [View More]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/perf/hv-24x7: Fix incorrect comparison in memord" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/perf/hv-24x7: Fix incorrect comparison in memord to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-perf-hv-24x7-fix-incorrect-comparison-in-memord.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <… [View More]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/opal: Fix EBUSY bug in acquiring tokens" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/opal: Fix EBUSY bug in acquiring tokens to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.… [View More]org> know about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: "William A. Kennington III" <wak(a)google.com> Date: Fri, 22 Sep 2017 16:58:00 -0700 Subject: powerpc/opal: Fix EBUSY bug in acquiring tokens From: "William A. Kennington III" <wak(a)google.com> [ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ] The current code checks the completion map to look for the first token that is complete. In some cases, a completion can come in but the token can still be on lease to the caller processing the completion. If this completed but unreleased token is the first token found in the bitmap by another tasks trying to acquire a token, then the __test_and_set_bit call will fail since the token will still be on lease. The acquisition will then fail with an EBUSY. This patch reorganizes the acquisition code to look at the opal_async_token_map for an unleased token. If the token has no lease it must have no outstanding completions so we should never see an EBUSY, unless we have leased out too many tokens. Since opal_async_get_token_inrerruptible is protected by a semaphore, we will practically never see EBUSY anymore. Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion") Signed-off-by: William A. Kennington III <wak(a)google.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/powernv/opal-async.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/powerpc/platforms/powernv/opal-async.c +++ b/arch/powerpc/platforms/powernv/opal-async.c @@ -39,18 +39,18 @@ int __opal_async_get_token(void) int token; spin_lock_irqsave(&opal_async_comp_lock, flags); - token = find_first_bit(opal_async_complete_map, opal_max_async_tokens); + token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens); if (token >= opal_max_async_tokens) { token = -EBUSY; goto out; } - if (__test_and_set_bit(token, opal_async_token_map)) { + if (!__test_and_clear_bit(token, opal_async_complete_map)) { token = -EBUSY; goto out; } - __clear_bit(token, opal_async_complete_map); + __set_bit(token, opal_async_token_map); out: spin_unlock_irqrestore(&opal_async_comp_lock, flags); Patches currently in stable-queue which might be from wak(a)google.com are queue-4.4/powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch [View Less]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/ipic: Fix status get and status clear" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/ipic: Fix status get and status clear to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-ipic-fix-status-get-and-status-clear.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org… [View More]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the … [View More]stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Wed, 1 Nov 2017 18:42:45 +0100 Subject: platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() From: Markus Elfring <elfring(a)users.sourceforge.net> [ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ] Source code review for a specific software refactoring showed the need for another correction because the error code "-1" was returned so far if a call of the function "sony_call_snc_handle" failed here. Thus assign the return value from these two function calls also to the variable "err" and provide it in case of a failure. Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw") Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Link: https://lkml.org/lkml/2017/10/31/463 Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg(a)mail.gmail.com> Signed-off-by: Markus Elfring <elfring(a)users.sourceforge.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/sony-laptop.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1655,17 +1655,19 @@ static int sony_nc_setup_rfkill(struct a if (!rfk) return -ENOMEM; - if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } hwblock = !(result & 0x1); - if (sony_call_snc_handle(sony_rfkill_handle, - sony_rfkill_address[nc_type], - &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, + sony_rfkill_address[nc_type], + &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } swblock = !(result & 0x2); Patches currently in stable-queue which might be from elfring(a)users.sourceforge.net are queue-4.4/platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch [View Less]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "pinctrl: adi2: Fix Kconfig build problem" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pinctrl: adi2: Fix Kconfig build problem to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pinctrl-adi2-fix-kconfig-build-problem.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know … [View More]about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Wed, 11 Oct 2017 11:57:15 +0200 Subject: pinctrl: adi2: Fix Kconfig build problem From: Linus Walleij <linus.walleij(a)linaro.org> [ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ] The build robot is complaining on Blackfin: drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup': >> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing pointer to incomplete type 'struct gpio_port_t' writew(readw(&regs->port_fer) & ~BIT(offset), ^~ drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq': >> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing pointer to incomplete type 'struct bfin_pint_regs' if (readl(&regs->invert_set) & pintbit) ^~ It seems the driver need to include <asm/gpio.h> and <asm/irq.h> to compile. The Blackfin architecture was re-defining the Kconfig PINCTRL symbol which is not OK, so replaced this with PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2 just like most arches do. Further, the old GPIO driver symbol GPIO_ADI was possible to select at the same time as selecting PINCTRL. This was not working because the arch-local <asm/gpio.h> header contains an explicit #ifndef PINCTRL clause making compilation break if you combine them. The same is true for DEBUG_MMRS. Make sure the ADI2 pinctrl driver is not selected at the same time as the old GPIO implementation. (This should be converted to use gpiolib or pincontrol and move to drivers/...) Also make sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at the same time as the new PINCTRL implementation, and only make PINCTRL_ADI2 selectable for the Blackfin families that actually have it. This way it is still possible to add e.g. I2C-based pin control expanders on the Blackfin. Cc: Steven Miao <realmz6(a)gmail.com> Cc: Huanhuan Feng <huanhuan.feng(a)analog.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/blackfin/Kconfig | 7 +++++-- arch/blackfin/Kconfig.debug | 1 + drivers/pinctrl/Kconfig | 3 ++- 3 files changed, 8 insertions(+), 3 deletions(-) --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -318,11 +318,14 @@ config BF53x config GPIO_ADI def_bool y + depends on !PINCTRL depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) -config PINCTRL +config PINCTRL_BLACKFIN_ADI2 def_bool y - depends on BF54x || BF60x + depends on (BF54x || BF60x) + select PINCTRL + select PINCTRL_ADI2 config MEM_MT48LC64M4A2FB_7E bool --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -17,6 +17,7 @@ config DEBUG_VERBOSE config DEBUG_MMRS tristate "Generate Blackfin MMR tree" + depends on !PINCTRL select DEBUG_FS help Create a tree of Blackfin MMRs via the debugfs tree. If --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,7 +26,8 @@ config DEBUG_PINCTRL config PINCTRL_ADI2 bool "ADI pin controller driver" - depends on BLACKFIN + depends on (BF54x || BF60x) + depends on !GPIO_ADI select PINMUX select IRQ_DOMAIN help Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.4/pinctrl-adi2-fix-kconfig-build-problem.patch [View Less]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "perf symbols: Fix symbols__fixup_end heuristic for corner cases" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf symbols: Fix symbols__fixup_end heuristic for corner cases to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-symbols-fix-symbols__fixup_end-heuristic-for-corner-cases.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, … [View More]please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: Daniel Borkmann <daniel(a)iogearbox.net> Date: Wed, 15 Mar 2017 22:53:37 +0100 Subject: perf symbols: Fix symbols__fixup_end heuristic for corner cases From: Daniel Borkmann <daniel(a)iogearbox.net> [ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ] The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.148961436… Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/symbol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -200,7 +200,7 @@ void symbols__fixup_end(struct rb_root * /* Last entry */ if (curr->end == curr->start) - curr->end = roundup(curr->start, 4096); + curr->end = roundup(curr->start, 4096) + 4096; } void __map_groups__fixup_end(struct map_groups *mg, enum map_type type) Patches currently in stable-queue which might be from daniel(a)iogearbox.net are queue-4.4/perf-symbols-fix-symbols__fixup_end-heuristic-for-corner-cases.patch [View Less]

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI/PME: Handle invalid data when reading Root Status" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/PME: Handle invalid data when reading Root Status to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-pme-handle-invalid-data-when-reading-root-status.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)… [View More]vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:47:43 CET 2017 From: Qiang <zhengqiang10(a)huawei.com> Date: Thu, 28 Sep 2017 11:54:34 +0800 Subject: PCI/PME: Handle invalid data when reading Root Status From: Qiang <zhengqiang10(a)huawei.com> [ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ] PCIe PME and native hotplug share the same interrupt number, so hotplug interrupts are also processed by PME. In some cases, e.g., a Link Down interrupt, a device may be present but unreachable, so when we try to read its Root Status register, the read fails and we get all ones data (0xffffffff). Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e., "some device has asserted PME," so we scheduled pcie_pme_work_fn(). This caused an infinite loop because pcie_pme_work_fn() tried to handle PME requests until PCI_EXP_RTSTA_PME is cleared, but with the link down, PCI_EXP_RTSTA_PME can't be cleared. Check for the invalid 0xffffffff data everywhere we read the Root Status register. 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from non-existent devices") added similar checks in the hotplug driver. Signed-off-by: Qiang Zheng <zhengqiang10(a)huawei.com> [bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow other similar checks] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pcie/pme.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -233,6 +233,9 @@ static void pcie_pme_work_fn(struct work break; pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); + if (rtsta == (u32) ~0) + break; + if (rtsta & PCI_EXP_RTSTA_PME) { /* * Clear PME status of the port. If there are other @@ -280,7 +283,7 @@ static irqreturn_t pcie_pme_irq(int irq, spin_lock_irqsave(&data->lock, flags); pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); - if (!(rtsta & PCI_EXP_RTSTA_PME)) { + if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) { spin_unlock_irqrestore(&data->lock, flags); return IRQ_NONE; } Patches currently in stable-queue which might be from zhengqiang10(a)huawei.com are queue-4.4/pci-pme-handle-invalid-data-when-reading-root-status.patch [View Less]

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror